GE(U)/CHM-18/2021-22 - PROVN OF COMPREHENSIVE MAINTENANCE OF DISTRIBUTION WATER SUPPLY ASSETS SUCH AS CENTRIFUGAL PUMPS, MOTORS, BOOSTER PUMPS, STARTERS AND OTHER MISC WORKS OF WATER SUPPLY INSTALLATIONS AT CHANDIMANDIR CANTT

Amount

Taking down carefully centrifugal pump set 100/120 HP by disconnecting the pump from motor after unscrewing nuts/ bolts of coupling, foundation, inlet, delivery pipes and shifting of pump to workshop for repair/ servicing, comprising strip opening of pump, replacement of any defective parts, re-assembling and shifting from workshop to site, re-installation at location as directed by Engr-in-Charge, testing on load, complete all as specified and as directed. (Supply of spare parts shall be measured and paid for separately under respective items here-in-after). Make of Pumps: Kirloskar, Mather Platt or any make as per site.

Supply only pump shaft sleeve made of gun metal suitable for 100/120 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only key for main shaft/impeller (SS-410) suitable for 100 / 120 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only check nut suitable for 100/120 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only stuffing box bush suitable for 100/120 HP motor pump as per manufacturer's design complete all as specified and as directed.

Remetaling of shaft, turning, grinding as per the required size and polishing including provision of neck rings of impellers complete all as specified and directed.

Supply only water seal suitable for 100/120 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only stuffing box packing and greasing suitable for 100 /120 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only pump set bearing housing DE/NDE of CI grade FG 210 suitable for 100/120 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only tyre coupling complete set of suitable size (TC-14/15/16 or any other as per site requirement) suitable for 100/120 HP motor pump incl boring as per shaft size as per manufacturer's design complete all as specified and as directed. Make: Fenner/ Lovejoy/ Unimac

Supply only bronze impeller suitable for 100/120 HP pump all as per manufacturer's design as per staging and eye of the impeller complete all as per specified and directed.

Supply only ball bearing (roller/ thrust/ any other type) DE/NDE suitable for 100/120HP motor pump as per manufacturer's design complete all as specified and as directed. Make: NBC/ TATA/ SKF Note: All the items/parts mentioned Sr No 1.01 to 1.10 here-in-before shall be suitable/ compatible for the type and make of pumping set as mentioned against each item and cost of fixing of items shall deemed to be included in the quoted rate of Srl item No.1

Taking down carefully centrifugal pump set 75 HP by disconnecting the pump from motor after unscrewing nuts/ bolts of coupling, foundation, inlet, delivery pipes and shifting of pump to workshop for repair/ servicing, comprising strip opening of pump, replacement of any defective parts, re-assembling and shifting from workshop to site, re-installation at location as directed by Engineer-in-Charge, testing on load, complete all as specified and as directed. (Supply of spare parts shall be measured and paid for separately under respective items here-in-after) Make of Pumps : Kirloskar, Mather Platt or any make as per site.

Supply only pump shaft sleeve made of gun metal suitable for 75 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only key for main shaft/impeller (SS 410) suitable for 75 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only check nut suitable for 75 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only stuffing box bush/latern ring suitable for 75 HP motor pump as per manufacturer's design complete all as specified and as directed.

Remetaling of shaft, turning, grinding as per the required size and polishing including provision of neck rings of impellers suitable for 75 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only motor pump MS copuling of suitable size, pin and bush type complete with bush nut, bolts etcc suitable for 75 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only water seal suitable for 75 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only stuffing box packing and greasing suitable for 75 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only pump set bearing housing DE/NDE of CI grade FG 210 suitable for 75 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only tyre coupling complete set of suitable size (TC-14/15/16 or any other as per site requirement) suitable for 75 HP motor pump incl boring as per shaft size as per manufacturer's design complete all as specified and as directed. Make: Fenner/ Lovejoy/ Unimac

Supply only bronze impeller suitable for 75 HP pump all as per manufacturer's design as per staging and eye of the impeller complete all as per specified and directed.

Supply only ball bearing (roller/ thrust/ any other type) DE/NDE suitable for 75 HP motor pump as per manufacturer's design complete all as specified and as directed. Make: NBC/ TATA/ SKF Note: All the items/parts mentioned Srl 2.01 to 2.11 here-in-before shall be suitable/ compatible for the type and make of pumping set as mentioned against each item and cost of fixing of items shall deemed to be included in the quoted rate of Srl item No. 2

Taking down carefully centrifugal pump set 60 HP by disconnecting the pump from motor after unscrewing nuts/ bolts of coupling, foundation, inlet, delivery pipes and shifting of pump to workshop for repair/ servicing, comprising strip opening of pump, replacement of any defective parts, re-assembling and shifting from workshop to site, re-installation at location as directed by Engineer-in-Charge, testing on load, complete all as specified and as directed. (Supply of spare parts shall be measured and paid for separately under respective items here-in-after) Make of Pumps : Kirloskar, Mather Platt or any make as per site.

Supply only pump shaft sleeve made of gun metal suitable for 60 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only key for main shaft/impeller (SS 410) suitable for 60HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only check nut suitable for 60 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only stuffing box bush suitable for 60 HP motor pump as per manufacturer's design complete all as specified and as directed.

Remetaling of shaft, turning, grinding as per the required size and polishing including provision of neck rings of impellers suitable for 60 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only water seal suitable for 60 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only stuffing box packing and greasing suitable for 60 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only tyre coupling complete set of suitable size (TC-14/15/16 or any other as per site requirement) suitable for 75 HP motor pump incl boring as per shaft size as per manufacturer's design complete all as specified and as directed. Make: Fenner/ Unique/ Unimac

Supply only pump set bearing housing DE/NDE of CI grade FG 210 suitable for 60 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only ball bearing (roller/ thrust/ any other type) DE/NDE suitable for 50 HP motor pump as per manufacturer's design complete all as specified and as directed. Make: NBC/ TATA/ SKF Note: All the items/parts mentioned srl 3.01 to 3.10 here-in-before shall be suitable/ compatible for the type and make of pumping set as mentioned against each item and cost of fixing of items shall deemed to be included in the quoted rate of Srl item No. 3

Taking down carefully centrifugal pump set 50 HP by disconnecting the pump from motor after unscrewing nuts/ bolts of coupling, foundation, inlet, delivery pipes and shifting of pump to workshop for repair/ servicing, comprising strip opening of pump, replacement of any defective parts, re-assembling and shifting from workshop to site, re-installation at location as directed by Engineer-in-Charge, testing on load, complete all as specified and as directed. (Supply of spare parts shall be measured and paid for separately under respective items here-in-after) Make of Pumps : Kirloskar, Mather Platt or any make as per site.

Supply only pump shaft sleeve made of gun metal suitable for 50 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only key for main shaft/impeller (SS 410) suitable for 50 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only check nut suitable for 50 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only stuffing box bush suitable for 50 HP motor pump as per manufacturer's design complete all as specified and as directed.

Remetaling of shaft, turning, grinding as per the required size and polishing including provision of neck rings of impellers suitable for 50 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only water seal suitable for 50 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only stuffing box packing and greasing suitable for 50 HP motor pump as per manufacturer's design complete.

Supply only pump set bearing housing DE/NDE of CI grade FG 210 suitable for 50 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only ball bearing (roller/ thrust/ any other type) DE/NDE suitable for 50 HP motor pump as per manufacturer's design complete all as specified and as directed. Make : NBC/ TATA/ SKF Note: All the items/parts mentioned srl 4.01 to 4.09 here-in-before shall be suitable/ compatible for the type and make of pumping set as mentioned against each item and cost of fixing of items shall deemed to be included in the quoted rate of item No. 4

Taking down carefully centrifugal pump set 30 HP by disconnecting the pump from motor after unscrewing nuts/ bolts of coupling, foundation, inlet, delivery pipes and shifting of pump to workshop for repair/ servicing, comprising strip opening of pump, replacement of any defective parts, re-assembling and shifting from workshop to site, re-installation at location as directed by Engr-in-Charge, testing on load, complete all as specified and as directed. (Supply of spare parts shall be measured and paid for separately under respective items here-in-after) Make of Pumps : Kirloskar, Mather Platt or any make as per site.

Supply only pump shaft sleeve made of gun metal suitable for 30 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only key for main shaft/impeller (SS 410) suitable for 30 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only check nut suitable for 30 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only stuffing box bush suitable for 30 HP motor pump as per manufacturer's design complete all as specified and as directed.

Remetaling of shaft, turning, grinding as per the required size and polishing including provision of neck rings of impellers suitable for 30 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only water seal suitable for 30 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only stuffing box packing and greasing suitable for 30 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only pump set bearing housing DE/NDE of CI grade FG 210 suitable for 30 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only ball bearing (roller/ thrust/ any other type) DE/NDE suitable for 30 HP motor pump as per manufacturer's design complete all as specified and as directed. Make: NBC/ TATA/ SKF Note: All the items/parts mentioned srl 5.01 to 5.09 here-in-before shall be suitable/ compatible for the type and make of pumping set as mentioned against each item and cost of fixing of items shall deemed to be included in the quoted rate of item No. 5

Taking down carefully centrifugal pump set 20 to 25 HP by disconnecting the pump from motor after unscrewing nuts/ bolts of coupling, foundation, inlet, delivery pipes and shifting of pump to workshop for repair/ servicing, comprising strip opening of pump, replacement of any defective parts, re-assembling and shifting from workshop to site, re-installation at location as directed by Engineer-in-Charge, testing on load, complete all as specified and as directed. (Supply of spare parts shall be measured and paid for separately under respective items here-in-after) Make of Pumps : Kirloskar, Mather Platt or any make as per site.

Supply only pump shaft sleeve made of gun metal suitable for 20 to 25 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only key for main shaft/impeller (SS 410) suitable for 20 to 25 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only check nut suitable for 20 to 25 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only stuffing box bush suitable for 20 to 25 HP motor pump as per manufacturer's design complete all as specified and as directed.

Remetaling of shaft, turning, grinding as per the required size and polishing including provision of neck rings of impellers suitable for 20 to 25 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only water seal suitable for 20 to 25 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only stuffing box packing and greasing suitable for 20 to 25 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only pump set bearing housing DE/NDE of CI grade FG 210 suitable for 20 to 25 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only ball bearing (roller/ thrust/ any other type) DE/NDE suitable for 20 to 25 HP motor pump as per manufacturer's design complete all as specified and as directed. Make: NBC/ TATA/ SKF Note: All the items/parts mentioned srl 6.01 to 6.09 here-in-before shall be suitable/ compatible for the type and make of pumping set as mentioned against each item and cost of fixing of items shall deemed to be included in the quoted rate of item No. 6

Taking down carefully centrifugal pump set 10 to 15 HP by disconnecting the pump from motor after unscrewing nuts/ bolts of coupling, foundation, inlet, delivery pipes and shifting of pump to workshop for repair/ servicing, comprising strip opening of pump, replacement of any defective parts, re-assembling and shifting from workshop to site, re-installation at location as directed by Engr-in-Charge, testing on load, complete all as specified and as directed. (Supply of spare parts shall be measured and paid for separately under respective items here-in-after) Make of Pumps : Kirloskar, Mather Platt or any make as per site.

Supply only pump shaft sleeve made of gun metal suitable for 10 to 15 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only key for main shaft/impeller (SS 410) suitable for 10 to 15 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only check nut suitable for 10 to 15 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only stuffing box bush suitable for 10 to 15 HP motor pump as per manufacturer's design complete all as specified and as directed.

Remetaling of shaft, turning, grinding as per the required size and polishing including provision of neck rings of impellers suitable for 10 to 15 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only water seal suitable for 10 to 15 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only stuffing box packing and greasing suitable for 10 to 15 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only pump set bearing housing DE/NDE of CI grade FG 210 suitable for 10 to 15 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only ball bearing (roller/ thrust/ any other type) DE/NDE suitable for 10 to 15 HP motor pump as per manufacturer's design complete all as specified and as directed. Make: NBC/ TATA/ SKF Note: All the items/parts mentioned srl 7.01 to 7.09 here-in-before shall be suitable/ compatible for the type and make of pumping set as mentioned against each item and cost of fixing of items shall deemed to be included in the quoted rate of item No. 7

Dismantling and taking up submersible motor pumpset 7.5 HP, 3 phase with connected pipes of size 80/100 mm from the tube well after dis-connecting the electric connections, shifting the same to the workshop for repair involving replacement of wornout parts, bringing back to the site after repair and lowering the motor pump set including replacement of rubber washers, nuts, bolts, washers and re-fixing electrical connections as required at site (Supply of spare parts shall be measured and paid for separately under respective items here-in-after) and testing on load, complete all as specified and as directed. Make : Kirloskar, CG or any make as per site.

Supply only SS impeller suitable for 7.5 HP submersible pump set seven stage as per manufacturer's design complete all as specified and as directed.

Supply only shaft sleeve suitable for 7.5 HP submersible pump set as per manufacturer's design complete all as specified and as directed.

Supply only neck ring suitable for 7.5 HP submersible pump set as per manufacturer's design complete all as specified and as directed.

Remetaling of shaft, turning, grinding as per the required size and polishing required as per site condition complete all as specified and as directed.

M & L for opening of submersible motor capacity 7.5 HP, 3 phase, taking out burnt winding carefully, cleaning of slots, rewinding of the same with PVC insulated copper cable of appropriate size matching with manufactures design, including replacement of all insulating materials such as glass paper, insulated sleeves, varnishing, drying up as applicable, re-assembling complete all as specified and as directed. Note: All the items/parts mentioned against item 8.01 to 8.05 here-in-before shall be suitable/ compatible for the type and make of pumping set as mentioned against item 8. Cost of fixing of item 8.01 to 8.04 shall deemed to be included in the unit rate of item 8 here-in before.

Dismantling and taking up submersible motor pumpset 15 HP, 3 phase with connected pipes of size 80/100 mm from the tube well after dis-connecting the electric connections, shifting the same to the workshop for repair involving replacement of wornout parts, bringing back to the site after repair and lowering the motor pump set including replacement of rubber washers, nuts, bolts, washers and re-fixing electrical connections as required at site (Supply of spare parts shall be measured and paid for separately under respective items here-in-after) and testing on load, complete all as specified and as directed. Make : Kirloskar, CG or any make as per site.

Supply only SS impeller suitable for 15 HP submersible pump set seven stage as per manufacturer's design complete all as specified and as directed.

Supply only shaft sleeve suitable for 15 HP submersible pump set as per manufacturer's design complete all as specified and as directed.

Supply only neck ring suitable for 15 HP submersible pump set as per manufacturer's design complete all as specified and as directed.

Remetaling of shaft, turning, grinding as per the required size and polishing required as per site condition complete all as specified and as directed.

M & L for opening of submersible motor capacity 15 HP, 3 phase, taking out burnt winding carefully, cleaning of slots, rewinding of the same with PVC insulated copper cable of appropriate size matching with manufactures design, including replacement of all insulating materials such as glass paper, insulated sleeves, varnishing, drying up as applicable, re-assembling complete all as specified and as directed. Note: All the items/parts mentioned against item 9.01 to 9.05 here-in-before shall be suitable/ compatible for the type and make of pumping set as mentioned against item 9. Cost of fixing of item 9.01 to 9.04 shall deemed to be included in the unit rate of item 9 here-in before.

M&L for servicing of hand operated crane of capacity upto 5 tonne including cleaning with wire brush, greasing of hoist, painting with approved color, replacement of hook, cleaning and greasing of rail slots, replacement of bridge drive and idler wheels, repair of pulley chain, painting of all iron parts with approved color, complete including load testing all as specified and directed

M&L for taking down defective electric motor, squirrel cage type of any make, from base plate after unscrewing nuts, bolts of foundation/ coupling, 3 phase, 415/440 volts, 50 Hz, AC of capacity 100/120 HP(approx weight 900 Kgs) shifting the same to workshop, strip opening after un-screwing nuts, bolts/ screws etc. taking out rotor from stator, cutting and taking out burnt winding carefully from the stator, cleaning of slots, rewinding of stator with super enameled copper winding wire of appropriate size matching with manufacturer's design including replacement of all insulating materials such as glass paper, leathered paper, PVC insulated copper conductor wire connection leads of appropriate size with sleeves of suitable size upto terminal connection box, varnishing, drying up, re-assembling, refxing and re-installation at site complete and testing on load complete all as specified and as directed by Engineer-in-Charge. Note: (i) Required T & P such as chain pulley block and transportation shall be contractor's responsibility and quoted rate shall deemed to inculde the same. (ii) Repair shall be done from any workshop within a radius of 20 Km from GE (U) Chandimandir. (iv) After assembling, rewinded motor shall be checked for no load current and full load current. Make : Kirloskar, CG or any make as per site.

Description all as per item No 11 here-in-before but 75 HP motor (approx weight 550 Kg).

Description all as per item No 11 here-in-before but 60 HP motor (approx weight 425 Kg).

Description all as per item No 11 here-in-before but 50 HP motor (approx weight 350 Kg)

Description all as per item No 11 here-in-before but 30 HP motor (approx weight 250 Kg)

Description all as per item No 11 here-in-before but 20 to 25 HP motor (approx weight 185 Kg)

Description all as per item No 11 here-in-before but 10 to 15 HP motor (approx weight 125 Kg)

Description all as per item No 11 here-in-before but 7.5 HP motor (approx weight 90 Kg)

Description all as per item No 11 here-in-before but 5 HP motor (approx weight 40 Kg)

Supply and fixing in repair ball bearing DE/NDE suitable for AC electric motor, 3 phase, 415/440 volts of rating 120 HP capacity complete all as specified and as directed. Make : SKF/TATA/NBC.

Description all as per item No 20 here-in-before but of rating 75 HP motor.

Description all as per item No 20 here-in-before but of rating 60 HP motor.

Description all as per item No 20 here-in-before but of rating 50 HP motor.

Description all as per item No 20 here-in-before but of rating 30 HP motor.

Description all as per item No 20 here-in-before but of rating 25 HP motor.

Description all as per item No 20 here-in-before but of rating 20 HP motor.

Description all as per item No 20 here-in-before but of rating 15 HP motor.

Description all as per item No 20 here-in-before but of rating 10 HP motor.

Description all as per item No 20 here-in-before but of rating 7.5 HP motor.

Description all as per item No 20 here-in-before but of rating 5 HP motor.

Taking out open well type 7.5 HP, 3 phase, submersible motor pumpset after dis-connecting the electric connections, shifting the same to workshop for repair, shifting back to site after repair, re-fixing at site, replacement of rubber washers, fixing of nuts, bolts, washers, refixing electrical connections complete all as specified and as directed.

M&L for Strip opening of open well type submersible motor of capacity 7.5 HP, 3 phase, taking out burnt winding carefully, cleaning of slots, rewinding with PVC insulated copper cable of appropriate size matching with manufacturer's design including replacement of all insulating materials such as glass paper, insulated sleeves, varnishing, drying up as applicable, re-assembling complete all as specified and as directed.

Taking out open well type 5 HP, 3 phase, submersible motor pumpset after dis-connecting the electric connections, shifting the same to workshop for repair, shifting back to site after repair, re-fixing at site, replacement of rubber washers, fixing of nuts, bolts, washers, refixing electrical connections complete all as specified and as directed.

M&L for Strip opening of open well type submersible motor of capacity 5 HP, 3 phase, taking out burnt winding carefully, cleaning of slots, rewinding with PVC insulated copper cable of appropriate size matching with manufacturer's design including replacement of all insulating materials such as glass paper, insulated sleeves, varnishing, drying up as applicable, re-assembling complete all as specified and as directed.

Taking out open well type 2 to 3 HP, 3 phase, submersible motor pumpset after dis-connecting the electric connections, shifting the same to workshop for repair, shifting back to site after repair, re-fixing at site, replacement of rubber washers, fixing of nuts, bolts, washers, refixing electrical connections complete all as specified and as directed.

M&L for Strip opening of open well type submersible motor of capacity 2 to 3 HP, 3 phase, taking out burnt winding carefully, cleaning of slots, rewinding with PVC insulated copper cable of appropriate size matching with manufacturer's design including replacement of all insulating materials such as glass paper, insulated sleeves, varnishing, drying up as applicable, re-assembling complete all as specified and as directed.

Taking out open well type 0.5 to 1 HP, 3 phase, submersible motor pumpset after dis-connecting the electric connections, shifting the same to workshop for repair, shifting back to site after repair, re-fixing at site, replacement of rubber washers, fixing of nuts, bolts, washers, refixing electrical connections complete all as specified and as directed.

M&L for Strip opening of open well type submersible motor of capacity 0.5 to 1 HP, 3 phase, taking out burnt winding carefully, cleaning of slots, rewinding with PVC insulated copper cable of appropriate size matching with manufacturer's design including replacement of all insulating materials such as glass paper, insulated sleeves, varnishing, drying up as applicable, re-assembling complete all as specified and as directed.

S & F in replacement, multi stranded, 4 Sqmm, 3 core, PVC insulated and sheathed flat cables, 1100 volts, with copper conductor, ISI marked, IS- 694 complete all as specified and as directed. Make: BCH/ Finolex/ Havells/ Plaza

All as per item no. 39 above but of size 6 Sqmm, 3 core

S & F in replacement, multi stranded, 10 Sqmm, 3 core, PVC insulated and sheathed, unarmored copper conductor cables, 1100 volts, with copper conductor, ISI marked, IS- 1554/IS-694 complete all as specified and as directed.

All as per item no. 41 above but of size 16 Sqmm, 3 core

All as per item no. 41 above but of size 25 Sqmm, 3 core

All as per item no. 41 above but of size 35 Sqmm, 3 core

All as per item no. 41 above but of size 50 Sqmm, 3 core

All as per item no. 41 above but of size 95 Sqmm, 3 core

Supply & fixing in replacement motor pump set 'L' type spider coupling set, size L-150 complete made out of cast iron including drilling holes and suitable size of nuts & bolts complete all as specified and directed. Make: Flex-C/Lovejoy/HIC/Fenner

All as per item no. 47 above but of size L-190

All as per item no. 47 above but of size L-225

All as per item no. 47 above but of size L-276

All as per item no. 47 above but of size L-295

M&L for periodical Servicing of motor pumps of capacity 10 to 15 HP which includes strip opening of end plates, cleaning of bearing housings with k-oil, refilling with superior quality grease, realignment of motor pump with water level complete all as specified and as directed. Note: (i) Servicing shall be done as per set periodicity of one month (for servicing the motor pump, contractor shall submit proper documentation maintain record, hours run etc in support) monthly schedule of which shall be communicated to the contractor by the Engineer-in-Charge. (ii) Record of servicing shall be entered in a log book and shall be signed by the Engineer-in-Charge. (iii) Penal charges shall be recovered as per Sch A/BOQ notes for non compliance. (iv) Each service per motor punp to be measured and paid as one unit.

All as per item no: 52 above but for motor pumps of capacity 20 to 30 HP

All as per item no: 52 above but for motor pumps of capacity 50 to 60 HP

All as per item no: 52 above but for motor pumps of capacity 75 HP

All as per item no: 52 above but for motor pumps of capacity 100 to 120 HP

Taking down carefully existing motor and pump set of capacity 10 to 20 HP from MS common base frame for replacement of deteriorated base frame and repair of PCC foundation including re-mounting of motor pump set to match with alignment of existing pipe line complete all as specified and directed by Engineer-in-Charge. Note : PCC foundation & MS common base frame shall be measured & paid seperately under respective item of BOQ.

All as per item no: 57 above but for motor pumps of capacity 30 HP

All as per item no: 57 above but for motor pumps of capacity 50 to 75 HP

All as per item no: 57 above but for motor pumps of capacity 100 to 120 HP

Demolition and removing from site old PCC and M & L for Plain cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate (mass concrete) for pump set bed including necessary form work complete all as specified and directed.

S & F in replacement rolled mild steel channel, angle or tee sections, fixed independently, without connection plate, etc Fe-290 (Gde E-165) including nuts, bolts and washers for base frame of motor pump set, drilling of holes of suitable size for bolts & painting with 2 coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engineer-in-charge

M&L earthing complete with galvanized steel plate electrode 60cmx60cmx6mm surrounded by charcoal & salt buried directly in a pit of depth not less than 1.5m below ground level with top edge of the earth plate at a depth of not less than 1.50m below ground level, connected to and including GI strip 25mmx4mm upto 7.5m length by means of bolts, nuts, check nuts & washers of galvanized iron, earth strip protected by galvanized steel pipe 40 mm bore (light grade) & connected to main control board including necessary excavation & earth work, disposal of surplus soil not exceeding 50m, in any type of soil. (The rate also includes for cost of charcoal & salt in alternate layers of 15 cm thickness, 20 mm bore GI pipe (medium grade) for watering, funnel, wiremesh, PCC chamber in cement concrete (1:3:6) type C-1, 40mm thick RCC(1:2:4) type B-1 cover & frame etc) complete all as indicated in electric plate No 3 of SSR 2009 Part I including testing complete all as specified and as directed. Note : (i) Earthing result/data sheet will be prepared by the Contractor and submitted to Engineer-in-Charge. Earth resistance shall be to the entire satisfaction of Engineer-in-Charge and contractor will make all arrangements & provisions to get the desired reduction of resistance by artificial treatment/replacement of soil etc at no extra cost to department. (ii) GI protection pipe for earth lead shall be measured & paid for separately .

Supply and fixing in replacement aluminium strip as in earth connection of plants /assets of size 25 mm x 4 mm complete all as specified and directed.

Supply and fixing in replacement GI strip as in earth connection of plants /assets of size 32 mm x 6 mm complete all as specified and directed.

Supply & fix in repair direct online starter suitable for 5 HP capacity motor in sheet steel enclosure complete all as specified and directed. Make: Siemens Model: 3TW4290-1A.74 / ABB Model: 1SYN140318R8650/ BCH Model: NAJLEN

Supply & fix in repair direct online starter suitable for 7.5 HP capacity motor in sheet steel enclosure complete all as specified and directed. Make: Siemens Model: 3TW4290-1A.77/ ABB Model: 1SYN16018R86750/ BCH Model: NAKLEN

Supply & fix in repair direct online starter suitable for 10 HP capacity motor in sheet steel enclosure complete all as specified and directed. Make: Siemens Model: 3TW4290-1A.78 / ABB Model: 1SYN180318R8610 / BCH Model: NALLEN

Lathe work for motor for making thread of any parts and size

M&L motor capacitor of capacity 20 MFD

M&L motor capacitor of capacity 25 MFD

M&L motor capacitor of capacity 36 MFD

M&L motor capacitor of capacity 45 MFD

S&F Electric insulation mat as pe IS 15652:2006, with anit skid design, 1.1 KV grade, 3mm thick, 1mtr wide, type-C, complete all as specified and as directed .

Supply and fix glow signeage boards with base frame made from angle iron and backside from ACP sheet 3mm thich with IP 68 protection LED module, good quality virgin monomerAcrylic Sheet, 3 inch rising moulding of acrylic letter with 5mm sun board channel, including complete wiring adn SMPS power supply with IP 68 protection, Each letter will be made with computer offset for having same letter style and type as approed by Engineer-in-Charge, complete all as specified and directed.

Supply and fixing in replacement Fountain light waterproof IP-68, RGB Colour, stainless steel body,10 Watt incluidng fitting complete all as specified and directed

Supply and fixing in replacement Fountain light waterproof IP-68, RGB Colour, Aluminium body,10 Watt incluidng fitting complete all as specified and directed

Supply and fixing in replacement Decoder light controller US Plus for 3CH x 2A 660W for AC 100-240 V LED lighting all as specified and directed Make DMX or equivalent as approved by E

Supply and fixing in replacement Stainless steel water flow universal straight jetting fountain nozzle of size 15mm dia complete all as specified and directed

Supply and fixing in replacement Stainless steel water flow universal straight jetting fountain nozzle of size 10mm dia complete all as specified and directed

Supply and fixing in replacement 1.5 Sqmm 4 Core PVC Sheatherd copper conductor cable incl accessories complete all as specified and directed

Supply & fixing in replacement Gate valve 15mm dia complete all as specified and directed.

Supply & fixing in replacement reducer 10x8mm complete all as specified and directed.

Supply & fixing in replacement Fountain Jet Nozzle suitable for 25 dia pipe complete all as specified and directed.

Supply & fixing of copper thimble for 10 to 35 Sqmm Cable

Supply & fixing of copper thimble for 50 to 95 Sqmm Cable

Supply & fixing in replacement DI rising sluice valve, SS spindle 150 mm bore, flanged ends PN-1.6 ISI marked as per IS-14846/2000 and CI operating wheel including gasket, nuts, bolts and washers complete all as specified and directed.

Supply & fixing in replacement DI rising sluice valve, SS spindle 200 mm bore, flanged ends PN-1.6 ISI marked as per IS-14846/2000 and CI operating wheel including gasket, nuts, bolts and washers complete all as specified and directed.

M&L welding work any type Gas welding / electric welding for any type of job complete all as specified and directed.

Demolition of brick work built in cement mortar including allquoins,archers pillers etc complete all as specified and direcated

M&L for brick work with sub class 'B' bricks, straight of curvedon plan to exceeding 6m mean radius built in 1:4 Cement mortar complete all as specified and directed

M&L for 15mm thick rendering in cement mortar 1:4 on fair faces of brick wall or concrete surface finished even and smooth without using extra cement complete all as specifed and directed

M&L MS black sheet 3mm / 2.5mm thickness used as tranch / vlave pit cover incl painting work with two coats of black bitumouns paint over a coat of red oxide primer complete all specified and directed

Shifting of existing panel board with in 10 Km distance including loading unloading, demolistion of existing foundation and make good complete all as directed.

Dismantling existing unserviceable / deteriorated motor starter panel and capacitor panel, removal from site and depositing to MES store yard. Supply, installation, testing and commissioning of indoor type floor mounting size as per manufacturer's design Polycarbonate CPRI approved OEM made Motor Starter Panel suitable for , shall be made of modular POLYCARBONATE THERMOPLASTIC ENCLOSURES which should be UV resistance in accordance with IEC 61439-1, clause 10.2.4: The panel should be anti-acid & anti corrosive. Degree of protection against mechanical load should be IK08 (5 Joule) in accordance with IEC 62262. The manufacturer of board/panel shall submit a copy of CPRI TEST REPORT IN POLYCARBONATE OF DEGREE OF INGRESS PROTECTION IP65 IN ACCORDANCE WITH IEC 60529. The gasket should be internally embedded made of polyurethane. The manufacturer of board/panel SHALL submit a copy of TYPE TEST REPORT of a board made out of Polycarbonate thermoplastic panel in accordance with IEC 60439-1. The CPRI report shall have mention of following tests performed and passed out satisfactorily: Temperature Rise, Dielectric Properties, Short circuit withstand current – Rated peak & short time withstand current and Rated Conditional Short Circuit Current, Effectiveness of Protective Circuits. The board manufacturer must submit the copy of type test reports for Polycarbonate Thermoplastic Board only. Test Reports submitted of other material of construction like MS, SS will not be applicable. Guarantee and warrantee certificates will be accepted only from original manufacturer.

The panel should passed glow wire test 960oC in accordance with 60695-2-11 flame retardant and self-extinguishing with MC 75 for base frame & angle iron 50 x 50 x 6 mm size legs , 04 nos legs 600 mm long, PCC 1:2:4 type B-1 for grouting of base,suitable for 3 phase 415 volts 50 Hz 4 wire AC supply complete all as directed with and incl the following:- (A) : (i) MCB 3 pole, 415 Volts, rating 32 Amps, 10 KA - 04 No. (ii) Line contactor, AC 3 duty, 415 Volts, 50 Hz,150 Amps-01 No. (iii) Digital soft starter suitable for 55 kW motor, 3 phase, 415 Volts, 50 Hz, min Icl 140 amps including one spare power control board of digital starter - 01 No. (iv) Independant Control supply transformer and fast acting semiconductor fuse of suitable rating for soft starter protection -01 set (v) Resin cast CT 300/5A cast resin base – 01 set of 03. (vi) Push button ON/OFF, AC 415 Volts 50 Hz - 02 Nos. (vii) LED indication lamp AC, 415 Volts , 50Hz for RYB, ON/OFF, trip - 06 Nos. (viii) Emergency push button OFF - 01 No. (ix) Terminal block suitable for 300A rating with brass contacts for INPUT/OUTPUT termination with 9 ways. (x) 3 Phase 4 wire copper bus bars of suitable length & section not less than 40 x 10mm covered with coloured heat shrinkable anti track insulation tape of make Denson/ M-seal or equivalent of finished thickness not more than 1mm and fixed on epoxy base post insulator of both dia and height not less than 40mm- 01 set. (xi) Control wiring of push buttons, indicators/ protection circuits contactors, soft starter with 1.5 Sqmm multi strand copper cable, lugs and ferrules- 01 Job as per circuit design complete all as specified and directed.

M&L in replacement Pop Up Sprinklers inreplacement 50 mm dia working pressure 1 to 3 bar complete.

M&L in replacement Rain Bird Swing Joint in replacement 50mm operating pressure 80 PSI complete.

M&L in replacement Air release Valve in replacement 50 mm dia complete.

M&L Solvent cement 500 ml complete all as specified.

M&L in replacement Online water filter as per sample

M&L in replacement Pressure gauge as per sample

M&L in replacement PVC Branch pipe 15 mm dia flexible

M&L in replacement stainless steel with brass connector round dia of pipe 54 mm dia and 15 mm threads fountain weilded in per meter for fixing of nozzle including weilding work for any connecting work requirement complete all as specified and directed.

Supply and fixing in replacement of brass nozzle adjustable type of 15 mm dia, interior thread complete all as directed.

Supply and fixing in replacement suction stainer of size 80 mm bore

Supply and fixing in replacement suction stainer of size 100 mm bore

Supply only tyre coupling complete set of suitable size (TC-13/14/15/16 or any other as per site requirement) suitable for 20/25/30/50 HP motor pump incl boring as per shaft size as per manufacturer's design complete all as specified and as directed. Make: Fenner/ Unique/ Unimac

Designing printing supplying and fixing of Complete colour water flow chart with line diagrame in lean board (6'X3') with aluminium frame of varous pump house of chandimandir cantt as direction of AGE EM. Make layout of the board sample and design of board as approved by AGE E/M.

Opening of shutter rotational gear / mechanical parts and servicing cleaning and greasing of completed movable part make the shutter smoothly function including replace of gear any size, spring any type completed all as specified and directed

Note: Quoted Contract Sum shall be arrived at after deducting the amount of Credit Schedule (refer Schedule of Credit Revised in pdf form for quantity, rate and amount etc.) for old unserviceable materials retrieved from site.

M/s Friends Engineering Works

R D Bansal