REPAIR /MAINT OF FLOOR, PLINTH PROTECTION, ETC IN H-WING, FASF LINE AND TRG AREA UNDER AGE B/R-II GE BABINA.

Amount

Demolition of cement concrete (unreinforced) in ground floor and paving n,exc 15cm thickness below or above ground level)complete all as specified and as directed

M&L for 75mm thick cement concrete 1:3:6 type C1 ,using 20 mm graded crushed stone aggregates as in plinth protection/path laid in alternate panel , joint filled with bitumen 85/25 , surface finished even and fair complete all as specified and as directed. Note : The cost of materials for forming and filling joints deemed to be included in the unit rate quoted by the tenderer.

M&L for Machine cut kota stone slab flooring 18-20mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including Screed bed or bedding layer or mortar 15mm layer of mortar 15mm thick for laying floor finishes with CM (1:6) complete all as specified and as directed.

M&L for 100mm thick Cement concrete 1:2:4 type B-1, (using 20mm graded aggregate) in floor complete all as specified and as directed.

M&L for 40mm thick cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) finish even & smooth with using extra cement complete all as specified and as directed.

M&L for mirror grinding & polishing on old marble/ granite/ Kota stone/ stone work where ever required to give high gloss finish complete all as specified and as directed.

Material & Labour for PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete ,sub base of floor etc complete all as specified and as directed.

Dismantling of Stone slabs & tiles of any description or thickness in floors, aprons etc. Laid dry or laid dry & pointed complete all as specified and as directed.

M&L for Glossy finish Chequered cement concrete tiles 30cm x 30cm x 22-25mm thick approved colour, design & pattern as in footpath, parks, lawns, parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern, set, jointed and pointed in grey cement with color pigments slurry in floors over 15mm CM (1:6) thick screed bedding specified and directed by engr-in-charge.

M&L for Glossy finish 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete.complete all as specified and as directed.

M&L for Glossy finish 80mm thick factory made chamfered edge cement concrete paver block of M-40 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete.complete all as specified and as directed.

S&F in repair 10 ltr capacity PVC low level flushing cistern white, ISI marked make as specified with inlet, float valve and handle including breacket with 32mm dia PVC pipe 600mm long complete all as specified and directed

S&F in repair of Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) in repair including Plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed.

S&F in repair vitreous china squatting pan orissa pattern of size 580x440mm white with integral foot rest and including connection to trap and to flushing pipe, anti syphonage pipe etc. complete including making good to floor complete all as specified and as directed.

S&F in repair vitreous china wash hand basin, white flat back, size 550mmx400mm fixed on and including cast iron cantilever brackets, 32mm dia brass waste coupling and including fixing of tap, waste fitting and union complete all as specified and as directed . Note: pillar tap shall be measured as supply only under respective items

S&F in repair Vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe complete all as specified and as directed.

S&F in repairs Vitreous China Urinal, Half stall type & height not less than 600m with urinal spreader, white PVC ,white with pvc connection , waste pipes and all accessorise complete all as specified.

S&F in repairs Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe (minimum weight 60 gms) complete all as specified and as directed.

S&F CP Soap Dish holder complete all as specified and as directed.

Supply & Fix in repairs white colour Vitreous China wash down water closet pan semi-pedestal pattern (Anglo-Indian Type), including CP Jet system & white colour seat cover fixed complete all as specified and directed.

S&F in repairs floor Gratings complete all as specified and as directed.

S&F PVC connection 15mm dia with Brass nuts of length 450mm etc complete all as specified and as directed.

S&F 15mm dia pillar taps cast copper alloy with capstan heads, cromium plated screwed down high pressure with or without lettered Hot or Cold with long screw shanks and fly -nuts screwed for iron pipe and fixed omplete all as specified and as directed.

Taking down door shutter exc 1 Sqm and n exc 2 Sqm and refixing including fixing of required fitting etc complete all as specified and as directed by EIC.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L 25mm thk PCC 1:2:4 type B-0 using 12.5 mm graded agg as in flooring finished fair and even without using extra cement complete all as specified and as directed.

M&L non skid ceramic colour tiles 300x300 7 to 8 mm thick (square/rectangular) set and jointed in neat cement slurry and pointed in colour cement to match as in floor including 15mm thick cement mortar screed bed 1:4 complete all as specified and as directed

M&L non skid ceramic colour tiles 400x400 7 to 8 mm thick (square/rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm set and jointed in neat cement slurry and pointed in colour cement to match as in floor including 15mm thick cement mortar screed bed 1:4 complete all as specified and as directed

M&L for Vitrified Ceramic tiles 600x600 8 to 9 mm thick (square/ rectangular) polished, in floors etc.including 15mm thick cement mortar screed bed 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L light shade mat finish Vitrified Ceramic tiles 600x600 10mm thick in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

M&L for Vitrified Ceramic tiles 600x1200, 10 mm thick (square/ rectangular) polished, in floors etc.including 15mm thick cement mortar screed bed 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

Material and labour for colour printed glazed ceramic tiles (300x 450mm / 300x600 6 to 7mm thick as in wall,dado/skirtings set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick cement plaster in cement mortar (1:4) complete all as specified and as directed by the Engr-in-Charge.

M&L digital glazed ceramic colour tiles 300mmx600mm, 6 to 7mm thick set and jointed in neat cement slurry and pointed in coloured cement on vertical surfaces such as skirting/dado including 10 mm thick rendering/screeding in cement mortar 1:3, complete all as specified and directed

M&L Stone slab 25mm to 35 mm thick dressed true and square, in one length not less than 60cm and n. exc 120 cm in copings, window cills, chajjas, sunshades, etc., complete all as specified and as directed.

M&L for 18-20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match the shade of granite stone including cutting and polishing types over 15 mm thick in CM(1:6) etc complete all as specified and as directed.

Demolition of Brickwork of stone/boulder masonry, build in lime mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles etc complete all as specified and directed.

M&L for old size brick work with fly ash bricks (FASB) conferming to IS 12894, of strength M-10 straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and as directed. Note : Old clay brick optained from demolition will not be utilised in work.

Taking down cement plaster on brick/concrete or stone walls etc incl racking out joints hacking for key and scrubbing down with water etc complete all as specified and directed.

M&L Rendering 15 mm thick in CM (1:4) on concrete/brick surfaces on wall etc incl finishing the surface even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 10 mm thick CM (1:6) on concrete/brick surfaces of wall etc incl finishing the surface even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar 1:3 mixed with water proofing compound as per manufacturer instructions surfaces finished even and smooth without using extra cement complete all as specified and directed. (Note :- WPC shall be measured and paid seprately)

M&L for applying two coats of spray/brush applied of Smart Care Ultron Liquid membrane of Asian pant Ltd or equivalent as approved by GE in proportions as per manufacturer instruction complete on surfaces floor and wall of sunken portion complete all as specified and directed.

M&L for plain cement concrete 1:5:10 type D-2 (using 40mm graded bricks bats) as in filling & mass concrete in floor and sunken portion complete all as specified and as directed by Engineer -in-charge.

M&L for 25mm thick PCC 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) as in sub base, floors and pavings etc. complete all as specified and as directed.

Supply only integral water proofing compound complete all as specified and as directed.

M&L for preparing of new surfaces and applying two coat of oil emulsion distemper on walls including 1mm thick putty complete all as specified and as directed.

M&L for complete removal of existing treatment from surface of wall and applying two coat of oil bound distemper including 1mm thick putty all as specified and as directed by the Engineer-in-Charge

M&L for P.C.C 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in coping and on roof etc complete all as specified and as directed.

Dismantling of PVC or AC drain pipe jointed in cement mortar of size 100mm bore complete all as specified and as directed.

S&F 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in wall and fixed with MS clamp complete all as specified and as directed.

s&F of 110mm dia PVC (SWR) bends any radius complete all as specified and as directed.

S&F of 110mm dia PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and as directed.

Demolition of RCC water storage tank of size exc. 600x1200x1000 mm but n.exc 1200x1600x1500mm on roof, floor, staging complete and the scrap should be removing to distance of 50m where directed by EIC.

S&F rotational moulded,multilayer HDPE water storage tank of 500 ltrs 3Layer white color capacity (Cylindrical vertical with closed top) ISI marked fixed in position on existing places complete all as specified including 02 Nos 20mm dia full threaded GI tank niple, 20 mm dia PTMT float valve epoxy coated Aluminium rod with high density plastic float ball( of minium weight 210 gms) and refixing of inlet, outlet & overflow pipe etc, complete all as specified and as directed.

S&F rotational moulded,multilayer HDPE water storage tank of 1000 ltrs 3Layer white color capacity (Cylindrical vertical with closed top) ISI marked fixed in position on existing places complete all as specified including 02 Nos 20mm dia full threaded GI tank niple, 20 mm dia PTMT float valve epoxy coated Aluminium rod with high density plastic float ball( of minium weight 210 gms ) and refixing of inlet, outlet & overflow pipe etc, complete all as specified and as directed.

S&F in repairs Stop Valve 20 mm, cast copper alloy, screwed down high pressure with crutch or butterfly handle etc complete all as specified and directed.

S&F in repairs Stop Valve 25 mm, cast copper alloy, screwed down high pressure with crutch or butterfly handle etc complete all as specified and directed.

Taking up or down existing steel tubing 15 mm bore and including connections etc complete all as specified and as directed.

Taking up or down existing steel tubing 20 mm bore and including connections etc complete and as directed.

Supply and fixing, jointing and testing galvanised iron tubing 15 mm bore medium grade with all fittings such as bends, elbows sockets, reduces etc and fixed to wall, ceiling or laid in floor etc complete all as specified and directed.

Supply and fixing, jointing and testing galvanised iron tubing 20 mm bore medium grade with all fittings such as bends, elbows sockets, reduces etc and fixed to wall, ceiling or laid in floor etc complete all as specified and directed.

Supply and fixing, jointing and testing galvanised iron tubing 25 mm bore medium grade with all fittings such as bends, elbows sockets, reduces etc and fixed to wall, ceiling or laid in floor etc complete all as specified and directed.

S&F in repair of CP bib cock, 15 mm dia with wall flange made of cast copper alloy, chromium plated, fancy type complete all as specified and directed.

S&F in repair of CP Pillar cock, 15 mm dia with flange made of cast copper alloy fancy type, complete all as specified and directed.

S&F in repair of CP fancy type stop cock, 15 mm dia with flange made of cast copper alloy, complete all as specified and directed.

S&F in repair of CP two way angle cock, 15 mm dia with wall flange, ISI Marked, complete all as specified and directed.

S&F in repair of CP two way bib cock & angle cock, 15 mm dia with wall flange, ISI Marked, complete all as specified and directed.

S&F in repair of CP health faucet with 8 mm dia, 1, complete all as specified and directed 1.5 mtr long flexible tube & wall hook, made of cast copper alloy, complete all as specified and directed.

S&F in repair of CP wash basin mixer, pillar type with out popup waste system, 15 mm dia with flange made of cast copper alloy, complete all as specified and directed.

S&F in repair of CP wash basin mixer, swan neck type with out popup waste system, 15 mm dia with flange made of cast copper alloy, complete all as specified and directed.

S&F in repair of CP wall mixer, incl provn for shower connection, 15 mm dia with flange made of cast copper alloy, complete all as specified and directed.

S&F in repair of CP wall mixer swan neck type, for kitchen 15 mm dia with flange made of cast copper alloy, complete all as specified and directed.

Taking down chowkhat or frames with shutters (without taking off shutters from the frame) not exe 1.5 Sqm each etc complete. Note:- Including cutting of hole as required at site for taking down and making good of disturbed portion with brick work of CM 1:6 or PCC 1:2:4

M&L Powder coated Anodised aluminium frame straight for doors / windows using aluminium section of minimum size 100x44mmx1.60mm thick fixed in position by means of steel screws and patent rawl plugs / bolts / hold fasts of suitable size including taking down door/window complete all as specified and directed

S&F 12 mm thick prelaminated particle board exterior grade both side laminated and fixed to aluminium frame complete all as specified and as directed.

M&L for powder coated anodised aluminium door shutter fabricated out of aluminium section 1.60mm thick two side openable with top rail and stiles of size 83x44mm, lock and bottom rail of size 100x44mm, (two panels) with and including 5mm thick plain colour PVC sheet (Rajshree make) and 5mm thick ordinary sheet glass duly covered with tinted solar control film, including jointing cleats, glazing clips, rubber packing, aluminium anodised snap beading, screws, anodised aluminium fittings such as hinges (B-21) handles (disc type), tower bolts (200mm long), locking device with duplicate keys complete all as specified and directed.

S&F for double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover governing pivot made of brass, other parts made of mild steel heavy duty and fixed

S&F for aluminium die cast body door closer hydraulically regulated designation No 3 universal type, suitable for door shutters of 851 to 1000 mm in width and weight between 61 to 80 Kg and fixed in repair complete all as specified and as directed.

M&L for Powder coated Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineerin-Charge

M&L framed work as grills, gratings, etc with ends of bars shouldered and/ or riveted into spikes; or forged into spikes, framed guard bars; barred iron doors and similar work confirming to Fe 290. Gd-E-165 complete all as specified and as directed.

Supply and fix 4.0mm thick Sheet glass, ordinary quality duly covered with tinted solar control film, including jointing cleats, glazing clips, rubber packing, aluminium anodised snap beading, screws,each pane etc complete all as specified and as directed by the Engr-in-Charge.

S&F in repair SS wire cloth 0.36 mm nominal dia of wire and average width of apperture 1.40mm and fixed with stainless steel staples in steel/wooden /aluminium frames complete all as specified and as directed by the Engr-in-Charge.

Dismantling of wall and celling board ( fiber, pulp, insulation, etc.) or insulated boards/slabs/blankets any thickness, including cover fillets complete all as specified and as directed.

S&F Powder coated galvanised MS grid frem work false ceiling of (main T size 32mmx24mmx0.45mm cross tee 24mmx24mmx0.35mm & wall angle size 19mm x 19mm x0.35mm with slot for fixing including suspended with 2mm dia GI wire hangers fixed with steel dash through fasteners from purline of the roof complete all as directed.

S&F 4 mm thick high pressure steam cured (HSPC) preprime non asbestos fiber cement designer board of size 600mm x 600mm /595mm x 595mm decorative finish as in ceiling complete all as specified and directed.

Cleaning & removing all scale & dirt, etc. from 500 litres tank and from mouths of circulating pipes, etc complete all as specified and as directed.

Cleaning & removing all scale & dirt, etc. from 1000 litres tank and from mouths of circulating pipes, etc complete all as specified and as directed.

Dismantling AC /CGI /PGI sheet roofing with ridge (corugated or semi corrugated) complete all as specified and as directed.

S&F Pre-painted galvalume aluminium zink coating AZ-150 GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed self tapping screws complete all as specified and as directed.

S&F Pre-painted galvalume aluminium zink coating AZ-150 GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed self tapping screws complete all as specified and as directed.

S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.Fe-290 Gde E-165 complete all as specified and as directed.

M&L rendering 10 mm thick in CM 1:3 on fair faces of brick/concrete surfaces of sunken floors incl WPC finished even and fair with out using extra cement complete all as specified and as directed. (WPC will be measured paid separately).

M&L for PCC 1:2:4 type B0 12.5 mm stone aggregate of avg 25 mm thick make to slope in sunken floors complete all as specified and as directed.

M&L for two or more coat of Epoxy (Hardener and raiser ) coating over primer over new prepared wall /floor surfaces in sunken floor complete, all as directed and as specified.

M&L for PCC (1:5:10) type E2 using 40 mm graded stone aggregate as in filling and mass concrete complete all as directed and as specified.

Taking down chowkhats or frames of any description exc 1.5sqm and n exc 4 sqm each (without taking off shutters from the frame) complete all as specified and directed. Note:- Including cutting of hole as required at site for taking down and making good of disturbed protion with brick work of CM 1:6 or PCC 1:2:4.

M/S RAJ KUMAR SINGH (BID ID -3267446)

M/S M S Constructions (BID ID -3256335)

M/s Pratham Enterprises (BID ID -3267042)

N K ENTERPRISES (BID ID -3267172)

DEVENDRA ENTERPRISES (BID ID -3267540)