Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Accepted-Technical | Accepted-Technical ACCEPTED IN THE TECHANICAL QUALIFIED BY THE COMMITTEE |
Tender Value
₹15 L
EMD Value
₹30,000
Closing Date
3 Aug 2026, 6:00 pmClosed
COMMISSIONER MUNICIPAL COUNCIL CHITTORGARH
MUNICIPAL COUNCIL CHITTORGARH
NIT NO. 12 S.NO. 01
2026_DLB_579923_1
NIRMAN/2026-27/4310-13 DATED 24.07.2026
Open Tender
Civil Works
Percentage
180 days
CHITTORGARH
2 documents required · 2 mandatory
₹500
500 COMM. MC CHITTORGARH 500 MD RISL JAIPUR
₹30,000
Yes
16 Aug 2026
30 Jul 2026
4 Aug 2026
30 Jul 2026
3 Aug 2026
30 Jul 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. All kinds of soils | 34.59 | P.Cum | 178 | ₹6,157.02 |
| 2 | PCC in foundation : Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size). | 7.88 | P.Cum | 3,302 | ₹26,019.76 |
| 3 | Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. ('Original producers' who manufacture billet directly from iron ores and roll the bilets to produce steel conforming to IS:1786) Thermo-mechanically Treated bars (Conforming of relevent IS code) | 696.02 | P.Kg | 77 | ₹53,593.54 |
| 4 | Providing and laying in position specified grade of cement concrete for all RCC structural elements upto plinth level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement. M20 grade Nominal Mix / Design Mix | 10.5 | P.Cum | 4,934 | ₹51,807 |
| 5 | Random Rubble stone masonry for with hard stone in foundation and plinth in Cement Sand mortar above 30 CM thick wall in: Cement Mortar 1:6 ( 1-Cement : 6-Sand). | 25.03 | P.Cum | 2,838 | ₹71,035.14 |
| 6 | Filling available excavated earth (excluding rock) in trenches, plinth side of foundation etc. in layers not exceeding 20 cm. in depth, consolidating each deposited layer by ramming and watering including lead up to 50 meter and with all lift. Supply & Stacking good soil of earth at site complete including loading unloading & Transportation etc. Good soil of earth | 92.25 | P.Cum | 304 | ₹28,044 |
| 7 | Providing and fixing steel gate, grating , and grills made of angles, tees, square bars, flats,or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide 12 mm Thick ( 450x450x12mm) Bolt | 340.8 | P.Kg | 96 | ₹32,716.8 |
| 8 | Steel work in built up tubular trusses including cutting, hoisting ( height upto 10 m)fixing in position and applying a priming coat of approved steel primer, welded and bolted including special shaped washers etc. complete. Hot finished seamless type tubes. H Beam MB 300 | 6,289.17 | P.Kg | 109 | ₹6,85,519.53 |
| 9 | Supply and installation of Multi Rib Proofing/cladding Sheet Manufacture out of 0.50mm TCT (Total Coated Thickness) high tensile Zinc aluminum alloy coated galvalume steel (as per 150gsm zinc aluminum coated 550Mpa tuekd strength) confirming to IS: 1397/astm A-792 sheet to have wide pens 30mm high NB at 250 centre and centre width of 1020mm sheets be casted with regular modified polyster system on a continuous with line on centre for face and with a polyster coating respectively sheet shall have proportionality with siphoned plate made to prevent leakage sheet shall be fixed by more of sell drilling lift tapping hot dip zinc coated hox head fasterner of size 12x14x55mm long. The sheet shall be supplied in cost one length and for a minimum up to 12mts with all scaffolding. Add extra for 0.60mm TCT (Total Coated Thickness) high tensile Zinc aluminum alloy coated galvalume steel sheet in place of 0.50mm thick (15%) | 275.5 | P.Sqm | 792.35 | ₹2,18,292.43 |
| 10 | Stone Kharanja: Random rubble dry stone kharanja under floor | 48.54 | P.Cum | 932 | ₹45,239.28 |
stage.html
html • 0.02 MB
tech_bid_open.pdf
tech_eval
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.93 MB
TERMSANDCONDITION.pdf
Tender Documents • 3.82 MB
BOQ_1030486.xls
BOQ • 0.28 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .