Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹14.6 LAccepted-AOC AT KUCHANA POST KUCHANA TAH BHADRAWATI DISTRICT CHANDRAPUR MS 442503 | CHANDRAPUR | MAHARASHTRA | 442503 | ₹14.6 L Quoted ₹12.4 L | L1 | Accepted-AOC TECHNOCOMMERCIALLY ELIGIBLE L1 BIDDER |
| 2 | Rejected-Technical | - | - | Rejected-Technical not considered for not being L1 |
| 3 | Rejected-Technical | - | - | Rejected-Technical not considered for not being L1 |
| 4 | Rejected-Technical AT PO DERA VILL TALCHER DIST ANGUL ODISHA 759103 | TALCHER | ANGUL | ODISHA | 759103 | - | - | Rejected-Technical not considered for not being L1 |
| 5 | Rejected-Technical MOONIDIH DHANBAD 828129 | DHANBAD | DHANBAD | JHARKHAND | 828129 | - | - | Rejected-Technical not considered for not being L1 |
| Sl No | Description | Qty | Unit | SAROJ KUMAR SAHOO L2 | Shailesh Kumar Singh L3 | Raghunandan Gupta L5 | RAJESH KUMAR SINGH L1 | M/S ALLIED ENGINEERING SERVICES L4 |
|---|---|---|---|---|---|---|---|---|
| 1.00 | Loading to truck for transportation of drums & unloading at pump section. | 260 | Nos | 25 ₹6,500 | 25 ₹6,500 | 29.98 ₹7,794.8 | 20 ₹5,200 Lowest | 30 ₹7,800 |
| 2.00Making of pontoon which includes (i)structural steel work riveted, bolted or welded in built up sections, trusses and framed work, (ii) Supply, handling and fitting of plastic barrel with cap, HDPE, 200-220 ltr, (iii) providing and fixing precoated galvanised iron profile sheets for covering sheds and (iv) Painting on the iron and steel frame with synthetic enamel paint of approved brand . (1) 60 drums pontoon: 3nos. (2) 40 drums pontoon: 2nos. | ||||||||
| 2.10 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | 12,426.77 | Kg | 76 ₹9,44,434.52 | 72 ₹8,94,727.44 | 92.18 ₹11,45,499.66 | 65 ₹8,07,740.05 Lowest | 90 ₹11,18,409.3 |
| 2.20 | Supply, handling and fitting of plastic barrel with cap, HDPE, 200-220 ltr (all drumssize shall be same) including cleaning , tightening of caps using red oxide paint and putting inside the toe of newly fabricated Pantoon Structure: 60 drums | 260 | Nos | 802 ₹2,08,520 | 900 ₹2,34,000 | 973.1 ₹2,53,006 | 800 ₹2,08,000 Lowest | 1,000 ₹2,60,000 |
| 2.30 | Providing and fixing precoated Galvanized iron profile sheets ( size, shape and pitch of corrugation as approved by Engineer-in charge) 0.50 mm( +0.05%) total coated thickness with zinc coating 120 grams per sqm as per IS:277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyster top coat 15-18 microns. sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 meter of as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5X55 mm) with EPDM seal, complete upto any pitch in horizontal/vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape whenever required. | 49.5 | Sqm | 562 ₹27,819 | 750 ₹37,125 | 681.81 ₹33,749.59 | 700 ₹34,650 | 500 ₹24,750 Lowest |
| 2.40 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work | 496.63 | Sqm | 70 ₹34,764.1 Lowest | 75 ₹37,247.25 | 85.23 ₹42,327.77 | 70 ₹34,764.1 Lowest | 100 ₹49,663 |
| 3.00Fabrication of 01 no of CGI Sheet Shed (8x4=32 sqm ) for Fieldswitch and stater at Bhubaneswari OCP | ||||||||
| 3.10 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | 997.2 | Kg | 76 ₹75,787.2 | 72 ₹71,798.4 | 92.18 ₹91,921.9 | 65 ₹64,818 Lowest | 90 ₹89,748 |
| 3.20 | Providing and fixing precoated Galvanized iron profile sheets ( size, shape and pitch of corrugation as approved by Engineer-in charge) 0.50 mm( +0.05%) total coated thickness with zinc coating 120 grams per sqm as per IS:277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyster top coat 15-18 microns. sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 meter of as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5X55 mm) with EPDM seal, complete upto any pitch in horizontal/vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape whenever required. | 105 | Sqm | 562 ₹59,010 | 800 ₹84,000 | 681.81 ₹71,590.05 | 700 ₹73,500 | 500 ₹52,500 Lowest |
| 4.00 | Total impact of GST plus Labour Cess [@ 1 % (BOCW Cess to be deducted from the RA bill as per the value of the work progress)] for the purpose of CTC | 1 | Nos | 13,568.35 ₹13,568.35 | 13,653.98 ₹13,653.98 | 16,458.9 ₹16,458.9 | 12,286.72 ₹12,286.72 Lowest | 16,028.7 ₹16,028.7 |
Tender Value
₹26.3 L
EMD Value
₹33,000
Closing Date
17 Jun 2025, 5:00 pmClosed
Staff Officer(EnM), Jagannath Area, MCL
Jay Prakash, Staff Officer(EnM), Jagannath Area, MCL PH 06760-269717, 06670-269751(Extn)2023 Fax 06760-269527 E-mail so-enm-jaga.mcl(at)coalindia.in
Making and fabrication of float pontoons of 60 nos and 40 nos of HDPE drums for installation of pump motor set on the pontoons at different sumps and fabrication of CGI sheet shed for fieldswitch and starter at Bhubaneswari OCP, Bhubaneswari Area
2025_MCL_336865_1
GM(JA)/EnM/e-Tender/ 25-26/E-758/23 dtd. 03/06/2025
Open Tender
Miscellaneous Works
Item Rate
120 days
TALCHER
AS PER NIT
3 documents required · 3 mandatory
₹33,000
3 Sept 2025
4 Jun 2025
19 Jun 2025
5 Jun 2025
17 Jun 2025
5 Jun 2025
5 Jun 2025 - 10 Jun 2025
Amount
Loading to truck for transportation of drums & unloading at pump section.
Making of pontoon which includes (i)structural steel work riveted, bolted or welded in built up sections, trusses and framed work, (ii) Supply, handling and fitting of plastic barrel with cap, HDPE, 200-220 ltr, (iii) providing and fixing precoated galvanised iron profile sheets for covering sheds and (iv) Painting on the iron and steel frame with synthetic enamel paint of approved brand . (1) 60 drums pontoon: 3nos. (2) 40 drums pontoon: 2nos.
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
Supply, handling and fitting of plastic barrel with cap, HDPE, 200-220 ltr (all drumssize shall be same) including cleaning , tightening of caps using red oxide paint and putting inside the toe of newly fabricated Pantoon Structure: 60 drums
Providing and fixing precoated Galvanized iron profile sheets ( size, shape and pitch of corrugation as approved by Engineer-in charge) 0.50 mm( +0.05%) total coated thickness with zinc coating 120 grams per sqm as per IS:277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyster top coat 15-18 microns. sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 meter of as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5X55 mm) with EPDM seal, complete upto any pitch in horizontal/vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape whenever required.
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work
Fabrication of 01 no of CGI Sheet Shed (8x4=32 sqm ) for Fieldswitch and stater at Bhubaneswari OCP
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
Providing and fixing precoated Galvanized iron profile sheets ( size, shape and pitch of corrugation as approved by Engineer-in charge) 0.50 mm( +0.05%) total coated thickness with zinc coating 120 grams per sqm as per IS:277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyster top coat 15-18 microns. sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 meter of as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5X55 mm) with EPDM seal, complete upto any pitch in horizontal/vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape whenever required.
Total impact of GST plus Labour Cess [@ 1 % (BOCW Cess to be deducted from the RA bill as per the value of the work progress)] for the purpose of CTC
SAROJ KUMAR SAHOO (BID ID -1159159)
Shailesh Kumar Singh (BID ID -1161140)
M/S ALLIED ENGINEERING SERVICES (BID ID -1161516)
Raghunandan Gupta (BID ID -1161423)
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .