Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹44.5 LAccepted-AOC | L1 | Accepted-AOC Being Lowest | |
| 2 | L2₹51.6 L+₹5.9 L (12.9%)Rejected-Finance | L2 | Rejected-Finance Being other than lowest | |
| 3 | Rejected-Technical 1202 SAI PROVISO DHNISHT PLOT NO 72 73 SECTOR 20 KOPARKHAIRANE NAVI MUMBAI | THANE | MAHARASHTRA | 400601 | - | Rejected-Technical Rejected Not enlisted in Cat c vii |
Tender Value
Refer Docs
EMD Value
₹89,400
Closing Date
11 Aug 2022, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (NW) Navy Nagar, Colaba, Mumbai
GE NW NAVY NAGAR COLABA MUMBAI DR HOMI BHABHA ROAD NAVY NAGAR COLABA MUMBAI
REPAIR REPLACEMENT OF SUCTION DISCHARGE LINES DOSING UNITS AND OTHER CONNECTED WORKS AT MPH RS AREA PUMP HOUSES UNDER GE NW NAVY NAGAR COLABA MUMBAI
2022_MES_538456_1
8233/E8
Open Tender
Civil Works - Water Works
Item Rate
270 days
GE (NW) Navy Nagar, Colaba
Class D and Category a(ii)
and c(vii)
8 documents required · 8 mandatory
₹500
GE NW NAVY NAGAR COLABA MUMBAI
₹89,400
Yes
2 Sept 2022
15 Jul 2022
12 Aug 2022
15 Jul 2022
11 Aug 2022
29 Jul 2022
15 Jul 2022 - 4 Aug 2022
Amount
Supply and fix in repair cast iron foot valve threaded type or flanged type in existing location or new position or location in the sump of any capacity including Nut, bolt, washer, rubber gasket welding work, making good of distrub surfacemaking of flanged joints and repair making good to existing PCC surface of following sizes :-
300 mm bore
250 mm bore
100 mm bore
150 mm bore
80 mm bore
Supply and fix in repair of Cast Iron Non return valve (PN 16) both ends flanged including Nut, bolt, washer, rubber gasket welding work, making good of distrub surface all as specified and directed by Engineer-in-Charge of the following sizes :-
300 mm dia
250 mm dia
200 mm dia
150 mm dia
S&F in repair sluice valves flanged end, cast iron body, flanged and drilled and non rising type brass spindle with nut, long body, class P N 1.6, confirming to IS 14846 of 2000 for following sizes including all flange joint with rubber or fiber board, bolts, nuts and washers welding works complete including pumping out accumulated water all as specified and directed of following size.
(a) 300 mm bore
(b) 250 mm bore
(c) 200 mm bore
(d) 150 mm bore
(e) 100 mm bore
Supply, Installation Testing & Commissioning in repair of Motor Actuated Butterfly Valve consisiting of Quarter turn single phase Actuator and Wafer type butterfly valve of size 150 mm dia with appropriate bracket/mounting arrangement including two nos. limit switches for open and closed condition and splash proof enclosure. Specifications & Features Input Voltage: 230 V, A.C. Designed line pressure: 10 kg/sq cm. Operating Angle: 90 degrees Disc Material: CI with nylon coating Limit Switches : 02 Nos.For open and close status Mounting : Direct/indirect on valve Make : EMTORK/HASEL HOFENER/ RITE TORK/ SIEMENS/ HONEY WELL
Supply, Installation Testing & Commissioning in repair of Motor Actuated Butterfly Valve consisiting of Quarter turn single phase Actuator and Wafer type butterfly valve of size 250 mm dia with appropriate bracket/mounting arrangement including two nos. limit switches for open and closed condition and splash proof enclosure. Specifications & Features Input Voltage: 230 V, A.C. Designed line pressure: 10 kg/sq cm. Operating Angle: 90 degrees Disc Material: CI with nylon coating Limit Switches : 02 Nos.For open and close status Mounting : Direct/indirect on valve Make : EMTORK/HASEL HOFENER/ RITE TORK/ SIEMENS/ HONEY WELL
Supply, Installation Testing & Commissioning in repair of Motor Actuated Butterfly Valve consisiting of Quarter turn single phase Actuator and Wafer type butterfly valve of size 300 mm dia with appropriate bracket/mounting arrangement including two nos. limit switches for open and closed condition and splash proof enclosure. Specifications & Features Input Voltage: 230 V, A.C. Designed line pressure: 10 kg/sq cm. Operating Angle: 90 degrees Disc Material: CI with nylon coating Limit Switches : 02 Nos.For open and close status Mounting : Direct/indirect on valve Make : EMTORK/HASEL HOFENER/ RITE TORK/ SIEMENS/ HONEY WELL
Supply, Installation Testing & Commissioning in repair of Motor Actuated Butterfly Valve consisiting of Quarter turn single phase Actuator and Wafer type butterfly valve of size 100 mm dia with appropriate bracket/mounting arrangement including two nos. limit switches for open and closed condition and splash proof enclosure. Specifications & Features Input Voltage: 230 V, A.C. Designed line pressure: 10 kg/sq cm. Operating Angle: 90 degrees Disc Material: CI with nylon coating Limit Switches : 02 Nos.For open and close status Mounting : Direct/indirect on valve Make : EMTORK/HASEL HOFENER/ RITE TORK/ SIEMENS/ HONEY WELL
Supply, Installation Testing & Commissioning in repair of Motor Actuated Butterfly Valve consisiting of Quarter turn single phase Actuator and Wafer type butterfly valve of size 80 mm dia with appropriate bracket/mounting arrangement including two nos. limit switches for open and closed condition and splash proof enclosure. Specifications & Features Input Voltage: 230 V, A.C. Designed line pressure: 10 kg/sq cm. Operating Angle: 90 degrees Disc Material: CI with nylon coating Limit Switches : 02 Nos.For open and close status Mounting : Direct/indirect on valve Make : EMTORK/HASEL HOFENER/ RITE TORK/ SIEMENS/ HONEY WELL
Taking down/Removing in old plasters, broken bricks, PCC , MS Chanel, MS Plate & debries inside the valve chamber in repair/maintenance of existing brick masonry valve chamber of size 1.2 x 1.2 x 1.2m (internal dimension) (above GL 0.30 mtr) , 15cm thick foundation using PCC 1:4:8 type D-2 over 15cm thick hardcore of broken stone, 23cm thick brick walls built in cement and sand mortar 1:4, 15mm thick internal and external plaster including top of floor in cement and sand mortar 1:3, 15mm thick, finished even and smooth, without using extra cement, 5 mm thick plate cover over complete chamber on 50mm x 50mm x 6mm MS angle frame embeded in PCC 1:2:4 type B-1coping, having rectangular, hinged, opening of size 150 x 100mm with locking arrangements ,hold fasts, etc, applying one coat of red oxide primer and two coats of synthetic enamel paint to all steel surfaces and earth work in any type of soil including disposal of debris outside MD land complete all as specified. Note :- Rates for removing of old plasters, broken stones/bricks, PCC of any type, earth work, M S Chanel, MS Plate e.t.c are deemed to be included in the quoted rate.
S& F Compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, of size Fe 410-W(GdeE- 250) quality A or all as specified and directed by Engineer-in-Charge.
Supply and fix in repairs cast iron pipes with spigot and socket centrifugally cast class 'A' in any length laid in trenches of following sizes.
300mm bore
250 mm bore
200 mm bore
150 mm bore
100 mm bore
80mm bore
Supply and fix in repairs DI pipes with spigot and socket centrifugally cast class 'A' in any length laid in trenches of following sizes.
350 mm bore
300 mm bore
150mm bore
100mm bore
80mm bore
S&F in repair and replacemnt of MCCB with thermal adjustment of 0.8 to 1In and magnetic adjustable 5 t0 10 In and Ics=100% of Icu and repacing burnout copper spreaders of suitable size including nuts and bolts and fixing to existing panel control wiring including necessary alternation to existing busbar and panel all as specfied and directed by Enginner-in-charge
MCCB of 350A ,Breaking capacity 65KA,4P Make L &T /ABB/Havells/ Legrand
MCCB of 200A ,Breaking capacity 55KA,4P Make L &T/ABB/Havells/ Legrand
MCCB of 630 A ,Breaking capacity 65KA,4P Make L &T /ABB/Havells/Legrand
MCCB of 125 A,Breaking capacity 55KA,3P Make L &T/ABB/Havells/ Legrand
MCCB of 100A,Breaking capacity 38KA,3P Make - L &T/ABB/Havells/Legrand
MCB of 63A, Breaking capacity 38KA,3P Make - L &T/ABB/Havells/Legrand
MCB of 25A, Breaking capacity 38KA,3P Make - L &T/ABB/Havells/Legrand
S&F in repair AC-3 type contactor with control voltage of 230V AC with integrated auxillary or Add on block contacts with 1 or 2 No and NC including connection of control wiring to contactor and testing of starter after repairing .
Contactor rating of MNX 300A Make - L &T/Havells/Siemens/ABB
Contactor rating of MNX 225A Make - L &T/Havells/Siemens/ABB
Contactor rating of MNX 185A Make - L &T/Havells/Siemens/ABB
Contactor rating of MNX 140A Make - L &T/Havells/Siemens/ABB
Contactor rating of MNX 95 A Make - L &T/Havells/Siemens/ABB
Contactor rating of MNX 70A Make - L &T/Havells/Siemens/ABB
Contactor rating of MNX 50A Make - L &T/Havells/Siemens/ABB
Contactor rating of MNX 40A Make - L &T/Havells/Siemens/ABB
Contactor rating of MNX 32A Make - L &T/Havells/Siemens/ABB
Contactor rating of MNX 22/25A Make - L &T/Havells/Siemens/ABB
Repair/ maintenance to Chlorine dozing system assembly with chlorine injector dozing pump, cleaning, servicing, carrying out minor repairs and testing. (Note : (a) Work is including consumables like cotton waste cloth etc. (b) Parts and spares required to be replaced shall be measured and paid separately.
Supply and fixing in replacement against item No 15.00 above the following items:-
Gear motor 210-250 volt 50 Hz suitable for decrin dosing pump
Rotor assembly with bearing brackets and tolerance rings.
Coil 210-250 volt, 50 Hz
Single head feed rate control with shaft.
Pump head (Ferrules 1/4" including duckbill
Roller assembly
Pump tube
Injection check valve 3/8"
Weighted suction line strainer 3/8"
White suction/ discharge tube
M & L for CI specials confirming to IS - 1538, spigot /socket or flanged fitting I.e. bend, tee, collar, flanged/ socket /spigot, Tappers and tails pieces etc suitable for 80/100/150/200/250/300 mm bore pipes (joints and joining material shall be measured and paid seperately)
M & L for DI specials confirming to IS - 1538, spigot /socket or flanged fitting I.e. bend, tee, collar, flanged/ socket /spigot, Tappers and tails pieces etc suitable for 100/150/200/250/300/350 mm bore pipes (joints and joining material shall be measured and paid seperately)
Supply and fix in repairs MS Pipe including all fittings such that nut bolts washers welding flanges, welding works confirming to IS 1239 Part-I (2004) equivalent to BS 1387/1985 of following dia all as specified and directed by Engineer-in-Charge.
300 mm bore
200 mm bore
150 mm bore
100 mm bore
80 mm bore
250 mm bore
Excavation in trenches not exceeding 1.5 mtr wide not exceeding 1.5 mtr in depth and getting out in soft/ loose soil all as specified.
Returning filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cms in any type of soil all as specified. Note : For item No 20.00 and 21.00 above rate deemed to be included for earth work and form work required as per site requirement & as directed by Engineer-in-Charge.
Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15 cm thickness (below or above ground level) and debris out side MD land all as specified.
M&L cement concrete 1:2:4, type B-2 (using 40 mm graded stone aggregate) as in support of CI pipes, foundation and hardstanding finishing even and fair without using extra cement all as specified.
Removing excavated material exc 250m but n.exc 500m and depositing where directed all as specified.
M & L for run lead joint in repair with pig lead including pumping out / bail out water and necessary excavation and earth work in any type of soil,to repair the joints for following sizes of pipes :-
300 mm bore
250 mm bore
200 mm bore
150 mm bore
100 mm bore
80 mm bore
M & L for Cutting existing DI pipes and reducing for insertion of DI fittings to required length in position for following sizes :-
350 mm bore
300 mm bore
150 mm bore
100 mm bore
80 mm bore
M & L for Cutting existing cast iron pipes and reducing for insertion of CI fittings to required length in position for following sizes :-
300 mm bore
250 mm bore
200 mm bore
150 mm bore
100 mm bore
80 mm bore
Material and labour for rubber gasket joint of following sizes complete all as specified and directed
350 mm bore
300 mm bore
250mm bore
200 mm bore
150 mm bore
100 mm bore
Supply only Calcium Hypochlorite in granular form in 45 or 25 Kg drum, having minimum 70% of available chlorine (Ca(OCI)) with anti-corrosive and anti-scaling properties suitable for human consumption. Make: PuriChlor / Declibac(SRHSH)/Acuro OrganicsLtd/ RX Chemicals
Supply only N-diethyl-p-phenylenediiamine liquid for free chlorine test under DPD method Each bottle of 100 ml . Make -Aquasol or equivalent as approved by Engineer-in-Charge/GE.
Supply & fixing in repair dosing Pump high pressure single head gear motored adjustable dosing pump with accessories include lead tubing, connecting nuts, injection check valve, clay weight, ferules etc.
Supply and Fixing in repair dosing system consisting 40 ltr-100 ltr PE/FRP Tank with PE/FRP Lid & level gauge along with agitator with shaft & blade in plastic tank.
Supply, Installing , Testing and commissioning in repairs of Ultrasonic Level Transmitter Range : 0-5 mtrs Accuracy : 0.5 % minimum Supply voltage : 24 V DC Output : 4-20 mA Ultrasonic Frequency : 75 kHz burst, rep. rate 96 ms Delay at Power up : 1.5 seconds Temperature Effect : Uncompensated : 0.2 % of distance /degree C & Compensated : 0.02% of distance /degree C. Delay at Power up : 1.5 seconds Resolution : 1.0mm Output response Time : 100 ms to 2300 ms Minimum window size : 20mm Environmental Rating : Leakproof design is rated IEC IP67, NEMA 6P Operating Conditions : Temperature -20 degree C (-4 degree F to 158 degree F) Maximum relative humidity : 100 % Make: Endress+Hauser,Banner,Krohne Marshal/Siemens.
shubham construction
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .