REPAIR MAINT OF STREET LIGHT SECURITY LIGHTS FLOOD LIGHT HIGH MAST LIGHTS JUNCTION BOXES AND CONNECTED WORKS OF MD ACCN AT FARIDKOT MIL STATION

Amount

Attending the complaints of unserviceable LED street light/high mast light fitting comprising of 45W/ 60W/ 80W/160 Watt of any make any model fitted on the pole at any height with any type of fixing arrangement by taking down and checking loose connection in FRP box/ ACSR conductor or street light and making it serviceable and refixing it to the proper height and removing hanging grasses etc and tightening of all nuts, bolts, clamps and fixing of the street light at proper direction all as directed by Engineer-in-Charge

M&L in repair of surge protection device (SPD) Suitable for 45 watt LED street light complete all as specified and directed

M&L in repair of driver suitable for 45 to 60 watt LED street light complete all as specified and directed

M&L in repair of driver suitable for 80 watt LED flood light complete all as specified and directed.

M&L in repair of surge protection device (SPD) Suitable for 80/160 watt LED street light complete all as specified and directed.

M&L in repair of Driver Suitable for 160 watt LED street light complete all as specified and directed

S&F bracket made out of GI tubing light grade 25mm dia, 1.5 metre long bent to shape at 120 degree angle at half metre from bottom, including two Nos clamps made out of MS Flat iron of size 25x4 mm with suitable nuts and bolts for holding/fixing of bracket on steel pole including painting to MS clamp and nut bolts with two coats of aluminium paint over a coat of red oxide primer, complete all as specified and directed by Engineer-in-Charge

M&L in repair automatic street light timer switch using infrared sensor based for single phase & three phase timer complete including taking down old unserviceable switch all as specified and directed

S&F in replacement power contactor 25 to 32 Amps, for single phase for automatic street light timer complete all as specified and directed

S&F in replacement power contactor 32 to 40 Amps, for three phase for automatic street light timer complete all as specified and directed

S&F in replacement PVC insulated multi stranded aluminium conductor cable sheathed 4 sqmm two core and making connections of street light , flood light etc. complete all as specified and directed

M&L in repair Hot moulded (FRP) junction box of size 250mm x 200mm for street light pole with locking arrangement with 32 Amps, 4 way heavy duty terminal block suitable connection for three phase incoming cable three phase outgoing cable and single phase connection for light fittings including MCB SP 10 Amps 01 Nos enclosed in thermoplastic box in closed shock proof safe IP 65, weather, vermin proof, dust and water proof complete with two number cable entry gland of standard size with suitable size mild steel clamps to fix on pole complete all as specified and directed by Engineer-in-Charge. Make : Neptune/ Hensel/ Sintex or equivalent as approved by GE

S&F in replacement of copper conductor multi-stranded 1.5 Sqmm 2 core 1100 volts grade complete all as specified and directed

M&L in replacement twin core 6 sqmm nominal cross sectional area multi-stranded aluminium conductor cable over all PVC sheathed, 1100 Volts grade heavy duty cable PVC insulated complete all as specified and directed

Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth for laying of cables, pipes etc. and getting out soft/loose soil including returning filing and removal of soil and making good disturbed surfaces complete all as specified and directed

Returning filling in including spreading levelling watering and well ramming in layers n.exc 25cm all as specified and directed.

Removing the excavated soil from the trench n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point all as specified and directed.

Boring/Drilling (horizontally) manually under existing road, pavement, hard standing suitable for passing GI tubing of 40 mm bore complete all as specified.

S&F galvanised mild steel pipe /tubing of size 40 mm bore dia, light grade complete with all fittings, laid in trenches / under roads, drain, paths, fixed to poles/ walls with clamps, bolts, nuts and washers complete all as specified and directed

Supply and laying double wall corrugated pipe (DWCP) of inner/outer dia 50/38 for including passing of LT cable upto size 16 Sqmm, Non-metallic, resistance to compression : type 450, resistance to impact; normal, resistance to bending: pliable, resistance to external influence; ingress protection: IP 67, resistance against corrosion: without protection, resistance to flame propagation: non flame propagating, conforming to IS-16205 (part-24) 2017 including necessary jointing material i.e snap fit coupler with rubber ring, sealing plug, tees, bend, angel bend etc for passing electrical cable complete all as specified and directed by Engr-in-Charge

S&F high mast lights LED flood light luminaires of 150/160 Watts system wattage for energy saving having IP 65/66 degree of protection, with minimum system efficiency as>85%,made of pressure die casting aluminium housing power coated in graphite grey and heat resistant toughened glass with excellent thermal management and prismatic polycarbonate covers for ensuring efficient optics and uniform distribution of light fitting should have operating voltage range of 150-270 VAC, THD<20%, P.F>.95 and fitting should have in built surge protector of 5 KV and CRI>70 with CCT 5700 K including taking down of old unserviceable flood light fittings any type complete all as specified and directed

Dismantling existing high mast pole of 16 meter height with flood light & fittings etc and shifting from existing site to another site and installing at new site with 02 Nos anchor plates for each highmast pole having minimum thickness 10mm and of size as per existing, required numbers of bolts 760mm long and minimum dia 25mm with nuts, RCC foundation incl mild steel TMT bars 10/12mm dia cut to length, bent to shape as required, including crancking, bending and binding with mild steel wire (annealed) not less than 0.9mm dia and making panel fixing and connecting etc complete all as specified and directed. Note:- Rate quoted will be inclusive of excavation, earthwork, RCC work, steel for base, shiffting etc complete.

S&F in replacement MCB TPN 40 Amp, 415 volts complete all as specified and directed.

S&F in replacement of LED post top lantern with die cast aluminium spigot, spun aluminium powder coated top cover and clear acrylic diffuser. IP65/66, 20 Watt including fixing arrangement with proper connection complete all as specified and directed

M&L for servicing the raising and lowering mechanism of high mast light with opening the gear box and greasing of all moving parts for smooth functioning of raising and lowering of the lantern carriage for maintenance purposes complete all as specified and directed.

Cutting, Trimming of tree branches around 3 meter from over head conductor with necessary tools and ladders completed all as specified and directed

M&L for Painting of steel pole (swan neck type or straight type) up to 9 mtr height with cross arms, clamp of any length and shape for LT overhead line/ for street light with two coat of aluminium paint after scratching out old paint, cleaning and exiting surface rust free, preparation of the existing surface, including marking pole numbers in a 15 cm dia yellow circle with number writing with black synthetic paint/ Stricker, including painting strips in alternate from bottom to top with three strips of white synthetic paint & two strips of Yellow/ black paint (as per existing pattern through out the circumference of pole, including removing extra wall papdi ,peel off wall papdi by sand paper and making good with putty as per existing thickness and applying one coat of white washing on PCC copping of pole complete all as specified and directed

M&L for Painting to the LT/HT PCC poles with strips in alternate from bottom to top with three strips of white synthetic paint & two strips of yellow/ black paint (as per existing pattern) throughout the circumference of pole including one coat of lime wash on PCC copping of pole, two coat of aluminium paint to channels, cross arm, clamps and pipes fixed/ mounted on pole after scratching out old paint, cleaning complete all as specified and directed

S&F in replacement pre-stressed cement concrete pole, 9 metre long of cross section 102 mm x 172 mm at top and 102 mm x 279 mm at bottom, class 10, complying with requirements of IS-1678-1998 errecting truly in vertical position including painting of poles with two coats of synthetic enamel paint over a coat of primer in alternate strip of 30cm each in black and white colour upto 1.5 metre height from top of PCC pedestal/coping of poles complete all as specified and directed

Restreching existing LT/HT over head lines consisting following lines of ACSR and GI wire any size of 4/5 lines of ACSR conductor and tightening with aluminium binding wire of suitable size complete all as specified and directed.

S&F in replacement aluminium conductor, steel reinforced (ACSR) of any size, any type as per existing one and stringing properly on the insulators and binding with aluminium wire, connectors, jumpers etc complete all as specified and directed.

M&L in replacement of shackle type porcelain, vitreous brown insulator in repair including one galvanised MS strap of size 31x3 mm, 12mm dulia insulator bolts washers and nut for 1100 Volts grade 75mm in height and 90mm dia including dismantling of unserviceable LT insulators pin/ shackle/ disc & loop type from existing OH lines complete all as specified and directed.

Detection/finding out the exact LT fault location from both end terminations of underground cable by necessary excavation/earth work or by fault locator machine and making it serviceable and making good the surface as per existing at site complete all as specified and directed

M&L for heat shrinkable type straight through joint outdoor type for LT UG cable 10 to 16 sqmm 4 core including excavation and earth work in any type of soil/ hard standing floor complete all as specified and directed

M&L for PCC (1:3:6) type C-2 using 40mm graded stone aggregate as in foundation for stays & mass concrete including necessary form work and fair finishing complete all as specified and directed by Engineer-in-charge

M&L for PCC (1:2:4) type B-1 using 20 mm graded stone aggregate as in coping of poles etc including weathering, slightly rounded or chamfered angle and throating, necessary form work and fair finishing all exposed faces of concrete without using extra cement complete all as specified and directed by Engineer-in-charge

Supply, install, testing & commissioning of CPRI approved LT panel board, outdoor type, floor mounted, factory made suitable for 415 volt, 3 PH, 4 wire , 50 HZ , AC supply system. The panel shall be factory made, double door outdoor type made out of 2.0 mm thick MS sheet totally enclosed dust, vermin & rust proof front operated, front & rear opening with locking arrangement fixed with MS angle iron frame of size 50X50X6 mm and duly painted with two coats of synthetic enamel paint over a coat of red oxide primer with colour as directed including internal wiring with multi-stranded copper conductor cable of suitable size incl lugs and cable gland to incoming and outgoing cable etc including taking down old unserviceable panel all as directed at site and comprising of the following:- (i) TPN 40 Amp - 01 No (ii) Timer switch for flood lights- 01 No (iii) Contactor 16 Amp 3 Pole- 03 No (iv) Rising and lowering push button with control wiring- 02 Nos

S&F LED garden light (Bollard type) light fitting luminaries of 9/10 watt in round shape with 0.75 mtr height of 3000K with IP 65, PF> 0.90 completed with all accessories including necessary excavation, PCC, connections with twin core aluminium cable 1.5 Sqmm complete all as specified and directed

Surface dressing not exceeding 15 cm deep in soft/loose soil including cleaning of E&M installation premises, uprooting of tiny trees, tree cutting , cleaning , leveling , spreading bushes, beeds, grass and removing poly bags, brick bats, stone rebels debris , Cleaning of substation bldg , two pole / four pole structure area , HT line etc complete all as specified and directed by Engineer-in-Charge

M&L in replacement of existing rusted danger notice board with pressed vitreous painted plate fabricated out of 1.6 mm thick mild steel sheet vitreous enamelled white with letters figures and conventional skull and bones in signal red colour and fixed with MS clamp bolts and nuts of approved size 20x15 cm size complete all as specified and directed

M&L for stay assembly complete comprising of stay cable, stay bow 40 cm long, 14mm dia complete with accessories as shown in electrical plate No - 1 of SSR 2009 Part - 1 (on page 495), with and incl 20 mm dia, 1.8 mtr long galvanised stay rod with threaded ends, GI nuts, bolts, washers, thimbles with and incl 300mmx300mmx6mm stay plate, with and incl dismantling of existing damaged assembly, complete all as specified and directed by Engr-in-Charge. Note : The stay clamps, stay strand wire, PCC, excavation and earth work shall be measured and paid for separately

M&L for earthing complete with galvanised mild steel earth plate electrode 600x600x6.0mm thick, burried directly in ground to a depth not less than 2.25 metres deep below ground level with top edge of earth plate not less than 1.5 metre below normal ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around the plate, using GI wire 4 mm dia as earth electrode bolted or riveted to earth plate at one end and connected to equipments at another end, 20 dia bore GI pipe 'light grade' as water pipe from earth chamber to upper edge of earth plate, test point , GI funnel with wire mesh fixed on water pipe and PCC 1:2:4 type B-1 as in pit chamber and RCC pit cover 50mm thick precast RCC 1:2:4 type B-1 excavation, earth work complete all as specified and directed

Supply only LT self adhesive PVC electrical insulation tape of size width 25 mm and 25 mtr long complete all as specified and directed.

Attending the complaints of timer panel including timer and contactor of LED street light/high mast light fitting with checking loose connection or wiring and setting the time of timer in panel and making it serviceable complete all as specified and directed.

NAV DURGA CONSTRUCTION CO (BID ID -3487398)

M/S BSS AND SONS (BID ID -3492714)