REPAIR TO ROAD SURFACE ROAD BERMS AND ROAD FURNITURE AT MIL STN SANGRUR UNDER GE SOUTH PATIALA

Amount

M&L for repair to pot holes any depth not exc 1.00 Sqm each including sweeping free from dust and mud or water. Scouring sunken surfaces in road, path etc cutting around edges to at least 25mm in depth, making good by applying tack coat @ 5 Kg per 10 Sqm, putting in premixed bitumenous macadum, well rammed and sealed with binder 9.8 Kg per 10 Sqm blinded with 0.09 cum of stone chipping, 6.3mm size and again well rammed (including supply of premixed macadum, binder and chippings) complete all as specified and as directed..

M&L for premix bituminous macadam,consolidated thickness 75 mm or less using paving bitumen grade VG-30 with binder contents 4.0% by weight of total mix,mix mechanically crushed stone aggregates with binder contents 4.0% by weight of total mix in batch type Hot Mix Plant of 100 - 120 TPH capacity transported to site by tippers etc, laid over a previously prepared surface, rolled and compacted with 8 to 10 tonne power roller to required gradient and camber all as per clause 504 of MORTH Specifications for Road and Bridge Works (Fifth Revision), complete all as specified and as directed. Note:- (i) The contractor shall quote the rate against item considering 3.5% VG-30 bitumen content. Job Mix/ Design for bituminous macadam shall be got designed from NIT / CTL / Govt Engg College and shall be got approved from GE in writing well before commencement of work without any financial effect to the department. Also the bitumen content shall not be less than 4.0% by weight of total mix as per clause 504.2.4 of MORTH specifications (Fifth Revision). (ii) If qty of binder contents is less than the qty as specified in respective items of BOQ, it shall be adjusted at supply only rates of paving bitumen @ Rs. 50.00 Per Kg and if qty of binder contents is more than the qty as specified in respective items of BOQ no adjustment shall be made.

Preparing black top surfaces by brushing with wire brushes for removing caked mud etc,sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc and applying evenly a priming / tack coat of paving bitumen VG 30 Grade @ 5 Kg per 10 Sqm mannualy or with mechanical sprayer complete all as specified and as directed.

M&L for laying bituminous premixed carpet 30 mm thick consolidated thickness with 0.41 cum stone chipping mixed with 21.60 kg paving bitumen grade V-30,mix the stone aggregates and paving bitumen in Hot Mix Plant (Batch Type) of 100 - 120 TPH capacity, carrying the hot mixed materials by means of tipper etc to site, laying the hot premixed materials over the prepared surface by means of paver finisher, rolled and compacted to required gradient and camber with 8 to 10 tonne power roller all as per MORTH specifications for road and bridge work (Fifth Revision) complete all as specified and as directed.

M &L for marking straight lines,dashes,arrows,strips,Zebra crossing and stops etc 100 mm wide and not less tnan 2.00 mm thick on road surface with road marking thermo plastic reflective paint mechanically with hot application of material (painting material @ 5 Kg/Sqm) and glass beads @ 250 gm / Sqm confirming to CI No. 803.4 of MoRTH complete all as specified and as directed.

Dismantling of bricks laid flat or on edge, laid dry as in road berms etc. complete including removal complete all as specified and as directed..

Demolition of cement concrete (un-reinforced) of any description, in ground floor not exceeding 150mm thick above or below ground level compete all as specified and as directed..

M&L for 75mm thick PCC 1:4:8 type D-2 using 40mm graded aggregate as in sub base of floor all as specified and as directed.

M&L for providing and laying 60 mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour,design &pattern as in footpath, parks,lawns, driveway or light taffic parking etc of required strength,thickness&size/shape made by vibratory method using PU mould, laid in required colour & pattern over and including 50 mm thick compacted bed of fine sand, compacting and proper embedding/laying of interlocking paver blocks into sand bedding layer through vibratory compaction by using plate vibrator, filling joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and as directed.

M &L for providing and laying 60 mm thick factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed in cement mortar 1:3 including making joints with or without grooves (thickness of joint except at sharp curves shall not be more than 5mm) including making drainage opening where ever required complete all specified and as directed.

Preparing new or previously untreated surfaces of any descripition, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint plastic emulsion over a coat of priming paints plaster coat complete all as specified and as directed

S&F Solar delinators made of polycarbonate and aluminium alloy body of 80 mm dia and 1000mm height, 4 nos LED which gives 360 degree viewing, solar panel 2.5 V, 1.25 V recharagable battery-01no, embedded in PCC 1:2:4 type B2 of block size 20 cmx30cmx30cm including necessary earth work and taking down old unserviceable delinators complete all as specified and as directed

JAY TEE KAY INFRA (BID ID -3356737)

AP BUILDERS (BID ID -3359141)