Construction of Prefab Mid day meals Hall at Govt.Higher Secondary School, Nagrota Jammu

Amount

Earth work in excavation by manual means over areas (Exceeding 30 cm and upto 1.5 mtr in depth, 1.5 mtr in width as well as 10 sqm. on plan) including disposal of excavated earth upto 1 mtr from cutting edge, disposed earth to be levelled and neatly dressed in : All kinds of Soil

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level.1:4:8 (1 cement: 4 coarse sand: 8 graded stone aggregate 40mm nominal size) Crushed

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level.1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal size) Crushed

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centenng. shuttering, finishing and reinforcement-All work upto plinth level 1.1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size)

Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand 4 graded stone aggregate 20mm nominal size Crushed

Providing and fixiing 50mm thick solid wall concrete pannel Aerocon of everest Rapicon Panel or equivalent to be laid on GI Channel over plinth the pannels to be jointed at Tsunged and grooved complete job

Brick work with common burnt clay F.P.S.(non-modualar) bricks of class designation 75 in foundation and plinth in Cement mortar 1 :6 (1 cement : 6 coarse sand)

12mm Cement plaster of mix 1 : 4 (1 cement : 4 coarse sand)

Centring and shuttermg including strutting, propping etc and removal of form for·

Foundations: footings, bases of columns etc. for mass concrete.

Columns, Pillars, Piers, Abutments, Posts and Struts

Steel work in built up tubular round, square or rectangular including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer including welding and bolting with special shaped washers etc.complete.Electric resistance or induction butt welded tubes

Structural steel work welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Providing and fixing Cement particle board 8mm thick complete

Providing and fixing 35 mm thick wire gauze shutters using galvanised M.S. wire gauze of average width for aperture 1.4 mm in both directoin with wire of dia. 0.63 mm for doors, windows and clerestory windows with hinges and necessary screws Second class deodar wood

Providing and fixing glazed shutters for doors, window and clerestory windows using 10kg/sqm (4mm thick) float glass panes including lSI marked M.S. pressed butt hinges bright finished of 35mm required size with necessary screws.Second class deodar wood

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including lSI marked M.S. pressed Butt hinges bright finished of 35mm required size with necessary screws excluding panelling which will be paid for separately,all complete as per direction of engineer- in charge.Second class deodar wood

Supplying and fixing of 12mm thick water proof ply for doors.

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineerin- Charge)0.50mm+/- 5% total coated thickness (TCT), Zinc coating 120gsm as per IS: 277 in 240 mpa steel grade5-7 microns epoxy primer on both sides of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5 x 55mm) with EPDM seal or with polymer coated J or L hooks,bolts and nuts 8mm diameter with bitumen and G.l. limpetwashers or with G.l. limpet washers filled with white lead complete upto any pitch in horizontal /vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+/- 5 %) total coated thickness(TCT), Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws or with polymer coated Jor L hooks, bolts and nuts and GI:Seam bolts, and nuts,GI plain and bitumen washers complete:Ridges plain (500- 600mm)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work

Providng & fixing false ceiling of Gupsum tile 595x595mm suspended with G.I Grid including cutting for fixing of electrical fittings etc complete job.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. Layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering lead upto 50m and lift upto 1.5m.

Supply, filling of RBM in layer including compaction, consolidation

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level.1:4:8 (1 cement: 4 coarse sand: 8 graded stone aggregate 40mm nominal size) Crushed

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to lS: 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. completeSize of tile 60x60cm

Wiring for light point/fan point/exhaust fan point/call bell point with 1.5 Sqmm FR PVC Insulated Copper Conductor single core cable in surface/recessed medium class PVC Conduit, with piano type switch phenolic laminated sheet, suitable size M.S box and earthing the point with 1.5 Sqmm FR PVC inulated copper conductor single core cable etc as required Shalimar, Bajaj,anchor, havells, C&S Makes

Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required. bajaj,anchor,havells,c&s Makes

Supplying and fixing PVC batten/ angle holder including connections etc. as required. bajaj,anchor,havells,c&s Makes

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.bajaj,anchor,havells,c&s, siemens, L&T Makes Single pole and neutral

Supply and fixing of 12 watt LED BULBS philips/CG/Syska/Orient/Bajaj

Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required. Makes:- Bajaj, Anchor, Havells, C&S, Greatwhite, L&T.

5/6 amps switch

15/16 A switch

3 pin 5/6 A socket outlet

6 pin 15/16 A socket outlet

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.bajaj,anchor,havells,c&s Makes

Supplying and drawing following sizes of FR PVC insulated copper conductor, single core cable in the existing surface/recessed steel/ PVC conduit as required.Make:- Bajaj, Anchor, Havells, C&S, Great white, Polycab. 2x4sqmm

Supply & Fixing of ceiling Fan 1200 mm copper winded capacitor type in the existing fan box including connections dismantelling damages if any complete job as required.

Carriage of material from source to site of work by Mechanical Transport.

Stone aggregate 40mm nominal for 13 Kms

Stone aggregate 20mm nominal for 13 Kms

Sand for 13 kms

SHARMA ENTERPRISES

LUXMI STEEL FURNITURE AND FABRICATORS