Establishment of Museum for Preservation of Culture of Koach Rajbongshis at Bongaigaon under CIDF Scheme

Amount

Earthwork in excavation for foundation trenches of walls, retaining walls, footings of column, steps, septic tank etc. including refilling (return filling) the quantity as necessary after completion of work, breaking clods in return filling, dressing, watering and ramming etc. and removal of surplus earth with all lead and lifts as directed and specified in the following classification of soils including bailing out water where necessary as directed and specified. (A) Up to a depth of 2.00m below the existing ground level. (a) In ordinary soil

Earth/ sand filling in plinth in layers not more than 150mm thick including necessary carriage, watering, ramming etc. complete as directed and specified including payment of land compensation, forest royalty, sales tax and other duties and taxes as may be necessary. (b) With hill sand obtained by truck carriage loading and unloading, and carriage to the site of work.

Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing steps, walls, brick works etc. as directed and specified including dewatering if necessary, and curing complete (shuttering where necessary shall be measured and paid separately). (b) In prop 1cement: 4 sand :8 coarse aggregate by volume

Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing steps, walls, brick works etc. as directed and specified including dewatering if necessary, and curing complete (shuttering where necessary shall be measured and paid separately). (a) In prop 1cement: 3 sand :6 coarse aggregate by volume

Providing and laying plain/reinforced cement croncrete works cement, coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately) (I) Using Mixer Machine (A) In substructure up to plinth level Foundation, footing, columns with base tie and plinth beam, pile cap, base slab, retaining walls, walls of septic tank, inspection pit and the like and other works not less than 100mm thick up to plinth level. N) Without using admixture, plasticiser c) M25 grade concrete

Providing and laying plain/reinforced cement croncrete works cement, coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately) (I) Using Mixer Machine (A) In substructure up to plinth level Foundation, footing, columns with base tie and plinth beam, pile cap, base slab, retaining walls, walls of septic tank, inspection pit and the like and other works not less than 100mm thick up to plinth level. N) Without using admixture, plasticiser b) M20 grade concrete or Prop. 1:1.5:3

In super structure from plinth level up to 1st floor level. ii) Columns, pillars, posts, struts, suspended floor, roof, landing, shelf and support, balcony, lintel, sill band, beam, girder, bressumer, cantilever, staircase (except spiral staircase and landing ) including preparing the top surface and finishing of nosing. N) Without using admixture, plasticiser c) M25 grade concrete

In super structure from plinth level up to 1st floor level. ii) Columns, pillars, posts, struts, suspended floor, roof, landing, shelf and support, balcony, lintel, sill band, beam, girder, bressumer, cantilever, staircase (except spiral staircase and landing ) including preparing the top surface and finishing of nosing. N) Without using admixture, plasticiser b) M20 grade concrete or Prop. 1:1.5:3

Extra over item Nos. 2.2.1 (I) (B), above for each subsequent floor or part thereof above the 1st floor level.

Extra over item Nos. 2.2.1 (I) (B), above for each subsequent floor or part thereof above the 1st floor level.

Providing form work of ordinary timber planking so as to give a rough finish including centering, shuttering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in-situ reinforced concrete and plain concrete work in: Foundation, footings, bases of columns, pile cap, raft and mass concrete works etc. (b) Using 25mm thick plank

Sides of tie beams, grade beams etc. at or below ground level. (b) Using 25mm thick plank

Columns, Pillars, Posts & Strut (a) Square, Rectangular, polygonal in plan or any shape like Tee/L etc. having plane vertical face (b) Using 25mm thick plank

Columns, Pillars, Posts & Strut (b) Circular or curved in plan (Using 38mm thick plank)

Sides and Soffits of Beams, beam haunchings, cantilever girders, bressumers, lintels and horizontal ties. (a) For depth not exceeding 1.0M. (ii) Using 25mm thick plank

Flat Surfaces such as soffits of suspended floors, roofs, landings, cantelever slabs, chajjas, balconies and the like. (a) Floors etc. upto 200mm in thickness. (ii) Using 25mm thick plank

Extra for each subsequent floor or part thereof above the First Floor level as mentioned in item no. 3.1.1 & 3.1.3(b).

Staircase with sloping or stepped soffits including risers and stringers but excluding Landing. (Using 38mm thick plank)

Extra for each subsequent floor or part thereof above the First Floor level as mentioned in item no. 3.1.1 & 3.1.3(b).

Providing soling in foundation and under floor with stone/ best quality picked jhama brick, sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials and if necessary dewatering, complete.(a).Brick on flat soling.

Brick work in cement morter with 1st class brick including racking out joints and curing complete as directed. (I) In Sub-structure upto plinth level including dewatering if necessary (b) In proportion 1:4.

230mm thick brick wall in cement morter with 1st class brick including racking out joints and curing complete as directed in structure (II) In superstructure above plinth level up to 1st floor level. (b). In proportion 1:4.(1 cement:4 sand)

1st class brick nogged wall in cement mortar including racking out joints and curing complete as directed in super structure above plinth up to 1st floor level (protruding M.S rod/Tor steel of column to be embeded in cement mortar and will be measured and paid separately) (A) 112mm thick brick wall (a) In cement mortar in proportion 1:4. (1 cement:4 sand)

Ist class brick nogged wall in cement mortar including racking out joints and curing complete as directed in super structure above plinth up to 1st floor level (protruding M.S rod/Tor steel of column to be embeded in cement mortar and will be measured and paid separately) (A) 112mm thick brick wall (b) In cement mortar in proportion 1:5. (1 cement:5 sand)

Extra for brick walling for each subsequent floor or part thereof above the 1st floor level. (a) 112mm thick brick/ R.B wall

Extra for brick walling for each subsequent floor or part thereof above the 1st floor level. (a) 112mm thick brick/ R.B wall

Providing Ceramic Tiles of approved quality, size, shape and thickness not less than 8 mm on floors, skirtings, treads and risers of steps over cement mortar bed 15 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with fix-A Tile Choksey/ Sika/ Pedelite/ Rouf/ White cement slurry mixed with approved pigment to match the shade of granite slab, complete at all levels as specified and directed (coloured pigment should be in conformity with colour of slab and as approved and directed by the Department). a)Normal range Somany/ Orient/Nitco /Asian Make ii) Of size 400mmx400mm and above

Cement plaster skirting with cement mortar in prop. 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement including rounding of junctions with floor. (b) 20 mm thick

10 mm thick Cement plaster in single coat on fair side of brick/concrete walls for interior plastering up to 1st floor level including arises or rounded angles not exceeding 80mm girth and finished even and smooth including curing complete as directed. b) In cement mortar 1:4

15 mm thick Cement plaster in single coat on single or half brick wall for interior plastering up to 1st floor level including arises, internal rounded angles, not exceeding 80mm girth and finished even and smooth including curing complete as directed. A) On rough side b) In cement mortar 1:4

Extra over item no 6.2.1 to 6.2.3 for plastering on celling and soffits of stairs up to 1st floor level (instead of plastering on walls) including curing complete as directed.

Extra over item no 6.2.1to 6.2.3 for interior plastering above 1st floor level for every addl floor or part thereof including curing complete as directed. a) On Single coat plaster

Extra over item no 6.2.1 to 6.2.3 for exterior plastering over wall up to a height of 1st floor level above ground level including curing complete as directed. a) On Single coat plaster

Extra over item no 6.2.1to 6.2.3 for interior plastering above 1st floor level for every addl floor or part thereof including curing complete as directed.

Extra over item no 6.2.1 to 6.2.3 for exterior plastering over wall up to a height of 1st floor level above ground level including curing complete as directed. a) On Single coat plaster

Supplying, fitting and fixing anodised aluminium decorated grill with anodised aluminium rectangular frame of 'F' and 'H' section fitted with walls, columns or stiffeners by special type of screws as per specification by the Department for all levels. (Aluminium Alloy procured from primary aluminium producer (On submission of certificate of alloy purchaging from primary producer)

Providing, fitting and fixing anodised aluminium sliding windows and ventilators of standard sections of approved brand without horizontal glazing bars, joints mitred and welded (manufactured to relevant IS specifications) and providing and fixing handles, angle cleat, rubber gasket, roller, bolting device, locking arrangements, screws etc as required complete as specified and directed for all levels.

Providing, fitting and fixing anodised aluminuim framed glazed doors with anodised aluminium frame made of 100mm x 45mm x 2.5mm section of approved brand with door style of size 88mm x 45mm x 2.5mm, top rails 50mm x 45mm x 2mm lock rails 100mm x 45mm x 2mm and bottom rails 100mm x 45mm x 2.5mm fitted with glazing clip, special type rubber gasket complete including hydraulic floor spring, pivot, tower bolt in each leaf, aluminium door handle, lock, angles, cleat etc complete as specified and directed by the department at all levels. (i) 6mm clear glass

Providing and fixing aluminium step edging with anodised aluminium angle to stairs at all levels. (i) With angle of size 38mm x12 mm x 3mm

Providing, fitting and fixing anodised aluminium partition walls of standard sections of approved brand, joints mitred and welded (manufactured to relevant I.S. specification) and providing and fitting angle cleat, rubber gasket, bolting device screws etc. at all levels. (iii)5mm frosted glass

Providing, fitting and fixing 40mm x 48mm wood reinforced PVC chowkhats fixed to the columns / stiffeners / walls with necessary holdfast / sleeves etc. as specified and directed at all levels.

Providing, fitting and fixing 24mm/ 29mm thick polymer reinforced moulded PVC door shutters fixed to the chowkath with necessary hinges, screws, bolts etc. as specified and directed at all levels (Door fixtures and fittings to be measured and paid seperately) b) 29mm thick

White washing with lime on wall surfaces (two coats) to give an even shade including throughly brooming the surface to remove all dirt, dust,mortar drops and other foreign matter.

Providing two coats of J.K Wall Putty ( White Cement based putty for concrete/ mortar walls and ceiling both internal and external) after removing all loosely adhering material from the wall surface with the help of emery stone, putty blade or wire brush and moistening the wall with sufficient quantity of clean water as specified and directed by the department. (Total thickness of two coats is maximum 1.5mm)

Wall painting (two coats) with Plastic emulsion paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) on new surface to give an even shade after throughly brushing the surfaces free from mortar droppings and other foreign matter and sand papered smooth. (a).Plastic Emulsion Paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac)

Applying one self-priming coat of acrylic emulsion coating of Unicem "Rakshak" brand by thinning 1ltrs of paints with 1ltrs of water over freshly plastered wall surface after throughly brooming the surfaces free from mortar droppings and other foreign matter and including preparing the surface even and sand papered smooth as specified and directed by the department.

Finishing wall with two coats of acrylic emulsion exterior coatings of Unicem "Rakshak" brand of required shade by thinning 1ltr. of paint with 750ml of water to give an even shade after throughly brooming the surfaces to remove all dirt and remains of loose powdered materials as specified and directed by the department.

Supplying, fitting and fixing double leaf heavy duty iron gate, frame made from 40mm x 40mm x 6mm M.S. angle and with M.S. flat of 40mm x 6mm size as per approved design.Necessary locking arrangement for temporary closing the gate and 2nos.( minimum) strong iron hinges of M.S bars and flat of same sizes on each leaf to be embedded in C.C brick pillers as necessary including a red oxide painting to all iron works as directed and specified.(Separate payment will be made for posts).

Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete. (No extra measurement for lap, hook, chair, anchor etc. will be entertained in the measurement as they are included in the rate) (Upto 1st floor level)

Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete. (No extra measurement for lap, hook, chair, anchor etc. will be entertained in the measurement as they are included in the rate) (Upto 1st floor level)

Extra over item 18.1.1(a,b,c) for each subsequent floor or part thereof above first floor level.

Supplying, providing, mixing and laying over waterproofing layers/ coatings with concrete screed of average 30mm thick or as per drawings/ requirements in proportion 1:2:4 (1cement : 2fine aggregate : 4coarse aggregate) (by volume) with 10mm and down well graded aggregates and admixed with a normal plasticizer like Master Plast PL-1 of Choksey Chemicals /Dr. Sealkit Normal Plast (Asian Chemicals)/Rheomac 707 of BASF @ 0.3% by weight of cement and thereafter scoring the top surface of the concrete screed @ 200mm c/c as specified and directed by the Department.

Jungle clearence including uprooting of vegitation, grass, brush-wood, sapling and trees not exceeding 300mm girth and disposal of the same outside the periphery and lift upto 1500mm

Supplying and placing ferrocement septic tanks of rectangular shape in to pit with manhole cover with cleaning arrangement over single brick flat soling and 75mm 1:3:6 P.C.C. Baffle wall, inlet and outlet etc are provided at suitable points complete as directed. 50 Users

Cutting down trees where the building is to beconstructed of girth exceeding 300mm, grubb ing up roots, filling pits and levelling off ground lopping branches, trimming and removeing to distance beyond 30m and stacking serviceable materials and cleaning site etc. as directed. v).Girth exceeding 2500mm but not exceeding 3000mm

Providing precast R.C.C slab over drain ,septic tank etc. in prop. 1:2:4 reinforced with 10mm M.S. bar @ 150mm centre both ways tying with 20 gauge black annealed wire with necessary shuttering , curing etc. complete including fixing in position as directed. b) 75mm thick slab

By Mix in Place Method (Construction of granular sub-base by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density,complete as per cl. 401( Including cost of testing of materials at site and laboratory as directed by the deptt.) (ii) for grading- II Material

Providing and laying Interlocking Concrete Block Pavement (ICBP) conforming to IS:15658-2006 including all lead and lift complete as per technical specification and as directed. 80mm thick interlocking precast blocks having compressive strength of 40N/sq.mm.

Providing fitting and fixing vitreous china pedestal type water closet (European type W.C pan 400mm high ) with seat and lead ,CP brass hinges and rubber buffers , CI/MS brackets , 40 mm dia flush band with fittings including painting of fittings and brackets, required. (Flushing Cistern to be paid separately) A) Parryware make a) White (i) Universal Closet S Trap (Cat No.C0271) (Anglo Indian) (inclusive of seat cover)

Supplying, fiting and fixing PVC flushing cistern with all internal fittings with CI brackets including fitting and fixing standard size CP flush pipe, union clamps etc. compete as directed and specified (pipes will be measured separately) i) Parryware make a) White (i)Economy Single Flush (Cat No.C8090/C8055)

Providing fitting and fixing vitreous china flat back type lipped front urinal basin with standard flush pipe and CP brass spreader andbrass unions, etc. complete including painting of fittings and brackets, cutting and making good the walls & floors wherever required. (A) Parryware Make (a) White (iv) Flat Back (Cat. No.C0501/72)

Providing vitreous China wash basin with CI/MS brackets, C.P brass chain with plug,PVC waste pipe including painting of fittings and brackets, cutting and making good the walls wherever required. (Pillar cock, stop cocks, waste coupling are to be paid separately) Basin (without pedestal) (A) Parryware Make (a) White (i) Star Basin 550 x 400 (Cat. No.C0450)

Providing fitting and fixing Mirror with plastic frame of size 500x400mm complete as directed and specified.

Providing, fitting and fixing CP soap tray / soap dish complete as directed and specified. (i) Jaquar Make (a) Continental (Cat.No.ACN-1331N)

Providing, fitting and fixing CP towel rail complete as directed and specified. (a) Jaquar make (i) Continental 300mm for wash basin (Cat.No. ACN-1101N)

Supplying, fitting and fixing PVC pipes of 6 Kg/cm2 (Supreme/Prince) or other ISI approved including joining ,fitting and fixing wiyh clamps etc.as necessary complete at all levels including below G.L as directed and specified. a) In exposed surfaces or in trenches. (ii) 110mm dia.

Supplying, fitting and fixing PVC pipes of 6 Kg/cm2 (Supreme/Prince) or other ISI approved including joining ,fitting and fixing wiyh clamps etc.as necessary complete at all levels including below G.L as directed and specified. a) In exposed surfaces or in trenches. (ii) 110mm dia. (iv) 75mm dia.

Supplying, fitting and fixing PVC pipes of 6 Kg/cm2 (Supreme/Prince) or other ISI approved including joining ,fitting and fixing wiyh clamps etc.as necessary complete at all levels including below G.L as directed and specified. (b)Concealed by chiselling or breaking brick wall/C.C./R.C.C and making good to the damages. (ii) 110mm dia.

Supplying, fitting and fixing PVC pipes of 6 Kg/cm2 (Supreme/Prince) or other ISI approved including joining ,fitting and fixing wiyh clamps etc.as necessary complete at all levels including below G.L as directed and specified. (b)Concealed by chiselling or breaking brick wall/C.C./R.C.C and making good to the damages. (iv) 75mm dia.

Supplying, fitting and fixing 87.5 degree PVC bend of (Supreme/Prince) or other ISI approved including joining ,fitting and fixing etc.as necessary complete at all levels including below G.L as directed and specified. a) In exposed surfaces or in trenches. (ii) 110mm dia.

Supplying, fitting and fixing 87.5 degree PVC bend of (Supreme/Prince) or other ISI approved including joining ,fitting and fixing etc.as necessary complete at all levels including below G.L as directed and specified. a) In exposed surfaces or in trenches. (iv) 75 mm dia.

Supplying fiting and fixing PVC Plain single tee of (Supreme/ Prince) or other ISI approved including joining, fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. a) In exposed surfaces or in trenches. (ii) 110mm dia.

Supplying fiting and fixing PVC Plain single tee of (Supreme/ Prince) or other ISI approved including joining, fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. a) In exposed surfaces or in trenches (iv) 75 mm dia.

Supplying fiting and fixing PVC Plain single tee of (Supreme/ Prince) or other ISI approved including joining, fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. b) Concealed by chiselling or breaking brick wall/C.C./R.C.C and making good to the damages. (ii) 110mm dia.

Supplying fiting and fixing PVC reducing Tee of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. (ii) 110 mm x 90 mm

Supplying fiting and fixing PVC reducing Tee of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. (iii) 110 mm x 75mm

Providing fitting and fixing 450mm dia. 90mm thick C.I. Man hole cover and frame of 58 Kg. weight complete as directed and specified.

Construction of filter bed in soak pit including earth work in excavation of soil and then filling up of the trench with brick bats/Charcoal covered with earth over a layer of A.C. plain sheet above brick bat filling complete as directed. (sizes of soak pit may vary depending on the sizes and capacities of the septic tank as well as the number of users as mentioned in the table.

Construction of inspection pit inside measurement 450mm x450mm x450mm flush with 100mm diameter HCI/PVC pipes and cement concrete base in proportion 1:3:6 over flat brick soling, 12cm brick wall in cement mortar in proportion 1:4 finished with 13mm cement plaster in proportion 1:2 in side wall and floor. 450mm x450mm air tight C.I. inspection pit cover and frame complete including supplying of materials, necessary excavation of pit as directed.

Supplying fitting and fixing approved uPVC Pipes of different sizes, with all necessary 'R' brand or similar approved P.V.C. Fittings such as bend, tee, elbow, reducer, nipple, plug, long screw fitting, clamps etc. complete at all levels including below G.L. as directed and specified. (A) Exposed or in trenches SUPREME/ PRINCE/ SFMC BRAND or other equvalent approved brand (High presure pipe Sch-40) b) 40 mm dia

Supplying fitting and fixing approved uPVC Pipes of different sizes, with all necessary 'R' brand or similar approved P.V.C. Fittings such as bend, tee, elbow, reducer, nipple, plug, long screw fitting, clamps etc. complete at all levels including below G.L. as directed and specified. (A) Exposed or in trenches SUPREME/ PRINCE/ SFMC BRAND or other equvalent approved brand (High presure pipe Sch-40) f)15 mm dia

Supplying fitting and fixing approved uPVC Pipes of different sizes, with all necessary 'R' brand or similar approved P.V.C. Fittings such as bend, tee, elbow, reducer, nipple, plug, long screw fitting, clamps etc. complete at all levels including below G.L. as directed and specified. (B) Concealed by chieselling or breaking brick wall/ C.C. wall/ R.C.C. wall and making good to the damaged structure. SUPREME/ PRINCE / SFMC / FUSION BAND or other equvalent approved brand (High presure pipe Sch-40) f)15 mm dia

Supplying fitting and fixing C.P. bib cock 15mm dia of approved brand directed and specified. (G.I. & C.P pipes will be measured separately) (VI) Sona brand (i) Bib Cock ( Code.No.RG-5015)

Supplying fitting and fixing stop-cock of approved brand of size as mentioned below and directed and specified (G.I. & C.P. pipes will be measured and paid separately) I) Brass stop cock (heavy) of Sant make (i)15mm dia

Supplying and fitting fixing C.P. pillar cock of 15mm dia of approved brand as specified and directed. SONA make (b) Heavy type

Supplying fitting and fixing overhead adjustable Chrome Plated (C.P.) spray shower 15mm dia. of Sona make with wall flange as directed and specified.(pipes will be measured and paid separately) (a) Supreme shower with arm

Supplying and placing plastic cylindrical vertical claused top (PCVC) tank of Sintex / Polycon / Patton make over the stagging with manhole cover with locking and cleaning arrangement including providing pads of size as required for inlet and outlet pipes (III)1000 Ltr. Capacity (a) Sintex make

Labour for erecting and placing PCVC Tank over the stagging up to a height of 5.00m complete as directed. (b) 1000 liter capacity

Supplying fitting and fixing & Installation of 1.5 HP Centifugal pump of "Crompton Brand etc. complete including all accessories etc. as desired.

Supplying, fitting and installation of 0.50 HP minimaster motor with pump set including all vecessary accessories as directed.

Wiring to a Light/Fan/Call Bell point with 2X1.5 sq.mm. PVC Insulated single core unsheathed industrial (Multistrand) cable F.R. conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade upto 1100 V olts ( Finolex/ RR Kabel or equivalent make as approved by the Deptt) in surface/recessed conduit wiring system with 20 mm dia 2 mm thick/heavy rigid IS : 9537 Part III conduit ( Berlia/AKG/Precision/ Presto Plast/ Polycab/MW or equivalent make as approved by the Deptt.) including 6 Amps flush Type Switch/bell push ( Anchor Penta/ Gold Medal / Kolor kany.kom /Havels or equivalent make as approved by the Deptt.) GI/MS switch board (ISI marked) with Phenolic laminated sheet cover ceiling rose ( Anchor penta / Gold medal / Kolor kany.kom / Havels or equivalent make as approved by the Deptt. Etc.complete. Long point upto 10 mtr length

Wiring to a Light/Fan/Call Bell point with 2X1.5 sq.mm. PVC Insulated single core unsheathed industrial (Multistrand) cable F.R. conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade upto 1100 V olts ( Finolex/ RR Kabel or equivalent make as approved by the Deptt) in surface/recessed conduit wiring system with 20 mm dia 2 mm thick/heavy rigid IS : 9537 Part III conduit ( Berlia/AKG/Precision/ Presto Plast/ Polycab/MW or equivalent make as approved by the Deptt.) including 6 Amps flush Type Switch/bell push ( Anchor Penta/ Gold Medal / Kolor kany.kom /Havels or equivalent make as approved by the Deptt.) GI/MS switch board (ISI marked) with Phenolic laminated sheet cover ceiling rose ( Anchor penta / Gold medal / Kolor kany.kom / Havels or equivalent make as approved by the Deptt. Etc.complete. Medium point upto 6mtr length

Wiring to a 5 pin 6 A plug point with 1.5 sq.mm. PVC insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS 694:1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100V (Finolex/ RR Kabel or equivalent make as approved by the deptt.) in surface /recessed 2 mm thick/heavy rigid ISI marked IS : 9537 PART III rigid PVC conduit (( Berlia/AKG /Precision/ Presto Plast/ Polycab/MW or equivalent make as approved by the Deptt.) wiring system including 5 pin 6 A flush type plug socket and 6 A F/T switch (Anchor penta/ Gold Medal/Kolor kany.kom/Havels or equivalent make as approved by the deptt.), GI/MS switch board (ISI marked with phenolic laminated sheet cover including earth continuity with 1.5 sq.mm. cable to third point of the plug socket etc. as required complete, when placed elsewhere. Medium point up to 6 Mtr. Length

Wiring for 5/6 pin 16 A plug with 4 sq.mm. PVC insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS 694:1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100V (Finolex/ RR Kabel or equivalent make as approved by the deptt.)in surface/ recessed conduit wiring system including 5/6 pin 16 A socket outlet (Anchor penta/ Gold Medal/Kolor kany.kom/Havels or equivalent make as approved by the deptt.) and 16 A flush type switch (Anchor penta/Gold Medal/Kolor kany.kom/ Havels or equivalent make as approved by the deptt.) GI/MS switch board (ISI mark with Phenolic laminated sheet cover earth continuity with 2.5 sq. mm. cable to the third pin of the socket as required complete with 20 mm dia 2 mm thick heavy rigid ISI marked IS : 9537 Part III rigid PVC conduit (Berelia/AKG/ Precission /Presto Plast /Polycab/MW or equivalent make as approved by the Deptt.) Extra long point up to 15 meter length

Wiring for circuit wiring with PVC insulated Single core unsheated industrial (Multistrand) cable FR conforming to IS 694:1990 with flexible bright annealed electrolytic copper conductor for voltage up to 1100 V (Finolex/RR kabel or equivalent make as approved by the deptt) in surface/recessed PVC conduit (Berlia/AKG/precission/Presto Plast/Polycab /MW or equivalent make as approved by the deptt) wiring system. With 3 X 1.5 sq.mm. P.V.C. insulated cable in 20 mm. dia rigid conduit

Wiring for drawing Sub-Main Line with PVC Insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS 694:1990 with flexible bright annealed electrolytic copper conductor for voltage up to 1100 V (Finolex/RR kabel or equivalent make as approved by the deptt) in surface/ recessed PVC 20 mm dia 2 mm thick heavy ISI marked IS 9537 Part III rigid PVC conduit (Berlia/AKG/precission/Presto Plast/Polycab /MW or equivalent make as approved by the deptt) wiring system. With 4 X 4 sq.mm. + earth continuity with 2X2.5 sq.mm.cable in 25 mm dia 2 mm thick/heavy rigid PVC IS : 9593 part III conduit.

Wiring for drawing Sub-Main Line with PVC Insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS 694:1990 with flexible bright annealed electrolytic copper conductor for voltage up to 1100 V (Finolex/RR kabel or equivalent make as approved by the deptt) in surface/ recessed PVC 20 mm dia 2 mm thick heavy ISI marked IS 9537 Part III rigid PVC conduit (Berlia/AKG/precission/Presto Plast/Polycab /MW or equivalent make as approved by the deptt) wiring system. With 4 X 6 sq. mm + earth continuity with 2 X 4 sq. mm cable in 32mm. Dia. 2mm thick/ heavy rigid PVC IS: 9537 Part-III conduit

Supplying including fitting and fixing of following Metal boxes for MODEL RANGE LEGRAND(ARTEOR), ANCHOR(AVE), MK(BLENZE), SCHNEIDER(ZENSELO), CRABTREE(MURANO) in surface/recessed system complete as per direction of department 1-2 module type metal

Supplying including fitting and fixing of following Metal boxes for MODEL RANGE LEGRAND(ARTEOR), ANCHOR(AVE), MK(BLENZE), SCHNEIDER(ZENSELO), CRABTREE(MURANO) in surface/recessed system complete as per direction of department 8 module type metal

Supplying including fitting and fixing of following MODEL RANGE LEGRAND(ARTEOR), ANCHOR(AVE), MK(BLENZE), SCHNEIDER(ZENSELO), CRABTREE(MURANO) front plate of suitable colour as per direction of department 2 module

Supplying including fitting and fixing of following MODEL RANGE LEGRAND(ARTEOR), ANCHOR(AVE), MK(BLENZE), SCHNEIDER(ZENSELO), CRABTREE(MURANO) front plate of suitable colour as per direction of department 8 module

Supplying with fitting and fixing of foot lamp with box and lamp holder in 3 module recessed system MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK(WRAPAROUND/PLUS), ABB (CHEIRON), KOLORS (KREST), SCHNEIDER (VIVACE), CRABTREE including making necessary connection as per direction of department.

Fitting and fixing of brackets on the wall in GI/MS switch board (ISI marked) half conceal on wall with phenolic laminated sheet cover with all accessories such as GI/MS switch board (ISI marked) with phenolic laminated sheet cover including connection as approved by the Deptt. as required complete.

Supplying with fitting and fixing sheet steel, phosphatised, powder painted dust & vermin proof double door(IP-43) surface mounting vertical TPN MCB DB incorporated with bas- bar 125A, neutral link, earth bar and din rail etc fitted on wall with grouting nuts and bolts as required complete with making necessary connection as approved, specified and directed by the deptt. 8 way TPN (8+24) double door

Supplying with fitting and fixing sheet steel, phosphatised, powder painted dust & vermin proof double door(IP-43) surface mounting vertical TPN MCB DB incorporated with bas- bar 125A, neutral link, earth bar and din rail etc fitted on wall with grouting nuts and bolts as required complete with making necessary connection as approved, specified and directed by the deptt. 12 way TPN (8+36) double door

Supplying with fitting and fixing SPN 10KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. B series( Schneider MG, legrand, Hager, Crabtree Xpro Make)

Supply, installation & testing of copper plate earth station with 600mmX600mmX6mm heavy duty copper earth plate with necessary 40mm dia. G.I. medium duty watering pipe with G.I fittings such as socket, tee, elbow, nipple and 50mmX40mm G.I. reducing socket for funnel including locking arrangement with 300mmX300mmX6mm C.I. hinged cover plate complete with digging of earth pit, construction of brick chamber and plastering of both inner & outer surface of wall as specified and directed by the deptt.

Premium Model 1400 mm sweep (ORIENT /PSPO make)/Premium model 1400 mm sweep SS-390 Deco(havels make)

Supplying including fitting and fixing of following A.C. exhaust fan in the existing hole on the wall of following sweeps with making necessary connections as approved by the Deptt. As required complete and as directed by the department. Power Flow 225mm sweep(ORIENT make)

Supplying fitting fixing of ceiling fan regulator including connections etc complete as required

Supplying including fitting and fixing of hot dip galvanised arm bracket for installation of luminaries. Header with top cap 300 mm long pipe of thickness 3 with arrangement to fix on pole top with 3 nos of bolts. i) Armed of required length size 48.3mm out side dia x 3.25 mm thick (BAJAJ/PHILIPS/VALMONT/PARUTHI ENGR/ NEZONE make) stiffener plate from arm of the following types: Single arm bracket 2000mm for 3m to 10m poles

Supplying including installation, connection as approved by the deptt., testing and commissioning of JET PUMP SET(HORIZONTAL) complete as directed and specified by the deptt. 1 HP single phase JET pump set (Horizontal) (Crompton Greaves/Aquatic/CRI/V-Guard/Calma make) 2900 rpm with DOL starter(Crompton Greaves/Control & Switch Gear/BCH/L&T/Siemens make).

Tube light with tube (hanging type, single tube)

CFL lamp with fittings

kamalchgoyary