Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹31.8 LAccepted-AOC MCB Z 2 13519 ST NO 4 GREEN AVENUE BATHINDA 151001 PB | BATHINDA | BATHINDA | PUNJAB | 151001 | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹33.8 L+₹1.6 L (4.90%)Rejected-Finance | L2 | Rejected-Finance Rejected | |
| 3 | L3₹36.8 L+₹4.6 L (14.3%)Rejected-Finance | L3 | Rejected-Finance Rejected | |
| 4 | L4₹37.8 L+₹5.5 L (17.2%)Rejected-Finance | L4 | Rejected-Finance Rejected |
Tender Value
₹49.9 L
EMD Value
₹99,800
Closing Date
28 Aug 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Faridkot
GE Faridkot Military Station
Repair/replacement of kitchen cabinets,joinery,cupboards and other connected B/R works under AGE B/R (M) at Faridkot Mil Stn
2023_MES_611404_1
GE FRD-57/2023-24
Open Tender
Civil Works
Item Rate
330 days
GE Faridkot
Class D Category a i
8 documents required · 8 mandatory
₹500
GE Faridkot
₹99,800
Yes
7 Oct 2023
31 Jul 2023
30 Aug 2023
31 Jul 2023
28 Aug 2023
14 Aug 2023
Amount
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed .
S&F Non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in floors, set and jointed in neat cement slurry and pointed in coloured cement to match the coloured tiles over and including 15mm thick screed bed or bedding layer in cement mortar 1:4 for laying finishes complete all as specified and directed .
S&F Non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm on vertical surface such as skirting / dados set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade over & including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed .
S&F Glazed ceramic coloured tiles 300mmx200mmx7mm/450mmx350mmx7mm/ 350mmx250mmx 7mm thick (colour and shade as approved) as in vertical surfaces such as skirting/dados etc, set and jointed in neat cement slurry & pointed in white cement with pigment to match the colour of tiles over & including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed .
Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed .
M&L for RCC 1:2:4, type B1 (using 20mm graded crushed stone aggregates) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies and in shelves complete all as specified and directed.
M&L for use and waste of form work to soffits of suspended slab such as roof slabs, not exceeding 200mm thick, horizontal or sloping complete all as specified and directed .
M&L for TMT bars 6 to 8mm dia , cut to length, bent to shape as required, including cranking, bending and binding with & including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed .
Demolition of Brickwork or stone/boulder masonry,built in cement mortar including all quoins, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed
M&L for brick work with fly ash bricks using old size bricks, straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6 complete all as specified and directed .
All as per Srl item No. 10 here-in-before but except bricks.
Taking down chowkats or frames n.exc 1.5 sqm each with shutters (without taking of shutters from the frames) complete all as specified and directed
S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer, calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum and screw withdrawal strength of 2200 N (Face) and 1100N (edge), minimum compressive strength 58 N/ mm ² ,modules of elasticity 900 N/mm ² and resistance of spread of flame of Class A category with property of being termite/borer proof,water/moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed. Note:- Variation in profile size of frame ±5mm is allowed and contractor's quoted rate is deemed to include the same .
S&F Factory Made Solid PVC wood grain printed Moulded Door Shutter, with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick wood grain moulded prelam PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing all as specified and directed
Taking down chowkats or frames exc 1.5 sqm but n. exc 4 sqm each with shutters (without taking of shutters from the frames) complete all as specified and directed.
S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer, calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum and screw withdrawal strength of 2200 N (Face) and 1100N (edge), minimum compressive strength 58 N/ mm ² ,modules of elasticity 900 N/mm ² and resistance of spread of flame of Class A category with property of being termite/borer proof,water/moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed. Note:- Variation in profile size of frame ±5mm is allowed and contractor's quoted rate is deemed to include the same .
M&L for 35mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.
Taking down shutter of any description exc 1 sqm but n.exc 2sqm each complete all as specified and directed.
S&F 35 mm thick 2nd class hard wood, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); fitted to chowkats complete all as specified and directed.
M&L for PCC 1:3:6, type C0 (using 12.5mm graded crushed stone aggregates) as in back filling of steel frames, bed blocks for fixing of hold fasts etc including necessary formwork complete all as specified and directed .
Taking down shutter of any description exc 1 sqm but n.exc 2sqm each & refixing the shutter in same opening including easing and adjusting complete all as specified and directed.
S&F steel frames of size 125 x 50mm for doors with one or more rebates made out of precoated sheet 1.25mm thick including necessary fixing lugs, hinges, lock strike plate, etc.complete all as specified and directed.
Taking down chowkats or frames exc 1.5 sqm but n. exc 4 sqm each complete all as specified and directed
S&F pressed steel rectangular frames for built in cupboard doors, made out of mild steel sheet 1.25 mm thick with girth of frame 185mm including MS rawls plugs and fixing 100mm long butt hinges, medium weight cold rolled mild steel etc including two coats of synthetic enamel paint over a shop coat of zinc chromate primer complete all as specified and directed .
S&F pressed steel door shutters including stiffeners made out of mild steel sheet 1.25mm thick, cut to size, holes punched and welded seams including bending or turning up all around, mitered angle, one no locking arrangement as per Godrej pattern, two nos handle and applying two coats of synthetic enamel paint over a shop coat of zinc chromate primer complete all as specified and directed Note : (i) Measurement of door shutter shall be taken as exact size of cupboard opening (excluding frame and folded/ turned up portion). (ii) Stiffeners of 150mm girth and height equal to height of shutter made to shape as directed by Engr-in-charge. cost of these stiffeners shall be deemed to be included in the unit rate quoted for door shutters and no extra measurement/payment shall be made for the same.
Dismantling of unframed timber scantlings in fillets, rails, posts, rafters, purlins etc under 40 Sqcm in section, in any position complete all as specified and directed
M&L for 2nd class soft wood plain fillets ,exc 3 Sqcm and not exc 6 Sqcm sectional area,square, rectangular or triangular in section, clean swan, secured with nails or brads ,put together with glue pinned at joints complete all as specified and directed.
Dismantling boarding,any description,fixed in any position with nails complete all as specified & directed.
M&L for 18/19 mm thick Particle board, medium density, flat pressed, single layer type or three layer type with BWR type adhesive, fixed with nails to frame-work complete all as specified and directed .
S&F Factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter 19 to 20mm thick comprising of virgin polymer of K value 58-60 (suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) and 900N (edge), minimum compressive strength 50 N/ mm ² ,modules of elasticity 850 N/mm ² and resistance of spread of flame of Class A category with property of being termite/borer proof,water/moisture proof and fire retardant .WPC to be laminated with PVC coil of minium 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed countersunk stainless steel screws complete all as specified and directed.
S&F in repair 30mm width continous (piano) hinges, mild steel, bright finish or electro galvanised fixed with screws complete all as specified and directed .
S&F chromium plated decorative handle of size 150 mm fixed with screws complete all as specified and directed .
S&F Telescopic channel, ball bearing slides, black powder coated, for drawer of 500mm long as approved complete all as specified and directed.
S&F galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed .
M&L for welding in repairs n exc 2.5 cm in length in metal of thickness n. exc 6mm complete all as specified and directed .
S&F Aluminium anodised, cast type, handle 75 mm size complete all as specified and directed.
S&F Aluminium anodised barrel tower bolts, 200 mm long of extruded section complete all as specified and directed.
S&F Aluminium anodised barrel tower bolts, 125 mm long of extruded section complete all as specified and directed.
S&F aluminium alloy, anodised, sliding door bolt of length 250mm with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolt and sliding bolts of extuded sections or cast aluminium alloy and fixed complete all as specified and directed .
S&F 140 mm floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed .
S&F 100 mm long, Stainless Steel hinges with stainless steel steel screws complete all as specified and directed.
M&L for preparation of new or previously untreated wood or wooden based surfaces of any description not other wise described over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
M&L for taking down cement plaster on brick or stone walls/ceiling etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.
M&L for rendering 15 mm thick in cement mortar 1:6 on other than fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed .
M&L for rendering 10 mm thick in cement mortar 1:3 on ceiling, surface finished even and smooth without using extra cement complete all as specified and directed.
M&L for preparation of newly plastered or unplastered surfaces of wall and applying two coat of distemper oil emulsion (white/tinted) after finishing the surfaces with a coat of wall care putty by hand roller complete all as specified and directed .
M&L for preparation of old decorated surfaces of wall by brooming down and scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of distemper oil emultion (white/tinted) complete all as specified and directed
M&L for preparation of newly plastered or unplastered wall surfaces and applying three coats of white wash complete all as specified and directed .
M&L for preparation of newly plastered or unplastered ceiling surfaces and applying three coats of white wash complete all as specified and directed .
M&L for preparation of old decorated surfaces of ceiling by brooming down and scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of distemper oil emultion (white/tinted) complete all as specified and directed.
M&L for rendering 15 mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed .
M&L for preparation of newly plastered or unplastered surfaces of wall and applying two coat of cement base paint complete all as specified and directed.
Taking up or down 15mm dia GI/PVC tubing and connection including, cleaning for refixing or removal to store complete all as specified and directed .
Taking up or down 20mm dia GI/PVC tubing and connection including, cleaning for refixing or removal to store complete all as specified and directed
M&L for Steel water tubing of 15 mm bore, medium grade, galvanised with all fittings, laid in trenches/ fixed to wall etc complete all as specified and directed .
All as per item No 55 here-in-before but except tubes
M&L for Steel water tubing of 20 mm bore, medium grade, galvanised with all fittings, laid in trenches/ fixed to wall etc complete all as specified and directed .
All as per item No 57 here-in-before but except tubes
S&F in repair 15mm dia angle valve/stop valve,fancy type ,cast copper alloy, chromium plated, concealed type with long shank and cup with crutch or butterfly handle, screwed down high pressure, screwed both ends for iron pipe complete all as specified & directed .
S&F in repair 15mm dia stop valve, cast copper alloy, chromium plated, concealed type with long shank with crutch or butterfly handle, screwed down high pressure, screwed both ends for iron pipe complete all as specified & directed .
S&F in repair bib tap,long body ,chromium plated, with crutch or butter fly handle, screwed down, screwed for 15mm bore pipe & fixed complete all as specified and directed .
S&F in repair brass CP wall/sink/basin mixer,15mm bore, for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed
S&F in repair vitreous china wash down water closet pan (pedestel pattern) white in colour including connection pipe to union of flushing cistern, inlet and overflow pipes,connecting only to flushing cistern, anti-syphonage pipe with PVC flush pipe of 32mm dia including plastic seat with cover,white in colour,bottom recessed with mild steel chromium plated hinging and 'P' or 'S' trap device complete all as specified and directed.
S&F in repair 10 litres PVC,valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed.
S&F in repair vitreous china Wash hand basin, white, flat back of size 550x400mm including cutting for and pinning in ends of brackets or erecting stand including Brass chromium plated waste coupling 32mm bore, waste pipe PVC 32mm bore, complete all as specified and directed.
S&F in repair PVC connection 15 mm size of length 450 mm with PTMT nuts complete all as specified and directed.
S&F brass chromium plated shower rose 125mm size with shower arm 15mm size, 195mm long with bend of 45 degree with flange all as specified and directed.
S&F Towel rail, 450mm long of PTMT, fixed with and including chromium plated brass screws and wooden and plastic cleats ( minimum weight 170gms ) complete all as specified & directed
S&F in repair cast iron or mild steel peg set, 175mm to 250mm with hook fixed with wall complete all as specified and directed .
Dismantling CI/PVC pipe alongwith fittings of 75/100mm/110mm dia, below or above GL or laid in floors or fixed to walls, jointed in cement mortar and taking out complete all as specified and directed .
S&F 110mm bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed .
S&F 110mm bore PVC (SWR) bends of any radius complete all as specified and directed .
M & L for washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 Cement : 4 Coarse Sand) the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square meter, top layer 15mm cement Plaster 1:1/2:2 (1 Cement : 1/2 Coarse sand : 2 Stone chipping 10mm nominal size) in panels with grooves all round as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified and directed. Note : Payment for providing grooves shall be made separately)
M&L for Forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge.
M&L for 5mm thick rough cast plaster over and including 10mm thick rendering in cement mortar 1:4 on fair faces of brick or concrete surface complete all as specified and directed . Note : The rough cast mixture shall consist of crushed stone / fine gravel aggregate, coarse sand & cement in the ratio of 1:1:1 over the rendering coat.
M&L for preparation of newly rough cast plastered surfaces of wall and applying two coat of cement base paint complete all as specified and directed
M&L for complete removal of existing treatment of old decorated surfaces of wall by brooming down and scrapping down smoke soot, moulds, moss and efflorescent salts,treating oil and greasy spots and applying two coats of distemper oil emulsion (white/ tinted) complete all as specified and directed.
M&L for roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc complete all as specified and directed .
S&F Machine cut kota stone slab in flooring 20-25mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing,cutting and mirror polishing over and including 15 mm thick screed bed or bedding layer in cement mortar 1:4 complete all as specified and directed.
S&F Machine cut kota stone slab 20-25 mm thick as in skirting,steps,dado,& pillars, set and jointed in cement slurry over & including 15 mm thick rendering in cement mortar1:4 and pointed in cement mixed with pigment to match the shade of slab including rubbing, cutting and mirror type polishing complete all as specified and directed .
S&F magnetic catcher of size 100mm fixed with screws complete all as specified and directed.
S&F Aluminium anodised, cast type, handle 100 mm size complete all as specified and directed.
S&F 75mm long, Stainless Steel hinges with stainless steel steel screws complete all as specified and directed
S&F 35 mm thick 2nd class hard wood, plain, framed, panelled shutters (any number of panels) with panels of timber flat on both sides (feather edges) or of vaneered partical board medium desnsity, wood partical board with commercial face veneers fitted to chowkats complete all as specified and directed.
S&F Aluminium anodised, cast type, handle 150 mm size complete all as specified and directed.
S&F mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed .
S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperature 1.40mm and fixed with stainless steel wire staples complete all as specified and directed .
M&L for preparation of new and previously un-treated steel surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed. Note :- A Sum of Rs.43,575.00 will be deducted on account of credit for dismantling/ demolished/ taking down material. Please refer detail on srl page No. 22 (Schedule of credit) of Tender Documents.
M/S BSS AND SONS
MODERN ENTERPRISES
SHIV SHAKTI BUILDERS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .