Construction Of Bhakta Niwara and Devsthan to Surkundi Road at Ramcharan Baba Sansthan Falegaon Tq. Washim Dist Washim

Construction Of Bhakta Niwara & Devsthan to Surkundi Road at Ramcharan Baba Sansthan Falegaon Tq. Washim Dist Washim

Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated materials up to a distance of 50 m beyond the building area and stacking and/or spreading as directed, dewatering manually, preparing the bed for the foundation and necessary backfilling, ramming, watering including shoring and strutting as necessary complete. A) Excluding Dewatering i) Lift upto 1.50m. [Spec.No. : Bd.A. 1 Page No. 259].

Excavation for foundation in earth, soils of all types, sand,gravel and soft murum, including removing the excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift from 1.5m to 3.0m) By Mechanical Means

Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) [Bd. E. 1 P.No. 287] (S.S.R.I.No. 24.01)

Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete. [Spec.No. : As directed by Engineer incharge.] (S.S.R. I.No. 21.4 )

Providing and laying in situ /Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) [Bd.F.3 P.No. 298 and B.7, P.No.38] (S.S.R.I.No. 25.11)

Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) [Bd.F.5 Page No. 300 and B.7, Page.No. 38] (S.S.R.I.No. 25.31)

Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) [Bd.F.6/Page No.300/I.S. 456 (2000)]

Filling in plinth and floors with contractor's approved material / murum / stone dust in 15cm to 20cm layers including watering and compaction etc complete. [Spec.No. : Bd.A. 11 Page No. 263]

Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. Bd.F.17, Page No. 306

Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete.

Providing and applying two coats of exterior acraylic emulsion paint confirming to corresponding I.S. of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface, applying primer coat ,scaffolding if necessary , and watering the surface for two days etc complete.

Providing & fixing colour coated Zincalume ( R ) AZ150 (min 150 gms/sq.mt total on each side) profiled sheets for roofing the feed material is manufactured outof nominal 0.45mm base metal thickness (BMT) (0.5mm TCT) Hi-strength steel with min550 MPa yield strength metallic hot dip coated with aluminium -zinc alloy (55% aluminium 43.4% zinc 1.6% silicon) with colorbond (R) steel quality super durable polyester paint coat (with inorganic pigment) The paint shall have a total coating thickness of nominal 35 um comprising of nominal 25um exterior coat on top surface & nominal 10um reverse coat on back surface Profile sheet shall have nom 950-1050mm effective cover width & nominal 25-30mm deep ribs with subtle square fluting in the five pan at nominal 180-250mm C/C The end rib shall be designed for anti-capillary groove & return leg The feed material should have coil manufacturers product details marked a regular interval Including fasteners with min fastened with min 25um Zinc-Tin alloy coated Hex head self-drilling screw etc complete (weight of profile 4.52 kg/sqm) (S.S.R.I.No. 38.34 P.No. 227)

Providing structural steel work in trusses, other similar trussed purlins and members with all bracing, gusset plates etc. as per detailed designs and drawings or as directed including cutting, fabricating, hoisting, erecting fixing in position, Making riveted/ bolted/ welded connection and one coat of anticorrosive paint and over it 2 coats of oil painting approved quality and shade etc. complete.

Supplying trap/granite/quartzite/gneiss stone metal of required size by bringing the boulders/Rubble at the road side breaking them to required gradation including conveying the boulders/Rubble & stacking the broken metal etc complete (Prior approval of sample stack of broken metal by the Ex. Engineer is necessary the date of approval will form part of the measurements) a)80 mm Metal By breaking Boulders (Hand broken) [As directed by Engineer incharge] (S.S.R.I.No. 50.57)

Supplying hard murum/ kankar at the road site, including conveying and stacking complete. [MORTH 408] (S.S.R.I.No. 2.29)

Spreading 80/40 mm metal for road work including sectionong etc complete as directed by Engineer in charge . [As directed by Engineer-in-charge] (S.S.R.I.No. 50.58)

Spreading gravel / sand / soft murum /avilable murum over rubble soling /W.B.M.surface blanketing berms etc.complete. [Spec.No. :Rd.28 Page No. 205] (S.S.R.I.No. 2.30)

Compacting the sub grade/gravel/oversize metal (200 mm loose) layers for all width with Power roller having weight 8 to 10 MT. including necessary, labour, materials and artificial watering complete. [As directed by Engineer-in-charge] (S.S.R.I.No. 50.59)

Compacting the hard murum side widths including laying in layers on each side with vibratory roller including artificial watering etc. complete. [MORTH 408] (S.S.R.I.No. 2.31)

Please Enable Macros to View BoQ information