REPAIR TO PETTY WORK, DAY TO DAY SANITARY AND JOINERY RELATED COMPLAINTS IN ZONE-I UNDER AGE B/R-I OF GE (NORTH) MEERUT CANTT

Amount

Material & labour for powder coated GI frame work(snap grid) suitable for size as in false ceiling of size 605mm x 605mm including fixing 4mm thick gypsum board/E board in ceiling size 60cm x 60cm fixed to metalic snap gird and dismantling wall and ceiling boards or insulation boards/slabs any thickness including cover fillets, consisting of followings and all as directed:-i) Powder coated GI sections incorporated in frame work shall conform to designation 63400 given in IS: 737-1986. ii) The snap grid shall consist of powder coated main /cross tee of size 36.5mmx25mmx1.0mm thick and 25mm x 25m x1.0mm thick, respectively. iii) Snap grid frame shall be fixed to ceiling with supporting hangers consisting of S & F 2mm to 4mm dia mild steel GI wire. iv) The main and cross tees shall be jointed at junction/crossings with powder coated GI angle bracket, of size 15mmx15mmx1.0mm thick, fixed with suitable mild steel, bolts, nuts and washers all as per manufacturer’s instructions. v) The snap grid (main/cross tee section) shall be supported at ends all along the wall with powder coated GI angle of size 25mmx25mmx1.0 mm anodized thick. vi) Size of the snap grid shall be 605mm by 605mm.

Material and labour as in repair for standard kit of PVC internal fittings for low level flushing cistern fixed complete all as specified and directed.

Taking up or down steel tubing and connection 15 mm bore pipe and removing from site complete all as specified and directed.

All as per item No 3 above but 20 mm bore pipe complete all as specified and directed.

Supplying and laying of CPVC 25mm outer dia pipes SDR 11 & Plain CPVC SDR 11, with all fittings and fixed on walls/ceiling or laying in floors ,testing complete all as specified and directed.

Supplying and laying of Hot and Cold CPVC 20mm outer dia pipes SDR 11 & Plain CPVC SDR 11, with all fittings and fixed on walls/ceiling or laying in floors, testing complete all as specified & directed.

S&F as in repair 15mm bore pillar tap, long shank, swan neck, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts complete all as specified & directed.

S&F as in repair 15 mm bore bib tap long body chromium plated, cast copper alloy, with crutch or butterfly handle, flange, screwed down for iron pipe or for brass ferrule, complete all as specified and directed.

Supply & fix in repair wall mixer brass chromium plated for mixing hot and cold water screwed for iron pipe suitable for 15mm bore pipes complete all as specified and directed.

S&F in repair 15 mm dia stop cock/angle cock cast copper alloy chromium plated screwed down high pressure with crutch or butterfly handle, flench screwed both ends for iron or for union complete all as specified and directed.

S&F in repairs 15 mm thick Bip tap standard of PTMT any colour screwed for iron pipe and fixed (Minimum weight 15mm - 90gms/20mm-125gms) complete all as specified and directed.

S&F as in repair vitreous china squatting pan Orissa pattern, size 580 x 440mm, white, with integral footrest, including flushing cistern & flush pipe fixed as in repair with ‘P’ or ‘S’ trap, including making good the disturbed surfaces and to match with existing surface complete all as specified and directed.

S&F as in repair vitreous china wash down water closet pan (pedestal pattern), white (flushing cistern and flush pipe) fixed with ‘P’ or ‘S’ trap, including making good the disturbed surfaces and to match with existing surface complete all as specified and directed.

Supply and fixing as in repair PVC valve less syphonic action type flushing cistern low level white with PVC in let ball valve, float and handle, 10 ltrs capacity and connection to pipes including 32mm dia PVC long bend for squat pattern etc , set with concrete and making good to floor. complete all as specified and directed.

Supply & fix in repair white plastic seat cover for W.C.(E.T.) white including M.S. CP or aluminium hinging device complete all as specified and directed.

S&F as in repair Vitreous China wash basin, white, flat back, size 550 x 400 mm, including fixing acessories like galvanised brackets & rag bolts,32 mm CP waste coupling complete all as specified and directed.

Supply & fix in repairs chromium plated shower roses with swivel joints of 75mm size complete all as specified & directed.

S&F in repair chromium plated Jet spray with suitable flexible pipe to EWC for 15mm bore with fittings, complete all as specified and directed.

S & F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.

Supply & fix in repairs PVC connections of 450mm long Make suitable for 15mm dia iron pipe including PTMT nuts complete all as specified & directed.

Supply and fix in repairs PVC waste pipes of 40/32mm bore suitable for wash hand basins/sinks complete all as specified & directed.

S&F in reipair CP towel rail brass 20mm dia 600mm long with bracket CP finish complete all as specified and directed.

S&F in repair Glass Corner Shelf fitted in wall with screws complete all as specified and directed

Supply & fixing in rotational moulded polyethylene water storage tanks 500 liters capacity, (cylindrical, vertical in closed top) hoisted and fixed in position with all fittings all as specified including 20 mm PVC ball valve including dismantling existing water tanks complete all as specified & directed.

Supply & fixing in rotational moulded polyethylene water storage tanks 1000 liters capacity, (cylindrical, vertical in closed top) hoisted and fixed in position with all fittings all as specified including 20 mm PVC ball valve including dismantling existing water tanks complete all as specified & directed.

S&F in repair 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20mm-210gms./ 25mm-455gms/ 40mm- 690 gms) complete all as specified and directed.

S&F in repair Gun metal globe or gate valves with Iron wheel head screwed both ends for iron pipe 15 mm dia complete all as specified and directed.

S&F in repair Gun metal globe or gate valves with Iron wheel head screwed both ends for iron pipe 20 mm dia complete all as specified and directed.

Supply and fix in repair PVC (SWR) Pipes single socketed in any length with rubber ring joints, fixed to walls etc. 75mm bore as in waste and rain water pipes including stack clamps made out of 25mm by 5mm flat iron and 16mm dia round iron stays including bolts & nuts, laid complete all as specified & directed.

Supply and fix in repair PVC (SWR) Pipes single socketed in any length with rubber ring joints, fixed to walls etc. 110 mm bore as in waste and rain water pipes including stack clamps made out of 25mm by 5mm flat iron and 16mm dia round iron stays including bolts & nuts, laid complete all as specified & directed.

Supply and fix in repair PVC (SWR) bends 75mm bore, any radius complete all as specified & directed.

Supply and fix in repair PVC (SWR) bends 110 mm bore, any radius complete all as specified & directed.

Supply and fix in repair for 75mm bore PVC (SWR) floor traps plain with grating fixed in repairs including jointing with solvent cement complete all as specified & directed.

S&F 15 mm bore concealed stop cock, chromium plated, cast copper alloy, screwed down with crutch or butterfly handle screwed both ends, as in repair including flench complete all as specified & directed.

Material & labour for double charged vitrified coloured tiles of size exc 0.18 Sqm but n.exc 2 Sqm having thickness specified by the manufacturer ,(size as directed by Engineer-in-charge) coloured, in floor set and jointed in neat cement slurry and pointed in white/coloured cement to match in floor over and including 15mm thick cement screed bed of CM (1:6) including Dismantling of old tiles of any size complete all as specified & directed.

M&L Non - Skid Coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick cement screed bed or bedding layer in CM 1:6 complete all as specified & directed.

M&L for white Glazed ceramic tiles in vertical surface 350x 250x 7mm / 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 15mm thick rendering in CM 1:6 complete all as specified & directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified & directed.

Taking down cement plaster from brick walls or concrete surfaces including raking out joints, hacking out for key, scrubbing down with water complete all as specified and directed and removing rubbish etc. complete all as specified and directed.

M&L rendering 15mm thick in patchy on fair faces of brick work or concrete surfaces finished even and fair on walls in cement mortar (1:4), complete all as specified & directed.

M&L Rendering 5 mm thick on fair faces of concrete surfaces, finished even and smooth on ceiling in cement mortar (1:3), complete all as specified & directed.

M&L three coats of white washing on new ceiling/chajja surfaces including preparation of complete all as specified & directed.

Materials & labour for preparation of newly plastered surface of wall etc and applying two coat of cement base paint, any colour over and including primer/putty to match the existing as required, complete all as specified & directed.

S&F in repair brass spindlle of15/20 mm for CP bib taps/angle cock/pillar taps etc complete all as specified & directed.

Material and labour for rectifying the leakage of wall mixer/wash hand basin/sink mixer including replacement of brass spindle & PVC washers necessary fixtures etc complete all as specified and directed.

Material and labour for reparing of old wooden doors by repairing projecting/friction, type hinges, handle, bolts etc as required and providing new as required complete all as specified and directed

Easing of window shutters/CB (One unit shall comprise of one complete window/CB/Showcase irrespective of number of leaves) to ensure smooth closing/opening including tightening of hinges, adjustement of tower bolts, sliding bolt etc complete all as specified & directed.

Petty repairs to low level flushing cistern adjustement of syphon, replacement of washer, asjustement of handle, float valve as requried making the cistern functional complete all as specified & directed.

Petty repairs to bib taps, pillar taps, stop cocl angle valves etc concealed stop cock etc for stopping leakage of water by replacing washer etc complete all as specified and directed.

Removal of air lock, blocking in water pipes/bib taps/stop valve incl cleaning pipes as requried and as directed to ensure proper flow of water complete all as specified & directed.

Removal of blockage in rain water pipe by cleaning grating and rodding in pipes, refixing gratting in position complete all as specified and directed.

S&F in repairs PVC lid (cover) for 500/1000 Ltrs capacity PVC water storage tanks complete all as specified & directed.

S&F in repair 15 mm dia brass chromium plated central hole wash basin mixture, fancy type with or without lettered 'Hot' or 'Cold' ,with long screwed shanks and fly nut capstanhead screwed for 15mm dia pipe fixed in repair complete all as specified and directed.

S&F in repair 15mm dia chromium plated fancy type sink mixer with swinging spout (wall mounted model) fixing and connection to pipes complete all as specified and as directed.

Taking down chowkhats or frame exceeding 1.5 Sq. m but not exceeding 4 Sq. m each with shutters without taking off shutters from the frame, complete all as specified & directed.

Taking down chowkhats or frame not exceeding 1.5 Sq. m each with shutters without taking off shutters from the frame complete all as specified & directed.

Taking down of shutter of any description exc. 1 Sqm & n.exc. 2 Sqm each complete all as specified and directed .

Factory made pressed steel frames, conforming to IS, having profile 125 mm x 60 mm for doors with one or more rebates made out of 1.25 mm thick mild steel sheet, including necessary fixing lugs, butt hinges, lock strike plate, including filling PCC 1:3:6 type C-0 etc, complete, as specified, supplied and fixed complete all as specified & directed.

Factory made pressed steel frames, conforming to IS, having profile 105 mm x 60 mm for doors with one or more rebates made out of 1.25 mm thick mild steel sheet, including necessary fixing lugs, butt hinges, lock strike plate, including filling PCC 1:3:6 type C-0 etc, complete, as specified, supplied and fixed complete all as specified & directed.

S&F for flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, 30 mm thick, ISI marked, complete all as specified & directed.

M&L for gauzed shutter made out of box section with outer and locked frame of size 60mmx35mm (medium grade). The shutter shall be of pressed steel including fixing of 10 mm Square gaurd Bars (06 Nos in Horizontal directions & 05 Nos in Verical direction complete with fly proof wire mash having 0.63mm nominal dia wire and 1.40mm average width of aperture including two coats of synthetic enamel paint over a coat of red oxide primer including one sliding door bolt , handle and tower bolt complete all as specfied and directed by Engineer in charge.

S&F Aluminium, anodized barrel tower bolts of extruded section and fixed, 200 mm long, dia of bolt not less than 10 mm, ISI marked, complete all as specified & directed.

S&F aluminium anodized handle of size 200 mm long ISI marked, complete all as specified & directed.

S&F aluminium alloy, anodised, sliding door bolt 250mm size with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed ISI marked complete all as specified & directed.

Material & labour for preparation of new or previously untreated steel surface of any description over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Material & labour for preparation of new or previously untreated wooden surfaces of any description, not otherwise described over 10cm width or girth and apply two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed .

S&F Steel windows box type using 'P' section comprising double frame for gauge and glazed skelton shutter jointly with flat iron 40x3mm complete including hinges, handle, tower bolts, stops, lugs etc all as shown on drawing.Note (i) For the perpose of measurement & payment double shutter with frame shall be considered as one unit (ii) Unit rate quoted against this item shall also include the iron mongreries shown on drgs (iii) gaurd bars glazing & Wire mesh shall be measured and paid for separately complete all as specified and directed.

S&F steel ventilators fixed type with glazing bars complete all as specified and directed.

Solid PVC Door frame of size 50mm x 47mm made out of 5mm PVC sheet reinforced suitable for solid PVC door suppling & fixing in opening, complete all as specified & directed.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles & plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles, & rails with suitable PVC sheet beading, & joined together with solvent cement, in the frame at site as per specification & drawing.

S&F heavy weight butt hinges cold rolled mild steel 100mm in size complete all as specified and directed.

S&F 3mm thick sheet glass ordinary quality any size and in any type of frame and glazing with oil putty (or beading ) in square n.exc 0.5 Sqm in each panes including hacking out old glass complete all as specified & directed.

S&F 3mm thick sheet glass ordinary quality any size and in any type of frame and glazing with oil putty (or beading ) in square n.exc 0.5 Sqm in each panes complete all as specified and directed.

S&F as in repair Galvanized MS wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm and including fixed with wooden beading for securing wire gauge with wire stapples complete all as specified and directed.

S&F Galvanized MS wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm and including fixed with wooden beading for securing wire gauge with wire stapples complete all as specified and directed.

M&L Framed work such as grills, angle grating etc. with ends of bars shouldered and or riveted or forged into spikes, framed guard bars, railings and similar work confirming to Fe-290 Grade-165E, complete all as specified & directed.

S&F in repair mortise lock including necessary arrangements for removal and fixing complete as as specified and directed

Material & Labour for repair to 18/19 mm thick prelaminated particle boards, grade 2 quality, interior grade, commercial type fixed with nails to timber frame work as in cupboard shelves, kitchen, cupboards etc as in repair complete all as specified and directed.

S & F in repair tank lid/ cover made out of with 0.63mm thick PGI sheet, 470mm dia suitable for fixing in water tank capacity 500/1000 ltrs incl 4 sides fastening arrangements with nut and washer having exposed surface sharp edges 08 nos stings by cutting/rivetting of PGI sheets to protect by monkeys menace complete as per sample, complete all as specified and directed.

M/S KAPIL ENTERPRISES (BID ID -3504054)

Madan Lal Jain and Sons (BID ID -3509560)

Shri Kanchan Engineers (BID ID -3509826)