Repairing and Maintenance of EI Fan ,misc. Electrical items On Call Basis under Electrical Division, Bhopal

Amount

SUB HEAD-I: SITE VISIT

Attending complaint and checking of faults of Electrical Infrastructure by skilled technician, rectification of minor faults/wiring etc. as reqd . ( Note :- The item shall be measured from subdivision HQ ( i.e Bhopal ) for one side distance only )

NOTE: This item shall be measured for verification of initial defect of Electrical Infrastructure at a site. For subsequent visit to attend the Electrical Infrastructure fault at the site will not be paid separately. It is assumed that all the items required to clear the fault have been identified by the agency during first visit. Any subsequent visit required shall be borne by the agency.

Upto 50 kms

Above 50 to 100 kms

Above 100 kms

SUB HEAD-II: WIRING

Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel conduit/PVC Conduit including dismantling as required.

Group B

Group C

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.

2 x 1.5 sq. mm

3 x 1.5 sq. mm

4 x 1.5 sq. mm

5 x 1.5 sq. mm

6 x 1.5 sq. mm

3 x 4 sq. mm

6 x 4 sq. mm

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

Supplying and fixing of following sizes of medium class PVC Casing Capping along with accessories in surface as required.

20 mm x 12 mm

25 mm x 16 mm

30 mm x 16 mm

Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required.

5/6 amps switch

15/16 amp switch

3 pin 5/6 amp socket outlet

6 pin 15/16 amp socket outlet

Bell push

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

5/6 amps switch

15/16 amp switch

3 pin 5/6 amp socket outlet

6 pin 15/16 amp socket outlet

Bell push

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.

1 or 2 Module (75mmX75mm)

3 Module (100mmX75mm)

4 Module (125mmX75mm)

6 Module (200mmX75mm)

8 Module (125mmX125mm)

12 Module (200mmX150mm)

Supplying and fixing musical/Ding Dong call bell suitable for D.C./A.C. single phase, 230 volts, complete as required.

Supplying and fixing Two Module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required.

Supplying and fixing brass batten/ angle holder including connection etc. as required.

Supplying and fixing PVC batten/ angle holder including connection etc. as required.

Supplying and laying 3X2.5 sqmm copper conductor round flexible multistrand unarmoured pvc insulated and PVCX sheathed copper cable on surface for electrical connection as reqd. cable

Supplying and laying 3X1.5 sqmm copper conductor round flexible multistrand unarmoured pvc insulated and PVC sheathed copper cable on surface for electrical connection as reqd. cable

SUB HEAD-III (Distribution System)

Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required

100 Amp rating, four pole, MCCB with variable Thermal-Magnetic Release, (Release Range 25-32,50-63,80-100A) breaking capacity 25KA at 415V, 50HZ, AC Supply and Conforms to IS/IEC 60947-2 (Make and Model ,M/s L&T DN0-100C or equivalent similar superior make) with (Ics = 100% Icu)

160 Amp rating, four pole, MCCB with variable Thermal-Magnetic Release, (Release Range 125-160A) breaking capacity 36KA at 415V, 50HZ, AC Supply and Conforms to IS/IEC 60947-2 (Make and Model ,M/s L&T DN2-250D or equivalent similar superior make) with (Ics = 100% Icu)

250 Amp rating, four pole, MCCB with variable Thermal-Magnetic Release, (Release Range 200 -250A) breaking capacity 36KA at 415V, 50HZ, AC Supply and Conforms to IS/IEC 60947-2 (Make and Model ,M/s L&T DN2-250D or equivalent similar superior make) with (Ics = 100% Icu)

Supplying and fixing surface/ recess mounting, vertical type, 415 volts, sheet steel enclosure for following rating of 3P and 4P MCCBs with in-built neutral Link for TPN system.

Suitable up to 125A MCCBs, 36kA

Suitable from 160A to 250A MCCBs, 50kA

Supplying and fixing following way, horizontal type SPN / TPN, sheet steel, MCB distribution board, 240/ 415 volts, on surface/ recess, complete with metal door, tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/ RCCB/ Isolator)

8 Way SPN Double Door

12 Way SPN Double Door

4 Way TPN (4+12) Double Door

6 Way TPN (4+18) Double Door

Supplying and fixing following ways surface/ recess mounting, vertical type, 415 volts, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 amps tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB's, with provision of 100 amps TP 16 KA MCCB as incomer, interconnection between incomer MCCB and bus bars (Without MCB's but with MCCB) as required. (Note: Vertical type MCB TPDB is normally used where 3 phase outlets are required)

4 Way (4+12) Double Door

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Single pole

Single pole and neutral

Triple pole

Triple pole and neutral

Supplying and fixing following rating, SPN, 415 V, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing following rating, TPN, 415 V, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/32amps 240 volts "C" curve SPN MCB complete with connections, testing and commissioning etc. as required.

Supplying and fixing FP sheet steel enclosure on surface/ recess along with 16/25/32amps 415 volts "C" curve TPN MCB complete with connections, testing and commissioning etc. as required.

Replace ment of following items in the existing panel / wall to accodate the service cable termination

63 Amp fuse unit along with base including lugs ring type and interconnections.

100 Amp fuse unit along with base including lugs ring type and interconnections.

Neutral link

Metallic Flexible pipe

6 mm thick Phenolic sheet

Supplying and fixing of 1 No. TP&N of following capacity Switch fuse unit with rewirable Porcelein Fuse Units in sheet steel enclosure suitable for 415 volts including interconnections, testing etc complete as required.

Supplying and fixing of following capacity On-load 4 pole, Changeover Switch in sheet steel enclosure complete as required.

SUB HEAD-IV (EARTHING)

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. as required.

Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)

Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required.

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.

SUB HEAD-V (SUPPLYING AND LAYING CABLE)

Supplying of following sizes XLPE insulated PVC inner sheathed Copper/Aluminium conductor Armoured /un-Armoured cable of 650/1100V grade conforming to IS: 7098(Part 1) 1988 WITH UPTO DATE AMENDMENTS etc. as required.

2x6 Sq.mm Aluminium Conductor Armoured Cable

2x 16 Sq.mm Aluminium Conductor Armoured Cable

4 x16 Sq.mm. Aluminium Conductor Armoured Cable

3.5x25 Sq.mm Aluminium Conductor Armoured Cable

3.5 x35 Sq.mm. Aluminium Conductor Armoured Cable

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.

Upto 35 sq. mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required.

Upto 35 sq. mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct as required.

Upto 35 sq. mm

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required.

Upto 35 sq. mm (clamped with 1mm thick saddle)

Supplying and making indoor end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.

2 X 6 sq. mm (19mm)

2 X 16 sq. mm (22mm)

4 X 16 sq. mm (28mm)

3½ X 25 sq. mm (28mm)

3½ X 35 sq. mm (32mm)

SUB HEAD-VI (FAN & FITTINGS)

Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.

Supply, Installation, Testing and Commissioning of 4 feet, 20 Watts (+/- 2 Watts) energy efficient linear box LED batten light having 6500K colour temp., minimum 1900 Lumens, 95 Lumen/watt efficacy and 0.9 power factor along with all accessories suitable for operation on 230 Volts, 50 Hz Single Phase AC Supply complete as required.

Pdg and fixing 2.5 mfd capacitor for ceiling fan for Ceiling fan

Providing and Fixing 400 MM sweep wall mounted fan suitable for operation on 1 phase 50 Hertz AC supply with all accessories asreqd. ( Bajaj / Crompton / Usha / Havells/ Almonard or S.S. make )

Providing and Fixing of 300 MM sweep, 900 rpm ,industrial type exhaust fan suitable for operation on 1 phase, 50 hertz , 220-230 Volt AC supply in existing opening as reqd.(Crompton, Bajaj, Havells, Almonard or S.S.Make)

Providing and Fixing of 450 MM sweep, 1440 rpm, industrial type Metal body Pedestal fan suitable for operation on 1 phase, 50 hertz , 220-230 Volt AC supply in existing opening as reqd.(Crompton, Bajaj, Havells, Almonard or S.S.Make)

Supplying and Fixing Single phase Electronic Energy Meter Sub meter with LCD Display 5 -30 Amp ( L & T, Schneider, HPL Make ) on suitable wooden board etc as reqd .

Supplying and Fixing 3Ph Electronic Energy Meter Sub meter with LCD Display 10- 60 A ( L & T, Schneider, HPL Make ) on suitable wooden board etc as reqd .

Providing & fixing cubical type Energy Meter box made of 16 SWG M.S. sheet of not less than 600 mm X 400 mm x 250 mm Approximately )suitable for 3 phase 4 wire Energy Meter suitable for accomodating energy meter ,interconnection as reqd.( Note: The Energy Meter box shall be made with two compartment. Provision shall be made for locking & meter reading in Energy Meter compartment)(Drawing of the Energy Meter Box shall be got approved before fabrication )

Supplying one no. LED Street Light Luminaire of nominal wattage 30W ± 15% with aluminium housing & lens embedded PC cover having IP65 protection , suitable for operation on 230volts, , 50 HZ, Single phase, AC supply i/c Installation the same on the existing bracket on the pole upto 9Metre height , making interconnections, testing,Commissioning etc as reqd at site . (Preferred makes SYSKA/Wipro/ Havells/ Crompton/ Bajaj/ Osram or Similar Superior Make)

Supplying and fixing of G.I bracket for mounting of LED street light fitting on wall fabricated out of 32mm dia G.I pipe (medium class) of 1 Meter length having suitable machine made curve with suitable size of reducers, 40mmx3mm flat iron clamp and shall be painted with two coats of red oxide and two coats of aluminium paint including numbering complete as required.

Supplying and fixing M.S. Frame of size 35mm x 35mm x 5mm of angle I/c cutting, welding & painting complete as per requirement at site.