REPAIR TO JOINERY WORK AND OTHER ASSOCIATED WORK IN MD ACCN UNDER AOR OF AGE B/R-V OF GE (N) BATHINDA AT BATHINDA MIL STN

Amount

SCHEDULE 'A' B/R Works

Taking down chowkhats or frame with shutter (without taking off shutters from the frames) not exceeding 1.5 Sqm each and removal from site including cutting holes for removal of old rusted hold fast and prepare the surface for new hold fast complete all as specified and as directed by Engineer-in- charge.

Taking down chowkhats or frames with shutters (without taking off shutters from the frame) exc 1.5 sqm but not exc 4 Sqm each and and removal from site including cutting holes for removal of old rusted hold fast and prepare the surface for new hold fast complete all as specified and as directed by Engineer-in- charge.

Taking down shutters only of any description area not exceeding 1.0 sqm each complete all as specified and as directed by Engineer-in- charge.

Taking down shutters only of any description area exceeding 1.0 sqm and not exceeding 2.0 sqm each complete all as specified and as directed by Engineer-in- charge.

Taking down wooden shutters only of any description area exceeding 1.0 sqm and not exceeding 2.0 sqm each and refixing in same opening after necessary easing, adjustments, minor repairs, oiling, adjustment with cutting of fixing plain fillets/planks made from second class hard wood etc to remove gap between floor and shutter complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing Pressed steel frames with thickness of steel sheet 1.25mm for doors with one or more rebates including hinges, lock strike plate, fixing lugs, etc., size of frame 105mm x 60mm including one shop coat of priming complete all as specified and as directed by Engineer-in-charge. Note:- The quoted rate deemed to include the cost of making good the disturbed surface with cement plaster 1:6 and matching the colour of new plaster with existing surface. Nothing extra shall be paid on this account.

Supply and fixing Pressed steel frames with thickness of steel sheet 1.25mm for doors with one or more rebates including hinges, lock strike plate, fixing lugs, etc., size of frame 125mm x 60mm including one shop coat of priming complete all as specified and as directed by Engineer-in-charge. Note:- The quoted rate deemed to include the cost of making good the disturbed surface with cement plaster 1:6 and matching the colour of new plaster with existing surface. Nothing extra shall be paid on this account.

Material and Labour for PCC (1:3:6) type C-1 using 20 mm graded crushed stone aggregate as in back filling of pressed steel chowkhats single or double rebated or for fixing hold fasts etc complete all as specified and as directed by Engineer-in-charge.

Supply & fixing factory made plain framed panelled shutters (two panels as approved), 35mm thick of 2nd class hard wood with lock rail and panel inserts of 12mm veneered particle board with commercial veneering on both faces. The size of rails and styles as per IS-1003 (Part-I), kiln seasoned as per IS-1141 and chemically pressure treated as per IS-401, including 2nd class soft wood kail beading 20mm wide tapering from 10mm to 5mm on one side and also fitted to chowkhat complete all as specified and as directed by Engineer-in- charge. Note : - (i) The sutters shall be brought at site without primer and same shall be applying at site as per direction of Engineer-in-charge. Primer shall be measured paid separately under appropriate item (painting) of BOQ.

Supply and Fixing 35mm thick, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars), using 2nd class hard wood (Bonsum/ Hollock) edges of frming plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc , sizes of members of shutters as specified in SSR Part-I, Section8, Clause 8.24 (a), supplied and fitted to chowkhats complete all as specified and as directed by Engineer-in-Charge. Note:- Wire gauze/ glass to be measured and paid separately.

Supply and Fixing Stainless steel wire cloth, 0.56 mm nominal dia of wire & average width of aperture 1.18mm and fixed with tinned tacked or galvanized steel wire staples complete all as specified and as directed by Engineer-in- charge.

Supply and Fixing in repairs mild steel galvanized wire cloth, 0.56 mm nominal dia of wire & average width of aperture 1.18mm and fixed with galvanized steel wire staples complete all as specified and as directed by Engineer-in- charge.

Supply and fixing mild steel barrel tower bolts, 200 mm long, stove enamelled black with bright bolts and fixed complete all as specified and as directed by Engineer-in-charge.

Supply and fixing mild steel sliding door bolts with hasp and staple, length of bolt 300mm, plate type, stove enameled black, with bright bolts not less than 12 mm dia with and including a minimum of 6 bolts and nuts, 4 on bolt plate and 2 on staple plate and fixed, complete all as specified and as directed by Engineer-in-charge.

Supply and Fixing mild steel ordinary rat rail rod pattern springs of 300 mm length including roller & roller plate fixed to wooden/metal frames complete all as specified and directed by Engineer-in-charge.

Supply and Fixing in repair mild steel ordinary rat rail rod pattern springs of 300 mm length including roller & roller plate fixed to wooden/metal frames complete all as specified and directed by Engineer-in-charge.

Supply & fixing 150mm long Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, complete all as specified and directed by Engineer-in-Charge.

Supply & fixing in repair 150mm long Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, complete all as specified and directed by Engineer-in-Charge.

Supply and fixing mild steel pressed handles, 150 mm long, oval type, stove enamelled black complete all as specified and as directed by Engineer-in-charge.

Supply and fixing Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing, fixed in opening using MS screw 75mm long with PVC fastener including making good disturbed wall surfaces (brick, plastering, tiles and painting work as per existing) complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing aluminium anodised barrel tower bolt of extruded section, 150mm long complete all as specified & directed by Engineer-in-charge.

Supply and fixing in repairs 100 mm long Butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and as directed by Engineer-in- charge.

Supply & fixing 150mm long, Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed by Engineer-in- charge.

Supply & fixing, factory made steel window confirming to IS 1038 with side hung shutters including projecting type hinges, with steel handle, steel peg stay, complete, dovetailed welded, with one shop coat of zinc chromate primer with glazing bars including fixing of lugs in PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) including cutting holes for removal of old rusted hold fast and prepare the surface for new hold fast and making good disturbed area of walls and cills to match the existing surfces by bricks / plastering works and painting work etc complete all as specified & as directed by Engineer-in- charge.

Supply & fixing, factory made steel window confirming to IS 1038 with side hung shutters including projecting type hinges, with steel handle, steel peg stay, complete, dovetailed welded, with one shop coat of zinc chromate primer without glazing bars including fixing of lugs in PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) including cutting holes for removal of old rusted hold fast and prepare the surface for new hold fast and making good disturbed area of walls and cills to match the existing surfces by bricks / plastering works and painting work etc complete all as specified & as directed by Engineer-in- charge.

Supply & fixing, factory made steel ventilators all as per IS 1038/83, with top hung shutters including hinges, suitable steel handle, steel peg stay,with one shop coat of zinc chromate primer fixing lugs in PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) including cutting holes for removal of old rusted hold fast and prepare the surface for new hold fast and making good disturbed area of walls and cills to match the existing surfces by bricks/plastering works and painting work etc complete all as specified & as directed by Engineer-in- charge.

Taking down cement or cement lime plaster of any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etccomplete all as specified and as directed by Engineer-in-charge.

Material and Labour for rendering 15 mm thick in cement mortar (1:6) on other than fair face of brick work or concrete surfaces of walls and finishing the surface even & smooth without using extra cement complete all as specified and as directed by Engineer-in- charge.

Material and labour for newly plastered of walls applying two coats of oil bound distemper (washable) over a coat of alkali resistant priming paint on plastered surfaces complete all as specified and as directed by Engineer-in-Charge.

Material and labour for preparation of new plastered surfaces of walls/pillars /cornices by brooming down with using broom/sand papering or by any other mean, washing down with water and applying two coats of cement base paint as per approved tint/colour by using paint brush complete all as specified and as directed by Engineer-in-Charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding and rubbish off the premises complete all as specified and as directed by Engineer-in- charge.

Material and labour for Glazed ceramic coloured tiles of size 300mmx 200mm / 450mmX 300mm, 7mm to 8mm thick, as in vertical surface set and jointed in neat cement slurry @ 3.00 Kg/ Per Sqm and pointed in white or coloured cement to match the shade of tile including necessary cutting as per site requirement, tiles laid over and including 10 mm thick rendering in cement mortar (1:4) complete all as specified and as directed by Engineer-in-Charge.

Material and labour for Non Skid ceramic coloured tiles 7 to 8 mm thick square or rectangular area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in floor, set and jointed in neat cement slurry @ 3.00 Kg/ Per Sqm and pointed in white or coloured cement to match the shade of tile including necessary cutting as per site requirement, tiles laid over and including 15 mm thick bedding layer (screed) in cement mortar (1:6) complete all as specified and directed by Engineer-in-Charge.

Material and labour for vitrified ceramic coloured tiles (dark shade) 10 mm thick square or rectangular area of each tile not exceeding 0.36 sqm, as in floor, set and jointed in neat cement slurry @ 3.00 Kg/ Per Sqm and pointed in white or coloured cement to match the shade of tile including necessary cutting as per site requirement, tiles laid over and including 15 mm thick bedding layer (screed) in cement mortar (1:6) complete all as specified and directed by Engineer-in-Charge.

Supply and fixing flush shutter 30mm thick solid core construction with block board core and plywood face panel commercial type on both sides chemically treated against termite against termite infestation complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 100 mm long Butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and as directed by Engineer-in- charge.

Supply and fixing in repair aluminium anodised hasp and staples, 100 mm long (ISI marked) complete all as specified and as directed by Engineer-in-charge.

Supply and fixing drawer pulls, 3 screw plate with fixed dished pull 80 to 100 mm long cast iron or mild steel complete all as specified and as directed by Engineer-in-charge.

Supply and fixing 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finshed complete all as specified and as directed by Engineer-in-charge.

Material and Labour for preparing new or previously untreated steel and iron surfaces of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint complete all as specified and as directed by Engineer-in- charge.

Material and Labour for preparing new or previously untreated wood and wood base surfaces of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed by Engineer-in- charge.

Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips, oil putty complete all as specified & directed by Engineer-in- charge.

Supply & fixing and cutting as per size requirement 3mm thick sheet glass ordinary quality and glazing with oil putty in squares/retangular not exceeding 0.5sqm in each pane and fixed in any type of doors / windows / ventilators (openable/fixed type) with fixing material complete all as specified & directed by Engineer-in- charge.

Supply & fixing and cutting as per size requirement 3mm thick figured glass pin head type and glazing with oil putty in squares/retangular not exceeding 0.5sqm in each pane and fixed in any type of doors / windows / ventilators (openable/fixed type) with fixing material complete all as specified & directed by Engineer-in- charge.

Supply and fixing Powder coated aluminium (minimum thickness of powder coating 50 micorn) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc., minimum thickness of powder coating 50 micron drawing and size as approved by GE complete all as specified and directed by Engineer-in-charge . Note :- Weight of aluminium section/aluminium channel shall be physically ascertained through a board of officers convened by Accepting officer and payment shall be made only after ascertaining the actual weight of aluminium at site.

Supply and fixing powder coated Anodised aluminium with minimum thickness of powder coating 50 micorn window and ventilator shutter, glazed side/top hung type without sash bars, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, luminum snap beading screws, screws, anodised aluminium fittings such as peg stay 150mm long (1 No), hinges type B-21 100mm long ( 2 Nos), suitable size handle ( 1No) drawing and size as approved by GE complete all as specified and directed by Engineer-in-charge .

Supply and Fixing factory made anodised aluminium door shutters, aluminium sections weighing not less than 0.55 kg/metre including necessary joining cleats, glazing clips, rubber neoprene packing, handle 2 Nos in each door, hinges, anodised aluminium snap beading, screws etc drawing and size as approved by GE complete all as specified and as directed by Engineer-in- charge.

Supply and fixing 4 mm thick tinted glass exceeding 0.50 Sqm in each pane complete all as specified and as directed by Engineer-in-charge.

Supply & fixing aluminium (Die cast) body door closer hydraulically regulated, designation No 3, universal type suitable for door shutter of 851 to 1000mm in width and weight between 61 to 80 Kg, ISI marked complete all as specified & directed by Engineer-in-charge.

Supply and fixing in repair mild steel mortice lock, vertical type, size 100mm complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repairs MS steel window handles Right & Left as per specified by Engineer-in-charge.

Supply and Fixing in repair 25mm dia fancy type PVC coated in wooden finish on MS pipe coloured curtain rod with brackets and knobs at both ends with necessary fittings etc complete all as specified and as directed by Engineer-in- charge. (Note :- Brackets and Knob required as per site requirement is deemed to be included in the quoted rate. Nothing extra shall be paid on this account )

supply and fixing in repair / replacement 18/19 mm thick particle board, medium density, flat pressed, single layer type or three layer type with BWR type adhesive, fixed with screws to timber frame workin cubbd shelves etc including and made to shape as required including all fittings/accessories and taking out unserviceable board any type complete all as specified and as directed by Engineer-in-Charge.

Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed by Engineer-in-Charge.

Supply & fixing for Framed work such as grills, gratings, etc. with ends of bars shouldered and or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe 290 Gde-E-165 complete all as specified and as directed by Engineer-in- charge.

Material and labour for granite (of any type) work 20 mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including Material and labour for 15 mm thick screed in cement mortar (1:4) and finish the surface rough to receive the tile complete all as specified and as directed by Engineer-in-Charge. Note:- Sample of granite for Shade and type shall be approved by GE before procurement.

Material and Labour Plain fillets, square, rectangular or triangular in section, clean sawn, secured with nails or brads of 2nd class soft wood area exceeding 3 sqcm and not execcing 6 sqcm complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 30mm Continuous (piano) hinges, mild steel, bright finish or electro galvanised complete all as specified and directed by Engineer-in-Charge.

Material and labour in repair 19-20 mm thick PVC board (for cupboard and kitchen cabinets) one side decorative choice lamination and other side balancing white lamination fixed with screws to timber frame work complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repairs stainless steel modular litchen basket accessories cabinets multipurpose utensils drawer basket wired of different sizes, complete all as specified and directed by Engineer-in-Charge.

K L JINDAL AND CO.

Singla Enterprises

FAIR DEAL CONSTRUCTION CO

M/s MITTAL CONSTRUCTIONS

G N CONSTRUCTIONS

M/s GURFATEH BUILDERS

M/S GOYAL BUILDERS

SHARDA ENTERPRIES

M/S SAI BUILDERS