Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹28.9 LAccepted-AOC OLD E 65 CWE AF SGR R O PARRAYPORA CHOWK NEAR SALFIA MUSLIM INSTITUTE SRINAGAR KASHMIR | SRINAGAR | SRINAGAR | JAMMU AND KASHMIR | 190005 | L-1 | Accepted-AOC Lowest and Reasonable | |
| 2 | L-2₹32.7 L+₹3.1 L (10.4%)Rejected-Finance | L-2 | Rejected-Finance Other than Lowest | |
| 3 | L-3₹35.0 L+₹5.4 L (18.1%)Rejected-Finance | L-3 | Rejected-Finance Other than Lowest | |
| 4 | L-4₹35.4 L+₹5.7 L (19.3%)Rejected-Finance | L-4 | Rejected-Finance Other than Lowest | |
| 5 | L-5₹35.5 L+₹5.9 L (19.9%)Rejected-Finance 0 GHULAM MOHAMMAD AND CO 0 GURUDAWARA II RAWALPORA SRINAGAR JAMMU AND KASHMIR RAWALPORA SRINAGAR JAMMU KASHMIR 190001 | SRINAGAR | JAMMU AND KASHMIR | 190001 | L-5 | Rejected-Finance Other than Lowest |
Tender Value
₹43.7 L
EMD Value
₹87,360
Closing Date
29 Apr 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Sh S K Rai GE
Garrison Engineer AF Air Force Station Srinagar 190 007
ADDITION / ALTERATION OF EXISTING FSP AT ALPHA LOOP AT AF STN SRINAGAR
2024_MES_648007_1
GE (AF)/SGR-66/2023-24
Open Tender
Civil Works
Item Rate
180 days
GE AF Srinagar
Please refer NIT and Tender Documents
9 documents required · 9 mandatory
₹500
GE (AF) Srinagar
₹87,360
Yes
29 Jun 2024
27 Mar 2024
1 May 2024
27 Mar 2024
29 Apr 2024
15 Apr 2024
Amount
B/R Portion
Excavation over areas not exceeding 1.5m depth and getting out in any type of soil, complete all as specified and directed.
Excavating in trenches, not exceeding 1.5m wide and not exceeding 1.5m depth for foundation, etc., and getting out in any type of soil, complete all as specified and directed.
Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick any type of soil, complete all as specified and directed.
Removing excavated materials (soil) to a distance not exceeding 150m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.
Demolition of cement concrete in ground floors and paving (un-reinforced) not exceeding 15cm thickness, below or above ground level, complete and removing rubbish from the site, complete all as specified and directed.
Demolition of cement concrete (re-inforced) in any description and in any position not otherwise specially provided for complete all as specified .
Demolition of brick work or stone / boulder masonry built in cement mortar including all quoins, arches, pillars etc. all as specified.
Walling of random rubble stone masonry, well bonded, bedded and solidly hearted built in cement mortar 1:6, brought up to courses, complete all as specified and directed. Note : Volume of PCC bond stone as provided in lieu of stone bond stone as per Serial Item No '07' here-in-after shall be deducted from total cumulative quantity of stone masonry.
All as per the description of Serial Item No '08' here-in-before but except stones i.e. using serviceable stones obtained from Serial Item No '07' complete, all as specified and as directed.
Plain cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in cills, lintels upto 1.5 metre clear span, steps, seismic and other similar band, plinth course, string courses, lacing courses, parapets and railing upto 60cm in height, copings, kneelers, apex stone, bed plates, kerbs etc. and in similar works including weathering, slightly rounded or chamfered angles and throating and necessary form work complete, all as specified and as directed.
Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area exceeding 400 Sqm, exceeding 50mm and not exceeding 100mm deep complete all as specified and as directed.
Plain Cement concrete type D-2, 1:4:8 (using 40mm graded crushed stone aggregate) as in foundation filling and mass concrete, complete all as specified and directed.
RCC M-25, design mix, using 20mm graded crushed stone aggregate as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete, complete all as specified and as directed.
RCC M-25, design mix, using 20mm graded crushed stone aggregate as in columns, pillars, piers, posts and struts, complete all as specified and as directed.
RCC M-25 (design mix) in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed.
Formwork to sides of concrete foundation, footings bases of columns, raft and beams, sides and soffits (if any) of foundation and plinth beams and similar work, vertical to rough finished surface of concrete, complete all as specified and as directed.
Formwork to sides of pillars, posts, struts, columns (square, circular rectangular on plan or polygonal etc. for rough finished surfaces of concrete, complete all as specified and as directed.
Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. for rough finished surfaces of concrete, complete all as specified and as directed.
TMT bars 10mm dia and over, cut to length bent to shape including binding with MS annealed wire of dia not less than 0.90 mm, complete, all as specified and as directed.
TMT bars 5mm dia and over as in stirrups, cut to length bent to shape including binding with MS annealed wire of dia not less than 0.90 mm, complete all as specified and as directed.
Rendering 15mm thick in cement mortar 1:4 on fair faces of stone masonry surface or concrete surfaces, finished even and smooth without using extra cement, complete all as specified.
Rendering 15mm thick in cement mortar 1:6 on other than fair faces of stone masonry surface or concrete surfaces, finished even and smooth without using extra cement, complete all as specified.
Dismantling framed truss not exceeding 10 metre span complete all as specified and as directed.
Dismantling Structural Steel work of any description complete all as specified and as directed.
Mild steel rolled work as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastening and heavy bracket framing (beam, tee, angle, square/rectangle sections, channel or flat section) including distance pieces, cleats etc. confirming to grade Fe 410-0 complete all as specified and directed.
Dismantling plain or corrugated steel sheeting any gauge, thickness including nanital or similar pattern from roof covering or in ridges, hips, valley gutter and similar works complete, all as specified and directed.
Pre-painted galvalume aluminium zinc coating G.I based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 MPA as in roof covering, fixed with self taping screws, complete all as specified and directed.
Pre-painted galvalume aluminium zinc coating G.I based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 MPA as in roof covering, fixed with self taping screws, complete all as specified and directed.
Surface Excavation not exceeding 30cm deep and averaging 15cm deep and getting out in any type of soil, complete all as specified and directed.
Hard core of broken stone gauge not exceeding 63mm deposited, spread and levelled in layers not exceeding 15cm thick, watered and rammed to a true surfaces, complete, all as specified and as directed.
PCC 1:4:8 type D-2 using 40 mm graded crushed stone aggregate 100mm thick as in sub base, floors, pavings finished even and fair complete all as specified.
HDPE Polythene film, 50 micron thick, laid on a coat of bitumen primer @ 0.30 to 0.50 Kgs/Sqm all as specified and directed.
Pavement Quality Concrete (PQC) work in pavement/ hard standing of flexural strength 40 Kg/Sqcm in field using 400 Kg of cement per cubic metre or as per design mix whichever is higher using non circular synthetic polyester triangular fibre @ 0.25% by weight of cement, thickness of concrete 20 cms, complete all as specified. Notes :- 1. The steel formwork required shall be provided by the Contractor. The Quoted Unit Rate shall be deemed to be inclusive of this aspect. 2. Polyester triangular fibre shall be measured and paid as 'Supply only' under respective Item of BOQ.
Add / deduct to Serial Item No 33 if extra / less quantity of cement is used per cubic metre, complete all as specified.
Supply only Polyester Triangular Fibres, complete all as specified and as directed.
Forming 12mm thick expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A’, thickness of slab 15 cms, complete all as specified and as directed.
Forming contraction (Dummy) joint 65mm deep x 10mm wide as the work proceeds in alternative bays and filled with sealing compound grade 'A' after priming with primer for grade 'A' sealing compound, complete all as specified and as directed.
Preparation new plastered surfaces of wall and applying two coats of oil bound distemper over a coat of alkali resistant primer over and including a coat of wall care putty (Birla/JK) of average thickness 2 to 3mm, complete all as specified and as directed.
Preparation new plastered surfaces of wall and applying two coats of cement base paint over a coat of primer complete all as specified and as directed.
Preparation of new steel surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint, over a coat of red oxide primer, complete all as specified and as directed.
E/M Portion
Taking out carefully copper / aluminium point wiring, (Light, fan, socket or power) complete with all fitting, fixtures such as switch socket out let, ceiling rose, holder, regulator, DB's etc. including making good the disturbed surface of wall/floors, complete all as specified and as directed.
Point wiring with multi stranded copper conductor of size 1.5Sqmm PVC insulated unsheathed Fire Retardant Low Smoke & Halogen (FR-LSH) cable in and including concealed metallic conduit 20mm dia or more as per the site requirement including its fittings and fixtures such as ties, bends, elbows and junction boxes etc. including 1.50 Sqmm copper earth wire (green colour) FR-LSH Cable as earth continuity conductor connected to main earthing and common earth terminal for one light point or fan point or bell point controlled by one No, one way switch using cable of different insulation colour for colour coding including 3mm thick laminated sheet cover, mild steel sunken box and inner and outer plate for mounting of Switches including cutting chases and making good to disturbed surfaces of wall / floor, complete all as specified and as directed.
Flame proof Switch Socket & Plug combined in LM6 cable termination box in LM6, 16 Amps, 250 Volts, 2P + earth, complete all as specified and as directed.
Flame proof LED Light Fitting 1 x 60 Watt, CMRI certified recommended for gas / vapour group of IIA & IIIB, Zone 1 & 2 and IP-65 protection with die cast aluminium housing with heat resistant toughened glass with LED tube light fixtures driver, holders, connector etc. complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size complete all as specified and directed.
Sub main wiring with two single core PVC insulated multistranded un-sheathed FRLS cable of size 2.5 Sqmm with stranded copper conductor, drawing into concealed PVC conduit / surface batten (including conduit and accessories) with continuous PVC insulated multistranded unsheathed FRLS cable earth wire of 1.5 Sqmm dia including taking out unserviceable sub main wiring, complete all as specified and directed. Note : Two runs of 4.0 Sqmm wire and one run of 2.5 Sqm and one run of PVC conduit shall be considered as one unit length.
Distribution Board, iron clad, Double Door with IP-43 1K-09 protection, 415 Volts Three Phase 50 C/s, Four Way, complete with appropriate size copper bus bar and neutral link complete with rupturing capacity 10 KA of the same make as of distribution board & including cutting chases to wall for fixing DB and making good the disturbed wall surface all as required at site or directed.
MCB SP, 6 to 32 Amps 10 KA, 'C' curve type with rupturing capacity 10 KA complete all as specified and as directed.
MCB SPN, 32 Amps 10 KA, 'C' curve type with rupturing capacity 10 KA complete all as specified and as directed.
Supply of advanced Lighting Protection device having advanced triggering time of 63 microseconds upto 79 metre radius protection level-1 complete with all accessories, all as specified and as directed.
1.0 metre GI Mast including LA Insulator with mounting accessories complete, all as specified and as directed.
Lighting Counter 6 digit as per IP-67 complete all as specified and directed.
Test Link complete all as specified and directed.
XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 volts grade cross sectional area 70 Sqmm 1 core, complete all as specified and directed.
XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 volts grade cross sectional area 16 Sqmm 4 core including taking down/up unserviceable cable and making good disturbed surfaces, complete all as specified and directed. Note : Earthwork in excavation, returning filling in and removal of surplus spoil shall be measured and paid separately under Serial Item No '02', '03' & '04' of BOQ.
Sand cushioning to under ground cable, laid in trenches 8cm thick below the cable and 15cm thick above the cable after laying and stretching the cable complete punned to 18cm, complete all as specified and directed. Note : Punned thickness of sand will be measured and paid.
Brick well burnt locally available sub-class 'B' laid over sand cushioning for mechanical cable protection in trenches with width of brick equal to the length of cable, complete all as specified and as directed.
Galvanized iron tubing, light grade, 40mm bore for protection of cable with all fittings fixed to walls and ceilings or laid in floors/road crossing, complete all as specified and directed.
Supply, installation, Commissioning & Testing of Bus Bar Box Panel, Outdoor type, factory made weather and vermin proof of size not less than 15" x 12" x 4" made out of 3.15mm CRCA sheet powder coated with 4 Nos 0.6 metre copper bus bar of size 20 x 5mm, 100 Amps for 1100 Volts post insulator 08 Nos duly drilled for LT cable connection including front and rear side openable with locking arrangement suitable for 1100 Volts LT and provision for incoming and outgoing LT cable connection complete all as specified and as directed.
Material and labour for renewal of Chemical earthing complete with copper earth plate electrode 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less than 4.75 m deep below normal ground level) with top edge of the plate not less than 4.00 m deep surrounded from all sides atleast 15 cm with packed layer of charcoal dust and common salt in alternate layers of 15 cm and one top layer of 50 cm with magnesium sulphate after charcoal and common salt layer and electrode connections with copper earth strip of size 32 x 6 mm by means of brazing, bolts nuts check nuts and washer and protected by light grade pipe of 50 mm bore and connected to main switch board / control board and GI watering pipe, light grade 50 mm bore including funnel and wire mesh, PCC Pit cover and PCC chamber Pit in PCC 1:2:4 type B-1 and RCC 1:2:4, type B-1 including
earth work complete all as specified and directed. Copper strip of size 32 x 6mm is included up to 7.50 metre length complete all as specified and as directed. Note :- The chemical, salt and charcoal quantity should be :- (a) Charcoal- 250 kg (b) Salt crystal- 200 Kg (c) Magnesium sulphate crystal-100 Kg
MEGA CONCRETE CONSTRUCTION ENGINEERS AND CONTRACTORS
M/S A.R TANTRAY
M/S FAROOQ AND SONS
M/S GHULAM MOHAMMAD AND CO.
M/S GHULAM HASSAN AND SONS
M/S LUCKY BUILDERS
RASHID CONSTRUCTIONS
M/S ABDUL REHMAN WANI
M/S KHAN ENTERPRISES
Bidder Name
RASHID CONSTRUCTIONS
M/S FAROOQ AND SONS
M/S LUCKY BUILDERS
M/S GHULAM HASSAN AND SONS
M/S GHULAM MOHAMMAD AND CO.
M/S ABDUL REHMAN WANI
M/S KHAN ENTERPRISES
MEGA CONCRETE CONSTRUCTION ENGINEERS AND CONTRACTORS
M/S SA INFRATECH
M/S A.R TANTRAY
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .