Loading
Loading…
Loading…
Tender ID
| # | Company | Status |
|---|---|---|
| 1 | Accepted-Technical NOT SPECIFIED | NEW DELHI | DELHI | 110001 | Accepted-Technical Substaintally Responsive |
| 2 | Accepted-Technical | Accepted-Technical Substaintally Responsive |
| 3 | Accepted-Technical 189 G T B NAGAR CHAKIA ALLAHABAD UTTAR PRADESH 211016 UDYAM UP 03 0037956 | PRAYAGRAJ | UTTAR PRADESH | 211016 | Accepted-Technical Substaintally Responsive |
Tender Value
₹15.0 L
EMD Value
₹1.5 L
Closing Date
24 Apr 2026, 12:00 pmClosed
SE
E/M Circle Pwd, Gorakhpur
Yuva Kalyan Vibhaag ke antargat sanchalit janpad gorakhpur ke mini gramin stadium sahjanwa evam bhrampur mein ek ek high mast light 25 metre uchaayi ka adhishthapan karya
2026_CEEMP_1134467_1
570/Nivida Suchna GKP-Zone-E/M Circle/2025-26 Dt 25.03.2026
Open Tender
Electrical Works
Percentage
90 days
Gorakhpur
Please refer Tender documents.
3 documents required · 3 mandatory
₹766
Executive Engineer, E/M Division Pwd, Gorakhpur
₹1.5 L
Executive Engineer, E/M Division Pwd, Gorakhpur
30 Apr 2026
8 Apr 2026
24 Apr 2026
8 Apr 2026
24 Apr 2026
8 Apr 2026
15 Apr 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Supply and fixing of 25 Mtr High Mast pole of approved make with rising system dip galvanized inside and outside dip. having pole sheet thickness 4 mm. top dia minimum 150 mm and bottom dia minimum 460 mm & base plate 32 mm thick) suitable for wind velocity as per IS 875 part 3 & having no circumferential weld, with accessories for high mast such as head frame suitable for 8 to 12 luminaries & its control gear boxes 1.5 H.P. power tool motor, 3 point suspension system with steel wire rope 8 mm dia, double drum winch. including making suitable foundation as per manufacturer drawing/ site requirement along with foundation bolts, nuts, washers, anchor plates etc complete in all respect. SOR 21.3.3 | 2 | Nos. | - | - |
| - | Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade on 750 mm below the ground. (i) 16sq.mm 4 core SOR 20.1/20.1.9 | 460 | Mtr. | - | - |
| - | Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required 4 X 6 sq. mm + 2 X 6 sq. mm earth wire DSR 1.14.9 | 4 | Mtr. | - | - |
| - | Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required 4 X 10 sq. mm + 2 X 6 sq. mm earth wire DSR 1.14.10 | 20 | Mtr. | - | - |
| - | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in Existing surface/ recessed medium class PVC/Steel conduit as required. 3X 2.5sq.mm DSR 1.17.12 | - | Mtr. | - | - |
| 6 | Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB /Isolator). 4 way (4 + 12), Double door DSR 2.4.1 | 2 | Nos. | - | - |
| 7 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of Single pole in the existing MCB DB complete with connections, testing and commissioning etc. as required. DSR 2.10.1 | 24 | Nos. | - | - |
| 8 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of Triple pole and neutral in the existing MCB DB complete with connections, testing and commissioning etc. as required. DSR 2.10.5 | 4 | Nos. | - | - |
| - | Supplying, Installation, Testing & Commissioning
of 200 Watt Flood Light, (System lumen efficacy ≥120 and <135 lm/Watt). powder coated pressure die cast aluminium body with built in or separate driver as per the requirement with Driver efficiency >85%, Input voltage: Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -5 0C to 50 0C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5. with 5 Year OEM warranty. DSR 8.16.5 | - | Nos. | - | - |
| - | Earthing with G.I. earth Pipe 4.5 Meter Long 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. DSR 5.2 | 4 | Nos. | - | - |
stage.html
html • 0.02 MB
tech_bid_open.pdf
tech_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.75 MB
Tendernotice_2.pdf
PDF • 1.06 MB
Tendernotice_3.pdf
PDF • 2.70 MB
BOQ_2117916.xls
BOQ • 0.43 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .