PROVISION OF CERTAIN SANCTIONED B R I B R II E M WORKS UNDER GE N PATIALA

Amount

B/R ITEMS

Excavation in trenches n. exc 1.5 mtr in depth for foundation etc and getting out in soft /loose soil complete all as specified and directed. (10.4+15+10.4+35+4.32+13.77)

Cement concrete 1:4:8 type D-2 using 40mm graded aggregate as in foundation, filling and mass concrete complete all as specified and directed.(1.2+2.1+1.3+1.5+1)

Brick work with sub class ‘B’ bricks curved on plan exc 6 M mean radius built in cement mortar 1:6 complete all as specified and directed.(11+18.4+13+19+1)

Brick work with sub class ‘B’ bricks curved on plan exc 6 M mean radius built in cement mortar 1:4 in half brick thick walls complete all as specified and directed.(5.2+14.2+5.7)

M&L for Reinforced Cement Concrete (RCC) 1:2:4 using 20mm graded stone aggregates as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed. (1.1+0.3+0.2+1.3)

M&L for Reinforced Cement Concrete (RCC) 1:2:4 using 20mm graded stone aggregates as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. (1.5+4.1+1.8+2.5+0.5)

M & L for form work rough finished to sides and soffits of roof beams, lintels cantilevers etc complete all as specified.(11+1.7+11)

M & L for Form work rough finished to soffits of suspended slabs such as roof slabs not exc 200mm thick (Horizontal or sloping) complete all as specified. (12+33.2+12+15+10)

M & L for Form work rough finished to edges of concrete slabs exc. 10 cm but not exc. 20 cm wide. (16+27.2+16)

Formwork to chajjas, troughs and similar items including edges complete.

Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor & roofs n exc 20 cm wide & sides of RCC/PCC bands in walls, horizintal or sloping & similar work exc 10cm but n exc 20cm wide Roughed finished surface of concrete

Form work of rough finished flat surfaces to edges of concrete slabs exc 5 cm but not exc 10 cm thick complete all as specified.

TMT Bars 10mm dia & over cut to length, bent to shape required including cranking, bending spirally hoping for columns, hooking ends and binding with mild steel wire not less than 0.9 mm dia complete all as specified. (250+40+950+250+500)

TMT Bars 8 to 10mm dia cut to length, bent to shape required including cranking, bending spirally hoping for columns, hooking ends and binding with mild steel wire not less than 0.9 mm dia

TMT Bars 6 to 8mm dia cut to length, bent to shape required as in stirrups hooking ends and binding with mild steel wire not less than 0.9 mm dia complete all as specified. (60+10+20+60)

Allas per item no 10 above but for 5mm dia and over upto and including 10mm dia in stirrps spaces and binders.

M&L for Baroda Green marble, machine cut as in shelves/steps/cills/jambs/skirting/border and the like works and flooring etc, 15-16 mm thick including bull-nosing the exposed sides, set and jointed in cement slurry over & including screed of 15 mm thick in cement mortar (1:4) and pointed in cement mixed with pigment to match the shade of slab including rubbing, cutting and mirror type granite polishing complete all as specified. Note : Single piece should be used in steps/cills/jambs/shelves. (0.5+2.4+0.5+5)

S&F stainless steel sink with drainage board, AISI 304 quality grade, 1.00 mm thick, glossy finish, for kitchen with plugs washers and CP waste coupling of 32mm dia and including cantilever cast iron brackets, connecting union, etc, overall size 915mm x460/928mmx458mm with bowl size 410x 355x185mm/430x355x200 and making good disturbed portion in CM 1:3 or PCC 1:2:4 as directed. Make : Sink :- Nirali (Elegance) or Diamond (REK 3618) or Neelkanth

Returning filling including watering, ramming in layers n. exc 25 cm thick in soft/loose soil complete all as specified. (5.1+6+5.1+5+3.888+7.77)

Earth filling under floors,spreeding levelling in layers n.exc 25 cm thick each and well ramming including water as required and removal of the excavated materials.

Supply and filling Dry clean sand for sand cushioning of underground cable complete all as specified and as directed. Note:-Sand shall be measured after punning down.

Removal of excavated soil n. exc 50 M away from the starting point complete all as specified. (5.3+9+5.3+30+0.432+6)

M&L for rendering 5 mm thick in cement mortar 1:3 as on concrete surfaces in ceiling finished even and smooth without using extra cement all as specified. (11+33.2+11+30+17)

M&L for rendering 5 mm thick on faces of brick work or concrete surfaces in CM 1:3 as in ceiling, all as specified and directed.

M&L for rendering 10 mm thick in cement mortar 1:6 , on brick or concrete surfaces, trowelled to even and fair finish without using extra cement complete all as specified. (9+12+9+200+50)

M&L for rendering 10mm thick on faces of brick work or concrete surfaces in CM 1:6, all as specified and directed.

Rendering 15 mm thick in cement mortar 1:3 , mixed with water proofing compound, on brick or concrete top surfaces of roof, trowelled to even and smooth finish without using extra cement as in roof treatment complete all as specified.

Rendering 10 mm thick in cement mortar 1:6 , on brick or concrete internal surfaces of walls, trowelled to even and smooth finish without using extra cement complete all as specified and as directed. Note: WPC paid and measered separetly complete all as specified.

M&L for cement plastering 15mm thick in two layers (10mm and 5mm respectively) in cemet mortar 1:4 including mixing of liquid water proofing compound as per manufacturer's instructions on brick work or concrete surfaces or in chajjas/parapet walls etc finished even and smooth without using extra cement complete all as specified and directed. Note : WPC will be measured and paid separately. (50+35+35+35)

M&L for cement plastering 15mm thick in two layers (10mm and 5mm respectively) in cemet mortar 1:4 including mixing of liquid water proofing compound as per manufacturer's instructions on brick work or concrete surfaces or in chajjas/parapet walls etc finished even and smooth without using extra cement and fixing of chicken wire gauge where directed complete all as specified and as directed by Engineer-in-Charge. Note : WPC and chicken wire gauge will be measured and paid separately.

Supply only integral liquid water proofing compound complete all as specified and directed.(1+1.9+1+4) Make : Pidilite/Sika

Supply only WPC by weight 3%.

M&L for applying acrylic thick wall care putty on internal/external surfaces of walls/ceilings/soffits (thickness vary from 1.5 to 2.5 mm as required for desired smoothness and levelling of surfaces in two or more layers) by using ready made wall care putty including sand papering after filling the putty to make surface smooth and ready for receiving painting etc complete all as specified and directed. (55+95.2+55+930+60) Make of wall Putty : JK wall Putty / Birla Wall care Putty / Bison Wall Putty. Notes : (i) The prepared surface after wall putty, the contractor will inform to the GE as well as to the Engineer-in-Charge for site inspection before applying further finishes. Please note that the further finishes work will start only after approval of the prepared surface from the GE as well as to the Engineer-in-Charge through site order.

Applying 02 coats of interior emulsion paint (light shade) @ 10 sq.m/litre/2 coats by using roller/brush to wall surfaces over & including a coat of interior wall primer @ 10 sq.m/litre/1 coat as recommended for under coat by manufacturer of interior emulsion by using following brands of emulsion and primer complete all as specified and directed. (9+12+9+400) Make of Interior Wall Primer : Asian / Berger / Nerolac [Best Quality]. Make of Interior Emulsion : Asian (TRACTOR) / Berger (BISON) / Nerolac (BEAUTY SMOOTH)

Preparation of new plastered surfaces of walls and applying 02 coats of interior emulsion paint (light shade) @ 12 sq.m/litre/2 coats by using roller to wall surfaces over & including a coat of interior wall primer @ 10 sq.m/litre/1 coat as recommended for under coat by manufacturer of interior emulsion and over and incl acrylic thick wall care putty (JK wall Putty / Birla Wall care Putty / Bison Wall Putty) on internal surfaces of walls (thickness vary from 1.5 to 2.5 mm as required for desired smoothness and levelling of surfaces in two or more layers) by using ready made wall care putty including sand papering after filling the putty to make surface smooth and ready for receiving interior painting complete all as specified. Make of Interior Wall Primer : Asian / Berger / Nerolac [Best Quality]. Make of Internal Emulsion : Asian (APCOLITE PREMIUM EMULSION) / Berger (RANGOLI TOTAL CARE) / Nerolac (PEARL) .

Preparation of new plastered surfaces of ceilings and Applying 02 coats of interior emulsion paint (white shade) @ 10 sq.m/litre/2 coats to ceiling surfaces over & including a coat of interior wall primer @ 10 sq.m/litre/1 coat as recommended for under coat by manufacturer of interior emulsion and over and incl acrylic thick wall care putty (JK wall Putty / Birla Wall care Putty / Bison Wall Putty) on internal surfaces of walls (thickness vary from 1.5 to 2.5 mm as required for desired smoothness and levelling of surfaces in two or more layers) by using ready made wall care putty including sand papering after filling the putty to make surface smooth and ready for receiving interior painting complete all as specified. Make of Interior Wall Primer : Asian / Berger / Nerolac [Best Quality]. Make of Interior Emulsion : Asian (TRACTOR) / Berger (BISON) / Nerolac (BEAUTY SMOOTH) .

M & L for preparing old painted steel and iron surfaces of any description, not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed by Engr-in-Charge. Make : Asian Paints/Berger/Nerolac

M & L for preparing old painted wood & wood based surfaces of any description, not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed by Engr-in-Charge. Make : Asian Paints/Berger/Nerolac

Preparation of surfaces and applying 02 coats of interior emulsion paint (light shade) @ 12 sq.m/litre/2 coats to wall surfaces over & including a coat of interior wall primer @ 10 sq.m/litre/1 coat as recommended for under coat by manufacturer of interior emulsion by using following brands of emulsion and primer complete all as specified and directed.

Applying 02 coats of interior emulsion paint (white shade) @ 10 sq.m/litre/2 coats to ceiling surfaces over & including a coat of interior primer @ 10 sq.m/litre/1 coat as recommended for under coat by manufacturer of interior emulsion by using following brands of emulsion and primer complete all as specified and directed.(11+33.2+11+130) Make of Interior Wall Primer : Asian / Berger / Nerolac [Best Quality]. Make of Interior Emulsion : Asian (TRACTOR) / Berger (BISON) / Nerolac (BEAUTY SMOOTH)

Applying 02 coats of exterior emulsion paint (light shade) @ 5 sq.m/litre/2 coats by using roller/brush to external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc surfaces over & including a coat of exterior wall primer @ 11 sq.m/litre/1 coat as recommended for under coat by manufacturer of exterior emulsion by using following brands of emulsion and primer complete all as specified and directed. (35+50+35+400) Make of Exterior Wall Primer : Asian / Berger / Nerolac [Best Quality]. Make of Exterior Emulsion : Asian (ACE) / Berger (WALMASTA) / Nerolac (SURAKSHA SUPERIOR)

Spreading and levelling in layers n exc. 25 cm thick including well ramming including watering as required complete all as specified. (2.5+5.2+2.5)

75mm thick cement concrete 1:4:8 type C2 using 40mm graded stone aggregate as sub base in floors over well rammed earth complete all as specified. (6.7+6.7)

100 mm thick cement concrete 1:4:8 type C2 using 40mm graded stone aggregate as sub base in floors over well rammed earth complete all as specified.

M&L for 100 mm thick PCC type C-2, (1:3:6) as in sub base of floor surface finished even and fair without using extra cement all as specified.

M&L for anti-skid ceramic joint free premium quality coloured tiles 300 X 300 mm and 6-7 mm thick, as in floors etc. in any pattern of light & dark tiles as approved, set & jointed in neat cement including and over 20mm th screed bed in CM (1:4) and pointed in white or coloured cement to match, in floors etc. complete all as specified. (7+17.8+7)

M&L for anti-skid ceramic joint free premium quality coloured tiles 400 X 400 mm and 6-7 mm thick, as in floors etc. in any pattern of light & dark tiles as approved, set and jointed in neat cement slurry and pointed in white or coloured cement to match, in floors etc. over & including 20 mm thick screed in cement mortar (1:4) over and pointed in white cement with pigment to match the colour of tiles complete all as specified. Make : Johnson (Digital HD Tiles) (Barstow or Sobaro Deep) or equivalent from Kajaria/Somany as approved by AO

Machine cut kota stone slab as in flooring of size 580 x 580 mm each & 18-20 mm thick, set and jointed in cement slurry including border of 100mm wide baroda green mable as per pattern approved over & including screed of 20-22 mm thick in cement mortar (1:4) and pointed in cement mixed with pigment to match the shade of slab including rubbing, cutting and mirror type granite polishing complete all as specified. Note : 1. All the edges of slabs shall be grinded/cutted at the right angle before laying, so that paper thin, smooth jointing to be obtained. 2. The colour of the slabs shall be uniform.

Machine cut kota stone slab as in skirting of length not less than 500 mm each & 18-20 mm thick, set and jointed in cement slurry over & including screed of 10 mm thick rendering in cement mortar (1:4) and pointed in cement mixed with pigment to match the shade of slab including rubbing, cutting and mirror type polishing complete all as specified .

M&L for anti-skid premium quality coloured tiles 400 X 400 mm and 7-8 mm thick, as in floors etc. in any pattern of light & dark tiles as approved, set and jointed in neat cement slurry and pointed in white or coloured cement to match, in floors etc. over & including 20 mm thick screed in cement mortar (1:4) over and pointed in white cement with pigment to match the colour of tiles complete all as specified.

Providing and Laying Premium (1st) quality digitally printed straight edge, glazed ceramic rectangle tile in approved shade and finish in coloured tiles 600 X 300 mm and 8-9 mm thick, in any pattern of light & dark/highlighters tiles etc as approved, on vertical surfaces such as in skirting/dado etc, set and jointed in cement slurry over & including 10 mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified.(28+66.2+28+65)

Brick hardcore of gauge n.exc 63mm deposited, spread and leveled in layers not exc 15cm thick, watered and rammed to true surface. (0.9+0.7+0.9+0.5)

Cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate as in plinth protection, 50 mm thick, surfaces finished even and fair without using extra cement as in plinth protection including provision of construction joints and filling the same with polyureathene (Make : Sikaflex) complete all as specified. (8+8.9+8)

S&F of Powder coated 50 microns extruded aluminium glazing/ doors & shutters made out of section 63.5x38.10x1.5mm for chowkats or frame & shutters made of size 44.45x44.45x1.5mm for side rails and middle rail, 114.3X44.45X1.5mm for top rails and bottom rails and including 5mm thick ACP sheet of approved colour below middle/lock rail and 5mm thick frosted glass above middle/lock rail and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beads 20mm size with and incl mortice lock with duplicate keys etc complete all as specified and directed including supply and fixing the following items: (a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm double action - 3 nos per leaf. (b) Powder Coated Aluminium Tower Bolt 200mm long - 2 nos per leaf (c) Powder Coated Aluminium Handles 200 mm - 2 nos per leaf (d) Power Coated Aluminium door stopper - 1 Nos Per leaf (e) Poder Coated Aluminium Sliding Bolt - 1 no per leaf Make (Aluminium Sections) : Jindal/Valco/Galco/Hindalco or equivalent as approved by AO. Note : Door shutters of wiidth more than 1.0 mtr shall be provided in double leafs. (5+8.8+5)

S&F factory made flush shutters 35mm thick, solid core construction, with particle board core and plywood face panels, commercial type on both sides with both faces are covered with decorative face veneer with 6mm thick lipping frame to match including supply and fixing following items : (a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm - 4 nos per leaf (b) Stainless Steel (304 Grade) Finished Tower Bolt 200mm long - 2 nos per leaf (c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 nos per leaf (d) Stainless Steel (304 Grade) Finished Sliding Door Bolt/Aldrop 16x250mm - 1 nos per leaf (e) Stainless Steel (304 Grade) Finished Floor Door Stooper - 1 nos per leaf

S&F 35mm thick glazed and skelton shutters of 2nd class hard wood (factory made) open rebated and divided to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutter as specified in SSR-91 Pt-1 section 8 clause 8.20(a), kiln seasoned and chemically pressure treated all as specified including stainless steel 304 Grade wire cloth (wire dia. 0.22mm) and the supply and fixing following items: (a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm - 4 nos per leaf (b) Stainless Steel (304 Grade) Finished Tower Bolt 200mm long - 2 nos per leaf (c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 nos per leaf (d) Stainless Steel (304 Grade) Finished Sliding Door Bolt/Aldrop 16x300mm - 1 nos per leaf

S&F powder coated 50 micron extrded aluminium doors & shutters made out of section 63.5x38.10x1.29mm for chowkats or frame & shutters made of size 44.45x44.45x1.29mm for side rails and middle rail, 114.3x44.45x1.29mm for top rails and bottom rails and including 12mm thick High Density Fibre Board pre-laminated on both sides (water proof) below middle/lock rail, and 5mm thick frosted glass above middle/lock rail and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beeds 20mm size with and complete all as specified and directed including supply and fixing the following items: (a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm - 3 nos per leaf (b) Powder Coated Aluminium Tower Bolt 200mm long - 2 nos per leaf (c) Powder Coated Aluminium Handles 150 mm - 2 nos per leaf

S&F powder coated 50 microns extruded aluminium glazing/ doors & shutters made out of section 63.5x38.10x1.29mm for chowkats or frame & shutters made of size 44.45x44.45x1.29mm for side rails and middle rail, 114.3X44.45X1.29mm for top rails and bottom rails and including 5mm thick ACP sheet below & 5mm th frosted glass above middle/lock rail and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beads 20mm size with and complete all as specified and directed including supply and fixing the following items: (a) Stainless Steel (304 Grade) Finished Butt Hinges 125mm - 3 nos per leaf. (b) Powder Coated Aluminium Tower Bolt 200mm long - 2 nos per leaf (c) Powder Coated Aluminium Handles 150 mm - 2 nos per leaf

Providing and fixing factory made extruded aluminium ventilators with 50 micron powder coating of frame of 63.5X38.10X1.29 mm including 5mm thick frosted glass in lower 65% portion of shutters and stainless steel wire gauge 0.36mm nominal dia of wire and average width of aperture 1.40mm in upper 35% portion of shutter and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beeds 20mm size with and complete fixed in all respect as specified. (1.2+3+1) Make (Aluminium Sections) : Jindal/Valco/Galco/Hindalco or equivalent as approved by AO

Providing and fixing factory made extruded aluminium ventilator with 50 micron powder coating of frame 63.5X38.10x1.29 mm including 5mm thick frosted glass in lower 55% portion of shutter and stainless steel wire gauge 0.36mm dia and 1.40 aperature in upper 45% portion of shutter and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beeds 20mm size with and complete fixed in all respect as specified (0.8+2)

S&F factory made aluminium 50 micron powder coated grill, opening size 101.6 X 63.5 mm (4"X2½") and of approx weight @ 1.345 Kg/sq.m complete fixed in position in windows in all respect as specified

S&F aluminium (extruded section body) machine floor door closer hydraulically regulated designation No 2 universal type suitable for door shutter 701mm to 850mm in width and weight between 36 to 60 kg and fixed all as specified. (1+1+1)

Cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate as in lintels upto 1.50 m clear span, cills , steps, seismic and other similar bands, copings, kneelars, apex stones, bed plates, bed blocks of hold fasts etc including necessary form work complete all as specified (0.3+0.5+0.3)

Providing and laying 3mm thick APP (Atactic Polyproplene Polymer) modified prefabricated five layer, weight not less than 4.0 Kg/Sqm water proofing membrane black finished, reinforced with non-woven polyster matt make as approved including of a coat of bitumen primer @ 0.40 ltr/sq.m by the same membrane manufacturer of density 0.87 to 0.89 Kg/Ltr at 25 degree C temperature and viscosity 70 - 160 cps Over the coat, 3mm th 5 layered APP membrane shall be laid using butane torch and sealling all joints etc after the surface complete as per standard practice as per manufacturers instructions. The vital physical and chemical parameters of the membrane shall be as under - (i) Joint strength inlongitueinal and transverse direction at 23 degree C as 650/450N/5cms (ii) Tear strength in longitudinal and transverse direction as 300 / 250 N/. Softening point of membrane not less than 150 degree C Cold flexibility upto 20 degree C when tested in accordance with ASTM (D05147) (iii) The laying of membrane shall be got done through the authorised applicator of manufacturer of membrane only all as specified and directed. (10+26.7+10+163) Make : Sika/STP/Fosroc

M&L for cement concrete tiles 25cm x 25cm x 22mm thick, machine pressed; set jointed and pointed in neat cement slurry in floors, and cut and polished laid over 20mm thick screed bed in CM 1:4 complete all as specified.(10+26.7+10)

M&L for PCC cement concete tiles of size 250x250 and 20 to 25mm thick laid as in roof floor over 15mm thick (1:4) cement bed, set, jointing and pointing with grey cement and pigment complete all as directed

M&L for PCC 1:2:4 using 12.5mm graded stone aggregates, steps; seismicand other similar bands, plinth courses, string courses, parapets and copings, kneelers, apex stones, bed plates, kerbs , water troughs and the like including.

S&F 15mm bore steel water tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floor etc complete all as specified. (15+15+20+15+15+15+15)

S&F 20mm bore steel water tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floor etc complete all as specified. (10+20+30+20)

S&F 20mm bore steel water tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floor etc and incl cutting chases if required for concealed water tubing and making good, cutting not exc 10 cm girth etc complete all as specified.(6+15+3)

S&F 25mm bore steel water tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floor etc complete all as specified. (10+25)

S&F 25mm bore steel water tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floor etc and incl cutting chases if required for concealed water tubing and making good, cutting not exc 10 cm girth etc complete all as specified.

S&F 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified. (2+2+1)

S&F 25mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified. (2+2+2+2)

S&F ISI marked doubled layered rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top / cover) 500 Ltrs capacity hoisted and fixed in position all as specified including 20 mm dia brass float valves, high pressure, with polythene float and fly nut complete screwed for 20mm bore iron pipe and including GI nipple/union of 20mm bore to connect GI tubing to PVC water tank complete all as specified and directed. (1+1+1) Make :Sintex/Diplast/Sheetal

S&F ISI marked doubled layered rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top / cover) 1000 Ltrs capacity hoisted and fixed in position all as specified including 25 mm dia brass float valves, high pressure, with polythene float and fly nut complete screwed for 25mm bore iron pipe and including GI nipple/union of 25mm bore to connect GI tubing to PVC water tank complete all as specified and directed. (1+1)

S & F Rotational moulded polythene water storage tank cylindrical vertical with closed top 500 ltr capacity hoisted and fixed in position, connecting to inlet or outlet and washout including disconnecting and demolition of existing tanks of any description

S&F 100mm Bore Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors or fixed to walls with clamps complete all as specified. (4+2+20+4) Note : Clamps for CI pipes will be measured and paid separately.

S&F 100mm bore cast iron waste and bend pipes in any length spun pipes with or without ears with cement joints laid in trenches or in floors incl necessary excavation, RFR and removing complete.

S&F 75mm bore cast iron waste and bend pipes in any length spun pipes with or without ears with cement joints fixed to wall complete.

S&F 75mm bore cast iron waste and bend pipes in any length spun pipes with or without ears with cement joints laid in trenches or in floors complete.

S&F Cast iron soil, waste and vent pipe, 75mm bore, spun pipes in any length, with or without ears, with cement joints, fixed to walls with and including stack clamps, nuts , bolts etc. and making necessary connections, fixed as in repair complete all as specified and directed.

M&L for Cast iron floor trap/nahani with long arm of min 450mm length, with dia of outlet 75mm including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified.

M&L CI floor trap with grating including jointing to waste pipe,fixed in cement concrete 1:2:4 type B1

Cast iron soil, waste and vent pipe, sand cast 100mm bore, sand cast in any length, with or without ears, with cement joints, fixed to walls with and including stack clamps, nuts , bolts etc. and making necessary connections complete all as specified after taking down of existing unserviceable pipe.

Cast iron soil, waste and vent pipe, sand cast 100mm bore, sand cast in any length, with or without ears, with lead joints, laid in trenches including necessary earth work complete all as specified.

S&F Cast iron soil, waste and vent pipe,100mm bore, sand cast in any length, with or without ears, with cement joints, fixed to walls with and including stack clamps, nuts , bolts etc. or laid in floor incl dismantling of old pipe and excavation of trenches, refilling and leveling of surface and making necessary connections, fixed as in repair complete all as specified and directed.

S&F for MS Clamps, Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay) and similar small articles conforming to Fe-290 Gde-E-165 all as specified

S&F Stack clamps for 100mm bore CI pipes made out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified. (5+5+5)

S&F 100mm bore stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays, including securing ends of stays to wall or roof complete.

M&L cast iron multifloor/floor/nahani trap 100 mm dia and 450 to 600 mm long including jointing with solvent cement in repair complete all as specified and directed.

S&F CI Bends (any radius), for 100mm bore CI pipes diminishing pieces or tapers (larger bore measured) fitted with oval access doors complete all as specified.(1+4+1)

Cast iron bends duck foot or heelrest, radius for 100 mm bore pipe, as in repairs, complete all as specified and directed.(1+4+1+2)

S&F CI bore bends (any radius) with duck's foot or heel rest for fixing of 100mm CI pipe complete.

S&F CI bore bends (any radius) with duck's foot or heel rest for fixing of 75mm CI pipe complete.

S&F CI Bends (any radius) with access doors, for 75mm bore CI piipes complete all as specified.

S &F Cast iron branch pieces single sand cast (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches, suitable for 100 mm bore pipe, fitted with oval access door jointed with lead joint, as in repairs ,complete all as specified and directed.

CI Cowl sand cast suitable for 100 mm bore pipe. (2+2)

S&F CI Bends (any radius), for 100mm bore CI pipes complete all as specified.

S&F 100mm bore Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified.

M&L for Cast iron floor trap/nahani with long arm of min 450mm length, with dia of outlet 100mm including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified.(3+2+3)

S&F CI gully traps, Centrifugal type 150 x 150mm size , square or roundmouthed, type 'P' or 'S' fixed in repair complete all as directed and specified. (1+1+1)

S&F Cast iron cowls for 100mm bore pipes complete all as specified.(1+2+1)

S&F cast iron junction combination 'T' of 100mm bore with access door complete all as specified.(1+2+1+4)

S&F 100 cast iron floor trap with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete.

S&F Cast iron cowls for 100mm bore cast iron pipes complete.

S&F PVC(HDPE) SWR , 40 mm bore, single socketed in any length with rubber ring joints using solvent as per maunfacture instruction, including S&F of bends/fittings as required and fixed to walls incl cutting chases if required for concealed water tubing and making good, cutting not exc 10 cm girth etc complete all as specified.

S&F PVC(HDPE) SWR , 110 mm bore, single socketed in any length with rubber ring joints using solvent as per maunfacture instruction, fixed to walls complete all as specified including fixing of pipe to wall with flat iron clamps of size 25 x 3mm, bolts, washers, nuts, nails etc, after taking down existing damaged rain water pipe complete all as specified and directed (3+3) Make : Astral / Prince / Finolex

S&F 50mm bore high density polyethylene pipes (HDPE) of pressure rating 10 kgf/cm2 laid in trenches or concealed fitting in walls complete all as specified and directed by Engr-in-Charge.

PVC(HDPE) SWR , 32 mm bore, single socketed in any length with rubber ring joints using solvent cement as per maunfacture instruction, including bends/tee/elbow etc. laid in walls for connecting bottle traps complete all as specified (4+3+5)

PVC (SWR) bends of any radius for 110mm bore complete all as specified.(2+2) Make : Astral / Prince / Finolex

Bib taps, CP, fancy type long nose minimum weight 400 gms screwed for 15mm bore of iron pipe or for brass ferrule and fixed all as specified. (2+10+1)

S&F fancy type, chromium plated long body bib tap, cast copper alloy with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule 15 mm borecomplete all as specified and directed by Engineer in Charge. Make: Jaquar / Marc/ Cera as approved by Accepting Officer.

S&F Bib taps, CP, fency type long nose with wall flange screwed for 15mm bore of iron pipe or for brass ferrule and fixed in position complete in all respect all as specified. (3+3) Make : Jaquar (Continental Series)/ Hindware (Contessa Plus Series)/ Cera (Ocean Series)/ Prayag (Neptune Series) as approved by AO

S&F Pillar taps, fancy type, long neck, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, with long screwed shanks and fly nuts, screwed for 15mm bore of iron pipe all as specified.(1+2+1)

S&F Concealed Stop Cock, fancy type, CP with long shank and cup, exposed part kit with wall flange, fitting sleeve, operating lever, adjustable wall flange and including regular brass body of concealed stop cock suitable for 15mm line with protection cap fixed in position complete in all respect all as specified.(2+3+1+1+2)

S&F Angular Stop Cock, CP, fency type with wall flange, fency type chromium plated cast copper alloy screwed down, high pressure, screwed ends for 15mm bore of iron pipe or for union and fixed in position complete in all respect all as specified. (5+3+8+3+3+6)

Stop cock cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule for 20 mm bore pipe all as specified fixed in repair.

S&F overhead shower 120mm dia with 225-230mm long brass shower arm with wall flange and incl all necessary accessories as recommended by manufacturer for fixing complete in all respect all as specified.

S&F overhead shower 70mm dia with 235mm long shower arm and incl all necessary accessories as recommended by manufacturer for fixing and taking down existing of any description/size complete in all respect all as specified.

Vitreous china wash down water closet pan ( pedestal pattern ) white including plastic seat & cover closed pattern with flat bottom etc connection to drain ( or out going pipe ) and to flushing pipe, antisyphonagee pipe,etc.,with flush pipe PVC 32mm dia and ; complete all as specified. (1+1)

S&F flushing cistern of PVC 10 ltr. cap. with dual flushing system, white colour, valveless syphonic action type, , low level, with inlet, ball valve, float and including brackets and connection to pipe etc. and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, packing and taking down existing of any description/size complete in all respect all as specified. (1+1+2+2) Make : Hindware (Sleek Essence Dual Flush) or Cera (Corona) or Prayag (Vintage) equivalent from Parryware

S&F PTMT brass jet spray with 1.5M PVC flexible tube complete in all respect all as specified and directed. (1+1+1) Make : Prayag (Cat No 522).

S&F vitreous china premium/1st quality wash basin (under counter), white, size 580x430 mm including S&F all accessories as recommended by manufacturer complete fixed in position in all respect as per manufacturer's instructions and all as specified.(1+2+1) Make : Hindware (WHB-Garnet (Cat No.- 10080) or equivalent from Parryware/Cera as approved by AO

S&F vitreous china premium/1st quality wash basin (table top), white / ivory / off white, size 460 x 460 x 170mm including all accessories as recommended by manufacturer incl. CP bottle trap 32 mm with inlet and outlet screwed for pipe or connections incl all necessary accessories for fixing, packing, union and incl 32mm brass CP waste coupling and complete in fixed in position in all respect as per manufacturer's instructions and taking down existing of any description/size all as specified and directed by Engineer in Charge. Make : Hindware/Parryware/Cera/Jaquar Cat No JDS-WHT-25935 as approved by Accepting Officer. Note : The items for counter will be measured and paid seperately.

S&F vitreous china premium/1st quality wash down water closet wall hung EWC P trap white/ivory/off white including connection to drain (or out going pipe) and to flushing pipe, antisyphonagee pipe,etc. incl. plastic seat cover as recommended by manufacturer closed pattern with flat bottom etc; and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, packing and taking down existing of any description/size complete in all respect all as specified. Make : Cera (EWC- Compact, Seat Cover - Carona) or equivalent from Parryware/Hindware/Jaquar as approved by Accepting Officer. (1+2)

S&F vitreous china premium/1st quality wash down water closet pan floor mounting (pedestal pattern/EWC) S/P trap white colour of size 520X360X390mm including connection to drain (or out going pipe) and to flushing pipe, antisyphonagee pipe,etc.,with flush pipe and incl. S&F plastic seat cover as recommended by manufacturer closed pattern with flat bottom etc; and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, packing and including and taking down existing of any description/size complete in all respect all as specified. Make : Cera (Conventional) or Hindware (Slick) equivalent from Parryware

S&F vitreous china premium/1st quality Orissa Pan water closet white colour of size 580X440mm including CI S/P 100 trap connection to drain (or out going pipe) and to flushing pipe, antisyphonagee pipe,etc.,with flush pipe and including and taking down existing of any description/size complete in all respect all as specified.(1+2) Make : Cera (Calina S3010102) or Hindware (Orissa Pan Eco) equivalent from Parryware

S&F Vitreous china premium/1st quality urinal white colour, of size 330x300x450mm incl providing and fixing plugs/brackets, bedding urinal against wall in CM 1:2, securing urinals to plugs with and incl S&F of all accessories for fixing as recommended by manufacturer like 60mm long brass secrews/fasteners/rag bolts etc, pointing urinal back in white cement; connecting for discharge pipe incl necessary packing, union complete all as specified. (1+2+2) Make : Hindware (Cat No. - 60022) or equivalent from Parryware/Cera/Jaquar as approved by AO

S&F vitreous china premium/1st quality wash basin half pedestal, white/ivory/off white, flat back, size 500x400 mm including pedestal, screws & plug and brackets etc. all accessories as recommended by manufacturer incl. CP bottle trap 32 mm with inlet and outlet screwed for pipe or connections incl all necessary accessories for fixing, packing, union and incl 32mm brass CP waste coupling and completein all respect as per manufacturer's instructions and taking down existing of any description/size all as specified.

Supply and fix viterous china premium / first quality urinal half style type white / ivory / half white, flat back, screwed and plug and brackets etc. all accessories recommended by manufacturer incl CP bottle trap 32mm let and outlet screws for pipe or connection including necessary accessories for fixing, packing, union and including 32mm brass CP waste coupling and complelet in all respect as per manufacturer instructions and taking down existing urinal of any description / size all as specified.

S&F vitreous china premium/1st quality wash basin oval shape (under counter), snow white size 595x420x200 mm including S&F all accessories as recommended by manufacturer for fixing, packing, union complete fixed in position in all respect and taking down existing of any description/size all as specified. Make : Hindware/Cera/Jaquar

S&F towel rail stainless steel 60 cm long between flanges and including all accessories like brackets/screws etc as recommended by manufacturer and complete fixed in position complete all as specified.(1+1+1)

S&F sheet glass shelf assembly consisting of 5.5 to 6mm thick glass shelf 12 cm wide and 450mm lomg with bevelled edges/hatching of edges fixed with stainless steel 'D' bracket fixed and railing complete all as specified.(1+1)

S&F cockroach trap gratings AISI-304 of size 150X150mm square in shape with 5mm border complete in all respect all as specified. (3+3+7+3+3) Make : Prayag (FT-31M) or equivalent as approved

S&F vitreous china premium/1st quality urinal division plates/partitions of size 720X320X90 mm including S&F all accessories as recommended by manufacturer for fixing, packing and taking down existing of any description/size all as specified. Make : Cera (Corvin) or equivalent from Jaquar/Parryware/hindware

S&F urinal valve auto/self closing pressmatic with built in control and wall flange and 200mm connection pipe for urinals and incl all necessary accessories as recommended by manufacturer for fixing complete in all respect all as specified. Make : Jaquar (PRS-077) or Cera (Cat No. - F9020203) (1+2+2)

S&F urinal spreader for urinals and incl all necessary accessories as recommended by manufacturer for fixing complete in all respect all as specified. (1+2+2) Make : Cera (Cat No. - F8070201)

S&F CP bottle traps 32mm size with 250mm and 175/190mm long wall connection pipes and wall flanges complete fixed in position complete all as specified. (2+4+3+2) Make : Jaquar (ALD-769L250X190) or Hindware (F850003)

S&F CP waste couplings 32mm size half thread with 80mm height complete fixed in position complete all as specified.(6+3+2) Make : Jaquar (ALD-709) or Hindware (F850001) (2+4)

S&F 450mm long PVC connection with 15mm brass nuts complete all as directed and specified.(3+8+3+3+6+6)

S&F 6mm thick looking mirror with smooth finish edges/sides fixed to wall with stainless steel brackets/plugs/connecter/spacers/ screws etc. chrome finish complete fixed in position all as specified and directed. Make : Modi/Atul/Prayag (0.5+2+0.5+3)

Reinforced concrete 150mm bore pipes, class NP3, laid and jointed complete with collars complete all as specified. (3+20+15)

M&L Reinforced concrete pipes 200mm dia, class NP3, laid & jointed complete with collars in trenches at any depth including jointing and testing complete, all as specified.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required complete all as specified.(1+1+1)

M & L Precast RCC 1:2:4 type B1 using 20mm graded crushed stone agg as in manhole cover slabs, of any thickness, size or shape incldg necessary form work, finished concrete surfaces fair & even in CM all as specified and directed by Engr - in -Charge. (0.1+0.1)

M&L for ceramic glossy finish, joint free premium quality coloured tiles 600 X 300 mm and 8-9 mm thick, in any pattern of light & dark/highlighters tiles etc as approved, on vertical surfaces such as in skirting/dado etc, set and jointed in cement slurry over & including 10 mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified. (35+60+30) Note : Dado should be flushed with the wall plastering. Make : Johnson (Digital HD Tiles) (Barstow Dark/Light/HL or Sobaro Deep/Bright/Bright Decor) or equivalent from Kajaria/Somany as approved by AO

M&L for satin/matt finish, square, glazed vitrified tiles (GVT), stainfree, Premium (1st) quality straight edge, coloured tiles 600 X 600 mm and 9-10 mm thick, as in floors etc. in any pattern of light coloured tiles as in approved shade, set & jointed in neat cement including and over 20mm th screed bed in CM (1:4) and pointed in white coloured cement to match, in floors etc. complete all as specified.

Demolition of brickwork or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles, all as directed and specified.(0.5+1+0.5+1)

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete.

M&L for 40mm thick cement concrete type B-2, 1:2:4 (using 12.5mm graded agg) as in sub base for flooring complete.

M&L for cement concrete 1:3:6 type C-2 for concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested in complete all as sepcified and directed.

Demolition of cement concrete un-reinforced in ground floors/FF/pavings or in any other positions n.exc 15cm thickness complete all as specified.

Demolition of reinforced cement concrete (RCC) of any description and in any position like floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete all as specified.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete. (45+60+40)

M&L for granite (of any type) stone 20 mm thick machine cut (table rubbed and polished), including grinding, bull nosing, moulding and polishing complete in cooking platforms/ basin counters and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, all as specified and directed

M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including laid over 15mm screed in CM 1:4 complete all as specified. Note : Single piece should be used in steps/cills/jambs/shelves.

PVC wall panelling hollow type of section sizes 250X8 mm (colour/pattern as approved by Accepting Officer) complete fixed in position in all respect including supply and fixing of all accessories like fasteners/screws/solvent etc all as recommended by manufacturer all as specified.

Taking down cement or cement lime plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc., all as specified and directed.

Taking down shutters exc 1 sqm but n.exc 2 sqm each and refixing in same opening after tilling work complete.

Taking down off shutters only any description exc 1.0 Sqm but not exceeding 2.00 sqm complete all as specified.

Taking down chowkats with shutters exceeding 1.5 Sqm but n .exc 4 sqm each (without taking off shutters from the frames).

Taking down cement plaster of any description, any thickness from external surfaces of walls/soffits etc. incl raking out joints, hacking for keys, scrubbibg down with water etc complete all as specified and directed by Engineer-in-Charge. (430+50)

Taking down chowkhats or frames (without taking off shutters from the frame) exc 1.5 Sqm and n. exc 4.00 Sqm incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified and directed.

Cutting chases in brick walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 for concealed water tubings, cutting not exceeding 10cm girth complete all as specified and directed.

S&F 6mm thick looking mirror fixed to wall with stainless steel plugs/connecter/spacers/screws etc. chrome finish with wooden beading french polished include 5mm thick PVC sheet on back side etc. complete fixed in position all as specified and directed.

S&F centre hole brass chromium plated basin pillar cock with 200mm extension body with regular spout with popup waste system with 450 mm long braided hoses complete all as specified and directed by Engineer in Charge. Make: Jaquar (Cat No FLR-5011N)/ Marc/ Cera as approved by Accepting Officer

S&F central hole brass chromium plated basin mixer with regular spout with/without popup waste system with 450 mm long braided hoses complete. Make : Jaquar (Continental Series)/ Hindware (Contessa Plus Series)/ Cera (Ocean Series)/ Prayag (Neptune Series) as approved by AO

S&F concealed flushing cistern of PVC 10 ltr. cap. with dual flushing system, valveless syphonic action type, with inlet/outlet, ball valve, float and including brackets and connection to pipe etc. and incl all necessary accessories etc as recommended by manufacturer for fixing, packing and including S&F of actuator knob/flush plates and making space/cavity in existing brick work wall for fixing and taking down existing of any description/size complete in all respect all as specified. Make : Hindware (Concealed Cistern-Cento, Flush Plate-Cento) / Cera (Concealed Cistern-Chevron), Flush Plate or equivalent from Parryware/Jaquar as approved by Accepting Officer.

S&F concealed flushing cistern of PVC 10 ltr. cap. with dual flushing system, valveless syphonic action type, with inlet/outlet, ball valve, float and including brackets and connection to pipe etc. and incl S&F of all necessary accessories/installation kit and 'S' type drain pipe connetion set for wall hung WC etc as recommended by manufacturer for fixing, packing and including S&F of actuator knob/flush plates and and taking down existing of any description/size complete in all respect all as specified.

S&F Health faucet (ABS Body) with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. Make : Hindware / Parryware / Cera/Jaquar as approved by Accepting Officer.

S&F health faucet with 8mm dia and 1.2 metre long flexible tube in chorme finish and wall hook including making connections and fixed in position complete in all respect as specified.

M&L Machine pressed rubber moulded ISI marked precast cement concrete interlocking paver block any shape and size and of colour 50% red coloured tiles and 50% grey coloured tiles confirming to IS-15658-2006 of 60mm thickness M-35 Grade and including filling of interstices with fine sand over including 25mm thick layer of sand chusion complete all as specified.

S&F single towel rail incl fixing to wall with complete accessories in position complete all as specified and directed by Engr-in-Charge. Make : Jaquar (Cat No AQN-7711)/ Cera/Parryware or equivalent.

S&F paper towel dispenser- towels with c/z folds paper towels- wall mounted (material - AISI 304 STAINLESS STEEL) satin finish fixed to wall with accessories incl taking down existing complete all as sepcified and directed by Engr-in-Charge. Make : Jaguar (Cat No - PTD-SAP-DT0106CS)/Cera/Parryware or equivalent.

S&F Urinal pot with auto sensor sprinkler complete fixing accessories set of size 480 x 300 x 740mm including necessary fixing arrangements and incl. CP bottle trap 32 mm with inlet and outlet screwed for pipe or connections incl all necessary accessories complete. Make : Jaguar, Cat No URS-WHT-132530/Cera/parryware or equivalent.

S&F soap dish holder stainless steel finish with complete accessories. Make : Jaguar, Cat No AKP-35731P or equivalent. (1+2)

S&F soap dish,stainless steel of suitable size to accommodate soap , tooth brush glass and tooth paste complete all as directed and specified.

S&F single lever basin mixer with popup waste system & 450mm long braided hoses, fency type, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, with long screwed shanks and fly nuts, screwed for 15mm bore of iron pipe and all as specified.

S&F soap dispensor with glass bottle fixing with complete accessories all as specified and directed by Engr-in-Charge. Make : Jaguar, Cat No AKP-35735P or equivalent.

S&F curved/ rectangular shaped urinal partition with frosted glass 8mm thickness chrome finish of ht 900mm, width 450mm incl fixing to wall with complete accessories complete all as specified and directed by Engr-in-Charge. Make : Jaguar (Cat No 1810-US/1810-UC)/ Cera/ Perryware or equivalent.

S&F toilet paper holder with stainless steel with complete accessories fixed to wall complete all as specified and directed by Engr-in-Charge. Make : Jaquar (Cat No AKP-35753PS)/Cera/ Perryware or equivalent. (1+2)

S&F peg set of 6 and including all accessories like screws etc as recommended by manufacturer and complete fixing in position complete all as specified. Make : Prayag (BEA-30) or equivalent as approved.

S&F soap dish brass glossy finish and including all accessories like screws etc as recommended by manufacturer and complete fixing in position complete all as specified. Make : Prayag (BA-45) or equivalent as approved.

S&F towel ring round with round flange and including all accessories like brackets/screws etc as recommended by manufacturer and complete fixed in position complete all as specified.

S&F Stainless Steel Towel Ring including all accessories as recommended by manufacturer for fixing and complete fixed in position in all respect and taking down existing of any description/size all as specified. Make : Jaquar/ Hindware/Parryware/Cera/Prayag

M&L for 100mm thick Cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate as in Floors/Hardstandings, surfaces finished even and smooth without using extra cement as in plinth protection including provision of construction/dummy joints 8X25mm, filled with polyurethane elastic adhesive/sealant (white/grey colour-sikaflex) of approx density 1.30kg/litre and form work complete all as directed by Engr-in-Charge and complete as specified.

Complete removal of existing treatment of any type/description from walls/RCC surfaces etc with mechanical means/grinder complete all as specified and directed.

Complete removal of existing treatment of any type/description from ceilings/RCC surfaces etc with mechanical means/grinder complete all as specified and directed. (100+10)

S&F 300mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate complete fixed all as specified.

Taking up or down existing steel tubing and connections, 15mm bore complete all as specified.

Taking up or down existing steel tubing and connections, 20mm bore complete all as specified.

Taking down of PVC water srorage tank of any size/description/position located on terrace of the building all as specified and directed.

Taking down of existing CI pipe of 75 to 100 mm bore and refixing the same including cement joints after cleaning & painting with 2 coats in any position complete all as specified and directed.

Taking down existing CI fitting of any dia/bore like bends/floor trap/nahani traps/traps/door 'T'/fourway junctions etc and refixing same after cleaning & two coats painting in position including cement jointing complete in all respect all as specified.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperature 1.40mm and fixed in repair with stainless steel wire stapples complete all as specified and directed.

Dismantling of Stone slabs & tiles of any description or thickness in floors, aprons etc. Laid, bedded & pointed in any mortar

Dismantling of brick tiles or terracing tiles single layers on roofs complete all as specified.

Demolition of mud phuska on roof any thickness all as directed.

Dismantling wall and ceiling boarding of any description, thickness including cover fillets complete al as specified and directed.

Roughening surfaces of old concrete floor/roof by picking, sweeping clean and washing down with water to remove dust, etc. complete all as specified.

PCC 1:2:4, type B-0 using 12.5mm graded stone aggregates as in padding over roof, minimum thickness at khurra as 20mm to maintain a slope of 1:100 ,complete all as specified and directed.

Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified.

Surface excavation n.exc 30cm deep & averaging 15cm deep and getting out in soft / loose soil.

M&L PCC in lintels upto 1.5 m clear span, cills, steps; seismic & other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded for chamfered angles and throating,including necessary form work as directed type B1 (1:2:4) using 20 mm graded aggregate

Preparation of new plastered surfaces of ceiling and applying three coat of white wash on ceiling surfaces all as specified.

Preparation of new plastered or unplastered surfaces of walls and applying three coats of white washing complete all as specified and directed.

Preparation of new plastered or unplastered surfaces of walls,soffits of chajjas & roof projections etc and applying two coats of cement base paint over one coat of cement primer etc complete all as specified.

50 mm thick PCC (1:2:4) type B1 (using 20mm grade aggregate) as in flooring for plinth protection finishing the surfaces even & smooth without using extra cement as in plinth protection.

M&L 75mm thick PCC type D-2, (1:4:8) using 40mm graded stone aggregate as in sub base

Salt glazed stone-ware gully traps, 150 x 150mm size , square or roundmouthed, type 'P' or 'S' incl CI grating fixed

Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe of 20mm having minimum weight 210gm/each fixed valve complete all as specified.

M&L Machine pressed precast concrete inter locking paver block any shape with grey cement and pigment size conforming to IS 15658-2006 of 60mm thickness,M-35 Grade laid over 50mm thick sand cushioning. Note :- sand shall be measured and paid separetly.

M&L Precast cement concrete type B1 (1:2:4) using 20 mm graded aggregate set in CM(1:4) in landings, cover slabs (for manholes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces

False ceiling of 12.5mm thick gypsum board over and including concealed grid system complete fixed in all respect and all as per manufacturer's instructions in one/two/three levels and making recess for light fittings as per pattern/design approved by Accepting Officer and including supply and fixing of connected items/hardware/frame work as recommended by the manufacturer of gypsum board all as specified. Note : The complete item shall be got executed through the authorised applicator of manufacturer only all as specified and directed. Make : ANCHOR / GYPBOARD / GYPROC

E/M ITEMS

M & L for point wiring with 1.5 sqmm(22/.3mm) PVC insulated and unsheathed FRLS single core stranded copper conductor for one light/fan and including metallic rigid concealed conduit medium grade 19/20 mm dia to be terminated in pressed steel terminal boxes with top cover plate including 1.5 sqmm (22/.3 mm ) PVC insulated and unsheathed FRLS single core stranded copper earth continuity conductor controlled by one switch and/or one regulator complete including repairing the surfaces in CM 1:3 and finishing the surface as per existing treatment all as specified and directed. (4+3+9+7) (Switches and regulators shall be measured and paid for separately.) (Wiring shall be done as per colour code in IS for phase, neutral and earth)

M & L for point wiring with 1.5 sqmm(22/.3mm) PVC insulated and unsheathed FRLS single core stranded copper conductor for one light/fan and including pvc rigid concealed conduit medium grade 19/20 mm dia to be terminated in pressed steel terminal boxes with top cover plate including 1.5 sqmm (22/.3 mm ) PVC insulated and unsheathed FRLS single core stranded copper earth continuity conductor controlled by one switch and/or one regulator complete including repairing the surfaces in CM 1:3 and finishing the surface as per existing treatment all as specified and directed (Switches and regulators shall be measured and paid for separately.) ( Wiring shall be done as per colour code in IS for phase, neutral and earth). (4+16)

All as per Sl item No 123.01 above herein before but one socket out let 5 pins 5 Amp on the same board but with other switches complete all as specified and directed.MAKE:Plaza, finolex,polycab,havells,gloster. (1+4)

All as per Sl item No 123.01 above herein before but one socket out let 3 pin 15 Amp Independent with 2.5 sqmm wire including 1.5 sqmm PVC insulated and unsheathed FRLS single core stranded copper earth continuity conductor complete all as specified and directed.

All as per Sl item No 123.01 above herein before but one socket out let 3 pin 5 Amp Independent with 1.5 sqmm wire including 1.5 sqmm PVC insulated and unsheathed FRLS single core stranded copper earth continuity conductor complete all as specified and directed.

All as per Sl item No 123 above herein before but one socket out let 5 pins 5 Amp on the same board but with other switches complete all as specified and directed. (1+1+1+1) MAKE:Plaza, finolex,polycab,havells,gloster.

All as per Sl item No 123 above herein before but one socket out let 3 pin 15 Amp Independent with 2.5 sqmm wire including 1.5 sqmm PVC insulated and unsheathed FRLS single core stranded copper earth continuity conductor complete all as specified and directed. (1+1)

S& F Modular switch 1 way, 6 Amps, 1 module complete all as specified and as directed. (5+3+10+8+5+20+100+60)

S & F Modular socket 5 pin 6 Amps, 2 module complete all as specified and directed. (1+1+1+1+1+6)

S & F Modular switch 1 way, 16 Amps, 1 module complete all as specified. (2+2)

S & F Modular socket 5 pin 6/16 Amps, combination type 2 module complete all as specified. (2+2)

Metal flush boxes mounting 3 module, made of MS chromium plated complete all as specified. (2+4)

Modular cover plate frame, 3 module complete all as specified. (2+4)

Metal flush boxes mounting 6 module, made of MS chromium plated complete all as specified. (1+1+2+2+4)

Modular cover plate frame, 6 module complete all as specified. (1+1+2+2+4)

S&F ceiling rose surface bakelite surface 65 x 50mm 3 terminals all as specified & directed. (2+1+2+2+4+6+150) Make:Plaza,Havells,SSK.

Supply and fix tube light fitting LED type retrofit T-8,20 watt,4 ft long incl LED tube rod and incl 3 core flexible wire 0.5 sqmm copper cable all as specified and directed. (2+1+2+2+2)

Supply and fix tube light fitting LED type retrofit T-8,20 watt,2 ft long incl LED tube rod and incl 3 core flexible wire 0.5 sqmm copper cable all as specified and directed. (2+1+2+2+2)

Supply and fix bulk head fitting LED type incl 1 x 9/10 watt LED lamp,with flexible wire 0.5 sqmm copper cable all as specified & directed. (2+1+1+1) Note: Bulk head fitting will be issue from store yard of MES.

S&F MCB DB double door 240 volts with 200 Amps standard bus bar of suitable size and common neutral link all enclosed in standard sheet flush mounting type, drilling holes for incoming and out going cables complete suitable for 4 ways with IP42 protection complete all as specefied and directed. Make:Schenider,Seimens,Legrand (1+1+1+1)

S&F MCB , SPN, 240 Volt , 40 amp for fixing in DBs of including proper thimble connections complete all as specified and directed. Make:Schenider,Seimens,Legrand. (1+1+1+1)

S&F MCB, single pole 240 volts 6 to 32 Amp capacity fixing in DB’s including proper thimble connections complete all as specified and directed. Make:Schenider,Seimens,Legrand (2+2+2+2+2)

Supply, Laying, Testing service electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 6 sqmm 2 core complete all as specifed and as directed. (20+20)

Supply and fix exhaust fan 230mm sweep with louver complete all as specified and directed. (1+2+2+1+1+2)

Supply and fix service wire 1100 volt grade heavy duty 10 sqmm 2 core complete all as specified and directed. (20+20+35)

Supply and fix Geyser 25 litre capacity incl all accessories complete all as specified and directed.

S&F LED Batten tube light fitting 1 X 20 Watt, 2 ft long incl LED tube rod and including 3 core flexible wire 0.5 sqmm copper cable complete all as specified and as directed.

S&F MCB 4 way DB double door 240 volts with 200 Amps standard bus bar of suitable size and common neutral link all enclosed in standard sheet flush mounting type, drilling holes for incoming and out going cables complete suitable for 8 ways with IP42 protection complete all as specefied and directed. Make:Schenider,Seimens,Legrand

S&F MCB, single pole and neutral SPN 240 volts 20 to 32 Amp capacity fixing in DB’s including proper thimble connections complete all as specified and directed. Make:Schenider,Seimens,Legrand

S&F powder coated pressure die cast aluminium campact LED security light fitting of 25 Watt with LED lamps including mounting arrangement i.e. GI pipe of suitable size, clamps, nuts, bolts, complete all as specified and as directed . Make:CG, philips/bajaj/wipro.

Taking down carefully existing points wiring on surface conduit/concealed conduit for light/ fan/socket /power/ bell from wall & roof along with fitting and fixtures such as switches, sockets, ceiling roses, batten holders, unserviceable light fittings, piece of wires,gutties, conduit, wooden boards etc and making good the disturbed portion of all floor, ceiling etc all as specified and directed.

Supply and fix ceiling light 2 ft x 2 ft led 36 watt complete all as specified and directed.

Supply & fixing of LED Flood light fittings of capacity 120 watts IP-66 , complete with accessories and mountig clamp including suitable nut/bolts/washers etc all as specified and directed at site. Note:- Contractor will submit the manufacturer test certificate and an extended warranty card for two years certificate by manufacturer Make:- Philips/Crompton/C&S/Halonix

Supply and laying XLPE 1100 volts grade heavy duty with PVC insulated, armoured cable, 4 core 10 sqmm in service supply connection passing through trenches, walls, road crossings and poles complete all as specified and directed.

Supplying and laying un-reinforced precast concrete cable cover , class LV, Type 1, flat of size 250 mm x 150 mm x 40 mm for cable protection, confirming to IS : 5820-1970 and having minimum average load breaking strength 200 Kg/Sqcm complete all as specified. Make : Surya Kiran Tiles and Pavers / National Tiles Corporation Panchkula / A-One Concrete Pvt Ltd / Unistone Product Ltd New Delhi or approved by competent authority.

Supply and fix steel tubular swaged poles type 410 SP-31 (9.0 meter long)complete with CI base plate and finial all as specified and directed at site.

Supply and fix junction box made out of PVC 30cmx20cmx10.5cm complete including aluminium bus barr of suitable size three phase with insulators and MCB SP of 16 Amps including mounting arrangement with steel tublar pole complete all as specified and directed.

Supply and fix PVC insulated round/flat copper cable of size 3 core 2.5 sq mm for connection of LED lights from FRP junction box to street light fittings complete all as specified and directed.

Earthing complete with Galvanized steel earth plate 600 x 600 x 6.0 mm buried directly in ground (earth pit not less then 2.25 Mtr deep below ground level) with top edge of the plate not less then 1.5 Mtr below normal ground level connected togalvanized earth lead wire 4.0 mm dia by means of bolts ,nuts ,check nuts and galvanized iron or steel incl excavation and earth work, GI pipe light grade 25mm/40 mm bore for protection of GI wire /strip from earth electrode to and incl the earth test point of gun metal or phosphorus bronze size of size 75 X 75 X 25mm drilled and screwed including, 3 NOS, 8mm dia 25mm long hex, head screw supplying and lying charcoal dust, common salt, PCC 1:3:6 type CI (using 20 mm graded crushed stone aggregate) as in chamber and MS angle iron frame 40 x 40 x 3mm and RCC cover 40 mm thick 1:2:4 type B1 (using 20 mm graded crushed stone aggregate) reinforced with 8 mm dia. TMT bars @ 75mm c/c both ways with MS handle 12 mm dia, PGI funnel and wire mesh, 20 mm dia GI pipe light grade for watering all as shown in electrical plate No. 3 of SSR Part I of 2009 and connected to earth test point incl testing complete all as specified and directed

Suppy and fix Rigid non-metallic PVC conduit 20 mm dia exclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers,lock nuts,saddles,pipe hooks etc.

M&L for iron frame work of suitable for symmetrically fitting of 4 Nos of LED Flood light fittings of capacity 120 watts and mounting on steel tublar pole complete with MS clamp bolts and nuts complete all as specified and directed.

Fixing only ceiling fan 1200 mm sweep incl making necessory connection with flexible wire to make it functional complete all as specified & directed.

M& L for fixing of hold fastener and hook of proper strength for hanging of ceiling fans 1200 mm incl drilling of holes at roof and finishing the surface with cement work of sufficient strength as if required all as per directed by Engineer-in-charge. NOTE:-contractor shall visit the site before quoting rate of this item

Point wiring with 1.5 sqmm(22/.3mm) PVC insulated and unsheathed FRLS single core multistranded copper conductor for one light/fan/bell point in and including PVC rigid non metallic concealed conduit 19/20 mm dia, medium duty, ISI Marked to be terminated in pressed steel terminal boxes with PVC modular top cover plates of suitable size for mounting of modular type switches/sockets/regulators including 1.5 sqmm (22/.3 mm ) PVC insulated and unsheathed FRLS single core multistranded copper earth continuity conductor controlled by one switch and/or one regulator complete including cutting chases and making good the surfaces in CM 1:3 and finishing the surface as per existing treatment all as specified. Notes: (i) Switches socket, regulators, Terminal Boxes and Top cover plate shall be measured and paid for separately. (ii) Wiring shall be done as per colour code in IS for phase, neutral and earth Make of wires : Finolex/Havells/Polycab

S & F Modular Fan regulator step type, 120 watts,2 module complete all as specified.

S&F fan regulator stepped type in laminated sheet

S&F Ceiling steller round surface mounted slim 12 watt light complete with driver and necessary connection complete all as specified and as directed.

Arneja Builders

KG BUILDERS

DELTA CONSTRUCTION CO