GE(S) BTD 58 OF 2024-25 CERTAIN BR REPAIRS TO CERTAIN BLDGS INCLUDING DAY TO DAY MAINT INSIDE DEPOT AREA OF FAD UNDER AOR UNDER AGE BR II UNDER GE (SOUTH) BATHINDA AT BATHINDA MILITARY STATION (2ND CALL)

Amount

Supply and fixing Pressed steel frames of size 125 X 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, (thickness of sheet shall be 1.25mm) and making good the wall with plaster in CM 1:6 including supply and fixing of 100 mm long MS BUTT HInges medium weight and cold rolled including two coat of synthetic enamel paint over as coat of red oxide primer incl taking down old chowkhats/frame complete all as specified and directed.

Supply and fixing for pressed steel frames of size 105 X 60 mm for doors with one or more rebates including necessary fixing lugs hinges, locks strike plate etc, (thickness of sheet shall be 1.25mm) and making good the wall with plaster in CM 1:6 including supply and fixing of 100 mm long MS BUTT HInges medium weight including two coat of synthetic enamel paint over as coat of red oxide primer incl taking old chowkhats /frame complete all as specified and directed.

M & L for PCC 1:3:6 type C1 (20mm graded stone aggregates) as in filling back of pressed steel door frames/chowkats and for fixing hold fasts, etc., complete all as specified and directed.

Taking down shutters of any description exceeding 1.0 Sqm but not exceeding 2.0 Sqm each and removal from site complete all as specified and directed.

Supply and fixing 2nd class HW 35mm thick plain framed, panelled shutter (two panel) with lock rail and panel of 9mm thick B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS-1003 (Part I) kiln seasoned and chemically pressure treated including Supply and fixing 300mm long mild steel sliding door bolts with hasp and staple, plate type, stove enameled black, with bright bolts not less than 12 mm dia with and including a minimum of 6 bolts and nuts, 4 on bolt plate and 2 on staple plate and fixed and 2 no 200 mm long MS tower Bolt and 2 no of 150 mm long MS stove enamelled oval shaped handle and including two coat of synthetic enamel paint over a coat of pink primer complete incl taking down old shutter of any description all as specified and directed.

Supply and fixing 2nd class HW 35mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauge, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing glass, gauze, etc.; sizes of members of shutters as specified in SSR Part I Section 8, Clause 8.24 (a) including 2 no 200 mm long MS tower Bolt and 2 no of 150 mm long MS stove enamelled oval shaped handle and including two coat of synthetic enamel paint over a coat of pink primer and including incl taking down old shutter of any description complete all as specified and directed.

Supply and fixing MS galvanised mild wire cloth 0.56 mm nominal dia of wire and avarage width of aperture 1.18mm and fixed with tinned tacks to galvanised wire stapple complete all as specified and directed.

Supply and fixing in repairs Mild steel galvanised wire cloth 0.56mm nominal dia of wire and 1.18 mm average width of aperture fixed with tinned tacks or galvanised wire staple, complete all as specified and directed.

Supply and fixing 3.0mm thick sheet glass ordinary quality and glazing with oil putty in squares not exc 0.50 Sqm in each pane incl hacking out old broken glass complete all as specified and directed.

M&L for preparation old previously treated surface of steel and iron work any description over 10 cm width or girth and applying two coat of synthetic enamal paint on old steel surfaces of watch tower of appx 11.50 m height (watch tower made of angle/flat iron), complete all as specified and directed.

S&F 3mm thick Linoleum, plain coloured, liad in floors including sealed down with an approved adhesive as per manufacturers instructions in floors including stretching, cutting and fitting includingRendering 15mm thick on fair faces of concrete surfaces (floor) in CM 1:4 to prepare surface of floor even and smooth and removal of existing linolium flooring of any description including roughening suracs of old conc. floor by picking, sweeping clean and washing down with water to remove dust. complete all as specified and directed.

S&F 30 mm thick hardwood 2nd class Planed one side, with butt joints and fixed with nails or nut and bolt in stages/plateforms to watch tower of height 11.50 m including dismentalling of old wooden plank any type and thickness complete all as specified.

Taking down cement or cement lime plaster of any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specied and directed.

Material and labour for 15mm thick rendering in CM (1:4) on fair faces of brick work or concrete surfaces and finishing even & smooth but without using extra cement & with using integral water proofing compound complete all as specified and directed.

Supply only of Liquid water proofing compound of approved make complete all as specified and directed.

Material and labour for rendering 15 mm thick in cement mortar in (1:6) on other then fair faces of brick work or concrete surfaces and finishing the surface even & smooth without using extra cement complete all as specified and directed.

Material and labour for Dubbing out average 10mm thick on irregular surface of Ceiling in cement mortar in (1:3) finishing the surface even & smooth without using extra cement complete all as specified and directed.

M & L for preparation of new plastered surafaces of walls and applying two coats of acrylic distemper over a coat of primer complete all as per manufacturer instructions and all as specified and directred.

Material and labour for applying three coats of white wash on newly plastered or unplastered ceiling surfaces including preperation of surfaces, complete all as specified and directed.

Material and labour three coats of white wash on newly plastered surface of wall including preparation the surface of on walls complete all as specified and directed.

Material and labour for applying two coats of cement base paint over a coat of primer on newly plastered wall surfaces including cornices & pillasters etc as per manufacturer's specifications & instructions including preparation of surface, complete all as specified and directed.

M&L brick work with sub class 'B' old size bricks straight or curved on plan exc 6 m mean radius built in CM 1:6 including demolition of any type of brickwork complete all as specified and directed.

Supply and fixing powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed .

Supply and fixing powder coated Anodised aluminium door shutters,aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, rubber neoprene packing,handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed .

Door closer hydraulically regulated, designation No. 1 universal type, suitable for door shutters up to 700 mm in width and of weight not more than 35 kg and fixed complete all as specified and directed .

S&F 100mm size moritice lock of brass, vertival type, 4 levers, complete all as directed.

S&F 12 mm prelaminated particle board, interior grade, prelaminated both sides with decorative choice laminations complete all as specified and directed by Engineer-in-Charge

S & F 595x595mmx6mm thick Gypsum board laminated with PVC Sheet as in false ceiling including supply and fixing 'Tee" grid frame work made of GI sheet 0.30mm thick, bottom portion painted with cellular nitro painting, consisting angle cleats of size 25mm wide 1.6mm thick with flag fixed to RCC ceiling with dash fastener or wraping the suspending wire around the existing wooden/steel purlin/rafter for suslpending grid frame work of size 600mmx600mm suspended with 02 Nos, 1.60mm dia GI wire @ 600mm C/C on main Tee and fixed to T-grid as per manufacturer direction. The section consisting of main Tee 37mm x24mmx0.60mm thick, cross runner tee 37mmx24mmx0.60mm and. Perimeter angle 24mmx24mmx0.50mm thick shall be fixed to wall with GI screw of 40mm long @ 450mm C/C along the perimeter of wall including or wall including all as per manufacturer's instruction incl dismentalling of old unsv false celing of any description complete all as specified and directed

S&F hollow PVC wall lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on including PVC frame including PVC beading on edges & top etc as per specifications incl dismentalling of old unsv wall panelling of any description complete all as specified and directed.

Taking down old unserviceable rolling shutter of any size upto 36 Sqm area incl hood cover complete with all accessories and making good disturbed surfaces with CM 1:4 complete all as specified.

S&F Steel rolling shutter without ball bearing as specified including top cover and 1 mm thick lath anchoring rod hasp and staple and gear operated type with bevel gear box and crank handle and one shop coat of primer erected in position as indicated complete gear operated type with bevel gear box and crank handle and including two coat of synthetic enamel painting over o coat of red oxide primer complete all as specified and as directed..

Supply only saftey lever locks of size 150mm mild steel with 4 levers with two keys for rolling shutters approved/best quality complete all as specified and directed

Supply only ball bearing for rolling shutter to match the existing complete all as specified and directed .

Taking down rolling shutter of size not exceeding 10 Sqm each from any position, any location including fittings and fixtures. Repairing / Replacing of unserviceable components and re-fixing on same opening in its original positing after complete overhauling, greasing and oiling for smooth function and apply one coat of synthetic enamel paint complete all as specified and directed. Note: - Unserviceable/ parts under this item shall be measured & paid as supply only separately under appropriate items of this BOQ.

Supply only steel helical wire or flat spiral spring for rolling shutters to pull out the shutters including proper greasing for smooth movements/ function complete all as specified and directed .

Supply only MS pulley / wheel made with flat iron 25 x 6 mm of 160mm dia for revolving of rolling shutter in shaft complete all as specified and directed .

M & L for greasing and oiling for rolling shutter and Mild Steel Side Hung Shutter of any type and size to free moving / opening and Repair Parts of Gate By Welding and Screws Bolts Including replacing of Worn Out Part of Gate With New Part of Same Specification and Painting to the Gate complete all as specified and directed.

Supply and fixing in repair roller as per sample kept with Engineer-in-charge suitable for sliding gate (Hangar Gate), 04 Nos at top of size 100mm dia and 30mm wide and 04 Nos at bottom of sise 150mm dia and 50mm wide including minor repair of gate and material for fixing the roller, complete all as specified and directed by Engineer-in- Charge.Note : T&P and material required for making good the gate deemed to be included in quoted rate , nothing extra shall be paid on this account

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground

Excavation in post holes in soft/ loose soil each n exc 0.5 cum , getting out , returning filling in and ramming earth or broken rubble mixed with around earth in layers n exc 25 cm thick , watering and removing surplus spoil to a distance n exc 50m and making good surface complete all as specified

M&L for PCC 1:3:6 type C2 using 40mm graded crushed stone aggregate as in foundation of posts and struts complete all as specified.

Mild steel work angle iron fencing posts and flat iron including embedding in concrete and screwing etc posts and struts incl cutting tops to shape as directed bent to shape, drilling holes notching for wire etc flat iron fillets (fro securing wire mess etc) including all necessary drilling bolting or riveting etc of Fe 290 Gde E-185 complete all as specified.

Dismentalling Mild Steel work of any description all as specified and directed

M&L for Rolled mild steel as in roof trusses (framed), trusses, purlins, crane gantries, rails and fastenings & heavy bracket frame (beam, tee, angle channel or flat section) in distance pieces, cleats etc confirming to Fe-410-W(grade-250, quality"A') including one shop coat of zinc chromate primer paint before fixing in position.

Labour & Fabrication and re fixing for Rolled mild steel as in roof trusses (framed), trusses, purlins, crane gantries, rails and fastenings & heavy bracket frame (beam, tee, angle channel or flat section) in distance pieces, cleats etc confirming to Fe-410-W(grade-250, quality"A') including one coat of Synthetic enamel Paint including dismentalling before fixing in position.

S&F Pre painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws incl dismentalling of old sheets of any description complete all as specified and directed.

Supply and fixing Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of having tensile strength of 550 Mpa as in ridge /hip vally gutter fixed with self tapping screws incl dismentalling of old sheets of any description complete all as specified and as directed by Engineer-in-charge.

S&F in repair three track aluminium anodised sliding window with three sliding shutter, the size of outer frame three track 95 x37x1.5 mm (using two track for glazed window shutter and one track for wire gauged, the section shutter size 37x18x1.2mm) and glazing with 5mm thick transparency glass of polycarbone including all round suitable rubber gasket and stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.4mm and fixed on aluminum flat and inserted in the frame of shutter with tracking arrangement each sliding window shall be provided with one number handle including locking arrangement & 2 numbers sliding rollers of nylon with all necessary fittings including making good the disturbed surface with cement plaster 1:6 and matching the colour of new plaster with existing surface complete all as specified and directed. complete all as specified and directed .

Supply and fixing powder coated Anodised aluminium window side hung shutter,aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, rubber neoprene packing,handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed .

BALAJI CONSTRUCTIONS (BID ID -3195237)

M/s Kamal Builders (BID ID -3200730)

FATEH ENTERPRISES (BID ID -3201010)