Construction of Escape regulator at RD. 148900/R of Sirhind Feeder Outfalling in Langiana Drain at RD 19818

Providing & fixing in position of flat/wedge seal including preparation of surface complete in all respects and to entire satisfaction of Engineer in charge.(75 mm dia x 10 mm th.)

Providing and Fixing Skin Plate 10mm

Providing and fixing horizontal & vertical Beams

Providing and Fixing MS Plates as per details in the drawing

Providing and Fixing ISPL as per details in the drawing

Providing & fixing clamp plate for seals complete in all respects.

Providing and Fixing bottom & side seal square Bar support

Providing and Fixing SHS

Providing and fixing horizontal & vertical stiffner on Gates

Providing and fixing Anchor Plates

Providing and fixing stiffener Angle on Gates

Providing and Fixing CHAQUERED PLATE as per details in the drawing

Providing and Fixing SIDE SEAL BASE PLATE as per details in the drawing

Providing and Fixing STIFFENER PLATE as per details in the drawing

Providing and fixing T-Beam on Gates

Providing and Fixing nuts, bolts, screws of all sizes and length required complete in all respects.

Providing and Fixing side seal

Providing and Fixing csk screw

Providing and Fixing PLATE OD

Providind and Fixing Anchor 16 mm

Providing & fixing grease nipple

Providing and Fixing of Gate wheel assembly complete in all respects and to entire satisfaction of Engineer in-charge. (from dia 180 to 280 dia) (Proposed dia= 200 as per drawing)

Providing and fixing GI Pipe 50 NB (outer dia 60.2, inner dia 59.6)

Drilling/Boring hole including rimming complete in all respects and to entire satisfaction of engineer in charge (0 to 10 mm Dia)

Drilling/Boring hole including rimming complete in all respects and to entire satisfaction of engineer in charge (10 to 20 mm Dia)

Commissioning and Testing of gates at site complete in all respects and to entire satisfaction of Engineers in charge.

Providing Installation and fixing in position MS hoist assembly/ drum hoist machine at site complete in all respects and to entire satisfaction of engineers in charge (for 400 mm O)(including drum cover)

Supply and installation of new steel wire rope in position including linking gate and hoist mechanism for smooth balance operation including oiling and greasing complete in all respect as per specifications 637 IS Code 2266 and in entire satisfaction of engineer in charge.

Painting of gate leaf with primer coat and two coats with Anti corrosive Bitumastic paint to give an even shade with special quality paint.

Painting two coats with ready mix synthetic enamel paints over one coat metal primer

Providing and Fixing of Galvanized nut and bolts of all size and length required.

Providing gun metal bush assembly

Supply of multi purpose synthetic Hetiv grease

Supply of multi grade mobile oil

Providing and fixing Pulley for steel wire complete in all respect

Fixing and Holding the gate with the help of 35 tonne capacity crane.

Excavation in soil (any type) using Hydraulic Excavator CK 90 hydraulic excavator of 0.9 cum bucket capacity including cutting and leading in tippers, trimming bottom and side slopes, in accordance with requirement of lines, grades and cross sections, including all lifts and combined lead up to 30 m.

Earth work in excavation in foundations, trenches etc. in all kinds of soil where pick jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm. layers with compaction including disposal of all surplus soil as directed within lead of 30 Mtrs.

Excavation in soil (any type) using Hydraulic Excavator CK 90 hydraulic excavator of 0.9 cum bucket capacity including cutting and leading in tippers, trimming bottom and side slopes, in accordance with requirement of lines, grades and cross sections, including all lifts and combined lead up to 30 m. (Rehandling of earth)

Dismantling concrete Cement concrete plain1:2:4 mix

Cement concrete 1:3:6 with stone ballast or shingle mixing by mechanical means using concrete mixer volumetric type

Cement concrete 1:4:8 with stone ballast 20mm gauge mixing by mechanical means using concrete mixer volumetric type

Reinforced Cement Concrete M-25 mechanically natch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centering and shuttering in foundation and plinth.

Reinforced cement concrete M-30 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and Plinth.

Reinforced cement concrete M-40 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth

Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering)

Centering and shuttering for faces of walls, partitions, retaining walls and the like (vertical or battering including attached pilasters buttresses etc.

Centering and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc.

Supplying, fitting and placing HYSD bar reinforcement in foundation complete as per drawing and Technical Specifications.

Supplying, fitting and placing HYSD bar reinforcement in sub structure complete as per drawing and Technical Specifications.

Supplying, fitting and placing HYSD bar reinforcement in super-structure complete as per drawing and technical specifications.

Bituminous Concrete 50mm to 65mm thickness(Grading I) Providing and laying bituminous concrete 50mm to 65mm thick with Continuous type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder VG-30 @ 5.2%, laying with a Paver Finisher Mechanical to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction complete as per technical clause 507 of MORT&H specifications

Stone Metal Hand Broken/Crushed, Crushed Bajri-40 mm nominal size

Filling stones or spalls into crates and hand packing

Drainage Spouts complete as per drawing no. SD/205 and Technical specification with 0.6 meter long GI 100 mm dia drainage GI light grade pipe (For Bridges)

Making dewatering arrangement by pumping set 4" X 4" (Tractor Driven)

Making Bore & installation of pumping set for dewatring arrangement complete in all respects.

Supply of 150 mm dia PVC pipe including carriage in all respect.

Weaving wire netting for wire crates including binding sides and partitions to make crate of 15 cm x 15 cm or 25 cm x 7.5 cm mesh.

Extra for pumping charges of Batch Mix Concrete / Ready mix conrete work (RMC)

Excavation of Soil using Hyraulic Excavator and hydraulic Tractor Trolly I/C cutting and loading in Trolly and transporting to the embankment locations with all lifts and leads. (X-Bundh)

Filling empty cement Bags with good earth & laying in position in water conditions including supply & carriage of E.C. Bags & good earth and cost of material such as string, etc complete in all respect as per drawing, design, specifications and as per instructions of Engineer in charge. (For X- Bundh )

Filling empty cement Bags with good earth & laying in position in Dry conditions including supply & carriage of E.C. Bags & good earth and cost of material such as string, etc complete in all respect as per drawing, design, specifications and as per instructions of Engineer in charge. (For X- Bundh)

Jungle clearance on running canals and branches, and drains with discharge more than 9 Cum/s. (iii) Heavy type

Running and Maintenance of Pumping set 8 HP/ Generator set for dewatering arrangements complete in all respects