Construction of Auditorium, Expansion of Boys andGirls hostel, farmer training hostel and other miscellaneous development works for RLBCAU, Jhansi, UP

1.1.2.2 Disposal of earth by Mechanical Transport including loading,unloading

and stacking 0 to 2 km

1.1.4.1 Disposal of excavated rock by Mechanical Transport including

loading,unloading and stacking 0 to 1km

1.1.4.2 Disposal of excavated rock by Mechanical Transport including

loading,unloading and stacking 0 to 2km

2.3.1 Banking excavated earth in layers not exceeding 20 cm in depth,

clods, watering, rolling each layer with ½ tonne roller, or wooden or

steel rammers, and rolling every 3rd and top-most layer with power

roller of minimum 8 tonnes and dressing up, in embankments for

flood banks, marginal banks, and guide banks etc., lead upto 50 m and

lift upto 1.5 m : All kinds of soil

2.6 Earth work in excavation by mechanical means (Hydraulic

excavator)/manual means over areas (exceeding 30 cm in depth, 1.5

m in width as well as 10 sqm on plan) including getting out and

disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as

directed by Engineer-in-charge.

2.7 Earth work in excavation by mechanical means (Hydraulic excavator)/

manual means over areas (exceeding 30 cm in depth, 1.5 m in width

as well as 10 sqm on plan) including getting out and disposal of

excavated earth lead upto 50 m and lift upto 1.5 m, as directed by

Engineer-incharge.

2.7.3 Hard rock (blasting prohibited) 1197.61 1184.30 1259.27 cum 15,08,110.15

2.8 Earth work in excavation by mechanical means (Hydraulic excavator) /

manual means in foundation trenches or drains (not exceeding 1.5 m

in width or 10 sqm on plan), including dressing of sides and ramming

of bottoms, lift upto 1.5 m, including getting out the excavated soil and

disposal of surplus excavated soil as directed, within a lead of 50 m.

ANUJ NAVNEET Digitally signed by ANUJ

CHACHA Date: 2022.10.14

Schedule of Quantities (Civil Items) 3

DSR 2021 Description ABTOTAL CPWD 2021 Enhanced Unit AMOUNT

No. uoQTY. /MR rate rate with

2.3 Banking excavated earth in layers not exceeding 20 cm in depth,

breaking clods, watering, rolling each layer with ½ tonne roller, or

wooden or steel rammers, and rolling every 3rd and top-most layer

with power roller of minimum 8 tonnes and dressing up, in

embankments for roads, flood banks, marginal banks, and guide banks

etc., lead upto 50 m and lift upto 1.5 m :

2.25 Filling available excavated earth (excluding rock) in trenches, plinth,

sides of foundations etc. in layers not exceeding 20cm in depth,

consolidating each deposited layer by ramming and watering, lead up

to 50 m and lift upto 1.5 m.

2.27 Supplying and filling in plinth with sand under floors, including watering,

ramming, consolidating and dressing complete.

2.28 Surface dressing of the ground including removing vegetation and

inequalities not exceeding 15 cm deep and disposal of rubbish, lead up

to 50 m and lift up to 1.5 m.

2.31 Clearing jungle including uprooting of rank vegetation, grass, brush

wood, trees and saplings of girth up to 30 cm measured at a height of 1

m above ground level and removal of rubbish up to a distance of 50 m

outside the periphery of the area cleared.

2.34.1 Supplying chemical emulsion in sealed containers including delivery as

specified. Chlorpyriphos emulsifiable concentrate of 20% 1866.25 200.90 213.62 litre 3,98,668.33

2.35 Diluting and injecting chemical emulsion for POST-

CONSTRUCTIONAL anti-termite treatment (excluding the cost of

chemical emulsion) :

2.35.2 Along the external wall below concrete or masonry apron using

chemical emulsion @ 2.25 litres per linear metre including drilling and

plugging holes etc.:

2.35.2.1 With Chlorpyriphos E.C. 20% with 1% concentration 602.99 44.70 47.53 metre 28,660.11

2.35.3.1 Treatment of soil under existing floors using chemical emulsion @ one

litre per hole, 300 mm apart including drilling 12 mm diameter holes

and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to 3561.98 256.15 272.37 sqm 9,70,176.49

match the existing floor: With Chlorpyriphos E.C. 20% with 1%

ANUJ NAVNEET Digitally signed by ANUJ

CHACHA Date: 2022.10.14

Schedule of Quantities (Civil Items) 4

DSR 2021 Description ABTOTAL CPWD 2021 Enhanced Unit AMOUNT

No. uoQTY. /MR rate rate with

4.1 Providing and laying in position cement concrete of specified grade

excluding the cost of centering and shuttering - All work up to plinth

4.1.5 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from

natural sources : 6 graded stone aggregate 20 mm 99.55 6833.40 7265.99 cum 7,23,329.30

nominal size derived from natural sources)

4.1.8 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources

: 8 graded stone aggregate 40 mm nominal size derived from natural 306.98 6326.05 6726.52 cum 20,64,887.49

4.17 Making plinth protection 50mm thick of cement concrete 1:3:6 (1

cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal

size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well

rammed and consolidated and grouted with fine sand, including

necessary excavation, levelling & dressing & finishing the top smooth.

REINFORCED CEMENT CONCRETE

5.30 Add for plaster drip course/ groove in plastered surface or moulding to

R.C.C. projections.

5.35 Add for using extra cement in the items of design mix over and above

the specified cement content therein.

5.9 Centering and shuttering including strutting, propping etc. and removal

5.9.1 Foundations, footings, bases of columns, etc. for mass concrete

5.9.2 Walls (any thickness) including attached pilasters, butteresses, plinth

and string courses etc.

5.9.3 Suspended floors, roofs, landings, balconies and access platform

5.9.5 Lintels, beams, plinth beams, girders, bressumers and cantilevers

5.9.6 Columns, Pillars, Piers, Abutments, Posts and Struts 6093.60 804.25 855.16 sqm 52,11,005.31

5.9.7 Stairs, (excluding landings) except spiral-staircases 845.26 657.75 699.39 sqm 5,91,166.39

5.9.14 Extra for shuttering in circular work (20% of respective centering and

shuttering items)

5.9.15 Small lintels not exceeding 1.5 m clear span, moulding as in cornices,

window sills, string courses, bands, copings, bed plates, anchor blocks 227.05 307.95 327.44 sqm 74,345.25

5.9.16 Edges of slabs and breaks in floors and walls

5.9.16.1 Under 20 cm wide

5.9.17 Cornices and mouldings 575.00 769.30 818.00 sqm 4,70,350.00

ANUJ NAVNEET Digitally signed by ANUJ

CHACHA Date: 2022.10.14

Schedule of Quantities (Civil Items) 5

DSR 2021 Description ABTOTAL CPWD 2021 Enhanced Unit AMOUNT

No. uoQTY. /MR rate rate with

5.9.19 Weather shade, Chajjas, corbels etc., including edges 73.00 814.95 866.54 sqm 63,257.42

5.11.1 Extra for additional height in centering, shuttering where ever required

with adequate bracing, propping etc., including cost of de-shuttering

and decentering at all levels, over a height of 3.5 m, for every

additional height of 1 metre or part thereof (Plan area to be measured). 3898.05 319.25 339.46 sqm 13,23,233.60

Suspended floors, roofs, landing, beams and balconies (Plan area to

5.22 Steel reinforcement for R.C.C. work including straightening, cutting,

bending, placing in position and binding all complete upto plinth level.

5.22.6 Thermo-Mechanically Treated bars of grade Fe-500D or more. 80605.21 89.65 95.33 Kg 76,84,094.86

5.22A Steel reinforcement for R.C.C. work including straightening, cutting,

bending, placing in position and binding all complete above plinth level.

5.22A.6 Thermo-Mechanically Treated bars of grade Fe-500 D or more. 422474.81 89.65 95.33 Kg 402,74,524.02

5.33 Providing and laying in position ready mixed or site batched design mix

cement concrete for reinforced cement concrete work; using coarse

aggregate and fine aggregate derived from natural sources, Portland

Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in

recommended proportions as per IS: 9103 to accelerate / retard setting

of concrete, to improve durability and workability without impairing

strength; including pumping of concrete to site of laying, curing,

carriage for all leads; but excluding the cost of centering, shuttering,

finishing and reinforcement as per direction of the engineer-in-charge;

for the following grades of concrete.

Note: Extra cement up to 10% of the minimum specified cement

content in design mix shall be payable separately. In case the cement

content in design mix is more than 110% of the specified minimum

cement content, the contractor shall have discretion to either re-design

the mix or bear the cost of extra cement.

5.33.1 All works upto plinth level

Concrete of M25 grade with minimum cement content of 330 kg /cum 1167.75 7997.30 8503.57 cum 99,30,060.87

5.33.2 All works above plinth level upto floor V level 3098.56 10080.15 10718.28 cum 332,11,190.80

ANUJ NAVNEET Digitally signed by ANUJ

CHACHA Date: 2022.10.14

Schedule of Quantities (Civil Items) 6

DSR 2021 Description ABTOTAL CPWD 2021 Enhanced Unit AMOUNT

No. uoQTY. /MR rate rate with

5.44.1 Providing and fixing of expansion joint system related with floor

location as per drawings and direction of Engineer-In-Charge. The

joints system will be of extruded aluminum base members, self aligning

/ self centering arrangement and support plates etc. as per ASTM

B221-02. The system shall be such that it provides floor to floor /floor

to wall expansion control system for various vertical locations in load

application areas that C C M-10ommodates multi directional seismic

movement without stress to it's components. System shall consist of

metal profiles with a universal aluminum base member designed to C

C M-10ommodate various project conditions and finish floor

treatments. The cover plate shall be designed of width and thickness

required to satisfy projects movement and loading requirements and

secured to base members by utilizing manufacturer’s pre-engineered

self-centering arrangement that freely rotates / moves in all directions.

The Self - centering arrangement shall exhibit circular sphere ends that

lock and slide inside the corresponding aluminum extrusion cavity to

allow freedom of movement and flexure in all directions including

vertical displacement. Provision of Moisture Barrier Membrane in the

Joint System to have watertight joint is mandatory requirement all as

per the manufactures design and as approved by Engineer -in-

Charge. (Material shall conform to ASTM 6063). Floor Joint of 100 mm

ANUJ NAVNEET Digitally signed by ANUJ

CHACHA Date: 2022.10.14

Schedule of Quantities (Civil Items) 7

DSR 2021 Description ABTOTAL CPWD 2021 Enhanced Unit AMOUNT

No. uoQTY. /MR rate rate with

5.45.1 Providing and fixing of expansion joint system related with wall joint

(internal/ external) location as per drawings and direction of Engineer-

In- Charge. The joints shall be of extruded aluminum base members,

self aligning / centering arrangement and support plates as per ASTM

B221- 02. The material shall be such that it provides an Expansion

Joints System suitable for vertical wall to wall/ wall to corner

application, both new and existing construction in office Buildings &

complexes with no slipping down tendency amongst the components of

the Joint System. The Joint System shall utilize light weight aluminum

profiles exhibiting minimal exposed aluminum surfaces mechanically

snap locking the multicellular to facilitate movement. (Material shall

conform to ASTM 6063.)

Wall Joint of 100 mm gap

5.46.1 Providing and fixing of expansion joint system of approved make and

manufacture for various roof locations as per approved drawings and

direction of Engineer-In-Charge. The joints shall be of extruded

aluminum base members with, self aligning and self centering

arragement support plates as per ASTM B221-02. The system shall be

such that it provides water tight roof to roof /roof to corner joint cover

expansion control system that is capable of accommodating

multidirectional seismic movement without stress to its components.

System shall consist of metal profile that incorporates a universal

aluminum base member designed to accommodate various project

conditions and roof treatments. The cover plate shall be designed of

width and thickness required to satisfy movement and loading

requirements and secured to base members by utilizing manufacturer’s

pre-engineered self-centering arrangement that freely rotates / moves

in all directions.

The Self centering arrangement shall exhibit circular sphere ends that

lock and slide inside the corresponding aluminum extrusion cavity to

allow freedom of movement and flexure in all directions including

vertical displacement. The Joint System shall resists damage or

deterioration from the impact of falling ice, exposure to UV, airborne

contaminants and occasional foot traffic from maintenance personnel.

Provision of Moisture Barrier Membrane in the Joint System to have

water tight joint is mandatory requirement. (Material shall confirm to

Roof Joint of 100 mm gap

6.1 Brick work with common burnt clay F.P.S. (non modular) bricks of class

designation 7.5 in foundation and plinth in:

ANUJ NAVNEET Digitally signed by ANUJ

CHACHA Date: 2022.10.14

Schedule of Quantities (Civil Items) 8

DSR 2021 Description ABTOTAL CPWD 2021 Enhanced Unit AMOUNT

No. uoQTY. /MR rate rate with

6.1.2 Cement mortar 1:6 (1 cement : 6 coarse sand) 534.89 6658.25 7079.75 cum 37,86,866.04

6.4.1 Brick work with common burnt clay F.P.S. (non modular) bricks of class

designation 7.5 in superstructure above plinth level up to floor V level

in all shapes and sizes in :

6.4.2 Cement mortar 1:6 (1 cement : 6 coarse sand) 227.27 8288.35 8813.05 cum 20,02,966.00

6.47 Providing and laying Autoclaved Aerated concrete (AAC) blocks

masonry with 150mm/230mm/300 mm thick with Grade-I AAC blocks

of density 551 to 650 kg/ cum conforming to IS: 2185 (Part 3) in super

structure above plinth level up to floor V level with RCC band at sill

level and lintel level with approved block laying polymer modified

adhesive mortar all complete as per direction of Engineer-in-Charge.

(The payment of RCC band and reinforcement shall be made for

6.13 Half brick masonry with common burnt clay F.P.S. (non modular) bricks

of class designation 7.5 in superstructure above plinth level up to floor

6.13.1 Cement mortar 1:3 (1 cement :3 coarse sand) 1089.08 1043.10 1109.13 sqm 12,07,931.30

6.38 Providing and laying Autoclaved Aerated concrete (AAC) blocks

masonry 100 mm/ 125 mm thick with Grade-I AAC blocks of density

551 to 650 kg/ cum conforming to IS: 2185 (Part 3) in super structure

above plinth level up to floor V level in cement mortar 1:4 (1 cement : 4 949.40 8890.80 9453.64 cum 89,75,301.01

coarse sand). The rate includes providing and placing in position 2 Nos

6 mm dia M.S. bars at every third course of masonry work.

6.15 Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at

every third course of half brick masonry.

6.44 Brick edging 7cm wide 11.4 cm deep to plinth protection with common

burnt clay F.P.S. (non modular) bricks of class designation 7.5

including grouting with cement mortar 1:4 (1 cement : 4 fine sand).

MARBLE AND GRANITE WORK

8.2 Providing and fixing 18 mm thick gang saw cut, mirror polished,

premoulded and prepolished, machine cut for kitchen platforms, vanity

counters, window sills, facias and similar locations of required size,

approved shade, colour and texture laid over 20 mm thick base cement

mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement,

mixed with matching pigment, epoxy touch ups, including rubbing,

curing, moulding and polishing to edges to give high gloss finish etc.

complete at all levels.

8.2.3 Granite stone slab of all colour and texture except black, Cherry/ Ruby

ANUJ NAVNEET Digitally signed by ANUJ

CHACHA Date: 2022.10.14

Schedule of Quantities (Civil Items) 9

DSR 2021 Description ABTOTAL CPWD 2021 Enhanced Unit AMOUNT

No. uoQTY. /MR rate rate with

8.3 Providing edge moulding to 18 mm thick marble stone counters,

Vanities etc., including machine polishing to edge to give high gloss

finish etc. complete as per design approved by Engineer-in-Charge.

8.4 Extra for fixing marble /granite stone, over and above corresponding

basic item, in facia and drops of width upto 150 mm with epoxy resin

based adhesive, including cleaning etc. complete.

8.5 Extra for providing opening of required size & shape for wash basin/

kitchen sink in kitchen platform, vanity counter and similar location in

marble/ Granite/ stone work, including necessary holes for pillar taps

etc. including moulding, rubbing and polishing of cut edges etc.

8.10' Providing and fixing stone slab with table rubbed, edges rounded and

polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal

partitions by cutting a chase of appropriate width with chase cutter and

embedding the stone in the chase with epoxy grout or with cement 45.00 3542.85 3767.13 each 1,69,520.85

concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6

mm nominal size) as per direction of Engineer-in-charge and finished

11.56.1 Providing and laying Polished Granite stone flooring in required design

and patterns, in linear as well as curvilinear portions of the building, all

complete as per the architectural drawings, with 18 mm thick stone

slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement :

4 coarse sand), laid and jointed with cement slurry and pointing with

white cement slurry admixed with pigment of matching shade, including

rubbing, curing and polishing etc. all complete as specified and as

directed by the Engineer-in-Charge.

Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat

Eye or equivalent.

Polished Granite stone slab colour of Black, Cherry/Ruby

Red or equivalent

9 WOOD AND P.V.C. WORK

9.1 Providing wood work in frames of doors, windows, clerestory windows

and other frames, wrought framed and fixed in position with hold fast

lugs or with dash fasteners of required dia & length (hold fast lugs or

dash fastener shall be paid for separately).

ANUJ NAVNEET Digitally signed by ANUJ

CHACHA Date: 2022.10.14

Schedule of Quantities (Civil Items) 10

DSR 2021 Description ABTOTAL CPWD 2021 Enhanced Unit AMOUNT

No. uoQTY. /MR rate rate with

9.53 Providing 40x5 mm flat iron hold fast 400 mm long including fixing to

frame with 10 mm diameter bolts, nuts and wooden plugs and

embedding in cement concrete block 300x100x150 mm 1:3:6 mix (1 2848.00 194.35 206.65 each 5,88,539.20

cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal

9.121 Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames

of cross-section 90 mm x 45 mm having single rebate of 32 mm x 15

mm to receive shutter of 30 mm thickness. The laminate shall be

moulded with fire resistant grade unsaturated polyester resin and

chopped mat. Door frame laminate shall be 2mm thick and shall be 313.35 702.60 747.08 RM 2,34,097.52

filled with suitable wooden block in all the three legs. The frame shall

be covered with fiber glass from all sides. M.S. stay shall be provided

at the bottom to steady the frame.

9.122.2 30 mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door shutter in

different plain and wood finish made with fire retardant grade

unsaturated polyester resin, moulded to 3 mm thick FRP laminate all

around, with suitable wooden blocks inside at required places for fixing

of fittings and polyurethane foam (PUF)/Polystyrene foam to be used 102.38 3963.70 4214.62 SQM 4,31,492.80

as filler material throughout the hollow panel, casted monolithically with

testing parameters of F.R.P. laminate conforming to table - 3 of IS:

14856, complete as per direction of Engineer-in-charge.

9.21 Providing and fixing ISI marked flush door shutters conforming to IS :

2202 (Part I) non-decorative type, core of block board construction with

frame of 1st class hard wood and well matched commercial 3 ply

veneering with vertical grains or cross bands and face veneers on both

faces of shutters:

9.21.1 35 mm thick including ISI marked Stainless Steel butt hinges with

necessary screws

9.23 Extra for providing lipping with 2nd class teak wood battens 25 mm

minimum depth on all edges of flush door shutters (over all area of 653.50 401.40 426.81 sqm 2,78,920.34

door shutter to be measured).

9.127 Providing & Fixing decorative high pressure laminated sheet of plain /

wood grain in gloss / matt/ suede finish with high density protective

surface layer and reverse side of adhesive bonding quality conforming

to IS : 2046 Type S, including cost of adhesive of approved quality.

Note :- The laminate should be fixed hot pressed using phenol

formeldehyde synthetic resin adhesive conforming to BWP grade

specified in IS848.

ANUJ NAVNEET Digitally signed by ANUJ

CHACHA Date: 2022.10.14

Schedule of Quantities (Civil Items) 11

DSR 2021 Description ABTOTAL CPWD 2021 Enhanced Unit AMOUNT

No. uoQTY. /MR rate rate with

9.165 Providing and fixing bright /matt finished Stainless Steel handles of

approved quality & make with necessary screws etc all complete.

9.101.2 Providing and fixing aluminium hanging floor door stopper, ISI marked,

anodised (anodic coating not less than grade AC 10 as per IS : 1868)

transparent or dyed to required colour and shade, with necessary

screws etc. complete. Twin rubber stopper

9.46.3 Providing and fixing chromium plated brass curtain rod having wall

thickness of 1.25mm with two chromium plated brass brackets fixed

with C.P. brass screws and PVC sleeves etc., wherever necessary 933.34 482.30 512.83 metre 4,78,644.75

9.48.2 Providing and fixing M.S. grills of required pattern in frames of windows

etc. with M.S. flats, square or round bars etc. including priming coat

with approved steel primer all complete.

Fixed to openings /wooden frames with rawl plugs screws etc.

9.40.1.1 Providing and fixing wooden moulded beading to door and window

frames with iron screws, plugs and priming coat on unexposed surface

etc. 2nd class teak wood

complete : 50x12 mm

9.112 Providing and fixing 2nd class teak wood lipping/ moulded beading or

taj beading of size 18X5 mm fixed with wooden adhesive of approved

and screws/nails on the edges of the Pre-laminated particle board as

per direction of Engineer-in-charge.

9.147B.1 Fixed window / ventilator made of (small series) frame 47 x 50 mm &

mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and

single glazing bead of appropriate dimension. (Area upto 0.75 sqm.)

9.147C Providing and fixing factory made uPVC white colour casement/

Casement cum fixed glazed door comprising of uPVC multi-

chambered frame, sash and mullion (where ever required) extruded

profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel

section made from roll forming process of required length (shape &

size according to uPVC profile), uPVC extruded glazing beads of

appropriate dimension, EPDM gasket, zinc alloy (white powder coated)

3D hinges and one handle on each side of panels along with zinc

plated mild steel multi point locking

ANUJ NAVNEET Digitally signed by ANUJ

CHACHA Date: 2022.10.14

Schedule of Quantities (Civil Items) 12

DSR 2021 Description ABTOTAL CPWD 2021 Enhanced Unit AMOUNT

No. uoQTY. /MR rate rate with

having transmission gear, cylinder with keeps and one side key, G.I

fasteners 100 x 8 mm size for fixing frame to finished wall and

necessary stainless steel screws, etc. Profile of frame & sash shall be

mitred cut and fusion welded at all corners, mullion (if required) shall

be also fusion welded including drilling of holes for fixing hardware's

and drainage of water etc. After fixing frame the gap between frame

and adjacent finished wall shall be filled with weather proof silicon

sealent over backer rod of required size and of approved quality, all

complete as per approved drawing & direction of Engineer-in-Charge.

(Single / double glass panes and silicon sealent shall be paid

separately). Variation in profile dimension in higher side shall be

accepted but no extra payment on this account shall be made.

Note: For uPVC frame, sash and mullion extruded profiles minus 5%

tolerance in dimension i.e. in depth & width of profile shall be

9.147C.2 Casement door with top hung ventilator with 3D and S.S. friction

hinges (400 x 19 x 1.9 mm) made of (big series) frame 65 x 66 mm,

sash 65 x 110 mm & mullion 65 x 90 mm all having wall thickness of

2.3 ±. 0.2 mm and single glazing bead / double glazing bead of 491.00 10451.95 11113.62 sqm 54,56,787.00

appropriate dimension.

(Area of door upto 2.50 sqm)

9.147D Providing and fixing factory made uPVC white colour sliding glazed

window upto 1.50 m in height dimension comprising of uPVC multi-

chambered frame with in-built roller track and sash extruded profiles

duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section

made from roll forming process of required length (shape & size

according to uPVC profile), appropriate dimension of uPVC extruded

glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile,

zinc alloy (white powder coated) touch locks with hook, zinc alloy body

with single nylon rollers (weight bearing capacity to be 40 kg), G.I

fasteners 100 x 8 mm size for fixing frame to finished wall and

necessary stainless steel screws etc.

ANUJ NAVNEET Digitally signed by ANUJ

CHACHA Date: 2022.10.14

Schedule of Quantities (Civil Items) 13

DSR 2021 Description ABTOTAL CPWD 2021 Enhanced Unit AMOUNT

No. uoQTY. /MR rate rate with

Profile of frame & sash shall be mitred cut and fusion welded at all

corners, including drilling of holes for fixing hardware's and drainage of

water etc. After fixing frame the gap between frame and adjacent

finished wall shall be filled with weather proof silicon sealent over

backer rod of required size and of approved quality, all complete as per

approved drawing & direction of Engineer-in-Charge. (Single / double

glass panes, wire mesh and silicon sealent shall be paid separately).

Variation in profile dimension in higher side shall be accepted but no

extra payment on this account shall be made.

Note: For uPVC frame and sash extruded profiles minus 5% tolerance

in dimension i.e. in depth & width of profile shall be acceptable.

9.147D.4 Three track three panels sliding window with fly proof S.S wire mesh

(Two nos. glazed & one no. wire mesh panels) made of (big series)

frame 110 x 45 mm & sash 37 x 65 mm both having wall thickness of

2.3 ± 0.2 mm and single glazing bead / double glazing bead of

appropriate dimension. (Area of window upto 1.75 sqm)

9.161 Providing and fixing fire resistant door frame of section 50 x 60 mm on

horizontal side & 35 x 60 mm on vertical sides having built in rebate

made out of 1.6 mm thick GI sheet ( Zinc coating not less than 120gm/

m²) suitable for mounting 120 min Fire Rated Glazed Door Shutters.

The frame shall be filled with Mineral wool Insulation having density

min 96Kg/m³ . The frame will have a provision of G.I. Anchor fastners

nos ( 5 each on vertical style & 4 on horizontal style of size M10 x 80 )

suitable for fixing in the opening along with Factory made Template for 104.72 1791.05 1904.43 metre 1,99,431.91

SS Ball Bearing Hinges of Size 100x89x3mm for fixing of fire rated

glazed shutter . The frame shall be finished with a approved fire

resistant primer or Powder coating of not less than 30 micron in

desired shade as per the directions of Engineer - in- charge . (Cost of

SS ball bearing hinges is excluded)

ANUJ NAVNEET Digitally signed by ANUJ

CHACHA Date: 2022.10.14

Schedule of Quantities (Civil Items) 14

DSR 2021 Description ABTOTAL CPWD 2021 Enhanced Unit AMOUNT

No. uoQTY. /MR rate rate with

9.162 Providing and fixing 60 mm thick glazed fire resistant door shutters of

120 min Fire Rating confirming to IS:3614 (Part II) or EN1634-1:1999,

tested and certified as per laboratory approved by Engineer-in-charge,

with suitable mounting on door frame, consisting of vertical styles, top

rail & side rail 60 mm x 60 mm wide and bottom rail of 110 mm x 60

mm made out of 1.6mm thick G.I. sheet (zinc coating not less than

120gm/m²) duly filled mineral wool insulation having density min 96 kg/ 68.46 9736.05 10352.40 sqm 7,08,725.30

m³ and fixing with necessary stainless steel ball bearing hinges of size

100x89x3mm of approved make, including applying a coat of approved

fire resistant primer or powder coating not less than 30 micron etc all

complete as per direction of Engineer-in-charge (panelling to be paid

for seperately)

9.164 Providing and fixing glazing in fire resistant door shutters, fixed panels

& partitions etc. with G.I. beading made out of 1.6 mm thick G.I. sheet

(zinc coating not less than 120 gm/m²) of size 20 x 33 mm screwed

with M4 x 38 mm SS screws at distance 75 mm from the edges and

150 mm c/c , including applying a coat of approved fire resistant

primer/ powder coating of not less than 30 micron on G.I. beading, &

special ceramic tape kerafix 2000 of 5 x 20 mm size etc complete in all

respect as per NBC 2016, IS 16231 (Part 3):2016 and as per direction

of Engineer incharge with glass of required thickness having 120

minutes of fire resistance both integrity & radiation control (EW120)

and minimum 20 minutes of insulation (EI20). The glass should be 56.35 39995.80 42527.76 sqm 23,96,439.28

manufactured in India. The manufacturer have to give test

report/certification of fire glass and the glass should be toughned in

nature with Bi Directional Fire Protection and have the stamp showing

the value of E, EW & EI. The glass shall be tested in approved NABL

accredited lab or by any other accreditation body which operates in

accordance with ISO/IEC 17011 and accredits labs as per ISO/IEC

17025 for testing and calibration scopes shall be eligible. The

maximum glazing size shall not be more than 1100x2200 mm (w x h)

9.139 Providing and fixing panic bar / latch (Double point) fitted with a single

body, Trim Latch & Lock on back side of the Panic Latch of reputed

brand and manufacture to be approved by the Engineer- in- charge, all

9.84 Providing and fixing aluminium extruded section body tubular type

universal hydraulic door closer (having brand logo with ISi, IS : 3564,

embossed on the body, door weight upto 36 kg to 80 kg and door width

from 701 mm to 1000 mm), with double speed adjustment with

necessary accessories and screws etc. complete.

ANUJ NAVNEET Digitally signed by ANUJ

CHACHA Date: 2022.10.14

Schedule of Quantities (Civil Items) 15

DSR 2021 Description ABTOTAL CPWD 2021 Enhanced Unit AMOUNT

No. uoQTY. /MR rate rate with

8101 SS ball bearing of size 100 x89x3mm 30.00 450.00 478.49 each 14,354.70

10.18 Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for

eiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5

mm thick M.S. sheet with its top surface hacked for proper bonding, top

lid shall be screwed into the cast iron/ M.S. sheet box by means of 3.3 360.00 185.20 196.92 EACH 70,891.20

mm dia round headed screws, one lock at the corners. Clamp shall be

made of 12 mm dia M.S. bar bent to shape as per standard drawing.

10.16.2 Steel work in built up tubular (round, square or rectangular hollow

tubes etc.) trusses etc., including cutting, hoisting, fixing in position and

applying a priming coat of approved steel primer, including welding and 44806.91 168.95 179.65 kg 80,49,561.22

bolted with special shaped washers etc. complete.

10.2 Structural steel work riveted, bolted or welded in built up sections,

trusses and framed work, including cutting, hoisting, fixing in position

and applying a priming coat of approved steel primer all complete.

10.5 Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6

mm angle iron and 3 mm M.S. gusset plates at the junctions and

corners, all necessary fittings complete, including applying a priming

coat of approved steel primer.

10.5.1 Using M.S. angles 40x40x6 mm for diagonal braces 4.73 4781.15 5083.82 sqm 24,046.47

10.27 carbon steel galvanised ( minimum coating 5 micron) dash

fastener of 10 mm dia double threaded 6.8 grade (yield strength 480

counter sunk head, comprising of 10 m dia polyamide PA 6 grade

including drilling of hole in frame , concrete/ masonry, etc. as per

Engineer-in-charge.

ANUJ NAVNEET Digitally signed by ANUJ

CHACHA Date: 2022.10.14

Schedule of Quantities (Civil Items) 16

DSR 2021 Description ABTOTAL CPWD 2021 Enhanced Unit AMOUNT

No. uoQTY. /MR rate rate with

10.28 Providing and fixing stainless steel ( Grade 304) railing made of Hollow

tubes, channels, plates etc., including welding, grinding, buffing,

polishing and making curvature (wherever required) and fitting the

same with necessary stainless steel nuts and bolts complete, i/c fixing

the railing with necessary accessories & stainless steel dash fasteners

, stainless steel bolts etc., of required size, on the top of the floor or the 2027.60 612.25 651.01 kg 13,19,987.88

side of waist slab with suitable arrangement as per approval of

Engineer-incharge,

(for payment purpose only weight of stainless steel members shall be

considered excluding fixing accessories such as nuts, bolts, fasteners

10.29.2 Providing & fixing fly proof wire gauze to windows, clerestory windows

& doors with M.S. Flat 15x3 mm and nuts & bolts complete.

Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm 502.50 971.55 1033.05 SQM 5,19,107.63

aperture on both sides

10.25 Steel work welded in built up sections/ framed work, including cutting,

hoisting, fixing in position and applying a priming coat of approved

steel primer using structural steel etc. as required.

10.25.2 In gratings, frames, guard bar, ladder, railings, brackets, gates and

11.5 62 mm thick cement concrete flooring with concrete hardener

topping,under layer 50 mm thick cement concrete 1:2:4 (1 cement : 2

coarse sand : 4 graded stone aggregate 20mm nominal size) and top

layer 12mm thick cement hardener consisting of mix 1:2 (1 cement

hardener mix : 2 graded stone aggregate, 6mm nominal size) by 25.17 928.65 987.44 sqm 24,853.86

volume, hardening compound mixed @ 2 litre per 50 kg of cement or

as per manufacture’s specifications. This includes cost of cement

slurry, but excluding the cost of nosing of steps etc. complete.

11.37A Providing and fixing Ist quality rectified ceramic glazed wall tiles

conforming to IS: 15622 (thickness to be specified by the

manufacturer), of approved make, in all colours, shades except

burgundy, bottle green, black of min. size 300mm*600mm as approved

by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 2380.11 938.50 997.91 sqm 23,75,135.57

mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and

jointing with grey cement slurry @ 3.3kg per sqm, including pointing in

white cement mixed with pigment of matching shade complete.

ANUJ NAVNEET Digitally signed by ANUJ

CHACHA Date: 2022.10.14

Schedule of Quantities (Civil Items) 17

DSR 2021 Description ABTOTAL CPWD 2021 Enhanced Unit AMOUNT

No. uoQTY. /MR rate rate with

11.39 Providing and laying rectified Glazed Ceramic floor tiles of size

300x300 mm or more (thickness to be specified by the manufacturer),

of 1st quality conforming to IS : 15622, of approved make, in colours

White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement

mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry

@ 3.3kg/ sqm including grouting the joints with white cement and

matching pigments etc., complete.

Providing and laying Vitrified tiles in floor in different sizes (thickness to

be specified by the manufacturer) with water absorption less than

0.08% and conforming to IS:15622, of approved brand & manufacturer,

in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1

cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm

including grouting the joints with white cement and matching pigments

etc. The tiles must be cut with the zero chipping diamond cutter only .

Laying of tiles will be done with the notch trowel, plier, wedge, clips of

required thickness, leveling system and rubber mallet for placing the

tiles gently and easily. Size of Tile 600 x 600 mm

11.41A.1.1 Double charge vitrified tile polished finish of size 4497.45 1286.60 1368.05 sqm 61,52,736.47

Providing and laying Vitrified tiles in different sizes (thickness to be

specified by manufacturer), with water absorption less than 0.08 % and

conforming to I.S. 15622, of approved make, in all colours & shade, in

skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1

cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm

including grouting the joint with white cement & matching pigments etc.

Chequerred precast cement concrete tiles 22 mm thick in footpath &

courtyard, jointed with neat cement slurry mixed with pigment to match

the shade of tiles, including rubbing and cleaning etc. complete, on 20

mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand).

11.20.1 Light shade pigment using white cement 747.71 1233.05 1311.11 sqm 9,80,330.06

ANUJ NAVNEET Digitally signed by ANUJ

CHACHA Date: 2022.10.14

Schedule of Quantities (Civil Items) 18

DSR 2021 Description ABTOTAL CPWD 2021 Enhanced Unit AMOUNT

No. uoQTY. /MR rate rate with

12.1 Providing corrugated G.S. sheet roofing including vertical / curved

surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm

diameter with bitumen and G.I. limpet washers or with G.I. limpet

washers filled with white lead, including a coat of approved steel primer

and two coats of approved paint on overlapping of sheets complete (up

to any pitch in horizontal/ vertical or curved surfaces),

excluding the cost of purlins, rafters and trusses and including cutting

to size and shape wherever required.

12.1.2 0.80 mm thick with zinc coating not less than 275 gm/m² 1500.00 1135.45 1207.33 sqm 18,10,995.00

12.21 Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2

coarse sand : 4 stone aggregate 10 mm and down gauge), including

finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per

standard design :

12.22 Making khurras 45x45 cm with average minimum thickness of 5 cm

cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone

aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400

micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse

sand) and a coat of neat cement, rounding the edges and making and

finishing the outlet complete.

12.41 Providing and fixing on wall face unplasticised Rigid PVC rain water

pipes conforming to IS : 13592 Type A, including jointing with seal ring

conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i)

Single socketed pipes.

12.42 Providing and fixing on wall face unplasticised - PVC moulded fittings/

accessories for unplasticised Rigid PVC rain water pipes conforming to

IS : 13592 Type A, including jointing with seal ring conforming to IS :

5382, leaving 10 mm gap for thermal expansion.

12.42.1 Coupler

12.42.6 Shoe (Plain)

ANUJ NAVNEET Digitally signed by ANUJ

CHACHA Date: 2022.10.14

Schedule of Quantities (Civil Items) 19

DSR 2021 Description ABTOTAL CPWD 2021 Enhanced Unit AMOUNT

No. uoQTY. /MR rate rate with

12.43 Providing and fixing unplasticised -PVC pipe clips of approved design

to unplasticised - PVC rain water pipes by means of 50x50x50 mm

hard wood plugs, screwed with M.S. screws of required length,

including cutting brick work and fixing in cement mortar 1:4 (1 cement :

4 coarse sand) and making good the wall etc. complete.

12.44 Providing and fixing to the inlet mouth of rain water pipe cast iron

grating 15 cm diameter and weighing not less than 440 grams.

12.52 Providing and fixing tiled false ceiling of specified materials of size

595x595 mm in true horizontal level, suspended on inter locking metal

grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/

sqm, both side inclusive) consisting of main "T" runner with suitably

spaced joints to get required length and of size 24x38 mm made from

0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center

and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum)

sheet, 1200 mm long spaced between main "T" at 600 mm center to

center to form a grid of 1200x600 mm and secondary cross "T" of

length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum)

sheet to be interlocked at middle of the 1200x600 mm panel to form

grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying

false ceiling tiles of approved texture in the grid including, required

cutting/making, opening for services like diffusers, grills, light fittings,

fixtures, smoke detectors etc. Main "T" runners to be suspended from

ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to

ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI

adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8

mm spaced at 1200 mm center to center along main T, bottom

exposed width of 24 mm of all T-sections shall be pre-painted with

polyester paint, all complete for all heights as per specifications,

drawings and as directed by Engineer-in-charge.

12.52.3 12.5 mm thick square edge PVC Laminated Gypsum Tile of size

595x595 mm, made of Gypsum plasterboard, manufactured from

natural gypsum as per IS 2095 part I and laminated with white 0.16mm

thick fire retardant PVC film on the face side and 12micron metalized

polyester on the back side with all edges sealed with the face side PVC 352.43 1948.95 2072.33 Sqm 7,30,351.26

film which goes around and wraps the edges and is bonded to the

edges and the back side metalized polyester film so as to make the tile

a completely sealed unit.

ANUJ NAVNEET Digitally signed by ANUJ

CHACHA Date: 2022.10.14

Schedule of Quantities (Civil Items) 20

DSR 2021 Description ABTOTAL CPWD 2021 Enhanced Unit AMOUNT

No. uoQTY. /MR rate rate with

13.4 12 mm cement plaster of mix :

13.83 Providing and applying 12 mm thick (average) premixed formulated

one coat gypsum lightweight plaster having additives and light weight

aggregates as vermiculite/ perlite respectively conforming to IS: 2547

(Part - 1 & II) 1976, applied on hacked / uneven background such as

bare brick/ block/ RCC work on walls & ceiling at all floors and

locations, finished in smooth line and level etc. complete.

13.83.2 Two coats

13.12 18 mm cement plaster in two coats under layer 12 mm thick cement

plaster 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick

cement plaster 1:3 (1 cement : 3 coarse sand) finished rough with

13.21 Extra for providing and mixing water proofing material in

plaster work in proportion recommended by the manufacturers.

13.22 Extra for plastering exterior walls of height more than 10 m from

ground level for every additional height of 3 m or part thereof.

13.16 6 mm cement plaster of mix :

13.47 Finishing walls with Premium Acrylic Smooth exterior paint with

Silicone additives of required shade:

13.47.1 New work (Two or more coats applied @ 1.43 ltr/10 sqm over and

including priming coat of exterior primer applied @ 2.20 kg/10 sqm) 5886.57 162.35 172.63 Sqm 10,16,198.58

13.80 Providing and applying white cement based putty of average thickness

1 mm, of approved brand and manufacturer, over the plastered wall

surface to prepare the surface even and smooth complete.

13.82 Wall painting with acrylic emulsion paint, having VOC (Volatile Organic

Compound ) content less than 50 grams/ litre, of approved brand and

manufacture, including applying additional coats wherever required, to

achieve even shade and colour.

13.82.2 Two coats

13.48 Finishing with Deluxe Multi surface paint system for interiors and

exteriors using Primer as per manufacturers specifications :

ANUJ NAVNEET Digitally signed by ANUJ

CHACHA Date: 2022.10.14

Schedule of Quantities (Civil Items) 21

DSR 2021 Description ABTOTAL CPWD 2021 Enhanced Unit AMOUNT

No. uoQTY. /MR rate rate with

13.48.3 Painting Steel work with Deluxe Multi Surface Paint to

give an even shade. Two or more coat applied @ 0.90 ltr/

10 sqm over an under coat of primer applied @ 0.80 ltr/

10 sqm of approved brand and manufacture

13.114 Melamine polishing on wood work (one or more coat).

13.18 Neat cement punning.

13.24.1 Extra for plastering done on moulding, cornices or architraves including

neat finish to line and level:

13.61.1 Painting with synthetic enamel paint of approved brand and

manufacture to give an even shade: 467.47 131.45 139.77 sqm 65,338.28

Two or more coats on new work

13.106 Painting (one or more coats) with black Japan paint of approved brand

and manufacture to give an even shade.

16.1 Preparation and consolidation of sub grade with power road roller of 8

to 12 tonne capacity after excavating earth to an average of 22.5 cm

depth, dressing to camber and consolidating with road roller including 5000.00 180.50 191.93 sqm 9,59,650.00

making good the undulations etc. and re-rolling the sub grade and

disposal of surplus earthwith lead upto 50 metres.

16.46.1 Providing and filling in position rubberized bitumen hot sealing per cm

compound for sealing of expansion joints in roads / pavements all depth per

complete as per direction of the Engineer-in-Charge. 12800.00 7.50 7.97 cm width 1,02,016.00

16.41 Providing and laying seal coat over prepared surface of road with

bitumen heated in bitumen boiler fitted with the spray set spraying

using 98 kg of bitumen of grade VG - 10 and blinding surface with 0.90

cum of stone aggregate of 6.7 mm size (Passing 11.2 mm sieve and 14400.00 106.10 112.82 sqm 16,24,608.00

retained on 2.36 mm sieve) per 100 sqm of road surface, including

rolling and finishing with power road roller all complete.

16.31.1 Providing and applying tack coat using bitumen emulsion conforming

to IS:8887, using emulsion pressure distributer including preparing the

surface & cleaning with mechanical broom.

With rapid setting bitumen emulsion sqm

ANUJ NAVNEET Digitally signed by ANUJ

CHACHA Date: 2022.10.14

Schedule of Quantities (Civil Items) 22

DSR 2021 Description ABTOTAL CPWD 2021 Enhanced Unit AMOUNT

No. uoQTY. /MR rate rate with

16.54 Providing and laying Dense Graded Bituminous Macadam using

crushed stone aggregates of specified grading, premixed with

bituminous binder and filler, transporting the hot mix to work site by

tippers, laying with paver finisher equiped with electronic sensor to the

required grade, level and alignment and rolling with smooth wheeled,

vibratory and tandem rollers as per specifications to achieve the

desired compaction and density, complete as per specificatons and

directions of Engineer-in-Charge.

16.54.1 With bitumen of grade VG-30 @ 5% (percentage by weight of total mix)

and lime filler @ 2% (percentage by weight ofAggregate) prepared in

Batch Type Hot Mix Plant of 100-120 TPH capacity.

16.68 Providing and laying 60mm thick faciory made cement concrete

interlocking paver block of M -30 grade made by block making machine

with strong vibratory compaction, of approved size, design & shape,

laid in required colour and pattern over and including 50mm thick 3500.00 951.00 1011.20 sqm 35,39,200.00

compacted bed of coarse sand, filling the joints with line sand etc. all

complete as per the direction of Engineer-in-charge.

16.75 Providing and laying C.C. pavement of mix M-25 with ready mixed

concrete from batching plant. The ready mixed concrete shall be

laid and finished with screed board vibrator , vacuum dewatering

process and finally finished by floating, brooming with wire brush

etc. complete as per specifications and directions of Engineer-

incharge. (The panel shuttering work shall be paid for separately).

16.79 Providing, laying, spreading and compacting graded stone aggregate

(size range 53 mm to 0.075 mm ) to wet mix macadam (WMM)

specification including premixing the material with water at OMC in for

all leads & lifts, laying in uniform layers with mechanical paverfinisher

in sub- base / base course on well prepared surface and compacting

with vibratory roller of 8 to 10 tonne capacity to achievethe desired

density, complete as per specifications and directions of Engineer-in-

ANUJ NAVNEET Digitally signed by ANUJ

CHACHA Date: 2022.10.14

Schedule of Quantities (Civil Items) 23

DSR 2021 Description ABTOTAL CPWD 2021 Enhanced Unit AMOUNT

No. uoQTY. /MR rate rate with

16.93 Providing and placing in position 100 mm thick factory made machine

batched & machine mixed Precast RCC Rectangular Covers on drains

of footpath of various sizes, of M-25 grade cement concrete for RCC

work, including cost of centering, shuttering, reinforcement of 8 mm dia

TMT bars of Fe 500 grade @ maximum 100mm c/c on both ways ,

neat cement punning on finished surface, properly encased on all

edges with 1.6 mm thick , 100 mm wide MS sheet duly painted over

priming coat , reinforcement to be welded at edges with MS sheet and

providing 2 Nos. 12 mm dia bar for hooks etc i/c cost of cartage, all

leads & lift, handling at site etc. all complete as per direction of

Engineer-in-Charge.

21 ALUMINIUM WORK

21.1 Providing and fixing aluminium work for doors, windows,

ventilators/louvers and partitions with extruded built up standard tubular

sections/ appropriate Z sections/louver sections and other sections of

approved make conforming to IS: 733 and IS: 1285, fixing with dash

fasteners of required dia and size, including necessary filling up the

gaps at junctions, i.e. at top, bottom and sides with required EPDM

rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust

free, straight, mitred and jointed mechanically wherever required

including cleat angle, Aluminium snap beading for glazing / paneling,

C.P. brass / stainless steel screws, all complete as per architectural

drawings and the directions of Engineer-in-charge. (Glazing, paneling

and dash fasteners to be paid for separately) :

21.1.1 For fixed portion

21.1.1.3 Polyester powder coated aluminium (minimum thickness of polyester

powder coating 50 micron)

21.1.2 For shutters of doors, windows & ventilators including providing and

fixing hinges/ pivots and making provision for fixing of fittings wherever

required including the cost of EPDM rubber / neoprene gasket required

(Fittings shall be paid for separately)

21.1.2.3 Polyester powder coated aluminium (minimum thickness of polyester

powder coating 50 micron)

21.3.2 With float glass panes of 5 mm thickness (weight not less than 12.50

ANUJ NAVNEET Digitally signed by ANUJ

CHACHA Date: 2022.10.14

Schedule of Quantities (Civil Items) 24

DSR 2021 Description ABTOTAL CPWD 2021 Enhanced Unit AMOUNT

No. uoQTY. /MR rate rate with

9.147B Providing and fixing factory made uPVC white colour fixed glazed

windows/ ventilators comprising of uPVC multi-chambered frame and

mullion (where ever required) extruded profiles duly reinforced with

1.60 ± 0.2 mm thick galvanized mild steel section made from roll

forming process of required length (shape & size according to uPVC

profile), , uPVC

extruded glazing beads of appropriate dimension, EPDM gasket, G.I

fasteners 100 x 8 mm size for fixing frame to finished wall, plastic

packers, plastic caps and necessary stainless steel screws etc. Profile

of frame shall be mitred cut and fusion welded at all corners, mullion (if

required) shall be also fusion welded including drilling of holes for

fixing hardware's and drainage of water etc. After fixing frame the gap

between frame and adjacent finished wall shall be filled with weather

sealant over backer rod of required size and of approved quality, all

complete as per approved drawing & direction of Engineer-in-Charge.

(Single / double glass panes and silicon sealant shall be paid

separately). Variation in profile dimension in higher side shall be

accepted but no extra payment on this account shall be made.

Note: For uPVC frame, sash and mullion extruded profiles minus 5%

tolerance in dimension i.e. in depth & width of profile shall be

21.4 Providing and fixing double action hydraulic floor spring of approved

brand and manufacture conforming to IS : 6315, having brand logo

embossed on the body / plate with double spring mechanism and door

weight upto 125 kg, for doors, including cost of cutting floors,

embedding in floors as required and making good the same matching

to the existing floor finishing and cover plates with brass pivot and

single piece M.S. sheet outer box with slide plate etc. complete as

per the direction of Engineer-in-charge.

21.4.1 With stainless steel cover plate minimum 1.25 mm thickness

21.8 Filling the gap in between aluminium frame & adjacent

RCC/Brick/Stone work by providing weather silicon sealent over backer

rod of approved quality as per architectural drawings and direction of 750.00 85.25 90.65 Sqm 67,987.50

Engineer-In-Charge

Upto 5mm depth and 5mm width

ANUJ NAVNEET Digitally signed by ANUJ

CHACHA Date: 2022.10.14

Schedule of Quantities (Civil Items) 25

DSR 2021 Description ABTOTAL CPWD 2021 Enhanced Unit AMOUNT

No. uoQTY. /MR rate rate with

21.18 Providing and fixing 12mm thick frameless toughened glass door

shutter of approved brand and manufacture, including providing and

fixing top & bottom pivot & double acting hydraulic floor spring type

fixing arrangement and making necessary holes etc. for fixing required

door fittings, all complete as per direction of Engineer in charge (Door 12.36 4540.70 4828.15 Sqm 59,675.93

handle, lock and stopper etc. to be paid separately)

22 WATER PROOFING

22.3 Providing and laying water proofing treatment to vertical and horizontal

surfaces of depressed portions of W.C., kitchen and the like consisting

(i) Ist course of applying cement slurry @ 4.4 kg/sqm mixed\ with water

proofing compound conforming to IS 2645 in recommended

proportions including rounding off junction of vertical and horizontal

(ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand)

mixed with water proofing compound in recommended proportion

including rounding off junction of vertical and horizontal surface.

(iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7

kg. per sqm of area.

(iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of

PVC sheet should be 100 mm wide and pasted to each other with

bitumen @ 1.7 kg/sqm).

22.7 Providing and laying integral cement based water proofing treatment

including preparation of surface as required for treatment of roofs,

balconies, terraces etc consisting of following operations: a) Applying a

slurry coat of neat cement using 2.75 kg/sqm of cement admixed with

water proofing compound conforming to IS. 2645 and approved by

Engineer-in-charge over the RCC slab including adjoining walls upto

300 mm height including cleaning the surface before treatment.

ANUJ NAVNEET Digitally signed by ANUJ

CHACHA Date: 2022.10.14

Schedule of Quantities (Civil Items) 26

DSR 2021 Description ABTOTAL CPWD 2021 Enhanced Unit AMOUNT

No. uoQTY. /MR rate rate with

0 b) Laying brick bats with mortar using broken bricks/brick bats 25 mm

to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse

sand) admixed with water proofing compound conforming to IS : 2645

and approved by Engineer-in-charge over 20 mm thick layer of cement

mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water

proofing compound conforming to IS : 2645 and approved by Engineer-

in-charge to required slope and treating similarly the adjoining walls

upto 300 mm height including rounding of junctions of walls and slabs

c) After two days of proper curing applying a second coat of cement

slurry using 2.75 kg/ sqm of cement admixed with water proofing

compound conforming to IS : 2645 and approved by Engineer-in-

0 d) Finishing the surface with 20 mm thick jointless cement mortar of

mix 1:4 (1 cement :4 coarse sand) admixed with water proofing

compound conforming to IS : 2645 and approved by Engineer-in-

charge including laying glass fibre cloth of approved quality in top layer

of plaster and finally finishing the surface with trowel with neat cement

slurry and making pattern of 300x300 mm square 3 mm deep. e) The

whole terrace so finished shall be flooded with water for a minimum

period of two weeks for curing and for final test. All above operations to

be done in order and as directed and specified by the Engineer-in-

22.7.1 With average thickness of 120 mm and minimum thickness at khurra

22.26 Providing and applying of swellable type water stop tape, 19mm x

25mm thick in linear meter (expansive nature) for construction joints

treatment of RCC structure, such as raft slab, retaining walls, water

storage tank and at the junctions of raft slab with the retaining walls

etc.. After cleaning the surface, one coat of required primer for

swellable water stop tape shall be applied throughout the length of the

joint @3.78 litre per 240 running meter. Over the primed surface

swellable type water stop tape shall be placed. The work shall be

carried out all complete as per specification and the direction of the

engineer-in-charge. The product performance shall carry guaranteed

for 10 years against any leakage.

22 STRUCTURAL GLAZING ALUMINIUM COMPOSITE PANEL

ANUJ NAVNEET Digitally signed by ANUJ

CHACHA Date: 2022.10.14

Schedule of Quantities (Civil Items) 27

DSR 2021 Description ABTOTAL CPWD 2021 Enhanced Unit AMOUNT

No. uoQTY. /MR rate rate with

25.1 Providing and supplying aluminium extruded tubular and other

aluminium sections as per the architectural drawings and approved

shop drawings , the aluminium quality as per grade 6063 T5 or T6 as

per BS 1474,including super durable powder coating of 60-80 microns

conforming to AAMA 2604 of required colour and shade as approved

by the Engineer-in-Charge. ( The item includes cost of material such as 7200.00 370.45 393.90 sqm 28,36,080.00

cleats, sleeves, screws etc. necessary for fabrication of extruded

aluminium frame work. Nothing extra shall be paid on this account).

The weight of aluminium extruded section shall be taken for purpose of

25.2 Designing, fabricating, testing, protection, installing and fixing in

position semi (grid) unitized system of structural glazing (with open

joints) for linear as well as curvilinear portions of the building for all

heights and all levels, including:

(a) Structural analysis & design and preparation of shop drawings for

the specified design loads conforming to IS 875 part III (the system

must passed the proof test at 1.5 times design wind pressure without

any failure), including functional design of the aluminum sections for

fixing glazing panels of various thicknesses, aluminium cleats, sleeves

and splice plates etc. gaskets, screws, toggles, nuts, bolts, clamps etc.,

and weather silicone sealants, flashings, fire stop (barrier)- cum-smoke

seals, microwave cured EPDM gaskets for water tightness, pressure

equalisation & drainage and protection against fire hazard including:

(b) Fabricating and supplying serrated M.S. hot dip galvanised / 480.00 3111.35 3308.32 sqm 15,87,994.00

Aluminium alloy of 6005 T5 brackets of required sizes, sections and

profiles etc. to accommodate 3 Dimentional movement for achieving

perfect verticality and fixing structural glazing system rigidly to the

RCC/ masonry/structural steel framework

of building structure using stainless steel anchor fasteners/ bolts, nylon

seperator to prevent bimetallic contacts with nuts and washers etc. of

stainless steel grade 316, of the required capacity and in required

(c) Providing and filling, two part pump filled, structural silicone sealant

and one part weather silicone sealant compatible with the structural

silicone sealant of required bite size in a clean and controlled factory /

work shop environment, including double sided spacer tape, setting

blocks and backer rod, all of approved grade, brand and manufacture,

as per the approved sealant design, within and all around the perimeter

ANUJ NAVNEET Digitally signed by ANUJ

CHACHA Date: 2022.10.14

Schedule of Quantities (Civil Items) 28

DSR 2021 Description ABTOTAL CPWD 2021 Enhanced Unit AMOUNT

No. uoQTY. /MR rate rate with

25.3 Providing, assembling and supplying vision glass panels (IGUs)

comprising of hermetically-sealed 6-12- 6 mm insulated glass (double

glazed) vision panel units of size and shape as required and specified,

comprising of an outer heat strengthened float glass 6mm thick, of

approved colour and shade with reflective soft coating on surface # 2

of approved colour and shade, an inner Heat strengthned clear float

glass 6mm thick, spacer tube 12mm wide, dessicants, including

primary seal and secondary seal (structural silicone sealant) etc. all

complete for the required performances, as per the Architectural

drawings, as per the approved shop drawings, as specified and as

directed by the Engineer-in-Charge. The IGUs shall be assembled in

the factory/ workshop of the glass processor. (Payment for fixing of IGU

Panels in the curtain glazing is included in cost of item No.25.2) For

payment, only the actual area of glass on face # 1 of the glass panels 480.00 3377.50 3591.31 sqm 17,23,829.00

(excluding the areas of the grooves and weather silicone sealant)

provided and fixed in position, shall be measured in sqm. Coloured

tinted float glass 6mm thick substrate with reflective soft coating on

face # 2, + 12mm Airgap + 6mm Heat

Strengthened clear Glass of approved make having properties as

visible Light transmittance (VLT) of 25 to 35 %, Light reflection internal

10 to 15%, light reflection external 10 to 20 %, shading coefficient (0.25-

0.28) and U value of 3.0 to 3.3 W/ m2 degree K etc. The properties of

performance glass shall be decided by technical sanctioning authority

as per the site requirement.

25.4 Extra for openable side / top hung vision glass panels (IGUs) including

providing and supplying at site all accessories and hardwares for the

openable panels as specified and of the approved make such as heavy

duty stainless steel friction hinges, min 4 -point cremone

locking sets with stainless steel plates, handles, buffers etc. including

necessary stainless steel screws/ fasteners, nuts, bolts, washers etc. 50.00 3309.05 3518.53 sqm 1,75,927.00

all complete as per theArchitectural drawings, as per the approved

shop drawings, as specified and as directed by the Engineer-

ANUJ NAVNEET Digitally signed by ANUJ

CHACHA Date: 2022.10.14

Schedule of Quantities (Civil Items) 29

DSR 2021 Description ABTOTAL CPWD 2021 Enhanced Unit AMOUNT

No. uoQTY. /MR rate rate with

25.8 Design supply & installation of suspended Spider Glazing system

designed to withstand the wind pressure as per IS 875 (Part-III). The

Suspended System held with Spider Fittings of SS-316 Grade Steel of

approved manufacturer with glass panel having 12 mm thick clear

toughened glass held together with SS- 316 Grade Stainless steel

Spider & bolt assembly with laminated glass fins 21 mm thick. The

Glass fins and glass panel assembly shall be connected to Slab/

beams by means of SS- 316 Grade stainless steel brackets & Anchor

bolts and at the bottom using SS channel of 50x25x2mm using

fastener & anchor bolts, non staining weather sealants of approved

make, Teflon/ nylon bushes and separators to prevent bi-metallic

contacts, all complete to perform as per specification and approved

drawings. The complete system to be designed to accommodate

thermal expansion & seismic movements etc. The joints between glass

panels (6 to 8 mm) and gaps at the perimeter & in U channel of the

assembly to be filled with non staining weather sealant, so as to make

the entire system fully water proof & dust proof.

The rate shall include all design, Engineering and shop drawing

including approval from structural designer, labour, T&P, scaffolding,

other incidental charges including wastage, enabling temporary

services all fitting fixers nut bolts, washer, Buffer plates, fastener,

anchors, SS channel laminated glass etc. all complete. For the

purpose of payment, actual elevation area of Glazing including

thickness of joints and the portion of Glass panel inside the SS channel

shall be measured.

0020 Hydraulic Excavator with driver and fuel 96.00 0.00 9594.00 day 9,21,024.00

ANUJ NAVNEET Digitally signed by ANUJ

CHACHA Date: 2022.10.14

Schedule of Quantities (Civil Items) 30

DSR 2021 Description ABTOTAL CPWD 2021 Enhanced Unit AMOUNT

No. uoQTY. /MR rate rate with

Grand Total Schedule work 2848,93,999.79

Grand Total Schedule work 2848,93,999.79

1 Non-schedule items

NS-1 Providing and fixing PVC Door back buffer of approved quality & make

with necessary screws etc all complete. Size min. 40mm, dia 30mm 465.00 64.80 64.80 each 30,132.00

complete in all respect as per engineer in charge

NS-2 Providing and fixing bright finished brass/SS door back hanger (with

minimum 04 hook) with screws etc. complete in all respect as per 300.00 941.90 941.90 each 2,82,570.00

engineer in charge

NS-3.1 Providing and fixing stainless steel grade 304 sliding door bolts with

stainless steel nut and screws etc. complete as per approved sample

and direction of Engineer-in-charge.

NS-3.2 250 x 16mm (Weight should be not less than 600 gms without nuts and

NS-4 Providing and fixing stainless steel grade 304, bright/satin finished

tower bolts (barrel type) with stainless steel screws etc. complete as

per approved sample and direction of Engineer-in-charge.

NS-4.1 250 x 10mm (Weight should be not less than 320 gms without nuts and

NS-4.2 150 x 10mm (Weight should be not less than 270 gms without nuts and

NS-5 Supply and fixing of “SELF SUPPORTED” SECRET FIX STANDING

ROOFING SYSTEM IN 0.9 mm THICK AA 3004 ALUMINIUM ALLOY.

The general roof-construction shall comprise from Top to Bottom

including ALUMINIUM FLASHING IN 0.9 MM FOR ROOF complete in

all respect as per detailed technical specification and direction of

Engineer-in-charge

NS-6 Finishing walls with textured exterior coating pigmented/fumigated with

natural crushed stone granules compound with natural pigmented

stone as per the technical specification complete in all respect as per 2023.07 2830.00 2830.00 sqm 57,25,290.93

directions of engineer-in-charge.

NS-7 Providing and fixing 6mm reflective glazing in aluminium door, window,

ventilator shutters and partitions etc. with EPDM rubber / neoprene

gasket etc. complete as per the architectural drawings and the

directions of engineer-in-charge . (Cost of aluminium snap beading

shall be paid in basic item): (weight not less than 14.50 kg/sqm)

NS-8 Providing and fixing heavy duty domal Aluminium window lock of

minimum length 100mm) for sliding Aluminium window (two locks per

window) with necessary fitting etc. complete in all respect as per

direction of engineer in charge

ANUJ NAVNEET Digitally signed by ANUJ

CHACHA Date: 2022.10.14

Schedule of Quantities (Civil Items) 31

DSR 2021 Description ABTOTAL CPWD 2021 Enhanced Unit AMOUNT

No. uoQTY. /MR rate rate with

NS-9 Providing and laying Separation Membrane of impermeable plastic

sheeting of 125 micron thick under the RCC slab/VDC road including

nailing of the sheet with the shuttering/concrete layer complete in all 7460.00 38.30 38.30 sqm 2,85,718.00

respect as per the direction of engineer in charge

NS-10 Core Cutting with core cutter machine of required dia. In rcc Slab

including Grouting of Core Cutting hole with GP-2 cement after

layingof pipe , Complete in all resoect as per direction of Engineer

NS-12 Providing and fixing GI hexagonal chicken wire mesh of size 12mm

x22g at the junction of disimilar surfaces of brick R C C column by

beams and the like including necessary nails for fixing etc, complete all 2500.00 110.70 110.70 sqm 2,76,750.00

as per specification and direction of Engineer -in -charge for all floor at

ANUJ NAVNEET Digitally signed by ANUJ

CHACHA Date: 2022.10.14

Schedule of Quantities (Civil Items) 32

DSR 2021 Description ABTOTAL CPWD 2021 Enhanced Unit AMOUNT

No. uoQTY. /MR rate rate with

NS-13 Providing and fixing 16 mm diameter anchoring steel bar 120 cm long,

insert in each hole on rock for supported on RCC footing reinforcement

including making of hole 100 cm in rock and grouting of each hole with 140.00 622.90 622.90 each 87,206.00

GP-2 cement , Complete in all resoect as per direction of Engineer

NS-14 Supply and fixing of one cold room of size 8FTX8FTX8FT with desired

temperature range +2-(+8) degree C, complete as per detailed

technical specification (excluding furniture and other additional

accessories) and direction of engineer in charge

Total Non schedule items 216,52,723.48

GRAND TOTAL (SCHEDULE + NON SCHEDULE) 3065,46,723.27

GRAND TOTAL (SCHEDULE + NON SCHEDULE) 3065,46,723.27

ANUJ NAVNEET Digitally signed by ANUJ

CHACHA Date: 2022.10.14

Auditorium, Boys Hostel, Girls Hostel Training hall Jhansi

S.NO NAME OF SUB-HEAD

CPWD DSR 2021 M.R. TOTAL

I INTERNAL PLUMBING WORK 137,94,384.04 24,62,932.10 162,57,316.14

II EXTERNAL PLUMBING WORKS 93,53,884.08 - 93,53,884.08

ANUJ NAVNEET Digitally signed by ANUJ

CHACHA Date: 2022.10.14

SCHEDULE OF QUANTITIES FOR PLUMBING WORKS

INTERNAL PLUMBING WORKS

SL. DSR NO. DESCRIPTION UNIT QTY Enhanced D.S.R. 2021 M.R.

NO RATE with AMOUNT AMOUNT

1 17.1 Providing and fixing water closet squatting pan ( Indian

type W.C. pan ) with 100mm sand cast Iron P or S trap,

10 litre low level white P.V.C. flushing cistern with manually

controlled device (handle lever) conforming to IS:7231,

Parryware/Hindware/Seabird/Orient (Coral) with all fittings

and fixtures complete including cutting and making good

the walls and floors wherever required.

17.1.1 White Vitreous china Orissa pattern W.C. pan of size each 23.00 1,41,388.82

580x440mm with integral type foot rests

2 17.2 Providing and fixing white vitreous china pedestal type

water closet (European type W.C. pan) with seat and lid,

10 litre low level white P.V.C. flushing cistern with manually

controlled device (handle lever), conforming to IS : 7231,

Parryware/ Hindware/ Seabrid /Orient (Coral) with all

fittings and fixtures complete including cutting and making

good the walls and floors wherever required :

17.2.2 W.C. pan with ISI marked black solid plastic seat and lid each 51.00 2,94,287.85

3 17.78 Providing and fixing white vitreous china extended wall each 26.00 3,60,407.84

mounting water closet of size 780x370x690 mm of

approved shape including providing & fixing white vitreous

china cistern with dual flush fitting, of flushing capacity 3 13861.84

litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat

cover, and cistern fittings, nuts, bolts and gasket etc

4 17.7 Providing & fixing white vitreous china wash basin with C.I.

brackets painted white, 15 mm C.P. brass pillar taps, C.P.

brass chain with rubber plug, 32mm C.P. brass waste of

standerd pattern including cutting & making good the walls

wherever required.

17.7.1 a)White Vitreous China Wash basin size 630x450 mm with each 85.00 3,06,572.05

a pair of 15 mm C.P. brass pillar taps 3606.73

5 17.28 Providing and fixing P.V.C. waste pipe for sink or wash

basin including P.V.C. waste fittings complete.

ANUJ NAVNEET Digitally signed by ANUJ

17.28.1 Semi rigid pipe

CHACHA Date: 2022.10.14

6 17.31 Providing and fixing 600x450mm bevelled edge mirror of each 85.00 1,27,540.80

superior glass (of approved quality) complete with 6mm

thick hard board ground fixed to wooden cleats with C.P. 1500.48

brass screws and washers complete.

7 17.10 Providing and fixing Stainless Steel AISI 304(18/8) kitchen

sink as per IS : 13983 with C.I. brackets and stainless steel

plug 40mm including painting of fittings and brackets,

cutting and making good the walls wherrerever required.

7.1 17.10.1.3 Kitchen sink with drain board Size 510x1040 mm bowl each 1.00 6,673.31

7.1 17.10.2.2 Kitchen sink without drain board Size 610x460 mm bowl each 2.00 7,098.30

8 8.10 Providing and fixing stone slab table rubbed, edges

rounded and polished of size 75x50cm deep and 1.8cm

thick fixed in Urinal partitions by cutting a chase of

appropriate width with chase cutter and embedding the

stone in the chase with epoxy grout or with cement

concrete 1:2:4 (1cement: 2coarse sand: 4graded stone

aggregate 6mm nominal size) as per direction of Engineer-

in-charge and finished smooth.

8.10.2 Granite Stone of approved shade Sqm. 52.00 3767.13 1,95,890.76

CP Brass fittings

9 18.21 Providing and fixing unplasticised PVC connection pipe with

18.21.2 45 cm length

10 17.16A Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible each 79.00 25,145.70

tube upto 1 metre long with S.S. triangular plate to

Eureopean & Wall moutain type W.C. of quality and make 318.30

as approved by Engineer - in - charge.

11 18.49 Providing and fixing C.P. brass bib cock of approved quality

conforming to IS:8931

ANUJ NAVNEET Digitally signed by ANUJ

CHACHA Date: 2022.10.14

12 18.51 Providing and fixing C.P. brass long body bib cock of

approved quality conforming to IS standards and weighing

not less than 690 gms. ( for sink)

13 18.53 Providing and fixing C.P. brass angle valve for basin mixer

and gyser points of approved quality conforming to

4 17.22.B Providing and fixing CP Brass Single lever telephonic wall

mixer of quality & make as approved by Engineer in

charge. (For bath)

15 mm diameter each 0.00 6506.53 -

14 18.22 Providing and fixing C.P. brass shower rose with 15 or

15 18.52 Providing and fixing C.P. brass stop cock (concealed) of

standard design and of approved make conforming to

16 17.22.A Providing and fixing CP Brass 32mm size Bottle Trap of each 104.00 98,004.40

approved quality & make and as per the direction of 942.35

Engineer-in-charge.

17 17.71 Providing and fixing PTMT liquid soap container 109 mm each 38.00 5,911.28

wide, 125 mm high and 112 mm distance from wall of

standard shape with bracket of the same materials with

snap fittings of approved quality and colour, weighing not

less than 105 gms.

18 17.73 Providing and fixing PTMT towel rail complete with brackets

fixed to wooden cleats with CP brass screws with concealed

fittings arrangement of approved quality and colour.

17.73.1 450 mm long towel rail with total length of 495 mm, 78 each 70.00 42,693.70

mm wide and effective height of 88 mm, weighing not less 609.91

19 Providing & fixing soil, waste and vent pipes.

Hubless centrifugally cast (spun) iron pipes epoxy coated

inside & outside IS:15905

19.1 17.35.1.3 a) 100mm dia centrifugally cast iron S & S pipe. Rm. 1336.00 15,07,582.48

ANUJ NAVNEET Digitally signed by ANUJ

CHACHA Date: 2022.10.14

19.2 17.35.2.3 b) 75mm dia centrifugally cast iron S & S pipe. Rm. 1390.00 12,82,233.30

20 Providing & fixing M.S. holder bat clamps of approved

design to sand cast iron/centrifugally cast (Spun) iron S & S

pipe embeded in & including cement concrete blocks

10x10x10cm. of 1:2:4 mix (1 cement : 2 coarse : 4 graded

stone aggregate 20mm nominal

size). Including cost of cutting holes & making good the

21 Providing and fixing bend of required degree with access

door, insertion rubber washer 3mm thick, bolts and nuts

21.1 17.38.1.3 a) 100mm Hubless centrifugally cast (spun) iron Each 40.00 23,426.80

epoxycoated inside & outside as per IS:15905

21.2 17.38.2.3 b) 75mm Hubless centrifugally cast (spun) iron Nos. 40.00 18,714.00

epoxycoated inside & outside as per IS:15905

22 Providing and fixing plain bend of required degree.

22.1 17.39.1.3 a) 100mm Hubless centrifugally cast (spun) ironpipes Each 40.00 14,718.40

epoxy coated inside & outside IS:15905

22.2 17.39.2.3 b) 75mm Hubless centrifugally cast (spun) ironpipes epoxy Nos. 40.00 10,407.60

coated inside & outside IS:15905

Providing and fixing heal rest sanitary bend

17.40.1.2 100mm Sand Cast iron S&S as per IS-3989 Nos. 40.00 467.59 18,703.60

17.40.2.2 75mm Sand Cast iron S&S as per IS-3989 Nos. 40.00 430.90 17,236.00

23 Providing and fixing double equal plain junction of required

Hublesscentrifugallycast(spun)ironpipesepoxycoatedinside& 766.32

outside IS:15905

23.2 17.42.2.3 75x75x75x75 MM Hubless centrifugally Nos. 40.00 16,951.20

cast(spun)ironpipesepoxycoatedinside&outside IS:15905 423.78

24 Providing and fixing single equal plain junction of required

degree with access door, insertion rubber washer 3 mm

thick, bolts and nuts complete.

25 Providing and fixing centrifugaly cast iron single equal plain

junction of required degree.

ANUJ NAVNEET Digitally signed by ANUJ

CHACHA Date: 2022.10.14

25.1 17.44.1.3 100x100x100mm Hubless centrifugally cast (spun) iron Nos. 120.00 73,177.20

epoxycoated inside & outside as per IS:15905

25.2 17.44.2.3 75x75x75mm Hubless centrifugally cast (spun) iron Nos. 60.00 20,304.00

epoxycoated inside & outside as per IS:15905

26 Providing and fixing double unequal junction of required

17.46.1.3 100X100X75X75Xmm Hubless centrifugally cast (spun) Nos. 60.00 36,588.60

iron epoxy coated inside & outside as per 609.81

27 Providing and fixing single unequal junction of required

degree with access door, insertion rubber washer 3 mm

thick, bolts and nuts complete :

28 Providing and fixing single unequal plain invert branch of

required degree :

17.52.1.3 100x100x75mm Hubless centrifugally cast (spun) iron Nos. 60.00 39,150.00

epoxy coated inside & outside as per 652.50

29 Providing and fixing door piece, insertion rubber washer

3mm thick, bolts & nuts complete :( c.o.p.)

30 Providing and fixing cast iron terminal guard.

30.1 17.56.1.3 100 mm Hubless centrifugally cast (spun) iron Each 148.00 62,885.20

epoxy coated inside & outside as per 424.90

31 Providing and fixing shielded coupling for Hubless

centrifugally cast iron pipe

31.1 17.57A.1.1 a) 100mm dia. SS 304 grade coupling with EPDM rubber No. 421.00 1,81,880.42

31.2 17.57A.2.1 b) 75mm dia. SS 304 grade coupling with EPDM rubber No. 466.00 1,80,905.86

32 Providing and fixing trap of self cleansing design with

screwed down or hinged grating with or without vent arm

complete, including cost of cutting and making good the

walls and floors :

32.1 17.60.1.3 a) 100mm inlet & 100mm outlet. Hubless centrifugally cast No. 210.00 1,69,894.20

(spun) iron epoxy coatedinside & outside as per IS:15905 809.02

32.2 17.60.2.3 a) 100mm inlet & 75mm outlet. Hubless centrifugally cast No. 170.00 1,00,043.30

(spun) iron epoxy coatedinside & outside as per IS:15905 588.49

ANUJ NAVNEET Digitally signed by ANUJ

CHACHA Date: 2022.10.14

33 19.2. Providing and laying cement concrete 1:5:10(1 cement : 5

coarse sand : 10 graded stone aggregate 20mm nominal

size) around P.V.C Soil and waste pipe including bed

concrete as per standard design(embedded in the flooring /

34 12.41 Providing and fixing on wall face unplasticised-Rigid PVC

rain water pipes conforming to IS: 13592 Type A including

jointing with seal ring conforming to IS: 5382 leaving

10mm gap for thermal expansion.

35 12.42 Providing and fixing on wall face unplasticised PVC moulded

fittings/accessories for unplasticised Rigid PVC rain water

pipes conforming to IS:13592 Type A including jointing

with seal ring conforming to IS:5382 leaving 10mm gap for

thermal expansion.

12.42.1 Coupler

12.42.5.2 Bend 87.5 degree

12.42.6 Shoe (Plain)

36 12.44 Providing and fixing to the inlet mouth of rain water pipe Each 129.00 6,569.97

cast iron grating 15 cm diameter and weighing not less 50.93

than 440 grams.

37 12.43 Providing and fixing unplasticised-PVC pipe clips of

approved design to unplasticised-PVC rain water pipes by

means of 50x50x50 mm hard wood plugs, screwed with MS

screws of required length including cutting brick work and

fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and

making good the wall etc. complete.

38 12.22 Making khurras 45x45 cm with average minimum thickness Each 49.00 13,890.52

of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand :

4 graded stone aggregate of 20 mm nominal size) over PVC

sheet 1m x 1 m x 400 micron, finished with 12 mm cement 283.48

plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat

cement,punning,rounding the edges and making and

finishing the outlet complete.

ANUJ NAVNEET Digitally signed by ANUJ

CHACHA Date: 2022.10.14

39 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC)

pipes, having thermal stability for hot & cold water supply

including all CPVC plain & brass threaded fittings i/c fixing

the pipe with clamps at 1.00m spacing. This includes

jointing of pipes & fittings with one step CPVC solvent

cement and the cost of cutting chases and making good the

same including testiang of joints complete as per direction

of Engineer in Charge.

40 Concealed work including cutting chases and making good

40.1 18.8.2 20mm dia nominal outer dia pipes Rm. 2384.00 546.27 13,02,307.68

40.2 18.8.3 25mm dia nominal outer dia pipes Rm. 2086.00 559.35 11,66,804.10

40.3 18.8.4 32mm dia nominal outer dia pipes Rm. 400.00 757.87 3,03,148.00

41 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC)

pipes, having thermal stability for hot & cold water supply,

including all CPVC plain & brass threaded fittings, including

fixing the pipe with clamps at 1.00 m spacing. This includes

jointing of pipes & fittings with one step CPVC solvent

cement and testing of joints complete as per direction of

Engineer in Charge.

Internal work-Exposed on wall

41.1 18.7.1 15mm dia nominal bore Metre 0.00 272.10 -

41.6 18.7.6 50mm dia nominal bore Metre 80.00 985.68 78,854.40

Providing and fixing GI pipes complete with GI fittings

and clamps, including cutting and making good walls

etc. ( for wash basin waste )

18.10.4 32mm dia nominal bore Metre 155.00 599.28 92,888.40

43 18.17 Providing and fixing gun metal gate valve with wheel of

approved quality.

43.1 18.17.1A 20mm dia nominal bore Each 40.00 490.98 19,639.20

43.7 18.17.6 80mm dia nominal bore Each 0.00 2368.62 ANUJ NAVNEET Digitally

- signed by ANUJ

CHACHA Date: 2022.10.14

44 18.18 Providing and fixing ball valve (brass) of approved quality,

High or low pressure, with plastic floats complete :

45 18.48 Providing and placing on terrace (at all floor levels)

polyethylene water storage tank, IS : 12701 marked, with

cover and suitable locking

arrangement and making necessary holes for inlet, outlet

and overflow pipes but without fittings and the base

support for tank.

Capcity in Per Liters per litre 80000.00 10.31 8,24,800.00

46 18.53A Providing and fixing C.P. Brass extension nipple (size each 320.00 20,995.20

15mmx50mm) of approved make and quality as per 65.61

direction of Engineer-in-charge.

47 2.10 Excavating trenches of required width for pipes, cables etc.

including excavation for sockets and dressing of sides,

ramming of bottoms, depth upto 1.5m including getting out

the excavated soil, and then returning the soil as required,

in layers not exceeding 20cm in depth including

consolidating each deposited layer by ramming, watering

etc. and disposing of surplus excavated soil as directed,

within a lead of 50m.

2.10.1 All kinds of soil

2.10.1.2 Pipes, cables etc. exceeding 80mm dia but not exceeding metre 180.00 79,878.60

48 19.1 Providing, laying and jointing glazed stoneware pipes grade

'A' with stiff mixture of cement mortar in the proportion of

1:1 (1 cement : 1 fine sand) including testing of joints etc.

49 19.2 Providing and laying cement concrete 1:5:10 (1 cement: 5

coarse sand : 10 graded stone aggregate 40mm nominal

size) all round S.W. pipes including bed concrete as per

standard design

50 19.6 Providing and laying Non pressure NP 2 class (light duty)

RCC pipe with collars jointed with stiff mixture of

cement mortar in the proportion of 1:2 (1cement : 2 fine

sand ) including testing of joints etc. complete.

ANUJ NAVNEET Digitally signed by ANUJ

CHACHA Date: 2022.10.14

51 Providing and laying cement concrete 1:5:10 (1 cement: 5

coarse sand : 10 graded stone aggregate 40mm nominal

size) upto the haunches of pipes including bed concrete as

per standard design

52 19.4 Providing and fixing square-mouth S.W. gully trap grade‘A’

complete with C.I. grating, brick masonry chamber with

water tight C.I. cover with frame of 300 x300 mm size

(inside) the weight of cover to be not less than 4.50 kg and

frame to be not less than 2.70 kg as per standard design

19.4.2 150 x 100 mm size P type

19.4.2.2 With Sewer bricks conforming to IS : 4885 each 29.00 2582.18 74,883.22

53 19.7 Constructing brick masonry manhole in cement mortar 1:4

(1 cement :4 coarse sand) RCC top slab with 1:2:4 mix (1

cement :2 coarse sand :4 graded stone aggregate 20mm

nominal size), foundation concrete 1:4:8 mix (1 cement :4

coarse sand :8 graded stone aggregate 40mm nominal

size) inside plastering 12mm thick with cement mortar 1:3

(1 cement :3 coarse sand) finished with floating coat fo

neat cement and making channels in cement concrete

1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate

20mm nminal size) finished with a floating coat of neat

cement complete as per standard design.

54 19.7.1 Inside size 90x80cms and 45cms deep including CI cover

with frame (light duty) 455x610mm internal diamensions

total weight of cover and frame to be not less than 38 kg

(weight of cover 23 kg and weight of frame 15kg).

19.7.1.1 With FPS bricks of class designation 75 (i) For Sewer Line each 52.00 6,46,201.92

55 Extra for depth for manholes:

19.8.1.1 Size 90x80cm with With common burnt clay FPS (non metre 50.00 4,32,098.00

modular) bricks of class designation 7.5 8641.96

56 19.15 Providing M.S. foot rests including fixing in manholes with

20x20x10 cm cement concrete blocks 1:3:6 (1 cement:3

coarse sand :6graded stone aggregate 20 mm nominal

size) as per standard design

19.15.1 With 20x20 mm square bar each 68.00 490.56 33,358.08

Non scheduled items ANUJ NAVNEET Digitally signed by ANUJ

CHACHA Date: 2022.10.14

1 NS-1 Providing and fixing white vitreous china flat back urinal of each 59.00 10030.90 5,91,823.10

approx. size 600 x 390 x 370 mm having spreader/angle

valve for flushing with water, having water inlet from back

side, including bottle trap and fixing to wall with suitable

brackets all as per manufacturers specification and

direction of Engineer-in-charge

2 NS-2 Providing and fixing basin/sink mixture with swan neck spout Nos. 100.00 2421.10 2,42,110.00

(left/right) and aerator complete in all respect as per direction of

engineer-in-charge

3 NS-3 Providing and fixing of overhead SS shower arm of Nos. 70.00 352.20 24,654.00

minimum 200 mm length with wall flangecomplete in all

respect as per direction of EIC.

4 NS-4 Providing and fixing white vitreous china Handicapped toilet Nos. 5.00 22582.20 1,12,911.00

consisting of one piece EWC S trap 300 mm one hand rail

and one grab bar with suitable brackets all as per

manufacturers specification and direction of Engineer-in-

5 NS-5 Providing and fixing CP Brass pillar cock single lever of 15 each 40.00 2127.60 85,104.00

mm nominal bore, 150 mm long foam flow, weighing not

less than 120 gms complete

6 NS-6 Supply and installation of water storage cooler cum Purifier Nos. 10.00 140633.00 14,06,330.00

system, made by SS 304 grade top and heavy duty

galvanized steel frame. With stages 1. Particulate filter, 2.

Pre carbon filter, 3. Anti scalant cartridge, 4. sediment

filter, 5. RO membrane-80 GPDx4 nos, 6. post carbon filter

and 7. UV lamps-8watts. With purifying capacity 50 litre

per hour and storage capacity 80 litres, ADA Compliant,

size 640 mm x 450mm x 1350mm approx, flexible bubbler

guard , input pressure 0.6 to 2 kg/sqcm, refridgerant HFC

R134a, suitable for 220-230v/50-60 hz A/C Supply

Complete with all accessories+D233, and to be placed at

different location of buidling. As per Enginner Incharge

ANUJ NAVNEET Digitally signed by ANUJ

CHACHA Date: 2022.10.14

SCHEDULE OF QUANTITIES FOR PLUMBING WORKS

EXTERNAL PLUMBING WORKS

SOR/DSR A AMOUNT

S.N. DESCRIPTION QTY. UNIT RATE with D.S.R AMOUNT

I EXTERNAL SEWERAGE SYSTEM

Excavating trenches in all kinds of soil of

required width for pipes. including excavation

for sockets and dressing of sides, ramming of

bottoms, including getting out the excavated

soil & then returning the soil as required, in

1 layers not exceeding 20 cm in depth

including consolidating each deposited layer

by ramming, watering, etc & disposing of

surplus excavated soil as directed within a

up to 1.50 m depth

2.10.1.2 D.S.R Pipes 80 mm to 300 mm diameter 1150.0 metre 443.77 5,10,335.50

1.50 m to 3.00 m depth

2.11 D.S.R Pipes 80 mm to 300 mm diameter 400.0 metre 135.04 54,016.00

2 Open timbering in trenches including

shuttering and shoring complete.

(Measurement to be taken of the face area

2.20.1 D.S.R Depth not exceeding 1.5 meter 3450.0 Sqm 72.89 2,51,470.50

3 Providing and laying Non pressure NP 2

class (light duty) RCC pipe with collars

jointed with stiff mixture of cement mortar

in the proportion of 1:2 (1cement : 2 fine

sand ) including testing of joints etc.

ANUJ NAVNEET Digitally signed by ANUJ

CHACHA Date: 2022.10.14

4 Providing and laying cement concrete 1:5:10

(1 cement: 5 coarse sand : 10 graded stone

aggregate 40mm nominal size) upto the

haunches of pipes including bed concrete as

per standard design

5 19.7 D.S.R Constructing brick masonry manhole in

cement mortar 1:4 (1 cement :4 coarse

sand) RCC top slab with 1:2:4 mix (1 cement

:2 coarse sand :4 graded stone aggregate

20mm nominal size), foundation concrete

1:4:8 mix (1 cement :4 coarse sand :8

graded stone aggregate 40mm nominal size)

inside plastering 12mm thick with cement

mortar 1:3 (1 cement :3 coarse sand)

finished with floating coat fo neat cement and

making channels in cement concrete 1:2:4 (1

cement :2 coarse sand :4 graded stone

aggregate 20mm nminal size) finished with a

floating coat of neat cement complete as per

standard design.

ANUJ NAVNEET Digitally signed by ANUJ

CHACHA Date: 2022.10.14

6 19.7.1 D.S.R Inside size 90x80cms and 45cms deep

including CI cover with frame (light duty)

455x610mm internal diamensions total

weight of cover and frame to be not less than

38 kg (weight of cover 23 kg and weight of

With common burnt clay FPS (non modular)

bricks of class designation 75

7 19.8.1.1 D.S.R Extra for depth for manholes: 8

Size 90x80cm with With common burnt clay 1

FPS (non modular) bricks of class designation 2 8641.96

8 19.7.2 D.S.R Inside size 90x120cms and 90cms deep

including CI cover with frame (MEDIUM duty)

455x610mm internal diamensions total

weight of cover and frame to be not less than

116 kg (weight of cover 58 kg and weight of

With common burnt clay FPS (non modular)

bricks of class designation 75

9 19.8.2.1 D.S.R Extra for depth for manholes:

Size 90x120cm with With common burnt clay 7

FPS (non modular) bricks of class designation 4 10361.12

ANUJ NAVNEET Digitally signed by ANUJ

CHACHA Date: 2022.10.14

10 19.16 D.S.R Providing orange colour safety foot rests of

minimum 6 mm thick plastic encapsulated as

per IS:10910 on 12 mm dia steel bar

conforming to IS:1786 having minimum

cross section as 23 mm x 25 mm and over all

minimum length 263 mm and width as 165

mm with minimum 112 mm space between

protruded legs having 2 mm thread on top

surface by ribbing or chequering besides

necessary and adequate anchoring

projections on tail length on 138 mm as per

standard drawing and suitable to with stand 517.94

the bend test and chemical resistance test as

per specifications and having manufacture's

permanent identification mark to be visible

even after fixing, including fixing in manholes

with 30x20x15 cm cement concrete block

1:3:6 (1 cement : 3 coarse sand : 6 graded

stone aggregate 20 mm nominal size)

complete as per design.

II EXTERNAL RAIN WATER DRAINAGE

11 Excavating trenches in all kinds of soil of

required width for pipes. including excavation

for sockets and dressing of sides, ramming of

bottoms, including getting out the excavated

soil & then returning the soil as required, in

layers not exceeding 20 cm in depth

including consolidating each deposited layer

by ramming, watering, etc & disposing of

surplus excavated soil as directed within a

up to 1.50 m depth

2.10.1.2 D.S.R Pipes 80 mm to 300 mm diameter 800.00 metre 443.77 3,55,016.00

12 Providing and laying Non pressure NP 2

class (light duty) RCC pipe with collars

jointed with stiff mixture of cement mortar

in the proportion of 1:2 (1cement : 2 fine

sand ) including testing of joints etc. ANUJ NAVNEET Digitally signed by ANUJ

complete. CHACHA Date: 2022.10.14

13 Providing and laying cement concrete 1:5:10

(1 cement : 5 coarse

sand : 10 graded stone aggregate 40 mm

nominal size) all-round

S.W. pipes including bed concrete as per

standard design :

14 19.7 D.S.R Constructing brick masonry manhole in

cement mortar 1:4 (1 cement :4 coarse

sand) RCC top slab with 1:2:4 mix (1 cement

:2 coarse sand :4 graded stone aggregate

20mm nominal size), foundation concrete

1:4:8 mix (1 cement :4 coarse sand :8

graded stone aggregate 40mm nominal size)

inside plastering 12mm thick with cement

mortar 1:3 (1 cement :3 coarse sand)

finished with floating coat fo neat cement and

making channels in cement concrete 1:2:4 (1

cement :2 coarse sand :4 graded stone

aggregate 20mm nminal size) finished with a

floating coat of neat cement complete as per

standard design.

15 19.7.1 D.S.R Inside size 90x80cms and 45cms deep

including CI cover with frame (light duty)

455x610mm internal diamensions total

weight of cover and frame to be not less than

38 kg (weight of cover 23 kg and weight of

With common burnt clay FPS (non modular) 1

19.7.1.1 D.S.R bricks

(i) For of classLine

Sewer designation 75 205.00 each 1 12426.96 25,47,526.80

16 19.8.1.1 D.S.R Extra for depth for manholes:

Size 90x80cm with With common burnt clay 8

FPS (non modular) bricks of class designation 1 8641.96

ANUJ NAVNEET Digitally signed by ANUJ

CHACHA Date: 2022.10.14

17 19.16 D.S.R Providing orange colour safety foot rests of

minimum 6 mm thick plastic encapsulated as

per IS:10910 on 12 mm dia steel bar

conforming to IS:1786 having minimum

cross section as 23 mm x 25 mm and over all

minimum length 263 mm and width as 165

mm with minimum 112 mm space between

protruded legs having 2 mm thread on top

surface by ribbing or chequering besides

necessary and adequate anchoring

projections on tail length on 138 mm as per

standard drawing and suitable to with stand

the bend test and chemical resistance test as 300.00 each 517.94 1,55,382.00

per specifications and having manufacture's

permanent identification mark to be visible

even after fixing, including fixing in manholes

with 30x20x15 cm cement concrete block

1:3:6 (1 cement : 3 coarse sand : 6 graded

stone aggregate 20 mm nominal size)

complete as per design.

ANUJ NAVNEET Digitally signed by ANUJ

CHACHA Date: 2022.10.14

Auditorium, Boys Hostel, Girls Hostel Training hall Jhansi

Sl. No. System Description DSR 2019 Amount NS Amount Total

ANUJ NAVNEET Digitally signed by ANUJ

CHACHA Date: 2022.10.14

SCHEDULE OF QUANTITIES HVAC ITEMS

DSR HVAC-2019 and E&M - 2018 NS DSR-2019

S. No Description

Unit Qty NS Rate Amount DSR 2019 Rate with Amount

Variable Refrigerant Volume / Flow Air-conditioning System

DSR 1 Supply Installation, Testing&Commissioning of modular type Variable Refrigerant Flow/ Variable Per HP 228 16,415.00 17,454.16 39,79,548.48

Refrigerant Volume air cooled Outdoor units suitable for cooling and heating, having all

hermetically sealed inverter type Scroll Compressor(s), minimum two compressors for above

14HP modules, microprocessor based Controller, top discharge type condensing unit(s), with

R410A Refrigerant, vibration isolators, with suitable foundationet c.complete asrequired. Theunit

shall deliver theratedcapacityat AHRI Conditions and workevenat 50°C

ambienttemperaturewithouttripping. Theunitshallbesuitabletoworkon400V+/-

10%,3Phase,50HzACpowersupply. Theunit

shallbefilledwithfirstchargeoftherefrigerantandreadyforuseasrequired. TheCOPatAHRI conditions

shall not be less than 3.1 and IEER not less than 6.5 .

Indoor Units (Ceiling Mounted Low / Medium / High Static Ductable , Hiwall &

Cassette Units)

DSR 3 Supply, Instalaltion, testing and commissioning of Indoor units equipped with pre- filter,

fan section with suitable static fan, multispeed motor, coil section with DX coil, outer

cabinet, drain pan, insulation, pipe connections etc. of various

capacities as per specifications and drawings.

High Static Ductable Unit (minimum 110 pascal external static pressure)

REFRIGERANT PIPING, DRAIN PIPING AND INSULATION WORK

Refrigerant Piping for VRV / VRF System

DSR 7.5 Supply, installation, testing and commissioning of interconnecting high pressure copper

refrigerant piping work suitable for refrigerant R 410A duly insulated with XLPE Class O plain

type tubular insulation between indoor & outdoor units as per specifications. External

refrigerant piping shall be laid on GI covered perforated cable trays. Piping inside occupied area

& vertical shaft inside the AHU Room shall be supported using GI hangers. Pipe upto 19.1 mm

shall have 13 mm and above shall have

19 mm insulation.

Note:- Indoor & Outdoor Unit Location has been shown on the drawing. Sizes of refrigerant

piping will vary from manufacturer to manufacturer. AC contrcator has to

estimate the length & sizes as per their equipments.

(a)41.27mmdia(OD)(Harddrawn)withtubethickness1.62mmwith19mm thick insulation meter 40.00 - 1,639.22 -2,247.00 1,309.00 1,391.87 55,674.80

(b)34.9mmdia(OD)(Harddrawn)withtubethickness1.62mmwith19mm thick insulation meter 40.00 - 1,350.99 -1,852.00 1,230.00 1,307.87 52,314.80

(c)28.58mmdia(OD)(Harddrawn)withtubethickness1.2mmwith19mm thick insulation meter 50.00 - 1,109.42 -1,521.00 1,108.00 1,178.14 58,907.00

(d)22.2mmdia(OD)(Harddrawn)withtubethickness1.2mmwith19mm thick insulation meter 50.00 - 804.71 -1,103.00 865.00 919.76 45,988.00

(e)19mmdia(OD)(Harddrawn)withtubethickness1.2mmwith19mmthick insulation meter 40.00 - 637.26 -873.00 707.00 751.76 30,070.40

(f) 15.86mmdia(OD)(Softdrawn)withtubethickness1.2mmwith19mm thick insulation meter 50.00 - 611.18 -838.00 588.00 625.22 31,261.00

(g) 12.7mmdia(OD)(Softdrawn)withtubethickness1.2mmwith19mm thick insulation meter 50.00 - 482.16 -661.00 466.00 495.50 24,775.00

(h) 9.5mmdia(OD)(Softdrawn)withtubethickness1.2mmwith19mmthick insulation meter 35.00 - 458.83 -629.00 331.00 351.95 12,318.25

(i) 6.4mmdia(OD)(Softdrawn)withtubethickness1.2mmwith19mmthick insulation meter 35.00 - 402.56 -552.00 245.00 260.51 9,117.85

Ducting (DSR E&M 2022)

ANUJ NAVNEET Digitally

CHACHA Date: 2022.10.14

S. No Description

Unit Qty NS Rate Amount DSR 2019 Rate with Amount

DSR 16.12.1 Supply, installation, balancing and commissioning of site fabricated GSS sheet metal

rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers,

vanes, hangers, supports etc. as per approved drawings and specifications of

following sheet thickness complete as required.

Duct Insulation

DSR 16.23 Supplying and fixing of following thickness duly laminated aluminum foil of mat finish closed cell

Nitrile rubber (class “O”) insulation on existing duct after applying two coats of cold setting

adhesive (CPRX compound). The joints shall sealed with 50 mm wide and 3 mm thick self

adhesive nitrile rubber tape insulation complete as per

specifications and as required.

Acoustic Lining of Duct

DSR 16.21 Supply and fixing of acoustic lining of supply air duct and plenum with 25 mm thick resin 752.82

bonded glass wool having density of 32 kg/m³, with 25 mm X 25 mm GI section of

1.25 mm thick, at 600 mm centre to centre covered with Reinforced Plastic tissue paper and 100.00 - -

0.5 mm thick perforated aluminum sheet fixed to inside surface of ducts with cadmium plated nuts,

bolts, stick pins, CPRX compound etc. complete as required and

as per pecifications.

AHU Room Lining

DSR 16.22 Supplying, fixing acoustic lining on wall and ceiling of AHU rooms with 50mm thick, density 1,306.80

32 kg/cu.m resin bonded glass fiber insulation friction fixed in 610mm x 610 mm frame work

made of 25X50X50X50X25 mm made out of 0.6mm thick GI sheet U shaped channel and Sqm. 75.00 - - 1,229.00 98,010.00

covered with reinforced fiber glass tissue and finished with 0.80 mm perforated aluminium

sheet etc. complete as required and as per specifications.

Grills / Diffusers

Supply, installtion and testing of Powder coated Aluminium extruded grills /

diffusers as per specifications given in tender and of following sizes.

DSR 3066 (a)Supplying & fixing of powder coated extruded aluminium Supply Air Grills with Sqm. 20.00 9,679.56

aluminium volume control dampers as per specifications. - - 9,103.27 1,93,591.20

DSR 3067 (b)Supplying & fixing of powder coated extruded aluminium Return Air Grills with Sqm. 25.00 6,079.19

louvers but without volume control dampers complete as required. - - 5,717.26 1,51,979.75

DSR 3068 (c)Supplying, fixing testing commissioning of supply air diffusers of powder coated 13,151.27

aluminium with aluminium volume control dampers with anti smudge ring & Sqm. 2.00

removable core. - - 12,368.29 26,302.54

DSR 3069 (d) Supplying, fixing testing commissioning of Return air diffusers of powder coated 8,572.81

aluminium without volume control dampers with anti smudge ring & removable core. - - 8,062.41 25,718.43

DSR 1.51 (e)Supplying & fixing of louvers/Sutters complete with frame for exhaust fan Sqm. 3.00 - - 207.00 220.10 660.30

DSR 3070 (f) Thermal insulated flexible duct- 200 mm dia Sqm. 15.00 - - 493.66 524.91 7,873.65

GSS Duct Damper

DSR 16.13 Supply, installation, testing and commissioning of GI volume 7,492.05

control duct damper complete with neoprene rubber gaskets, Sqm. 5.00 - - 7,046.00 37,460.25

nuts, bolts, screws linkages, flanges etc, as per specifications.

DSR 16.14 Supplying, Fixing, testing and commissioning of fire dampers in supply air duct/main branch

and return air path as and where required of required sizes i/c control wiring, the damper shall be

motorized and spring return so as to close the damper in the event of power failure automatically

and open the same in case of power being restored. The spring return action shall be inbuilt

mechanism and not externally mounted. The damper shall also be closed in the event of fire

signal complete as required and as per

specifications.

ANUJ NAVNEET Digitally

CHACHA Date: 2022.10.14

S. No Description

Unit Qty NS Rate Amount DSR 2019 Rate with Amount

Supplying, Fixing, testing and commissioning of fire dampers in supply air duct/main branch

and return air path as and where required of required sizes i/c control wiring, the damper shall be

motorized and spring return so as to close the damper in the event of power failure automatically

and open the same in case of power being restored. The spring return action shall be inbuilt

mechanism and not externally mounted. The damper shall also be closed in the event of fire

signal complete as required and as per

specifications.

NS Y-joints (For Indoor Units)

(v)Supply, Instalaltion, testing and commissioning of Y-joints Including all Taxes & Nos. 12.00 6,057.40

Duties, Freight, Insurance etc. In INR.

NS Corded Self Diagnostic Type Remote Controllers

(vi)Supply, Installation, Testing & Commissioning of Corded Self Diagnostic Type Remote

Controllers Including all Taxes & Duties, Freight, Insurance etc. In INR.

NS Main Intelligent Central Controller System

(vii)Supply, Installation, Testing & Commissioning of Main Intelligent Central Controller

- I Touch System Suitable For 64 Indoor Units To Operate, Monitor, On Set 1.00 1,17,637.10 1,17,637.10 85,830.76 0.10

/ Off, Temperature Setting etc.

Double Skinned Floor Mounted VRV DX AHU

NS 7.3 Supply, installation, testing and commissioning of factory fabricated customized Double

Skinned VRV DX Air-handling unit Floor mounted/Ceiling Supended type fabricated out of

extruded aluminium section with 0.8 mm pre-plasticized / pre-coated Galvanised steel sheet

outside & 0.8 mm plain Galvanised steel sheet inside with blower, blower section and

blower motor TEFC type suitable for operation on 415 volts ± 10%, 50 Hz ± 5% AC supply,

6 Row cooling coil made of Aluminium finned Copper tube with coil section, pre-filter section

with non woven synthetic media of 10 micron particle size with an efficiency of 90%,

polished stainless steel drain pan made out of 22 G sheet duly insulated complete with motor,

belt drive package, guard etc. The AHU panels shall be insulated with 23mm thick & 36 Kg/m³

density PU foam & shall have thermal break.

The motor & blower assembly shall be mounted on Aluminium extruded section only.

The complete AHU shall conform to specication & face velocity across cooling coil shall

be limited to 152 MPM maxm.The capacity of Air-handlers shall be as

For VRF DX AHU- 85,00 CFM, 50 mm St. Pr., 6 Row CC Floor Mounted Nos. 4.00 3,76,490.60 15,05,962.40 2,74,696.36 -0.40

Expansion Kit, Communication PCB & Thermostat

NS 7.4 Supply, installation, testing and commissioning of Electronic Type Expansion Kit,

Communication PCB with Sensors, Corded Self Diagnostic Type Y-joints etc. as

required Including all Taxes & Duties, Freight, Insurance etc. In INR.

Condensate Drain Piping

NS 7.6 Supply, installation, testing and commissioning of PVC condensate drain piping min

15 kg density complete with fittings like elbows, tees, reducers, bends, flanges, supports,

XLPE Class O Plain tubular insulation etc. as required and of following sizes.

25 mm dia pipe, Insulation Thickness - 6 mm meter 20.00 198.10 3,962.00 144.52 0.10

32 mm dia pipe, Insulation Thickness - 6 mm meter 45.00 265.80 11,961.00 193.93 -0.20

40 mm dia pipe, Insulation Thickness - 6 mm meter 45.00 331.60 14,922.00 241.97 -0.40

50 mm dia pipe, Insulation Thickness - 6 mm meter 25.00 440.70 11,017.50 321.58 -0.30

ANUJ NAVNEET Digitally

CHACHA Date: 2022.10.14

S. No Description

Unit Qty NS Rate Amount DSR 2019 Rate with Amount

MR (g)Supplying, fixing testing commissioning of supply air Jet nozzle diffusers of powder coated Sqm. 20.00 9,777.70 1,95,554.00

aluminium with aluminium volume control dampers with anti smudge ring &

removable core.

MR (h)Supplying, fixing testing commissioning of return air Jet nozzle diffusers of powder coated Sqm. 20.00 6,695.50 1,33,910.00

aluminium without aluminium volume control dampers with anti smudge ring &

removable core.

VENTILATION AND SMOKE EXTRACTION FANS

Axial Flow Fan For Fresh Air (Smoke Exhaust)

NS 7.14 Supply, installation, testing and commissioning of ceiling mounted Tube Axial flow fans

with adjustable pitch blade, MS casing, cast aluminium alloy impeller complete with TEFC

Sq. Cage Induction motor (EFF1) suitable for 415 volts ± 10%, 50Hz ± 3

%, three phase A.C supply with support, mountings, vibration isolators, fire retardant

flexible canvass connector 150 mm deep, bird screen etc. & of following capacity. Motor

Insulation shall be class H or as required suitable for 250 °C temperature. The

complete fan along with motor shall be suitable for 250 °C temperature rated for 2 hours.

Fan outlet velocity shall be limited to maximum of 18

Axial Fan shall be AMCA certified for Air and Sound performance in accordance to AMCA

210 and AMCA 300. Complete Fan including Motors selected for this application according to

standard BS EN 12101-3:2002 / UL 705 for 250 °C for 2 hours.

14000 CFM (30mm st. pr, 1450 RPM Fan Motor, Direct Driven) Nos. 10.00 2,68,236.20 26,82,362.00 1,95,711.43 0.20

Plastic Propeller Fans

NS '7.15 Supply, installation, testing and commissioning of propeller exhaust fans of various

capacities as given below suitable for 240 volts, 50 Hz, single phase AC supply

complete with gravity louvers & speed regulator etc.

Transmission & Control Wiring( 3 core 1.5 Sq mm) Rmt 800 208.90 1,67,120.00 152.43 -0.10

NS 7.16 Electrical Panel VRV Outdoor Units (Panel Suitable For Outdoor for Stage,Gang

way & Auditorium - IP54)

One (1) No. 400A TPN MCCB (35 KA).

3 Nos. phase indication lamps & 3 Nos. status indication lamps for ON/OFF/TRIP with

control SP MCB .

One (1) No. digital multifunction meter for measurement of voltage and current (EFF- 3259 of

conzerv or equivalent) with selector push buttons and one set of CTs of ratio

450A TPN Al. Busbar of short circuit withstand capacity 35kA. Busbar shall be insulated

with heat shrinkable sleeves and shall be color coded.

Thirteen (13) Nos. 63A TP MPCB including 15 kW Star Delta Starter with thermal

range of 40A - 63A.

Four (4) Nos. 40A TP MPCB including for 10 kW Star Delta Starter with thermal range

Starter complete with AC3 duty power contactor, single phasing preventer, ON-OFF and Trip

Indicating lamps, Start/ Stop push buttons, Auto Manual Selector Switch, auxiliary contacts

for Building Automation System & remote control, interlocking etc.

suitable for the motor H.P. as specified below

Thirteen (13) Nos. Star Delta Starters (15.0 kW each).

Four (4) Nos. Star Delta Starters (10.0 kW each). Set 1 8,68,138.30 8,68,138.30 6,33,414.04 0.30

ANUJ NAVNEET Digitally

CHACHA Date: 2022.10.14

S. No Description

Unit Qty NS Rate Amount DSR 2019 Rate with Amount

NS 7.17 Isolator Switch For VRV Outdoor Units

63 A 3 pole isolator switch for Outdoor Unit with sheet metal enclosure, rain Nos. 15 7,658.30

protection etc. as required to suit the site condition.

TOTAL OF HVAC WORKS 65,48,198.90 71,47,620.71

ANUJ NAVNEET Digitally

CHACHA Date: 2022.10.14

Fire fighting works

Auditorium, Boys Hostel, Girls Hostel Training hall Jhansi

Sl. No. System Description NS Amount DSR 2019 Amount Total

Boys hostel, girls hostel & training cetre

ANUJ NAVNEET Digitally signed by ANUJ

CHACHA Date: 2022.10.14

SCHEDULE OF QUANTITIES FIRE FIGHTING ITEMS

S. No Description Enhanced

Unit Qty NS Rate Amount rate with Amount

FIRE FIGHTING SYSTEM

DSR1.5 Supplying, Installation, Testing and Commissioning of electric driven main

fire pump suitable for automatic operation and consisting of following: complete in

all respect as required

Horizontal type, multistage, centrifugal, split casing pump of cast iron body &

bronze impeller with stainless steel shaft, mechanical seal to ensure a minimum

pressure of 3.5 kg/sq.cm. at highest and farthest outlet at specified flow of ......2280.......

Ipm at .......70..... m. head conforming to IS 1520.

Suitable HP SQ cage induction motor, TEFC, synchronous speed 1500 RPM, suitable

for operation on 415 volts, 3 phase 50 Hz. AC with IP 55 protection for enclosure,

horizontal foot mounted type with Class-'F' insulation, conforming to 15-325.

M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc.

Suitable cement concrete foundation duly plastered with anti vibration pads. Set 2.00 - - 3,90,547.88 7,81,095.76

DSR2.5 Supplying, Installation, Testing and Commissioning of diesel engine driven

main fire pump suitable for automatic operation and consisting of following: complete

in all respect as required

Horizontal type, multistage, centrifugal pump of cast iron body and bronze impeller

with stainless steel shaft mechanical seal to ensure a minimum pressure of 3.5

kg/sq.(.;m. at highest and farthest outlet at specified flow of " ...2280 lpm

at ......70...... m. head conforming to IS 1520.

Suitable HP. 1500 RPM water cooled with r..diator, diesel engine conforming to

relevant BS & IS standard complete with auto starling mechanism, 12 volts/24 Volts

electric starting equipment. Diesel Tank, exhaust pipe extended upto 1 m. outside

pump house duly insulated wilh 50 mm. thick glass wool with 1.0 mm. thick aluminium

sheet cladding. residential silencer, instruments and protection as per specification,

stop Solenoid for auto stop in Ihe event of fault with audio Indications, painted with

posl office red colour etc.as required

M.S.fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as

Suitable cement concrete foundation duly plastered with anti vibration pads set 1.00 - - 6,48,932.20 6,48,932.20

ANUJ NAVNEET Digitally

CHACHA Date: 2022.10.14

S. No Description Enhanced

Unit Qty NS Rate Amount rate with Amount

DSR3.2 Supplying, Installation, Testing and Commissioning of electric driven

pressurisation pump suitable for automatic operation and consisting of followlng:

complete in all respect as required.

Horizontal type., multi stage, contrifugal pump or cast iron body and bronze

impeller with stainless steel shaft, mechanical seal and flow of …180 Ipm at

......70 m head conforming to'IS: 1520

suitable HP SQ cage Induction motor TEFC type suitable for operation on 415 volts, 3

phase 50 Hz. AC with IP 55 class of protection for enclosure, horizontal fool

mounted type with Class-

'F' Insulation, conforming to IS : 325.

M.S.fabricated Common base plate, coupling, coupling guard, foundation bolts etc.

Suitable cement concrete foundation duly plastered with anti vibration pads set 2.00 - - 1,08,872.92 2,17,745.84

DSR5.5 Fabrication, supply, Insallation testing & commissioning of Electrical control panel of cubical

construction, floor mounted type, fabricated out of 2mm thick CRCA sheet,

compartmentalised with hinged lockable doors, dust and vermin proof, powder coated of

approved shade after 7 tank treatment process, cable alley, interconnection with suitable

size copper conductor cable/solid copper strip, having switchgears and accessories,

mountings and internal wiring, earth terminals, numbering etc. complete in all respect,

suitable for main fire pump, pressurisation pump & diesel pump set complete as per CPWD

specification with following in coming and Outgoings, suitable for operation on 415V, 3

phase, 50Hz Ac Supply with enclosure protection class IP 42 as required :

630A, 50kA 4 Pole MCCB, Ics=100% Icu Rating

Digital Voltmeter 0-500V with selector switch

Ammeter (0-630 A) with selector swtich & CTs etc.

LED type RYB phase indicating lamps, ON, OFF, trip

indicating lamps

Set of Copper Bus Bar 800Amps

(Note : All outgoing feeders for pumps should have

digital Ammeter with selector switches, and LED type

ON, OFF, trip indicating lamps)

ANUJ NAVNEET Digitally

CHACHA Date: 2022.10.14

S. No Description Enhanced

Unit Qty NS Rate Amount rate with Amount

200 Amp, 50kA TPN MCCB, Ics=100% Icu, with fully

automatic Star/Delta starter suitable for 75 hp pump with

overload protection, current sensing type single phase

preventor complete with all acceessories and internal

wiring required for automatic operation, selector switch

for local/remote, auto/manual/OFF operation. - 2 sets

100 Amp, 50kA TPN MCCB, Ics=100% Icu, with Suitable

HP fully automatic Star/Delta starter with overload

protection, current sensing type single phase preventor

complete with all acceessories and internal wiring

required for automatic operation, selector switch for

local/remote, auto/manual/OFF operation. - 2 sets

Diesel Engine Control

Control for diesel engine comprising -

Automatic/Manual selctor switch & 3 attempts starting

device, timers and relays as required, push buttons,

start/stop in manual mode

Indicating lamp for high/ Low Lub. Oil pressure, High

Water Temp and Engine on indication

Battery charger suitbale for 12V/24 V DC with boost 4,77,780.41

and trickle selector switch, 0-30 V DC volt meter, and 0-

20 A DC Ammeter

All standard relays and accessories for automatic

operation of diesel engine

System Controller

Designing, Supply, Installation, Testing and set 1.00 - - 4,77,780.41

commissioning of system controller to control operation

of main electric fire pump, diesel pump, Pressurization

pump, Terrace pump in sequence as per specification

consisting of relays, timers. Sensors, annunciation

window for fault indication, complete as per

ANUJ NAVNEET Digitally

CHACHA Date: 2022.10.14

S. No Description Enhanced

Unit Qty NS Rate Amount rate with Amount

DSR-6 Providing laying, testing & commissioning of 'C' class heavy duty MS Pipe conforming to IS

'23913589 i/e fittings tike elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in ground

including excavation & providing cement concrete blocks as supports, anticorrosive

treatment with coaltar/asphatt tape as per IS 10221, refilling the trench etc. of following

sizes complete as required.

DSR7 Providing laying. testing & commissioning of class "C" heavy duty MS pipe conforming to IS

3589/1239 including fittings like elbows, tees, flanges, tapers nuts bolts, gaskets etc. fixing

the pipe on the wall/ceiling with suitable clamps and painting with two or more coats

of synthetic enamel paint of required shade complete as required.

DSR7.9 200 mm. dla (wall thickness 6.3 mm) m 20.00 - - 3,111.23 62,224.60

DSR9.1 Supplying and fixing single headed Internal hydrant valve with nstantaneoLis Gun 7,968.41

metal couplings of 63 mm dia with cast iron wheel 151 marked conforming to IS 5290

(Type -A) with blank Gunmetal cap and chain as required.

DSR10.1 Supplying and fixing Single headed external yard hydrant valve with 1 No. 63 7,968.41

mm dia Instantaneous FM Gun metal coupling and cast iron wheel. lSI marked,

conforming to IS 5290 (type A) with blank Gunmetal cap and chain as required.

DSR11 Supplying, fixing, testing and commissioning of butterfly valve PN 1.6, with

ronze/Gunmetal seat duly lSI marked complete wilh Nuts, Bolts,

washers. gaskets, conforming to IS 13095. of following size required.

ANUJ NAVNEET Digitally

CHACHA Date: 2022.10.14

S. No Description Enhanced

Unit Qty NS Rate Amount rate with Amount

DSR14 Providing. installation, testing and commissioning of dual plate non-return

valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts,

nuts, washers etc. as required

DSR15 Providing, installation, testing and commissioning of stainless steel

strainer fabricated out of 1.6 mm. thick stainless steel sheet with 3 mm. dia

holes with stainless steel flange

DSR16.1 Supplying and fixing 63 mm dia, 15 mtr. long RRL hose Pipe with 63 mm dia Male and 5,516.43

Female Gun metal couplings duly binded with GI wire, rivets etc. conforming to IS 638 Each 32.00 - - 1,76,525.76

(type-A) as required

DSR17.2 Supplying and fixing First-Aid Hose Reel with MS construction spray painted in Post

office Red, conforming to IS 884 with upto date amendments, complete with the

followingas required

20/30/40m. long 20 mm (nominal lnternal) dia water hose Thermoplastic (Textile

reinforced) Type -2 as per IS: 12585

20 mm (nominal internal) dia gun metal globe valve & nozzle

Drum and brackets for fixing the equipmets on wall.

Connections from riser with 40 mm dia stop valve (gun metal) & M.S. Pipe Each 10.00 - - 10,730.88 1,07,308.80

DSR18.1 Supplying & fixing 63 mm dia Gun metal branch pipe with 20 mm (nominal intemel 2,554.06

diameter) size Gun Metal nozzle conforming to IS 903. suitable for instantaneous

connection to inter- onnect hose pipe coupling as required

ANUJ NAVNEET Digitally

CHACHA Date: 2022.10.14

S. No Description Enhanced

Unit Qty NS Rate Amount rate with Amount

DSR19.2 Supplying and fixing 4 way fire brigade connection of cast iron body with 4 Nos. Gun 14,697.01

metal male Instantaneous inlet couplings complete with cap and chain as recc.

for 150mm dia MS pipe connection. conforming to IS 904 as required

DSR20 Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 19,149.07

mm. in height with air release valve on top and flanged connection to riser, drain

arrangement with 25 mm dia Gun metal wheel valve, with required

accessories, pressure gauge and painting with synthetic enamel paint of approved

shade as required

DSR21.1 Providing fixing testing & commissioning of 15 mm size quartzoid bulb type 514.64

sprinklers, of rating 68 degree C. pendent accessories. with required Each 965.00 - - 4,96,627.60

DSR24.3 Providing & fixing testing & commissioning of installation control valve of Cast 50,930.21

iron body and brass/bronze working parts comprising of water motor alarm, bronze seat

clapper, and clapper arm, hydraulically driven mechanical gong bell to sound

continuous alarm when the Wet riserl Sprinkler system activates, pressure

gauges, emergency releases, strainer, pressure switch, cock valve complete with

drain valve and bypass, test control box. ball valves, MS pipe of required size,

flanges, orifice plate. gasket etc. of size 150 mm dia as required

NS-F1 Providing, installation, testing and commissioning of gun metal valves of following

sizes as required

NS-F2 Supplying and fixing of hose cabinet of size 900 mm x 600 mrn x 500 mm made of 2 mm

thick MS sheet with 6 mm thick glazed glass doors i/c necessary locking

arrangement suitable to accommodate extemal hydrant with butterfly valve, 2 Nos. 15 mtr.

long Hose pipe, 1No. branch pipe. mounted on wall OR raised brick platfonm & duly Each 6.00 13,301.30 79,807.80

painted with Post office red extemally and white intemally with synthetic enamel paint

complete in all respect, for external hydrant, as required

ANUJ NAVNEET Digitally

CHACHA Date: 2022.10.14

S. No Description Enhanced

Unit Qty NS Rate Amount rate with Amount

NS-F3 Providing & fixing angle iron (40 mm x 40 mm x 5 mm) door frame and M.S sheet (2

mm.thlck) cum glass shutter of size 2.1 rntr. K 1.2 mtr. (N.S.) with 25 mm. J( 25 mm. x 3

mm. angle frame all around & stiffened in between i/c hinges, handle, locking

arrangement. painting with approved synthetic enamel paint i/c sign writing on glass at Each 10.00 46,251.10 4,62,511.00

internal hydrant including providing & fixing M.S. Sheet2 mm. thick on remaining

portion above door to close opening i/c painting etc. as required

NS-F4 Providing & fixing double flanged flexicon expansion joint with unit control of standard

length as per maufacturers specs tested to a pressure of 20Kg/Sqcm including rubber

gaskets, flanges, nuts, bolts and washers complete as required.

NS-F5 Supply, installation and testing of cylindrical type flanged pressure vessel tank, 450 mm

dia, 2 m long and of 10 mm thick M.S., common for a set of hydrant and sprinkler fire

pumps including flanged connection, suitable supporting legs etc. The air vessel tank

shall be provided with air release valve, stop cock, safety valve, pressure gauge, 50 mm dia

drain valve, suitable pressure switches to operate main pumps and jockey Each 2.00 1,05,182.60 2,10,365.20

pumps, tested to min 25 KG/cm complete including painting with synthetic enamel

paint of approved shade with all accessories as per direction of the Engineer-in-charge.

NS-F6 Providing, jointing and testing of sprinklers through flexible connections(internal

diameter 25mm & outlet connection15mm dia.) as per requirement at site.Make-

SeungJin-Korea.The flexible connectors shall be supported through false ceiling

through clamps or as directed at site.The flexible connector shall be suitable for

working pressure 20 kg/sqcm .

NS-F7 Providing and fixing signages printed on photoluminescent U1000 aluminium sheet of

1.0 mm (+ -10%) containing lumigen II as base chemical, covered under UV stablized coating

and of appropriate size (Glo-lite or eq. Make) including fixing on wall, door, ceiling

etc. with proper clamps, hangers, cleats anchor fasteners etc. complete in all respacts

as diercted by Engineer-in-charge.

ANUJ NAVNEET Digitally

CHACHA Date: 2022.10.14

S. No Description Enhanced

Unit Qty NS Rate Amount rate with Amount

NS-F8 Providing & fixing cast iron foot valve complete with flange.-150mm dia. Each 1.00 24,090.50 24,090.50

NS-F9 Providing and fixing standard firemans axe with heavy rubber handle. Each 16.00 1,740.30 27,844.80

NS-F10 Providing and fixing of G.M. Fire Brigade adopter assembly with 150 mm dia

outlet, suitable for local fire tender complete as required. Each 16.00 14,887.20 2,38,195.20

NS-F11 Providing and fixing ISI Marked of approved make Fire Extinguishers complete with all

accessories as per manufacturer's specifications.

NS-F11.1 CO2 gas nozzle type - 9 Litre capacity (IS:15683). Each 25.00 29,272.70 7,31,817.50

NS-F11.2 Mechanical Foam gas cartridge type. 9 Kg capacity (IS:15683). Each 25.00 6,652.40 1,66,310.00

NS-F11.3 ABC dry powder stored pressure type 6 kg capacity (IS:15683). Each 15.00 10,750.50 1,61,257.50

TOTAL (FIRE FIGHTING) 23,53,549.10 74,46,939.62

ANUJ NAVNEET Digitally

CHACHA Date: 2022.10.14

Item of Work Unit Qty NS Rate Amount rate with Amount

SUB HEAD - I - (WET RISER SYSTEM - PUMPING EQUIPMENTS)

DSR4.1 Supplying, Installation, Testing and Commissioning of electric driven

Terrace pump suitable for automatic operation and consisting of

1 following: complete in all respect as required.

Horizontal type, multistage, centrifugal, split casing pump of cast iron

body & bronze impeller with stainless steel shaft, mechanical seal and

flow of 900 LPM at 35 m. head confirming to IS : 1520

Suitable HP SQ cage induction motor TEFC type suitable for operation

on 415 volts, 3 phase 50 Hz. AC with IP55 class of protection for

enclosure, horizontal foot mounted type with Class-'F' insulation,

conforming to IS-325

M.S. Fabricated Common base plate, coupling, coupling guard,

foundation bolts etc. as required.

Suitable cement concrete foundation duly plastered with anti vibration

MR-1 Fabricating, Supplying, Installation, Testing and Commissioning Air

Vessel of continuous welded construction with flanged discharge

header in pump house fabricated out of 10 mm thick MS sheet, Air

Release Valve, complete with drain arrangement with 25 mm dia gun

metal ball valve complete with all accessories etc. as required of the

2 following sizes - -

2.1 2 Meter high and 450 mm dia suitable to operate Jockey Pump, Main

Fire Pump & Diesel Engine Driven Fire Pump complete with all pressure

switches as per specifications as reqd. Nos 2 43,276.30 86,552.60

SUB HEAD - II - (HYDRANTS SYSTEM) - -

DSR9.2 Supplying and fixing Single Headed Internal Hydrant Valve oblique

pattern with instantaneous Stainless Steel coupling of 63 mm dia with

cast iron wheel ISI marked, conforming to IS : 5290 (Type A), with 80

mm dia flanged inlet, with ABS cap and chain complete with all

3 accessories etc. as required. Each 24 - - 6,366.01 1,52,784.24

ANUJ NAVNEET Digitally

CHACHA Date: 2022.10.14

Item of Work Unit Qty NS Rate Amount rate with Amount

DSR16.2 Supply, Installation, Testing and Commissioning 63 mm dia. 15 Mtr.

Long RRL hose pipe with 63 mm dia. male and female stainless steel

couplings duly binded with GI wire rivets etc. ISI marked, IS 636 (type-

DSR18.2 Supplying and fixing Stainless Steel branch pipe with 20mm dia nozzle

conforming to IS:903. suitable for instantaneous connections to hose

5 pipe coupling etc. as required. Each 24 1,752.33 42,055.92

DSR17.2 Supplying and Fixing First Aid Hose Reel, wall mounting swinging type

complete with drum & bracket of MS construction, spray painted in Post

office Red, confirming to IS 884/1995 with upto date amendments,

6 complete with the following as required. - -

36 Meter long 20 mm dia water hose Thermoplastic (Textile reinforced)

Type - 2 as per IS : 12585 - -

20 mm dia. ball valve & nozzle. - -

Drum and brackets for fixing the equipments on wall. - -

Connection from riser with 40 mm dia (Gun metal) stop valve & M.S.

Providing & fixing angle iron (40mm x 40mm x 5mm ) door frame and

MS sheet (2mm thick)

cum glass shutter of size 2.1 mtr x 1.2 mtr (N.S) with 25mm x 25mm x 3

mm angle frame all

MR-2 around & stiffened in between i/c hinges, handle, locking arrangement,

painting with approved synthetic enamel paint i/c sign writing on glass at

internal hydrant including providing & Fixing MS sheet 2mm thick on

remaining portion above door to close opening i/c painting etc as

SUB HEAD - III - (PIPING, VALVES AND ACCESSORIES) - -

SLTC of M.S. pipe on surface - -

ANUJ NAVNEET Digitally

CHACHA Date: 2022.10.14

Item of Work Unit Qty NS Rate Amount rate with Amount

DSR7 Supplying, laying, fixing, testing and commissioning of following sizes

(NB) of class 'C' M.S. pipes confirming to IS 1239 including cutting,

threading, welding etc. and providing all fittings e.g. elbows, reducers,

clamps, hangers, flanges, gaskets, nuts, bolts and washers etc.

including painting of pipes and fittings with red paint over a coat of ready

mixed primer, both of approved quality and shade including cutting

holes and chases in brick or RCC walls/slabs and making good the

same etc. complete in all respect as required.

(The Welding shall not be done for piping less than 50 mm dia.) (heavy

DSR11.5 Supplying, fixing, testing and commissioning of Butterfly valves wafer

type of PN 1.6rating of following sizes with EPDM rubber lining seat and

CF-8 stainless steel disc duly ISI marked and stainless steel stem with

lever/gear operation and cast iron body in powder coated finish for fire

fighting application complete in all respects confirming to IS: 13095 as

9 required. - -

MR-3 Supplying, fixing, testing and commissioning of double flanged cast iron

Dual Plat Check Valve, PN 1.6 of following sizes confirming to IS : 5312

complete with EPDM rubber lining seat and stainless steel disc, rubber

gasket, Gl bolts, nuts, washers etc. as required.

MR-4 Providing and Fixing Copper Alloy Air release valve, having threaded

connection including the cost of 25 mm dia Gunmetal Gate valve with

11 required fittings as per standard design. Each 4 2,138.80 8,555.20

ANUJ NAVNEET Digitally

CHACHA Date: 2022.10.14

Item of Work Unit Qty NS Rate Amount rate with Amount

MR-5 Supplying, fixing, testing and commissioning of resilient rubber

neoprene lined single arch vibration eliminators suitable for raw water

upto 45 deg. C. temperature working pressure 7 kg/ sq.cm and test

12 pressure 14 kg/sq.cm. - -

MR-6 Supply, Installation, Testing and Commissioning of 100 mm dia Borden

type, Stainless Steel dial type Pressure Gauge including brass isolation

valve and siphon pipe having calibration of 0-16 Kg / cm2

MR-7 Supplying, fixing, testing and commissioning of Pressure switches in

14 pipe line including connection etc as required. Each 2 2,751.50 5,503.00

MR-8 Supplying and fixing of Fire Man's axe with heavy insulated rubber as

15 per standard conforming to IS 926. Each 24 1,474.80 35,395.20

SUB HEAD - IV - (FIRE EXTINGUISHERS) - -

MR-9 Providing and fixing fire extinguisher of carbon dioxide type consisting of

brand new high pressure steel cylinder bearing IS: 7285 mark and

having the approval of controller of explosives Nagpur, wheel type valve

bearing IS:3224 mark internal discharge tube, 1 meter long high

pressure discharge hose, non conducting horn, suspension bracket,

fully charged bearing IS: making fixed to wall as directed conforming IS :

16.1 4.5kg capacity cylinder Each 24 8,844.90 2,12,277.60

MR-10 Providing and fixing ISI marked portable fire extinguishers of the Dry

17 Chemical Powder ABC type of 6 Kg as per IS:15683.. Each 25 4,913.80 1,22,845.00

ANUJ NAVNEET Digitally

CHACHA Date: 2022.10.14

Sl. No. Summary of heads DSR Amount NS Amount Total

Auditorium, Hostels and others

3 Stage and Lightning - 77,79,730.60 77,79,730.60

1 Electrical & Low voltage (Hostels) 84,89,191.83 281,14,067.00 366,03,258.83

1 AMC Lift, DG sets, Transformer 124,10,103.69 124,10,103.69

ANUJ NAVNEET Digitally signed by ANUJ

CHACHA Date: 2022.10.14

NBCC- Jhansi- 800 Seater Auditorium NS DSR

Sl. No. Description Unit Quantity NS Rate Amount DSR Rate Amount

SITC of Passive 2 x 8 inch LF speaker plus 1 x 1" HF, Frequency Response: 55 Hz - 20 kHz (-3dB),

Max 119 dB cont. 125 dB peak LF Max 130 dB cont. 136 dB peak HF. Continuous AES Power

1 Handling: LF 400 Watt and HF 100 watt, Program AES Power Handling: LF 800 Watt and HF 200 Each 5 6,88,912.00 34,44,560.00 - -

watt, Peak AES Power Handling: LF 1600 Watt and HF 400 watt Impedance Nominal: 32 ohm,

Dispersion Nominal: 60° x 10° (hor. x vert.), or better.

SITC of Passive 2 x 8 inch LF speaker plus 1 x 1" HF, Frequency Response: 55 Hz - 20 kHz (-3dB),

Max 119 dB cont. 125 dB peak LF Max 130 dB cont. 136 dB peak HF. Continuous AES Power

2 Handling: LF 400 Watt and HF 100 watt, Program AES Power Handling: LF 800 Watt and HF 200 Each 5 6,88,912.00 34,44,560.00 - -

watt, Peak AES Power Handling: LF 1600 Watt and HF 400 watt Impedance Nominal: 32 ohm,

Dispersion Nominal: 60° x 10° (hor. x vert.), or better.

SITC of Pasive 2 x 18 inch sub-woofer, Frequency Response: 29 Hz - 180 Hz (-10dB), 33 Hz - 160

Hz (±3 dB), Continuous SPL: 135 dB/1m, Program SPL 138 dB/1m, Peak 141 dB/1 m. Power

3 Handling: 1250 Watt cont. IEC268 AES, Maximum Power Handling: 2500 Watt prog. / 5000 Watt Each 4 8,48,237.50 33,92,950.00 - -

peak, Impedance Nominal: 4 ohm, Dispersion Nominal: Omni (hor. x vert.). or better

SITC of Passive 2 x 6 inch mid / high speaker, 2 x 6” Full Range Cabinet,Reflex Tuning, Impedance: 8

Ohm, Minimum 6.0 @ 1 kHz, Power Handling (AES): 250 Watts (continuous), Max. Power Handling

(AES): 500 Watts (program), 1000 Watts (peak 10 ms), Sensitivity 2.83V / 1m: 91.5 dB, Max. SPL:

4 115 dB cont, 121 dB peak, Frequency Response (±3 dB): 90 Hz - 24 kHz, Usable Frequency Range (- Each 2 2,56,350.00 5,12,700.00 - -

10 dB): 75 Hz - 26 kHz, Dispersion: 160° x 40° or better

SITC of 15" High Power Powered Stage Monitor with Critical Performance Indicators: Max SPL @ 1m:

132 dB, Frequency Response (–3 dB): 50 Hz – 17 kHz, Coverage Angle (H x V): 80 x 50, Transducers:

5 15" low frequency woofer with 44 mm PET high frequency driver, Inputs: 2 x Mic / Line Input (XLR/ Each 4 1,02,435.40 4,09,741.60 - -

TRS Jack), 1 x Line Input (XLR / RCA), Mounting Options: M10 Fastening Points, 35mm Pole Socket,

Amplifier Power: Class H, 500W (1000W Peak)

SITC of 8" Powered Control Room Monitor with Critical Performance Indicators: Max SPL @ 1m: 123

dB, Frequency Response (–3 dB): 64 Hz - 20 kHz, Coverage Angle (H x V): 90 x 60, Transducers: 8"

6 low frequency woofer with 25 mm PET high frequency driver, Inputs: 1 x Mic / Line Input (XLR/ TRS Each 2 39,786.40 79,572.80 - -

Jack), 1 x Line Input (RCA), Mounting Options, M10 Fastening Points, 35mm Pole Socket, Amplifier

Power: Class AB, 250W (500W Peak)

SITC of Passive 5" inch, Frequency Range: 67 Hz - 20 kHz, Frequency Response: 72 Hz - 20 kHz,

Dispersion: 100º x 100º, Max Spl: 114 dB, Rated Power Peak: 189W, Rated Power Continuous: 90W,

Nominal Impedane:8 Ohms - 100/70 V - 2.5W, 5W, 10W, 20W, Enclosure: Dura-light ABS Enclosure

with rear passive bass radiator for extended frequency range.

SITC of Array frames for line array

SITC of Wall Mount Bracket for Control Room Monitors

SITC of Wall, Ceiling Cradle, complete with Handwheels for Leap Fills

SITC of 2 Channel analog Amplifier, 1500 Watts @ 4 ohms Audio Power Amplifier, Toroidal or better

ANUJ NAVNEET Digitally signed by ANUJ

CHACHA Date: 2022.10.14

Sl. No. Description Unit Quantity NS Rate Amount DSR Rate Amount

SITC of 2 Channel analog Amplifier, 2000 Watts @ 4 ohms, Audio Power Amplifier, Toroidal or better

SITC of 2 Channel analog Amplifier, 700 Watts @ 4 ohms, Audio Power Amplifier, Toroidal or better

SITC of 1 x 350W @ 4 Ohms & 100/ 70 V, Desk-top 6-Zone 4-input Mixer Amplifier with USB

SITC of 24 Channel Analogue Mixer

SITC of 33 Meter Snake Cable minimum 20 Channel with Drum of Interface Box & Necessary

SITC of 2 inputs x 6 outputs, speaker management system, with AES inputs, USB inputs, or better.

SITC of CD/ DVD/ Blue Ray player with USB

SITC of Dual Channel 31-Band Equalizer, 1/3-octave Constant Q frequency bands, Switchable

boost/cut ranges of ±6 or ±12 dB, Front panel bypass switch, ±12 dB input gain range, XLR and TRS

Inpts and Outputs, Frequency Response of <10Hz to >50kHz, Dynamic range of greater than 108dB

SITC of High-performance Handheld Vocal Microphone (cardioid, dynamic) with metal housing &

20 adapted sensitivity for deep vocals. Includes (1) Travel Case (2) Placement Rings & (2) Wind Each 5 28,965.70 1,44,828.50 - -

SITC of Floor Standing Podium Microphone, No of Capsules - 2, Type: Condenser, Pattern: Super

Cardioid, Sensitivity - 16mV PA, Max SPL 133 dB

SITC of Wireless hand held receiver, Diversity Principle: True Diversity, No. of Channels : 2,

Frequency response 20-20 Khz, Frequency Selection: Auto, Modulation : Wideband FM, Attenuation :

0 to 14 Db selectable , LED Display, Range : 100 meters, With RF Shielding

SITC of Wireless hand held microphone transmitter, Microphone with Display on Transmitter, Type :

Dynamic, RF Power Output : 30mW, Polar Pattern: - Cardioid, Frequency response: 55 Hz to 20Khz,

Mute Button on Transmitter, Battery Operation time: 8 hour with rechargeable battery, Range : 100

meters, PLL Synthesized Circuits

SITC of Type: Body Pack Transmitter, Oeprating Range: 100 ft Line of Sight, Mute Switch, RF Output -

30 mW, RF Range 100m Line of Sight, Operation Time - 8 Hours

SITC of Instrument Condenser Microphone, Type: Hybrid Condenser, Polar Pattern: Cardioid, Freq.

25 Response: 80-18 kHz, Max SPL: 129 dB, All Metal Housing, Mute Switch Each 5 10,779.50 53,897.50 - -

SITC of Antenna Distribution Set for the Microphone System, Complete with 2 Flag Antennas &

SITC of 4 square mm, 2 core, speaker cable or better

28 SITC of 6 mm 2 core shielded wire Mtr 500 347.10 1,73,550.00 - -

SITC of Connnectors, XLR Male Female, 1/4 inch Phono Jack

SITC of Microphone Stand (Big)

SITC of Microphone Stand (Smalll)

ANUJ NAVNEET Digitally signed by ANUJ

CHACHA Date: 2022.10.14

Sl. No. Description Unit Quantity NS Rate Amount DSR Rate Amount

Supply, Installation, Testing & Commissioning of 65in diagonal, UHD, D-LED backlight, 500 nit

32 brightness, 24x7 reliability, single- or quad-source viewing, speakers, landscape and portrait, ERO with Each 2 6,50,970.70 13,01,941.40 - -

Gorilla Glass, PAISE PAISE 20 pt IR touch. Single TouchMark key included

Supply, Installation, Testing & Commissioning of 55in diagonal, UHD, D-LED backlight, 500 nit

brightness, 24x7 reliability, single- or quad-source viewing, speakers, landscape and portrait, ERO with

33 Gorilla Glass, PAISE PAISE 20 pt IR touch. Single TouchMark key included Each 4 2,62,775.70 10,51,102.80 - -

Supply, Installation, Testing & Commissioning of Free Standing/Floor Mounted Digital Podium built

of 1.6mm CRCA Steel sheet, screw less chasis, polymer powder coated, Wooden Top, All directional

34 wheels with lock, Display feature- Highly Sensitive, Built- in interactive Capacitive touch Monitor with Each 2 3,85,844.00 7,71,688.00 - -

Tilt facility, Screen size-19"(interactive type), Color LED, scratch resistant, antiglare & overlay

tampered vandal resistant glass(3mm) , Space & technical provision for additional devices like laptop,

Visualizer, keyboard, mouse etc.Approved

Supply, installation, testing & commissioning of Client Workstation having Intel Core i5 orginal

35 motherboard, 8 GB RAM, Video graphics card 2 GB Licensed Windows 10 Professional (64 bit) and 1 Each 2 96,638.40 1,93,276.80 - -

Supply Installation Testing & Commissioning of Full HD Ceiling mounted PTZ Camera ,

1/2.8", 2MP CMOS/CCD or better 10 or more preset positions, 20x or more Optical Zoom,

36 Resolution: 1080p or better, S/N ratio: 50 dB or better,Pan angle: +/- 160 deg or more. Each 3 3,85,844.00 11,57,532.00 - -

Horizontal Viewing angle: 65deg or more.,supports Poe, Output: 1x HDMI, LAN,

RS 232, etc as required at site.

Supply, Installation, testing & Commissioning of Recording & Streaming devices that high-quality,

Full HD synchronized recording,

37 storage management,Supports 4 HDMI Inputs and IP video sources , and standard RTSP Each 1 11,55,937.00 11,55,937.00 - -

streams.Supports 1080p 60/30fps video recording. Built-in 1TB HDD storage.

Supply Installation Testing & Commissioning of HDMI & Control twisted pair Scaling receiver

with 1x Twisted pair/HDbaseT input on RJ45, Output: 1x HDMI, 1x RS232/IR(Controls),

supporting reception of audio,video, controls and power upto minimum 100mtrs or more.

38 4K resolution support & should be able to do scaling upto 4K resolution. HDCP Each 5 1,17,529.30 5,87,646.50 - -

2.2 compliant & EDID. as per specifications & Compatible to the Modular Digital Matrix

Switcher complete etc. as required.

Supply Installation Testing & Commissioning of HDMI & Control twisted pair Transmitter with

Input: 1x HDMI, 1x RS232/IR(Controls) , Output: 1x Twisted pair/HD base T input on RJ45,

supporting transmission of audio,video, controls and power upto minimum 70 mtrs

or more. Upto 4K resolution support at various distance, remote powering feature, HDCP

2.2 compliant & EDID as per specifications complete etc. as required.

Supply Installation Testing & Commissioning of HDMI & Control twisted pair Receiver with

Input:1x Twisted pair/HDbaseT input on RJ45, Output:1x HDMI, 1x RS232/IR(Controls) ,

supporting reception of audio,video, controls and power upto minimum 70mtrs or more. Upto

4K resolution support at various distance ,remote powering feature,HDCP 2.2 compliant

& EDID. as per specifications complete etc. as required.

ANUJ NAVNEET Digitally signed by ANUJ

CHACHA Date: 2022.10.14

Sl. No. Description Unit Quantity NS Rate Amount DSR Rate Amount

Supply lnstatlation Testing & Commissioning of 8 x 8 HDMI Matrix Switcher with HDCP Compliant,

41 HDMI and HDCP as per technical specification. Input and Output: supporting 8 signal input and 8 Each 1 6,82,960.50 6,82,960.50 - -

signal outputs.

Supply Installation Testing & Commissioning of Touch Control Network Controller System with 32-bit

embedded proces DSR of frequency max 533MHz, built-in 8M memory storage and 16M FLASH

storage . to be high-speed computing complex RG Spectrum instructions. Its highly integrated chip to

support to the CPU, allowing a variety of complex arithmetic and control to run smoothly. 8

independent programmable RS-232 control interface, 8 independent programmable IR infnred

transmitter port, 8 -channel digital I I O input and output port, with protection circuit, 8 -channel low

current relay controlinterface, Embedded intelligent IR

Supply Installation Testing & Commissioning of 7 inch Touch Screen Display 16:9 high resolution

color and high definition widescreen display.one-Way commu nication through a wireless wifi and a

programmable central control host. Interface can be user-dened,PNG, JPG and other common image

formats. Graphical interface supports text, 3D buttons.

Supply Installation Testing & Commissioning of Wireless presentation device which supports video

resolution upto 1080p (Full HD},with lxHDMI I D VI/ DP output, PoE enabled Ethernet port, lxUSB port

for data sharing ,Supports Windows laptops and MAC as well as iOS systems, Windows end

44 Android mobile operating systems display minimum 2 users screen simultaneously on a single Each 1 1,87,825.80 1,87,825.80 - -

display through hardware dongle/ software app. Supports DHCP, Audio out.zupport 40 or more

concurrent users. Support Full HD video of 1080p @ 30fps or more etc as required at site.

Supplying & Fixing of Floor Standing Rack network Rack - 42U / 600w / 800d, with Heavy Duty

Extruded Aluminium Frame for rigidity. Top cover with FHU provision. Top & Bottom cover with cable

entry gland plates. Two pairs of 19” mounting angles with ‘U’ marking. Depth support channels - 3

pairs. With a Overall Weight Carrying Capicity of 1000Kgs. Side Panels - 42U/800d Front Glass Door,

42U/600w Rear MS Door (Fully Perforated - Mesh) 42U/600w Fan 90CFM 230V AC, 4” dia Castors

with Brake (set of 4) Cable manager 1U MS with Loops Shelf, Stationery 475mm N/W PDU 7Sockets

5Amps with MCB Mounting Hardware (Pkt. Of 20) Vertical Cable Channel 50mmW 42U,

Supply, Installation, testing and commissioning of required cable of HDMI, VGA, Audio, power,

speaker, Microphone and conenctors as per site requirement etc complete required.

Supply, Installation, testing and commissioning of POP BOX includes power point, XLR, IOs and

speakon conenctors as per site requirement etc complete required.

ANUJ NAVNEET Digitally signed by ANUJ

CHACHA Date: 2022.10.14

Scope of the contractor: Design, preparation & submission of shop drawing & 3D drawing, approval the same from

engineer-in-charge/Architect and execution of interior work of Auditorium complete in all respect as per direction of NS DSR

engineer-in-charge

SL No. ITEM Description Qty Unit NS Rate Amount Enhanced Amount

Providing & fixing soft fibre accoustical tiles (white) square edge for false ceiling 595x595x15 mm thickness, density

110 Kg/cum to be installed on framework of T-24 grid suspension system, NRC 0.90, humidity resistance 90%, fire

1 NS-1 rating clam 'A' complete in all respect as per direction of Engineer-in-charge Sqr Mtr 650.00 2,475.50 16,09,075.00 - -

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections,

power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS :

277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm

centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm

dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required

length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels

45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick

bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450

mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips

made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm

thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the

help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm

interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws

of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of

the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers

covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's

specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with

frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer

in Charge but excluding the cost of painting with : 12.5 mm thick tapered edge gypsum moisture resistant board.

Providing & fixing hanging horizontal 30 mm thick with 1200 mm dia natural glass fibers threads only with unique

white finish for HI- LR to facilitate uplighting options . The covered colour edges & hanging for holding clouds panels

on the top. The approved colour & distance of hanging will be confirmed by Engineers. The min. density of the

3 NS-2 panel 140 kg /mt3 & weight of 5-6 Kg/mt sq. It has also have fire class 1 & P ,NRC - upto 0.9, Climate degree C -40 , Nos 24.00 38,316.50 9,19,596.00 - -

RH - 95, Green V0c & RC% - Low ,35 should be hang from metal pipes / purlin & joist with steel wire of 4 set /panel

stains steel chain of heavy duty to be fasten with the clouds core with adhesive. The row of clouds be at given

distance 150 /300 / 450 mm c/c as per choice of engineers.

ANUJ NAVNEET Digitally signed by ANUJ

CHACHA Date: 2022.10.14

Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended

on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side

inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm

made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm

made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to

form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick

(minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall

angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required

cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T"

runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5

mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30

x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall

be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by

Engineer-in-charge

12.5 mm thick square edge PVC Laminated Gypsum Tile of size 595x595 mm, made of Gypsum plasterboard,

manufactured from natural gypsum as per IS 2095 part I and laminated with white 0.16mm thick fire retardant PVC

film on the face side and 12micron metalized polyester on the back side with all edges sealed with the face side PVC Sqr Mtr 587.00 - - 2,072.33 12,16,457.35

film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film

so as to make the tile a completely sealed unit.

Providing and Fixing of Sound Isolation treatment on Wall with 2.5mm sound proofing membrane, density 2000

6 NS-3 kg/cum to be glued/ pasted directly on walls with SR glue complete in all respect as per direction of Engineer-in Sqr Mtr 1,006.00 2,639.70 26,55,538.20 - -

Providing and fixing GI stud framework on walls with GI studs 48x34x36x0.5mm and GI ceiling sections

80x26x51x0.5 mm placed at 600mm c/c to fixed on sound prooofing membrane wall with expandable anchor

7 NS-4 fasteners 65x10mm dia to be fixed on each verticle GI stud @ 1000 mm spacing. The framework cavity to be filled Sqr Mtr 1,235.00 1,451.80 17,92,973.00

with thermal bounded polymer cladding 50mm-1000 GSM complete in all respect as per direction of Engineer-in

Providing and fixing Stretchable acoustical fabric system by using FR Grade NRC 0.90 fabric to be stretched on rigid

vinyl track fixed on 10mm plywood batten (4" wide), to be fixed on pinewood wool boards 20mm thick, square

edge, density 400 Kg/cum to be fixed on GI stud framework (item to be paid separately)

Supply and Installation of wall panelling projected 75 / 100 mm out from faricated wall paneling with 10 mm thick

plywood water proof cut as per drawing given in the 3D views & place at 1500 mm c/c on the 1st wall paneling

with the help of wood work on the paneling . Now paste 9 mm Synth slim poly fiber with the help of stick - 7

adhesive on the basic plywood as per the cut tamplate on the fabricated plywood plate sheet having core

pigmented UV stable acoustic panel of size 1200 x 2400 x 9 mm (approx.) thick fabric with selected colours.

Technical parameters are like Density - 220 kg / m3 , weight - 1.9 Kg/ mt sq , Fire class - A , NRC A mounting - 0.40 ,

Thermal - 0.39 , Climate ( degree C-50 ,RH-99), RC - 30 %, warranty - 5 years selection Choice of colour will be by

engg / arch guidance. Test certificate will be submitted after procurement of materials. Customize item

ANUJ NAVNEET Digitally signed by ANUJ

CHACHA Date: 2022.10.14

Supply and Fixing of 20 mm thick acoustical dry walls, ceiling and panelling different colour patterns with a

combination of four shape randomly placed creates incredible patterns components. Likely dimension 290 -295

/590 - 595 mm having all edges -Square fine level. The density 800 kg/mt cube & weight 12 kg / mt square with fire

class 1 & P, Climate 0C, RH ( 50,95) , NRC - 40 mm C50 - 0.95 to be fixed on 8 mm thick magnesium sports tiles

panel of size 595 x595 mm having density - 1000 kg / sq mt , weight - 8 Kg /mt 2 fire class - 1 & P , NRC - 0.8 ,

Thermal W. mK - 0.12 to be srcrewed with head screw no GI frames as per the specification for fixing

concealed grid wall paneling system. The concealed wall paneling system shall include GI Wall channel(WC25)

approx. dimension thickness 0.45mm, length 3600mm, unequal flanges of 15 & 20mm and web of 25mm should

be fixed along the perimeters of the wall with nylon sleeves and suitable fasteners at every 300mm centers.

10 NS-7 Then fixed Main channels(MC45) having approx. dimensions thickness 0.9mm, length 3600mm, equal flanges of Sqr Mtr 274.00 7,161.20 19,62,168.80 - -

15mm and web 45mm from the side wall & fixed at every 1200mm centers with GI cross channel(CC25) having

thickness 0.45mm, length 3600mm, knurled web 35mm, depth of 25mm (approx.) and equal flanges 9.5mm is

fastened to the Main channel in the direction perpendicular to the Main Channel at every 600mm centers. The

framework will maintain 50 / 75 mm gap from the walls. Now cladding the boards on the CC25 with the help of

screw to get a flush finish. The finishing of the same will be done by using 20 mm dry wall colour on the top. The

synthetic poly fiber PF 5 x 25 wool of 50 kg density & width 600 mm 5000 gsm to be filled between the horizontal

studs as infiller with the help of wire & adhesive.

Supply & fixing of wall paneling wooden slats, high density fiberboard, density 700 kg/cum, FR grade with help of

11 NS-8 Aluminium keel and 2 clips to be fixed on GI stud system (Item to be paid separately) complete in all respect as per Sqr Mtr 372.00 4,487.50 16,69,350.00 - -

direction of Engineer-in-charge

Supply & fixing black acoustical soft fibre ceiling tiles, density 110 kg/cum, size 595x595x15mm, to be laid on T-24

12 NS-9 grid grid suspension system, NRC 0.90, fire rating class A complete in all respect as per direction of Engineer-in- Sqr Mtr 210.00 2,727.70 5,72,817.00 - -

Stage wall treatment: Providing and fixing 2.5mm sound proofing membrane, density 2000 kg/cum to be

13 NS-10 glued/pasted directly on walls with SR glue complete in all respect as per direction of Engineer-in-charge Sqr Mtr 229.00 3,519.60 8,05,988.40

Providing & fixing black acoustical 10 mm thick square edge made from 100% polyethylene terephthalate (PET),

density 100 kg/cum to be fixed on GI stud framework (item to be paid separately) of stage walls with 10mm

14 NS-11 plywood strips of 4" width & SR glue complete in all respect as per direction of Engineer-in-charge (make Techno Sqr Mtr 229.00 1,847.80 4,23,146.20 - -

Acoustics, Anutone)

Fabricating and fixing on the Stage Proescinium having wooden sound slats on the front side and polyethylene

terephthalate (PET) panel 10mm on the back side (black) to be made from cladding of MS hollow pipe

15 NS-12 50x50x2.5mm thickness to be grouted with MS angle brackets on the side wall and floor complete in all respect as kg 1,500.00 118.80 1,78,200.00 - -

per direction of Engineer-in-charge

Providing and fixing wooden flooring over stage starting with 2.5mm sound proofing membrane density 2000 KG/

cum, to be glued/pasted on the concrete stage floor directly with SR glue then fixing MS hollow square pipe

50x50x2.5 mm thick on sound proofing membrane, framework @ 1200x600 mm c/c with neoprene rubber pads

50x50x8 mm: then inserting thermal bonded polyester wadding 50mm thick having density 1000 GSM, inside the

cavity created by MS hollow square pipe framework, then fixing 18mm WPC boards on MS hollow square pipe

framework with self drilling screws, lastly fixing 12mm laminated wooden flooring having density AC5, front edges

of the stage flooring to be finished with elegant Aluminium profiles (matchin colour and shade with wooden

laminated flooring) complete in all respect as per the direction and satisfaciton of the Engineer in charge

Providing & fixing 150 mm Skirting using 12 mm thick BWP ply of reputed make ISI mark. with 1 mm

minimum laminate of reputed make ISI mark . of approved shade, to be fixed as per the drawings on framework

17 NS-14 of 50 X 50 mm GI frame fixed at 300(v) x 600(h)mm (or wherever required as per design drawing) The entire Rmt 820.00 970.30 7,95,646.00 - -

work to be executed as per the drawings and as per direction of the Engineer-in-change.

ANUJ NAVNEET Digitally signed by ANUJ

CHACHA Date: 2022.10.14

Providing and fixing Make In India 100% Nylon loop Pile , Chromojet Printed Carpet with Cottonbac. The rate shall

include height of 6 mm (± 1 mm), Total Height 8 mm (± 1 mm),Stitch / 10 cm 44 /inch (± 2% ), Pile Weight 590 GSM

(± 5% ), Total Weight 1581 GSM (± 5% ), Secondry Backing PP Mesh, Gauge 1/8 Cut Pile, Latex Natural Rubber, Color

18 NS-15 fastness to LightTest Method: AATCC 16 (20 AFU) ≥ 4.0 at 80 Hours , Static Electricity Test Method: AATCC 134 Less Sqr Mtr 828.00 3,613.80 29,92,226.40 - -

than 3.5 KV, Hexapod test Method: ASTM D 5252 ≥ 4, Flammability (Radiant Panel).Test Method: ASTM E 648 ≥

0.45 (Class I) .carpet to be laid with min 6 mm of underlays with Edge Profile and adhesive with necessary sticthing

Product Should carry 10 years of warranty.

Providing and fixing of Polished Aluminium Stairnose with antiskirting sheet fasterning with screw dowels with

19 NS-16 suitable adhesives. Rmt 608.00 2,950.50 17,93,904.00 - -

Providing and fixing Push back seat has a simultaneous movement of seat and back, with an auto stop at all places.

It has lateral movement of the back and an inclined movement of the seat. Back : 15mm bent plywood of size

470X130X640 to 770mm height. Seat : 19mm plywood seat, size 480X490X19mm. Handles : 490 X100 X

20 NS-17 70mm with counter sunk numbering with 20mm dia and inner with 12mm plywood 95 X 300mm duly Nos 760 18,574.10 141,16,316.00 - -

cushioned / upholstered.Installation : For installation, chairs are bolted to the ground using chemical fasteners of

Hilti or fischer and as per approved drawing, design and secification and instruction of Engineer in Charge.

Two Seater Sofa in State Head Cabin Base: SS 304 legs, Frame: Hardwood Foam Density 50mm,

Upholstery : Natural leather of apporved quality & Shade Size : 1500mmW x 750mmD x 750mmH.

REVOLVING CHAIR : Supply and installation of mid back chair:The seat & back is made up of 1.2 ± 0.1cm thk. hot

pressed plywood measured as per QA method described in OCP-QLTA-PL14-18 ; upholstered with synthetic leather

over moulded High Resilience Polyurethane foam.BACK SIZE: 51.8 cm. (W) x 65.7 cm. (H).SEAT SIZE : 49.0 cm. (W) x

51.4 cm. (D).The HR polyurethane foam is moulded with density =55+/-2 kg/m³ and hardness 16 ± 2 kgf as per

IS:7888 for 25% compression.The adjustable armrest is designed with the following features :Up-Down

adjustment– 8 steps (8.0±0.5cm range).Height adjustable armrest structure which is chrome plated & fitted

with an armrest top.Fixed Armrest Top is PU moulded over metal insert.The adjustable tilting mechanism is

designed with the following features.360° revolving type.Single point control.Front-pivot for tilt with feet resting on

22 NS-19 ground ensuring more comfort.Tilt tension adjustment.4-position locking with anti-shock feature.Seat/back tilting Nos 10 26,237.40 2,62,374.00 - -

ratio of 1:2.Back can be adjusted in 5 positions by manually.Stroke of height adjustable spine is 7 cm. Back

height adjustability is applicable for for High back and Mid back chair.The pneumatic height adjustment has

an adjustment stroke of 10.0 ± 0.3 cm.The pedestal is High Pressure Die cast polished Aluminium and fitted with

5 nos. twin wheel castors. The pedestal is 65.0 ± 0.5cm. pitch-center dia.(75.0 ± 1.0cm. With castors.).The twin

wheel castors are injection moulded in black PP.Complete as per proposed layout and direction of Engineer in

Supply & Placement of o Insatalled Coffee table: TOP: Overall size: 1200x600x450. Sheesham 18 mm. LEGS: 80X80

23 NS-20 Top Side 40X40 Bottom Side Support 45x25mm & 8 Pcs Bolt & Nut as per direction of Engineer - in - Charge. Nos 5 46,039.20 2,30,196.00 - -

Providing and fixing in position hardwood flush sound proof door having over all thickness 65 mm shutter

inner frame made of hard wood and filled with rock wool (density 96 Kg/Cu.m.) as insulation (for acoustic

insulation with Anechoic barrier designed to achieve shielding effectiveness 25-35 dB) and covered with 4 mm

veneer on both side including provision of vision pannel with toughened glass 200 x 300 mm and door frame

24 NS-21 made out of teak wood having profile of 140 mm x 70 mm, 65 mm thick including ISI marked SS hinges (heavy Sqr Mtr 63 29,504.70 18,58,796.10 - -

type) with necessary 40 mm SS screws,Including fitting i.e.fire registance Handle, Locking arrengement in all

complete. Fixing with flat Iron hold fast 40cm. long i/c fixing to frame with 10mm dia bolts, nut and embedding in

cement concrete block 30X10X15 cm. as per direction of Engineer in charge.

ANUJ NAVNEET Digitally signed by ANUJ

CHACHA Date: 2022.10.14

S.No Description Unit Qty NS Rate Amount Amount

STAGE FURNISHING &STAGE LIGHTING

SITC of MAIN CURTAIN made out of fire retardant velvet curtain cloth with horizontal sliding

arrangement complete with fixing curved rails, brackets, sliding arrangement & motorised

operation complete with runners, master runners, pullies, 3mm steel wire rope, 1 HP motor

(Crompton) 2nos. air breaker contactors , 2nos. micro switches for auto stop, 3 nos push buttons

1.0 for forward, reverse and stop positions. The curtain should be draped to half area when in closed Each 1.00 5,62,936.30 5,62,936.30 - -

position. Minimum overlap at centre should be 900mm and should be stitched in double gathering,

with vertical lifting arrangement.

SITC REAR CURTAIN made out of fire retardant Glazed Cotton / crepe Cloth with Horizontal Sliding

arrangement with Motorized Operation with extruded Aluminum Track (I- Section with centre web of

approximate size 60 x 80 mm) centre parting with 1 Meter overlap and mounting arrangement to fix

on existing grid. The system shall be complete with Electro-Mechanical drive with 1 HP Single

Phase AC Motor (Crompton), Compact Gear Box, Belt driven grooved cable drum suitable for 3mm Dia.

Wire Rope, Master / Slave Curtain Trollies, diverting Pulley, Low-Voltage Magnetic Control System for

2.0 operation of Curtain Mechanism, Limit Switches, Air Break Contactors (L&T / Siemens) complete Each 1.00 3,73,749.80 3,73,749.80 - -

with low-voltage magnetic control push station for operation from more than one location with Touch

Panel. The Curtain should be draped to half area when in closed position and should be stitched in

double gathering.

SITC M.S. Pipe Ladders to be provided on sides of the Stage to be fixed on the existing GI pipe

or top grid. Made of 50mm x 25mm MS pipe.

SITC of Cat Walk Fabrication:- A bridge fabricated from structural steel of 2.5” width and length

according to the Auditorium for holding stage lights in front of stage, approach to cat walk is given from

4 sides with help of ladder, lighting bar is fixed on the cat walk to hold the stage light and give focus on Rmt 165 10,574.20 17,44,743.00 - -

centre of stage with ¾” Ply, wood on cat walks fabricated above ceiling duly fixed with screws and Cable

Providing and fixing of cloth wings made out of black glazed cotton cloth fixed on 6mm thick

commercial plywood fixed on one side of MS 50mm x 25mmx 16G pipe wielded frame work. The pipe

5.0 framework made out of 25mm x 50 mm pipe. c/c 900 x 900 fixed with overhead pivote track Each 6.00 44,998.50 2,69,991.00 - -

complete with duly painted on both framework.

2100 x 8500 FRILLS :- Providing and fixing average frills made out of double gathering glazed cotton

6 cloth to be installed above the stage on 25mm dia GI pipe. Each 4.00 57,623.30 2,30,493.20 - -

Providing and Fixing of Motorized Hosting System for Lighting/ Set Scenery/ Frill Bar with pullies

master pulley with 5/6mm wire rope for each pulley 8 mm wire rope master pulley 2 hp 3 phase

7.0 motor Crompton, 2 nos air breaker contactor Siemens or LT micro switch for auto stop Drum Each 4.00 1,12,780.10 4,51,120.40 - -

threaded mechanisation, frame clumps nut bolt complete in all respects.

ANUJ NAVNEET Digitally signed by ANUJ

NAVNEET CHACHABOQ-Stage

CHACHA Date: 2022.10.14

S.No Description Unit Qty NS Rate Amount Amount

Providing and Fixing of GI / MS Grid over the stage for supporting stage equipment in position with 50mm

dia GI pipe / 50 x 50 x 5 mm angle / 40 x 6 mm structure with welded connection, suspended

8.0 from ceiling structure/ slab by MS flat suspenders with expansion fasteners, centre to centre distance (1 kg 750.00 173.50 1,30,125.00 - -

Mtr - 1.2 Mtr), fixed to wall/beam support with MS plate with expansion fasteners etc. painted black with 2

coats of paint and coat of primer

Providing and Fixing of 200 W CE Certified LED FRESNEL LIGHT 200W cool white LED, Life: More than

30000 hrs, Field Angle: Spot Light (1/10 peak), 29-degrees; Soft Light (1/10 peak) ? 97- degrees,

9.0 Manual zoom, Color Temperature: 5000K, Color Rendering Index: Ra=84, Dimmer: 0-100% linearly Each 8.00 36,534.40 2,92,275.20 - -

adjustable, Channel: 1 channel for dimmer, Housing: High- intensity die-casting, aluminum, IP20

complete with suitable clamp.

Providing and Fixing of LED Profile Light CE Certified (3000°K), having Lumensity of 12,000 lux at 2mtr with

10.00 zoom angle of 20° / 36° with electronic full range AC 90-260 V, 50 Hz power supply & Each 4.00 41,640.90 1,66,563.60 - -