PROVN OF TOILET BLOCK BEHIND BLDG NO P-34, PROVN OF TOILET BLOCK NEAR BLDG NO P-35A AND CERTAIN LBW AND SPECIAL REPAIR WORKS UNDER GE KAMPTEE.

Amount

Surface excavation in soft/loose soil not exc 30cm deep and averaging 15cm deep and getting out etc complete all as specified and directed.

Excavation in trenches not exc 1.5m in deepth and 1.5m in width and getting out in soft/loose soil complete all as specified and directed.

Excavation in trenches exc 1.5m in deepth and 3.00m in width and getting out in soft/loose soil complete all as specified and directed.

M&L for providing cement concrete 1:4:8 type D2 (Using 40mm graded stone aggregate) as in foundation, mass concrete and filiings complete all as specified and directed.

M&L for cement concrete 1:3:6 type C2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed.

Demolition of RCC in suspended work and disposal of unserviceable materials, debris and rubbish to a distance not exceeding 100m complete all as specified and directed.

M&L for form work to sides of concrete in foundations, footing base, base of columns, side and soffits of plinth beam and similar work complete all as specified and directed.

M&L for providing reinforcement cement concrete M-25 (Design Mix) as in footing, foundation, beams, plinth beams, base for columns and mass concrete etc complete all as specified and directed.

M&L for form work to sides of columns and similar work complete all as specified and directed.

M&L for providing reinforcement cement concrete M-25 (Design Mix) as in columns and pillars etc complete all as specified and directed.

M&L for form work to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, and similar work complete all as specified and directed.

M&L for providing reinforcement cement concrete 1:1 ½ : 3 type A-1 (using 20mm graded stone aggregate) as in beams, cantilevers, bressummers, lintels over 1.5m span concrete etc complete all as specified and directed.

M&L for form work to chullah hoods, chajjas, troughs and similar items including edges and similar work complete all as specified and directed.

M&L for providing reinforcement cement concrete 1:1 ½ : 3 type A-1 (using 20mm graded stone aggregate) as in chajja etc complete all as specified and directed.

M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.

M&L for formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs not exc 20cm wide complete all as specified and directed.

M&L for providing reinforcement cement concrete 1:1 ½ : 3 type A-1 (using 20mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending and binding with mild steel (anneal) wire not less than 0.90mm dia complete all as specified and directed.

M&L for mild steel TMT bars 8mm dia in spacers, cut to length, bent to shape required, including cranking, bending and binding with mild steel (anneal) wire not less than 0.90mm dia complete all as specified and directed.

M&L for mild steel TMT bars 8 to 10mm dia as in stirrups, spacers and binders complete all as specified and directed.

S&F bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required, hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed.

Demolition of brick work, built in cement mortar or cement lime mortar including all quoins, pillars etc. and disposal of unserviceable materials, debris and rubbish to a distance not exceeding 50m complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for brick with fly ash brick old size straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and as directed.

All as per item No 24 above but half brick wall in CM 1:4 complete all as specified and directed.

M&L for brickwork with fly ash bricks in one brick thick honeycomb walling, built in cement mortar (1:4) complete all as specified and directed.

M&L for 40mm thick damp proof course to horizontal or vertical surfaces including necessary formwork in 1:2:4 type B-0 complete all as specified and directed.

M&L for loose filling with aggregate of gauge 80 to 150mm of broken bricks complete all as specified and directed.

Taking down cement plaster on brick or stone surfaces, etc., including raking out joints, hacking for key, scrubbing down with water, etc including removal of rubbish off the premises, complete all as specified and as directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces with CM 1:6 finished even and smooth withot using extra cement complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces with CM 1:4 mixed with WPC finished even and smooth without using extra cement complete all as specified and directed. Note:- WPC will be measured & paid separately.

Supply only liquid water proofing compound of approved quality complete all as specified and directed.

M&L for rendering 10mm thick on surfaces of ceiling in cement mortar (1:3) and finished even and smooth without using extra cement complete all as specified and as directed.

M&L for preparation of new undecorated plastered surfaces of wall and applying three coats of white wash etc complete all as specified and as directed.

All as per item No 34 above but in ceiling complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

M&L for moorum/red bajri filling in floors or pavings, laid in layers not exc 15cm thick, spread, levelled and rammed including watering complete all as specified and directed.

M&L for hardcore of gauge noty exc. 63mm deposited, spread and levelled in layers not exc 15cm thick watered and rammed to a true surface for plinth protection/ path complete all as specified and directed.

M&L for 75 mm thick cement concrete 1:4:8 type D2 (using 40mm graded stone aggregate) as in sub base to floors finished even complete all as specified and directed.

M&L for providing 25mm thick cement concrete 1:2:4 type B1 (Using 20mm graded stone aggregate), as in sub base in floor/ paving etc complete all as specified and directed.

M&L for joint free coloured non skid ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding. 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed with white or coloured cement to match over and including 15mm thick screed bed of cement mortar (1:6) etc complete all as specified and as directed.

M&L for coloured glazed ceramic tiles 300x450x6 to 7mm thick, in floors etc set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles including rendering 10mm thick in CM 1:4 complete all as specified and directed.

M&L for 100mm thick plain cement concrete type B-1 (1:2:4) (Using 20mm graded stone aggregate) as in floor/ hard standing etc, finished even and smooth without using extra cement etc complete all as specified and as directed.

M&L for 50mm thick PCC 1:2:4 type B1 (using 20mm graded stone aggregate) for floor complete all as specified and directed.

M&L for 75mm thick cement concrete type C-2, 1:3:6 (using 40mm graded stone aggregate) finishing cement concrete surface even and smooth without using extra cement as in plinth protection complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25cm in hard/ dense soil complete all as specified and directed.

Removing excavated material (soil) not exc 50m and deposited where directed at a level not exc 1.5m above the starting point complete all as specified and directed.

M&L for PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in cills, steps, seismic and other similar bands, plinth courses, lacing courses parapets and railing upto 60cm height, copings, kneelers, bed plates, hold fasts block, filling on pressed steel door frame etc complete all as specified and as directed.

M&L for cement concrete 1:2:4 type B1 (using 20mm graded stone aggragate) as in surface channels and drains complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube and fixing in opening complete all as specified and directed.

S&F factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 4mm thick moulded laminated PVC Sheet on the front face & 4mm plain colour PVC sheet on back face, with wood free EPS supplying & fixing in frame at site as per specification & drawing complete all as specified and directed.

S&F 100mm long medium weight cold rolled mild steel butt hinges complete all as specified and directed.

S&F extruded aluminium alloy handles, fabricated type anodised of 125mm long complete all as specified and directed.

S&F aluminium anodised barrel tower bolts of extruded section and fixed of 100mm long complete all as specified and directed.

S&F 250mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

M&L for steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.

All as per item No 56 above, but without glazing bars complete all as specified and directed.

M&L for 4.0 mm thick frosted sheet glass ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each panes complete all as specified and directed.

S&F 3mm thick sheet glass ordinary quality not exc 0.50 sqm each pane and fixed with oil putty or with wooden beading in square etc complete all as specified and directed.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanised wire staples complete all as specified and as directed.

M&L for preparation of new steel surface and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for preparation of new steel surface and applying two coats of synthetic enamel paint complete all as specified and directed.

S&F towel rail 20mm dia of chromium plated fixed with and including chromium plated brass screws and wooden/ plastic cleats complete all as specified and directed.

S&F vitreous china wash down water closet (pedestal pattern) 'P' or 'S' trap including jointing including plastic water closet seat, closed pattern with flat bottom and cover and mild steel CP or aluminimised hinging device complete all as specified and directed.

S&F vitreous china white squatting pan "Orissa Pattern" of size 580x440mm, with integrated foot rest (excluding flushing cistern, flush pipe etc) including making good to floor complete all as specified and directed.

S&F PVC valveless, syphonic action type flushing cistern, 10 ltr capacity, low level white with inlet ball valve, float and handle including bracket complete all as specified and directed.

S&F flushing pipe of polyethylene of low or high density or PVC, 32mm dia, for low level cistern complete all as specified and directed.

S&F vitreous china urinals, half stall type, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe complete all as specified and directed.

S&F 15mm bore CP urinal spreader for urinals complete all as specified and directed.

S&F vitreous china wash basin of size 550x400mm including cutting for and pinning in ends of brackets or erecting stand complete all as specified and directed.

S&F PVC connection 15mm size, 450mm long with PTMT nuts both side complete all as specified and directed.

S&F waste fittings, brass chromium plated for glazed ware sink, basins, etc with long screwed shanks and fly-nuts, flanged end bedded in red lead cement and other end fixed complete all as specified and directed.

S&F rotational moulded polyethylene water storage tank of 1000 ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed.

S&F ball brass valve high pressure with polythene float and fly nut complete screwed for iron pipe of size 20mm dia complete all as specified and directed.

S&F bib taps fancy type chromium plated, with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule and fixed of 15mm bore size complete all as specified and directed.

S&F pillar cock fancy type cast copper alloy, chromium plated 15mm dia of bore complete all as specified and directed.

S&F stop cock / angle cock, fancy type, chromium plated, screwed down, high presure with crutch or butterfly handle screwed both ends for iron pipe of 15mm bore pipe complete all as specified and directed.

S&F 15mm GI tubing 'Medium grade' with all fitting and fixed complete to wall and ceiling or laid in floor complete all as specified and directed.

S&F 20mm GI tubing 'Medium grade' with all fitting and fixed complete to wall and ceiling or laid in floor complete all as specified and directed.

S&F 100mm dia cast iron soil, waste and vent sand cast pipes in any length with or without ears, with cement joints, laid in trenches or in floors complete all as specified and directed.

M&L for providing concrete bed to 100mm dia drain pipe for including packing under and hauching against the sudes of pipes after they are laid and tested, in cement concrete 1:3:6 type C1 (Using 20mm graded stone aggregate) complete all as specified and directed.

S&F 100mm dia cast iron soil, bends (any radius), diminishing or tapers (larger bore measured) complete all as specified and directed.

S&F 75mm dia cast iron soil, waste and vent sand cast pipes in any length with or without ears, with cement joints, but fixed in walls complete all as specified and directed.

S&F 75mm dia cast iron cowls complete all as specified and directed.

S&F PVC (SWR) pipes of 75mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F PVC (SWR) floor trap, plain with grating including jointing with solvent cement of 75mm dia complete all as specified and directed.

S&F CP grating of size 100mm dia complete all as specified and directed.

S&F cast iron cowl slotted vent cowl 100mm size complete all as specified and directed.

M&L for providing cement concrete 1:2:4 type B2 (Using 40mm graded stone aggregate) as in foundation, mass concrete and fillings complete all as specified and directed.

M&L for precast reinforced cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as in landings, cover slabs (for manholes etc.) chullah hoods, chajjas, mangers, shelves and similar articles with plain faces and set in CM 1:6 (reinforcement measured and paid separately) complete all as specified and directed.

Demolition and breaking up drain pipes of any type (SGSW/ AC or reinforced concrete pipe) set in cement mortar of dia 150mm complete all as specified and directed.

M&L for laying 150mm dia salt glazed stone ware drain pipes of grade ‘A’ and jointed in cement mortar and tested on completion all as specified and as directed.

M&L for concrete bed to drain pipe including packing under and haunching against the side of pipe after they are laid and tested of 150mm bore complete all as specified and directed.

Cleaning of sludge/soil etc accumulated in existing drain and thrown away the spoil in low lying area exc 50m upto a distance of 250m complete all as specified and directed.

M&L for cutting holes in brick walls built in cement mortar or cement lime mortar and stone walls built in lime mortar exc half brick but not exc one brick inserting hold fasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B1 as required complete all as specified and directed.

S&F angle iron frame work for placing desert cooler including flat iron and all necessary drilling, welding, bolting or riveting, embeding in concrete etc. and similar work and fixing to the required location and position inclduing shape and size conforming to Fe-290 Gde E-165 complete all as specified and directed.

Cutting openings, through brick walls for door, window and other openings or enlarging existing openings. converting window into door openings, etc or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hardcore, etc to store and rubbish not exc. 50mtr complete all as specified and directed.

Forming jambs, etc to openings (to foregoing item), including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work, complete all as specified and directed.

S&F post and struts including cutting tops to shape as directed, drilling holes notching for wire, etc flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc.and similar work complete all as specified and directed.

S&F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS1161-1979 grade St.-240 cleat etc complete all as specified and directed.

S&F plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment etc complete all as specified and directed.

S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall/ ridge/ valley gutter, fixed with self tapping screws complete all as specified and directed.

M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed base 20mm thick in CM 1:6 laid and jointed wih grey cement slurry mixed with pigments to match the shade of the slab including rubbing and polishing complete all as specified and directed.

S&F 50mm stainless steel tube of 14 gauge thickness as in baluster and handrails complete all as specified and directed.

S&F 25mm stainless steel tube of 14 gauge thickness as in handrails for small horizontal bars complete all as specified and directed.

Supply only stainless steel three seater chairs for waiting area, as approved by GE complete all as specified and directed.

M&L for point wiring 1100 volt grade single core FRLSH PVC insulated and unsheathed cable with multistranded copper conductor 1.50 sqmm drawn in and including electrical grade PVC conduit not less than 20mm dia with IS 9537 (Part-III) 1983 marked medium grade concealed in surface of wall/ ceiling including FRLSH PVC insulated unsheathed earth wire with multistranded copper conductor of size 1.50 sqmm pressed steel modular boxes sunk on wall for mounting of modular switches, switch sockets, fan regulator etc including modular cover with frame any size complete all as specified and making good disturbed surfaces for one light point controlled by one, one way switch. Note:- Cost of cable provided from sub main DB to respective switch board in rooms shall be included in the quoted point wiring rate. All switches, fan, sockets, ceiling roses and holders shall be connected to common earth dolly.

As per item No 109 above but one ceiling /exhaust fan point controlled by one switch and regulator complete all as specified and directed.

As per item No 109 above but one 3 pin 5 amp socket out point on the same board with other switches complete all as specified and directed.

As per item No 109 above but one 3 pin 5 amps socket out let point on independent board complete all as specified and directed.

M&L for sub main wiring with two single core PVC FR LSH insulated unsheathed stranded copper conductor and earth wire 1100 volt grade and drawing into PVC conduit not less than 20mm medium grade concealed in wall of size 2x 2.5 Sqmm with earth wire of 1x2.5 Sqmm complete all as specified and directed. Note :- Accessories for point/sub main wiring like PVC junction box, bend, Tee, elbow shall be of same make.

S&F ceiling rose surface type 2/3 terminal, 5 amps complete all as specified and directed.

S&F modular switch one way 6A, 1 module complete all as specified and directed.

S&F modular socket 6A, 2/3 pin combined, 2 module complete all as specified and directed.

S&F modular fan step regulator, 120 watt 2 module complete all as specified and directed.

S&F highly durable surface mounted 18/20 watts LED batten/surface constructed of fire retardant engineering grade extruded aluminium and decorative end cap complete with tube rod,driver including 3 core 1.0 sqmm copper conductor cable, 240V, 50Hz, 2000lumen, 100 lumen per watt for connection and accessories complete all as specified and directed. Make:- CG Cat part No LDL-20-CDL or equivalent in Philips/ Luker.

S&F light fitting 9W bulk head luminaries with lamp holders etc complete with all accessories and including connecting up with twin core twisted flexible cable suitable size of 230V, 50HZ complete all as specified and directed. Make:- CG Cat part No LBHP-10-CDL or equivalent in Philips/ Luker.

S&F highly durable surface mounted 10 watts LED batten/surface constructed of fire retardant engineering grade extruded aluminium and decorative end cap complete with tube rod,driver including 3 core 1.0 sqmm copper conductor cable, 240V, 50Hz, 1000lumen, 100 lumen per watt for connection and accessories complete all as specified and directed. Make:- CG Cat part No LDL-10-CDL or equivalent in Philips/ Luker.

S&F building security light LED 25 W with Lumen O/P 1800 with driver with rated voltage 240 V, 50Hz,including mounting GI (made out of 25 mm dia light grade pipe 0.8 m bent two shape including FI clamps nut bolts etc complete all as specified and directed. Make : CG LSTS-25-CDL/ Philips/ Luker.

S&F sheet metal enclosure single pole & neutral for 240 volts 8 way with 200 Amp rated bus bar flush /surface mounting double door complete all as specified and directed.

S&F sheet metal enclosure single pole & neutral for 240 volts 4/6 way with 200 Amp rated bus bar flush /surface mounting double door, complete all as specified and directed.

S&F MCB single pole 240 volt 6 to 40 amps 10 KA breaking capacity, 'C' series complete all as specified and directed.

S&F MCB single pole and neutral 240 volt 6 to40 amps 10 KA breaking capacity, 'C' series complete all as specified and directed.

M&L for earthing complete with galvanized street earth plate electrode 600x600x6mm thick buried directly in ground (earth plate not less than 2.25mtr deep below normal ground level) with top edge of the plate not less then 1.50 mtr. below the normal ground level connected to galvanized earth lead wire 4.00 mm dia by means of bolts nuts check nuts & washer of galvanized iron or steel all as shown in electrical plate No 5 connected to earthing test point all as specified and testing on completion including the material and labour for:- (a) Excavation and earth work or drilling hole for electrode in any type of soil. (b) PCC pit in cement concrete 1:2:4 type B-1. (c) Pre cast RCC cover with suitable handle 40mm thick in PCC 1:2:4 reinforced with welded steel wire fabric weighting not less than 1.87 Kg/sqmm. (d) Funnel with watering pipe of GI 20mm nominal bore medium grade and Aluminum lugs etc all as specified. (e) 15mm nominal bore medium grade GI protection pipe up to 7.50 meter long for protection of earthing lead. (f) Requisite quantity of charcoal and common salt. (g) Connection to earthing test point and testing on completion.

S&F exhaust fan metallic 300mm sweep single phase 240V 50Hz and connecting up with 3 core 1 sqmm wire from fan to ceiling rose complete all as specified and directed.

S&F ceiling fans 1200mm sweep 240V 50Hz with all fixing accessories complete all as specified and directed.

Excavation in trenches for laying of cables, poles and stay in any type of soil not exceeding 1.5 mtr wide and not exceeding 1.50 mtr deep and getting out complete all as specified and directed.

S&F double wall corrugated high density polymer ethyl (HDEP) pipe for laying of electric cable of size 50mm outer diameter and 38mm inner diameter with IS 14930 (part 2) 2001 and 6mm thickness laid in trenches, wall, floor, pole including bends, sockets and other connected accessories complete all as specified and directed.

Supply and laying in trenches or fixing in walls / poles or drawing through pipe XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) with aluminium conductor, 1100 volts, grade cross sectional area 10 sq mm, 4 core including testing after laid and jointed complete all as specified and directed.

NOTE:- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs.58,500.00]

NORTH INDIA PEST CONTROL

Devika Constructions

DE PRETTY AND CO

SHUB CONSTRUTION

M/s Jagdish Staioners and General Stores

M/s DS Khekde

MVN Enterprises

Vishwakarma Engineering Works

Bidder Name

DE PRETTY AND CO

Vishwakarma Engineering Works

MVN Enterprises

SHUB CONSTRUTION

M/s DS Khekde

Devika Constructions

M/s Jagdish Staioners and General Stores

M/s M.G. Hargunani

NORTH INDIA PEST CONTROL