Proposed Construction and Interior works of Auditorium (Natya Graha) with Exibition Hall etc Station Road at Parbhani

Amount

Excavation for foundation in earth, soils of all types sand, gravel and soft murum including removing the excavated material upto a distance of 50 m. beyond the building area and all lifts stacking and spreading as directed, dewatering, shoring, strutting and preparing the bed for the foundation and necessary back filling, ramming, watering (Including shoring and strutting) etc. complete. (Lift Upto 1.50Metre) Spec No. Bd. A .1 Page No. 259 S.S.R. Item No.21.02 Page.No.150

Excavation for foundation in hard murum including removing the excavated materials upto distance of 50 meters beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.50 m). Spec No. Bd. A .2 Page No. 259 S.S.R. Item No.21.06Page.No.150

Filling in plinth and floors with approved excavated materials in 15 cm to 20 cm layers including watering and compaction complete. [Spec.No. :Bd.A.10 Page No.262 ] S.S.R. Item No.21.36 Page.No.154

Filling in plinth and floors with contractors soil sand or murum in 15 cm to 20cm. layers including watering and compaction complete. Spec No. Bd.A.11 Page No. 263 S.S.R. Item No.21.37 Page.No.154

Providing soling using 80 mm size trap metal in 15 cm.layer including filling voids with sand/ grit ramming, watering complete. Spec No. As directed by Engineer in charge. S.S.R. Item No.21.40 Page.No.154

Providing and laying Cast in situ/Ready Mix cement concrete inM-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, laying/pumping,compacting, roughening them if special finish is to be provided,finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversibleDrum Type mixer/concrete Batch mix plant (Pan mixer) etc.complete. With natural sand/V.S.I. quality Artificial Sand Bd. E. 1 Page No. 287 S.S.R. Item No.24.01 Page.No.177

Providing and laying in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc.complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concreteBatch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I.quality Artificial Sand Bd.F.3 Page No. 298 and B.7,Page No.38 S.S.R. Item No.25.11 Page.No.182

Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand Bd.F.5 Page No. 300 and B.7,Page.No. 38 S.S.R. Item No.25.31 Page.No.185 Ground Floor

First Floor

Second Floor

Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. beamsand lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks, laying/pumping,compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With naturalsand/V.S.I. quality Artificial Sand Bd.F.6 Page No. 300 and B.7,Page No.38 S.S.R. Item No.25.5 Page.No.188 Ground Floor

First Floor

Second Floor

Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including centering, formwork, cover blocks, laying/pumping, compactionfinishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand Bd.F.8 Page No. 302 and B.7,Page No.38 S.S.R. Item No.25.70 Page.No.190 Ground Floor

First Floor

Second Floor

Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. pardi of required thickness including centering, formwork, cover blocks,laying/pumping, compacting , curing , finishing androugheningthem if special finish is to be provided and curingcomplete.(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADAenabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. qualityArtificial Sand Bd.F.11 Page No. 304 and B.7,Page No. 38 S.S.R. Item No.26.17 Page No.194 Ground Floor

First Floor

Second Floor

Providing and fixing in position T.M.T. bar reinforcement of various diameters for reinforced cement concrete pile caps, footings, foundation, slabs, beams, columns, canopies, stair case, newels, chajja, lintels, pardi, copings, fins, arhes etc. as per detailed designs, drawings and schedules including cutting bending, hooking the bars, binding with wires or tack welding and supporting as required complete. Spec No. : Bd.F.17 Page No.306. S.S.R. Item No.26.33 Page No.199 Ground Floor

First Floor

Second Floor

Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap / quartzite /granite /gneiss metal for R.C.C. Waistslab, and steps of staircases as per detailed design and drawings or as directed including steel centering, plywood/ steel formwork, steel props, laying/pumping, compaction, finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete. (Excluding einforcement, including cover block).(Newly laid concrete shall be covered by gunny bag,plastic, tarpaulin etc.) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand Bd. F. 13 Page No. 305 /I.S. 456(2000 S.S.R. Item No.26.25 Page No.196 Ground Floor

First Floor

Second Floor

Providing water proof bedding for flooring of Bath and WC 25mm thick in C.M. 1:3 including using approved water proofing compound in specified proportion as per manufacturers specifications for per bag of cement including leveling, curing and covering 10 years guarantee on court fee stamp paper of Rs.500/- including ponding test etc. complete. S.S.R. Item No.31.05 Page No.220 Ground Floor

First Floor

Second Floor

Providing fly ash brick masonry with conventional / I.S. type fly ash bricks in C.M. 1:6 in foundation and plinth including bailing out water manually striking joints, racking out joints watering and scaffolding etc. complete. S.S.R. Item No27.12 Page No.213 Ground Floor

Providing fly ash brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete S.S.R. Item No.27.13 Page No.213 Ground Floor

First Floor

Second Floor

Providing Second class fly ash brick masonry with conventional / I.S. type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of two bars of 6 mm diameter / two hoop iron strips 25 mm x 1.60 mm at every third course, properly bent and bounded at ends scaffolding raking out joints and watering etc. complete. S.S.R. Item No27.14 Page No.213 Ground Floor

First Floor

Second Floor

Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing complete. Spec. No. Bd.L.2A Page No.368 S.S.R. Item No.32.04 Page No.224 Ground Floor

First Floor

Second Floor

Providing neeru finish to plastered surfaces in all positions including scaffolding and curing complete. Bd.L.10 Page No.370 S.S.R. Item No.32.15 Page No.225 Ground Floor

First Floor

Second Floor

Providing sand faced plaster externally in cement mortar using Kharsalia/Kasaba or similar type of sand, in all positions including base coat of 15mm thick in C.M. 1:4 using waterproofing compound at 1kg.per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8mm thick in C.M. 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc. complete. Bd.L.7 Page No.367. S.S.R. Item No.32.11 Page No. 224 Ground Floor

First Floor

Second Floor

Providing and fixing frame with / without ventilator of size as specified with Country cut teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm with oil painting, etc. complete . As directed by Engineer in charge. S.S.R. Item No.39.01 Page No.259 Ground Floor

First Floor

Second Floor

Providing and fixing solid core flush door shutter in single leaf 32mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc. complete. BD-T-34 Page No. 499 S.S.R. Item No.39.01 Page No.261 Ground Floor

First Floor

Second Floor

Providing and fixing Country cut teak wood double or single leaf second class fully panelled door shutter with 35mm thick style and rail with 25 mm thick panels with openable fan light as per detailed drawings. Excluding the door frame 60mm x100mm stainless steel fixtures and fastening and finishing the wood work with oil painting 3 coats. (Excluding the door frame) BD-T-7 and 8 Page No. 481-82 S.S.R. Item No.39.04 Page No.260 Ground Floor

First Floor

Second Floor

Providing and fixing fiber glass reinforced polyster door shutter 30 mm thick as per IS 14856 (2000) (Reaffirmed 2006) withoutventilator including chromium plated fixtures and fastening with chromium plated handles on both sides, etccomplete [Spec.No. :As directed by Engineer in charge S.S.R. Item No.39.58 Page No.274 Ground Floor

First Floor

Second Floor

Providing and fixing in position (as per 1868 / 1982) Alluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x0.90 mm at weight 0.637 kg/Rmt. with window frame bottom track section 92 x 31.75 x 1.30 mm at weight 1.070 kg/Rmt.. Top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 kg/Rmt. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt. and handle and top section 40 x 18 x 1.25 mm at weight o.417 kg/Rmt. As per detailed drawings and as directed by Engineerincharge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc, complete. With colour Anodising with box As directed by Engineer in charge. S.S.R. Item No.39.41 Page No.269 Ground Floor

First Floor

Second Floor

Providing and laying ceramic tiles of having size 30 cm x 30 cm confirming to I.S.15622/2006 (group D II-A) and 7 to 8 mm thick for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with white/colour cement slurry cleaning curing etc. complete.. Bd.M.12 Page No. 385. S.S.R. Item No.33.24 Page No.231 Ground Floor

First Floor

Second Floor

Providing and laying ceramic tiles of having size 30 cm. x 30 cm. and confirming to corresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete. Bd.M.13 Page No. 386 .S.S.R. Item No.33.26 Page No.231 Ground Floor

First Floor

Second Floor

Providing and applying two coats of exterior acraylic emulsion paint confirming to corresponding I.S. of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface, applying primer coat ,scaffolding if necessary , and watering the surface for two days etc complete.As directed by Engineer in charge S.S.R. Item No.35.25 Page No. 242 Ground Floor

First Floor

Second Floor

Providing and applying plastic emulsion paint of approved quality, colour and shade to old/new surfaces in two coats including scaffolding, preparing the surface. (excluding the primer coat) complete. Bd.P.6 Page No.414. For new surface S.S.R. Item No. 36.12 Page No. 244 Ground Floor

First Floor

Second Floor

Providing and laying telephone black / Amba White / Cadburybrown / Ruby red / Ocean Brown granite stone of 18 to 20 mm thick for door frame/ dado/ window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing the sharp edges wherever necessary, curing, etc. complete. As directed by Engineer-In-Charg S.S.R. Item No. 33.68 Page No. 237 Ground Floor

First Floor

Second Floor

Providing and laying in position flooring of telephone black /Amba White / Cat bary brown / Ruby red / Ocean Brown granite stone of approved shade and size 18 mm to 20 mm thick on bed 1:6 cement mortar including cement floats striking joints, pointing in C.M. 1:3 curing and cleaning etc. complete.Bd.M. 3 B/Page No. 380 S.S.R. Item No. 33.34 Page No. 232 a) flooring Ground Floor

b) skirting & Dado Ground Floor

First Floor

Second Floor

Providing and fixing machine cut machine polished 18 mm to 20 mm thick telephone black / Amba White / Cat bary brown /RBI red / Ocean Brown granite stone for treads and risers of steps and staircases of approved colour and shade with rounded moulding and three grooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neatcement slurry curing polishing and cleaning etc. complete. Bd. M.22 B/Page No. 390 S.S.R. Item No. 33.35 Page No. 232 Ground Floor

First Floor

Second Floor

Providing cement based water proofing treatment to terrace (India Water Proofing) with brick bats laid in required slope to drain the water for any span after cleaning the base surface applying a coat of cement slurry and mixed with approved water proofing compound and laying the brick bats on bottom layer of C.M. 1:5 and mixed with approved water proofing compound, filling upto half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer, jointing of brick bats with C.M. 1:3, and mixed with approved water proofing compound and finally top finishing with average 20 mm thick layer of same mortar including finishing the surface, smooth with cement slurry and mixed with approved water proofing compound, marking the finished surface with false squares of 300mm x 300mm, marking the junctions at the parapets rounded and tapered towards top for required height with drip mould at the junction of plaster and curing etc. complete with a guarantee of seven years. Spec. No. As directed by Engineer in charge S.S.R. Item No. 31.04 Page. No.220 Second Floor

Providing and fixing mild steel grill work for windows, ventilators etc. 20kg/SQ.M. as per drawing including fixtures, necessary welding and painting with one coat of anticorrosive paint and two coats of oil painting complete. Bd.U.1 Page No.537. S.S.R. Item No. 40.01 Page. No.281 Ground Floor

First Floor

Second Floor

Providing structural steel work in trusses, other similar trussed purlins and members with all bracing, gusset plates etc. as per detailed designs and drawings or as directed including cutting, fabricating, hoisting, erecting fixing in position, Making riveted/ bolted/ welded connection and one coat of anticorrosive paint and over it 2 coats of oil painting complete. Spec No.: Bd.C.8 Page No.278 S.S.R. Item No. 23.04 Page. No.175 Second Floor

Providing and fixing colour coated Zincalume ( R ) AZ150 ( min150 gms/sq.mt. total on each side ) profiled sheets for roofing.The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness ( BMT ) (0.5 mm TCT ), Hi-strength steel with min.550 MPa yield strength, metallic hot dip coated withAluminium-Zinc alloy (55% aluminium 43.4% zinc 1.6% silicon) with COLORBOND ( R ) steel quality super durable polyester paint coat ( with inorganic pigment). The paint shall have a total coating thickness of nominal 35 um, comprising of nominal 25 um exterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950-1050 mm effective cover width and nominal 25-30 mm deep ribs with subtle square fluting in the five pan at nominal 180-250 mm center-to-center. The end rib shall be designed for anticapillary groove. and return leg. The feed material should have coil manufacturers product details marked a regular interval. Including fasteners with min. fastened with min. 25 um Zinc-Tin alloy coated, Hex head, self-drilling screw etc. complete.(weight of profile 4.52 kg/sqm) S.S.R. Item No. 38.34 Page. No.252 Second Floor

Providing and laying cement concrete flooring 50 mm thick with M15 cement concrete laid to proper level and slope in alternate bays including compaction filling joints, marking lines to give the appearance of tiles of 30cm x 30cm or other size laid diagonally/square etc finishing smooth (with extra cement) in any colour as directed and curing etc. complete. With Crushed Sand. Bd.M.7 Page No. 383 S.S.R. Item No. 33.14 Page. No.230 Ground Floor

First Floor

Providing and laying vitrified matt fininsh tiles having size 590 mm to 605 mm x to 605 mm of 8 to 10 mm thickness and confirming IS. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement morar including neat cement float, filling joints, curing and cleaning etc. complete. a) Flooring Bd.M.12 Page No. 385 S.S.R. Item No. 33.42 Page. No.233 Ground Floor

First Floor

Second Floor

Providing and laying vitrified matt finish tiles having size 590 mm to 605 mm x to 605 mm of 8 to 10 mm thickness and confirming IS. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc. complete. b) Skirting S.S.R. Item No. 33.43 Page. No.233 Ground Floor

First Floor

Second Floor

Providing and applying 2 coats of flat oil paint of approved colour to the old structural steel work and iron work previously painted in building including scaffolding, if necessary, cleaning and preparing the surface (excluding primer coat) complete Bd.0.6 Page No. 406 S.S.R. Item No. 35.09 Page. No.241 second floor

Providing and fixing collapsible steel gate in one / two leaves with hot rolled vertical channels of 18 x 9 x 3 mm minimum size, crossings of M.S. flats of size 18 x 5 mm T or E section for runner of minimum 40 x 6 mm size for flange, M.S. flat for top runner of minimum size 40 x 12 mm with roller wheels confirming to grade F.G. 150 fitted with snap headed rivets of minimum size 6 mm max. spacing of vertical channels be 100 mm enclosed gate position and clear space of 150 mm between two sets of crossings with hold fasts, stoppers, spaces, handles, locking arrangement and one coat of red lead primer and oil painting etc. complete. (I.S. 105211983). S.S.R. Item No. 39.26 Page. No.265 Ground Floor

Providing and fixing Stainless Steel railing of 304 grade 50 with top and vertical pipe of 50mm dia at 0.90 m c/c or as required and horizontal pipes of 25mm dia in two rows, all pipes of 2 m thick including buffing,fabriating,welding, fixture,erecting,paint and two coats of oil painting with approved colour and polished the sill,hand rail and the newel post with french polish S.S.R. Item No. 40.07 Page. No.282 Ground Floor

First Floor

second floor

Providing and fixing factory made Hydraulically pressed Mechanically vibrated and compacted precast inter locking cement concrete paving blocks 80MM thick in M-40 grade of approved size and shape for City streets, small /medium market roads,low volume roads, utility cuts on arterial roads etc. as specified and as per IS 15658:2006 including cost of all materials, manufacturing, curing, transportation of blocks to work site including loading, unloading and stacking as directed, laying paving blocks in position over prepared bed of natural sand / crushed sand of 50 mm thickness including necessary excavation in all stratas, spreading blindge of fine sand over the prepared bed, compacting blocks by plate vibrator etc. complete.IRC-SP-63 S.S.R. Item No. 5.20 Page. No.45 Ground Floor

Providing and laying in situ cement concrete M -30 with tremix treatment for 200 mm thickness for Concrete Road is including laying plastic sheet for 125 micron thickness with groove cutting of 4 mm wide and 20 mm deep with necessary refilling with bitumen ( excluding reinforcement) with Natural sand etc. complete MORTH 602 S.S.R. Item No. 5.22 Page. No.45 Ground Floor

PLUMBING AND SANITATION MJP DSR Item No 6 Page No. 215 Providing and constructing on sewer, B.B. Masonry Masonry circular Manhole concentric cone 1.2 m dia at bottom and 0.5 m dia at top and upto a depth of 2.00 m with 23cm brick work in cm 1:4 proportion excluding excavation including foundation concrete 250mm thick and hunches and channels in c.c.1:2:4 proportion finishing channels in smooth rendering providing C.I. dapuri type steps each weigning 5.5 kg 1:2:4 coping and providing and fixing approved make and quality S.F.R.C. frame and cver of 56 cm dia. Etc. complete as Directed by engineer in charge a) Rebate for every decrease in depth of 50cm or part thereof Ground Floor

Providing and constructing Brick Masonry Inspection Chamber 90cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W.pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete with R.C.C. Cover medium duty 140 kg with frame etc complete. Bd.V.43 Page No.574. S.S.R. Item No. 42.13 Page. No.294 Ground Floor

Providing and constructing Brick Masonry inspection trap Chamber 90cm x 45cm including 1:4:8 C.C foundation, 1:2:4 C.C.channels/half round glazed stoneware pipe channel, salt glazed stone-ware intercepting trap with rodding pipe set in 1:4:8 cement concrete block, brick masonry plastering inside and Outside, fixed in cement concrete with R.C.C. Cover medium duty 140 kg. etc complete Bd.V.44 Page No.575 S.S.R. Item No. 42.15 Page. No.294

Providing and fixing European type white glazed earthenware water closet pan with UPVC seat and lid with chromium plated brass hinges and rubber buffers including UPVC and vent pipe up to the outside face of wall 10 litre enameled low level flushing cistern with fittings pipe stop tap brackets for fixing cistern 32 mm dia. UPVC flush pipe with fittings and clamps ,20 mm dia.UPVC overflow pipe ,mosquito proof couplings G.I. chain and pulley,with water Jet and fitting including cutting and making good to the walls and floors testing etc. complete.(prior approval of sample and brand by Ex. Engineer is necessary before use) S.S.R. Item No. 43.19 Page. No.308 Ground Floor

First Floor

Second Floor

Providing and fixing on walls/ ceiling/ floors, 15 mm dia. heavy grade having embossed as ISI Mark galvanised iron pipes weight of 1.48 Kg/metre with necessary fittings. remaking good the demolished portion and applying primer of anti-corrosive oil paint 2 coats Including necessary scaffolding and removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. Bd.V.5 Page No. 551 S.S.R. Item No.44.10 Page No.284

Providing and fixing on walls/ ceiling/ floors, 20 mm dia. heavy grade having embossed as ISI Mark galvanised iron pipes weight of 1.48 Kg/metre with necessary fittings. remaking good the demolished portion and applying primer of anti-corrosive oil paint 2 coats Including necessary scaffolding and removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. Bd.V.5 Page No. 551 S.S.R. Item No.44.11 Page No.284

Providing and fixing on walls/ ceiling/ floors, 25 mm dia. heavy grade having embossed as ISI Mark galvanised iron pipes weight of 1.48 Kg/metre with necessary fittings. remaking good the demolished portion and applying primer of anti-corrosive oil paint 2 coats Including necessary scaffolding and removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. Bd.V.5 Page No. 551 S.S.R. Item No.44.12 Page No.284

Providing and fixing on walls/ ceiling/ floors, 50 mm dia. heavy grade having embossed as ISI Mark galvanised iron pipes weight of 1.48 Kg/metre with necessary fittings. remaking good the demolished portion and applying primer of anti-corrosive oil paint 2 coats Including necessary scaffolding and removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. Bd.V.5 Page No. 551 S.S.R. Item No.44.15 Page No.285

Providing and laying for 150 mm dia salt glazed stoneware pipe including fittings Such as bends, tees, single junction, double junctions laying, jointing (including excavation and refilling the trenches) complete.. Bd.V.39 Page No.573. S.S.R. Item No.42.04 Page No.293

Providing and fixing 10cm C.I. Nahani Trap including grating bend and piece of C.I. pipe upto the outside face of the wall complete (with 45cm arm). Bd.V.32 Page No.567 .S.S.R. Item No.41.80 Page No.292 Ground Floor

First Floor

Second Floor

Providing and fixing 15cm x 10cm salt glazed stoneware gully trap in cement concrete 1:4:8 outside the building including cast iron grating in the sink, connecting glazed stoneware pipe, brick masonry chamber with cast iron lid and cast iron grating for the gully trap. Spec. No. Bd.V.38 Page No.572. S.S.R. Item No.42.02age No.293

Providing and fixing 15 mm dia screw down bib/ stop tap of brass including necessary socket union nut complete (conforming to IS:781).Spec. No. Bd.V.8 Page No.554. S.S.R. Item No.41.40 Page No.288 Ground Floor

First Floor

Second Floor

Providing and fixing screw down for 25 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete. Bd.V.9 Page No. 555 S.S.R. Item No.41.45 Page No.288 Ground Floor

First Floor

Second Floor

Providing and fixing H.D.P container Syntex or alike one piece moulded water tank made out of low density polythyler and built corrugation including of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow of all tanks capacity above 1000 to 20,000 litres .As directed by engineer-incharge. S.S.R. Item No.42.54 Page No.300

Providing and fixing white glazed earthenware Wash Hand Basin of 55cm. x 40 cm. size including cold water pillar tap/cold and hot water pillar tap brackets, rubber plugs and brass chain, stop tap and necessary pipe connections including P.V.C. waste pipe and trap up to the outside face of the wall. Making good the damaged surface, testing etc. complete..Spec.No. Bd.V. 30 Page no. 565 S.S.R. Item No.41.63 Page No.290 Ground Floor

First Floor

Second Floor

Providing and fixing coloured glazed earthenware lipped flat back/corner type urinal with PVC 5 liters flushing cistern with fittings,capacity with fittings, inlet pipe and stop tap, brackets for fixing the cistern, P.V.C. flush pipe with fittings including lead soil pipe, lead trap and soil pipe connection up to the outside face of the wall. Bd.V.27 Page No. 564 S.S.R. Item No.41.61 Page No.290 Ground Floor

First Floor

Second Floor

Providing and fixing 75 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete Spec. No. As directed by Engineer in charge S.S.R. Item No.42.51 Page No.299 Ground Floor

Providing and fixing 100 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete. Spec. No. As directed by Engineer in charge S.S.R. Item No.41.52 Page No.299 Ground Floor

Providing and fixing P.V.C. Rain water pipes of 110mm outer diameter and having wall thickness of 2.2 to 2.7 mm confirming to I.S. 13592-1992 including proper rainwater receiving recess with P.V.C. plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25mm to 40mm from face of wall a fixing with clips of approved quality and number ,filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on C.C. or masonry blocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the P.V.C. fittings and additional 2 piece socket clips shall be got approved from engineer in charge etc. complete. (The contractor shall give 3 yrs guarantee bond for payment) S.S.R. Item No.42.87 Page No.304

Providing and laying in trenches 50 mm dia. heavy grade having embossed as ISI Mark galvanised iron pipes of 6.33 kg/metre necessary fitting remaking good the demolished portion with filling trenches and with primer of anti-corrosive oil paint , 2 coats complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. Bd.V.5 Page No.551 S.S.R. Item No.43.14 Page No.307

Providing and laying in trenches25 mm dia. heavy grade having embossed as ISI Mark galvanised iron pipes of 6.33 kg/metre necessary fitting remaking good the demolished portion with filling trenches and with primer of anti-corrosive oilpaint , 2 coats complete. Including removing existing pipe lineif necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. Bd.V.5 Page No.551 S.S.R. Item No.43.11 Page No.306

Providing and fixing 15mm diameter water meter with nonreturn valve including strainer, sockets/ union nut including water meter box making locking arrangement and lock. [Without chamber]. Bd.V.7 Page No.554 S.S.R. Item No.41.26 Page No.287

Providing and fixing 25mm diameter water meter with nonreturn valve including strainer, sockets/ union nut and including water meter box making locking arrangement and lock.[Without chamber Bd.V.7 Page No.554 S.S.R. Item No.41.28 Page No.287

Providing and fixing stealth faucet jet spray of approved Jaguar or equivalent make including necessary socket/union etc. complete as directed. (As directed by Engineer in Charge) Aurangabad D.S.R. Item No.772Page No.215

Providing and fixing chromium plated towel rod 16 mm dia and 75 cm. in length including all accessories complete. As directed by Engineer in charge S.S.R. Item No.42.31 Page No.296

Providing and fixing Aluminum / Chromium Plated wall peg 45cm long with 4 No.s hooks fixed on wall etc. complete. As directed by Engineer in charge D.S.R. Item No.573 Page No.129

Providing and fixing in position unplasticized polyvinyl chloride (UPVC) ultra voilet stabilized 110mm outer diameter cowl dome confirming to IS 4985 including making joint with solvent cement etc. complete. As directed by Engineer in charge S.S.R. Item No.43.25 Page No.309

Providing and fixing dressed bathing stone 45cm.x 45cm.x15cm. on cement mortar 1:6 etc. complete. As directed by Engineer in charge D.S.R. Item No.576 Page No.129

Providing and fixing C.P. wall mixer with provision for overhead shower with 115mm long bend pipe & wall flange jacquar make continential(CAT.NOCON-273) or equivalent including necessary sockets/union nut etc.completed As directed by Engineer in charge S.S.R. Item No.42.81Page No.302

Providing and fixing in position, Double shuttered aluminium extruded powder coated openable door of specified size with aluminium door frame of powder coated section 101.60 x 44.75mm , 3.18 mm thick and shutter comprising of powder coated section having bottom and lock rail of size 150 mm x 44.5 mm x 3.00 mm thick top rails 47.62 x 44.45 mm x 3.0mm thick , vertical style 47.62 x 44.45 mm, 3.00 mm thick and for shutter plain glass panes 5 mm thick for top panels and 12mm thick both side laminated phenol bonded particle board panels for bottom panels etc. , I.S.I. mark , heavy duty, Hydrauli floor spring of 150 kg capacity , having heavy duty concealed lock, necessary beading, glazing clips, PVC gaskets, 250mm length aluminium tower bolts, 150mm dia. pad handle, etc. as per detailed design and drawing or as directed by engineer in charge including all materials , labours, and equipment etc.complete As directed by Engineer in charge S.S.R. Item No39.63 Page No.275

Providing and fixing in position aluminium composite panels 4 mm thick and required size of building made out cladding for walls of approved colour and shade on structural frame work 65x65x6 mm thick aluminium frame work including fixtures of SS srews,nuts, bolts and scaffolding, ms angle cleat support to frame work etc. complete as directed by Engineer in Charge. AURANGABAD D.S.R. Item No.803 Page No.222/223

Removing Manglore tiled roof and ridge tiles with battens, ridge and barge boards, eaves 8 A boards etc and sacking the materials as directed with all leads and lifts complete. Including removing wood work below etc. complete. S.S.R. Item No.46.43Page No.318

Removing G.I. or A.C. sheet roofing including purlins, rincipal rafters etc. including sorting serviceable and unserviceable materials, stacking the same as and where directed in the compound including scaffolding etc. complete. S.S.R. Item No.38.26 Page No.251

Removing other type truss below 5 metres span from roof and stacking the materials as directed with all leads and lifts etc.complets Bd.W.8 5C Page No.587. S.S.R. Item No.46.05 Page No.315

Dismantling brick masonry in lime or cement mortar and stacking the materials as directed with all leads, lifts, complete.. As directed by Engineer in charge. S.S.R. Item No.46.09 Page No.315

Removing lime or lean cement concrete including stacking the spoils as directed with all leads, lifts, complete. As directed by Engineer in charge. S.S.R. Item No.46.12 Page No.315

Removing rich mix cement concrete including stacking the spoils as directed with all leads, lifts, complete. As directed by Engineer in charge. S.S.R. Item No.46.13 Page No.315

Removing doors and windows with frames and stacking the materials as directed with all leads, lifts, complete.As directed by Engineer in charge. S.S.R. Item No.46.15 Page No.315

Removing Shahabad or Tandur stones /Cement tiles/ Marble mosaic tiles from floor without bed concrete including stacking the materials as directed with all leads, lifts, complete. As directed by Engineer in charge. S.S.R. Item No.46.20 Page No.316

Removing cement or lime plaster including raking out of joints disposing of the spoils as directed with all leads, lifts, complete. As directed by Engineer in charge. S.S.R. Item No.46.22 Page No.316

Dismantling the R.C.C. work 1:2:4 and sorting out the materials such as steel etc. as directed and stacking them within the specified lead as directed. As directed by Engineer in charge. S.S.R. Item No.46.29 Page No.139

Disposing of dismantling material of reinforced cement concrete stone / brick masonry from work site to 50m beyond the building area.New Items : Note : The following all new items may be used on experimental basis for one year only) D.S.R. Item No.652 Page No.140

Royalty charges for sand, murum, Rubble required for the work As per Statement

Road ,compound wall,landscaping Excavation for foundation in earth, soils of all types sand, gravel and soft murum including removing the excavated material upto a distance of 50 m. beyond the building area and all lifts stacking and spreading as directed, dewatering, shoring, strutting and preparing the bed for the foundation and necessary back filling, ramming, watering (Including shoring and strutting) etc. complete. (Lift Upto 1.50Metre) Spec No. Bd. A .1 Page No. 259 S.S.R. Item No.21.02 Page.No.150

Excavation for foundation in hard murum including removing the excavated materials upto distance of 50 meters beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.50 m). Spec No. Bd. A .2 Page No. 259 S.S.R. Item No.21.06Page.No.150

Filling in plinth and floors with approved excavated materials in 15 cm to 20 cm layers including watering and compaction complete. [Spec.No. :Bd.A.10 Page No.262 ] S.S.R. Item No.21.36 Page.No.154

Filling in plinth and floors with contractors soil sand or murum in 15 cm to 20cm. layers including watering and compaction complete. Spec No. Bd.A.11 Page No. 263 S.S.R. Item No.21.37 Page.No.154

Providing soling using 80 mm size trap metal in 15 cm.layer including filling voids with sand/ grit ramming, watering complete. Spec No. As directed by Engineer in charge. S.S.R. Item No.21.40 Page.No.154

Providing and laying Cast in situ/Ready Mix cement concrete inM-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, laying/pumping,compacting, roughening them if special finish is to be provided,finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversibleDrum Type mixer/concrete Batch mix plant (Pan mixer) etc.complete. With natural sand/V.S.I. quality Artificial Sand Bd. E. 1 Page No. 287 S.S.R. Item No.24.01 Page.No.177

Providing and laying in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand Bd.F.3 Page No. 298 and B.7,Page No.38 S.S.R. Item No.25.11 Page.No.182

Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand Bd.F.5 Page No. 300 and B.7,Page.No. 38 S.S.R. Item No.25.31 Page.No.185 Ground Floor

Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor basedPLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand Bd.F.6 Page No. 300 and B.7,Page No.38 S.S.R. Item No.25.5 Page.No.188 Ground Floor

Providing and fixing in position T.M.T. bar reinforcement of various diameters for reinforced cement concrete pile caps, footings, foundation, slabs, beams, columns, canopies, stair case, newels, chajja, lintels, pardi, copings, fins, arhes etc. as per detailed designs, drawings and schedules including cutting bending, hooking the bars, binding with wires or tack welding and supporting as required complete. Spec No. : Bd.F.17 Page No.306. S.S.R. Item No.26.33 Page No.199 Ground Floor

Providing fly ash brick masonry with conventional / I.S. type fly ash bricks in C.M. 1:6 in foundation and plinth including bailing out water manually striking joints, racking out joints watering and scaffolding etc. complete. S.S.R. Item No27.12 Page No.213 Ground Floor

Providing fly ash brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete S.S.R. Item No.27.13 Page No.213 Ground Floor

Providing sand faced plaster externally in cement mortar using Kharsalia/Kasaba or similar type of sand, in all positions including base coat of 15mm thick in C.M. 1:4 using waterproofing compound at 1kg.per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8mm thick in C.M. 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc. complete. Bd.L.7 Page No.367. S.S.R. Item No.32.11 Page No. 224 Ground Floor

Providing and applying two coats of exterior acraylic emulsion paint confirming to corresponding I.S. of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface, applying primer coat ,scaffolding if necessary , and watering the surface for two days etc complete.As directed by Engineer in charge S.S.R. Item No.35.25 Page No. 242 Ground Floor

Providing and fixing Stainless Steel railing of 304 grade 50 with top and vertical pipe of 50mm dia at 0.90 m c/c or as required and horizontal pipes of 25mm dia in two rows, all pipes of 2 m thick including buffing,fabriating,welding, fixture,erecting,paint and two coats of oil painting with approved colour and polished the sill,hand rail and the newel post with french polish S.S.R. Item No. 40.07 Page. No.282 Ground Floor

Providing and laying in situ cement concrete M -30 with tremix treatment for 200 mm thickness for Concrete Road is including laying plastic sheet for 125 micron thickness with groove cutting of 4 mm wide and 20 mm deep with necessary refilling with bitumen ( excluding reinforcement) with Natural sand etc.complete MORTH 602 S.S.R. Item No. 5.22 Page. No.45 Ground Floor

Providing and fixing mild steel grill work for Door/ windows, ventilators etc. 20kg/SQ.M. as per drawing including fixtures, necessary welding and painting with one coat of anticorrosive paint and two coats of oil painting complete. Bd.U.1 Page No.537. S.S.R. Item No. 40.01 Page. No.281 Ground Floor

GARDEN Preparing instant Lawn:- Excavating the ground to a required depth of 20cms,removing & conveying unwanted stuff to arequired distance as directed. Filling fresh garden soil/silt &manure in excavated area in 3:1 proportion to a height of20cms. Mixing garden soil and manure thoroughly well,levelling, watering on previous night. Planting required varietyof lawn grass as directed and maintaining till well established by watering, weeding, clipping, rolling, etc. complete D.S.R. Sr. No. 3, Page No.225

Preparing flower Bed:- Excavating the ground to the required depth of 30cms, Removing and conveying unwanted stuff to a required distance as directed,Filling fresh garden soil & manure in excavated area in 3:1 proportion to a required height of 30cms Mixing garden soil and manure thoroughly well, levelling, watering,on previous night. Planting seedlings of required annuals 25cms, apart Maintaining till well established by watering, weeding, Stirring replacing of casualties etc, Complete D.S.R. Sr. No. 6, Page No.226

Rose Plant :- Excavating pit with size 0.3 x 0.3 x 0.3 m. removing and conveying unwanted stuff to a required distance as directed. Filling the pit with fresh garden soil and manure in 3:1 proportion to a height of 0.3m.mixing the soil & manure thoroughly well, levelling watering on previous night. Planting 40 to 50 cms. height healthy plant of required rose variety. Maintaining till well established watering, weeding, stirring, prunning, replacing the casualties etc, complete. D.S.R. Sr. No. 9, Page No 227

Mogra Plant /Creepers/Climbers:- Excavating pit with size 0.3m x 0.3m x 0.3m,removing and conveying unwanted stuff to a required distance as directed. Filling the pit with approved excavated material upto a height of 0.15 mtr. and remaining height of 0.15mtr.with fresh garden soil and manure in 3:1 proportion. Mixing soil and manure thoroughly well levelling, watering, on previous night. Planting one or two year old healthy plant as per specifications. Maintaining till well established by watering, weeding, prunning, stirring, replacing casualties, etc, complete D.S.R. Sr. No. 10, Page No.227

Planting large flowering/ Shady trees ( Ht.1 mtr) Digging pit with size 0.9 x 0.9 x 0.9m, removing & conveying unwanted stuff to a required distance as directed . Filling thepit with approved excavated material upto a ht .30 mtr. and remaining ht. .60 mtr. with fresh garden soil manure in 3:1 prop. mixing soil & manual throughly well leveling, s directed, watering previous night planting 1 to 2 year old min. 1 mtr ht. healthy trees sapling as per specifications. Maintaining till well established by watering, weeding, stiming of soil replacing of casulaties etc. complete. D.S.R. Sr. No. 11, Page No.228

Planting large flowering/ Shady trees ( Ht.2 mtr) Digging pit with size 0.9 x 0.9 x 0.9m, removing & conveying unwanted stuff to a required distance as directed. Filling the pit with appvoed excavated material upto a ht. of 0.30m. and remaining ht. of 0.60m. with fresh garden soil & manure in 3:1 proportion. Mixing soil & manure throughly well, leveling as directed, watering previous night, planting two to three year old min. 2.0 mtr. ht., healthy trees sapling as per specifications, Maintaining till well establighed by watering, weeding, stiring of soil replacing of casulaties etc. complete. D.S.R. Sr. No. 12, Page No.228

Planting small & medium Size Ornamental/ Flowering Plant:-Digging pit with size 0.9 x 0.9 x 0.9m, removing & conveying unwanted stuff to a required distance as directed Filling the pit with fresh gardin soil & Farm Yard Manure upto a ht. of .060 m. in 3:1 proportion, Mixing soil & Manure throughly well, leveling, watering on previous night, Planting one to two year old healthy plant saplings as per sep. Maintaining till well establshed by watering, stiming, of soil and manure, replacing casulaties etc. complete. D.S.R. Sr. No. 13, Page No.228

Preparing Edge or Border :-Excavating the ground to a required depth of 20 cms in the required area removing & conveying unwantedb stuff, rabbis to the required distanceas directed. Filling the excavated part with fresh soil and manure in 3:1 propration to a required ht. to 20 cm. mixing, leveling, watering the same. Planting rooted edging/border plants at distance 20 cms. Apart watering, weeding , stirring of soil, replacing casulaties, purning if necessary etc complete. D.S.R. Sr. No. 4, Page No.226

Planting Clipped Hege:- Excavating the gound to a required depth of 30 cm. removing and conveying unwanted stuff to required distance as directed. Filling fressh garden soil & manure in Excavated area in 1:3 Prop to a ht. of 30cm. Mixing garden soil & manure throughly the well, levelling, watering previous night. planting hedge plant of required species in two Rows & Between two rows & between Two Cutting will be 25 cm Maintining till well Established by watering weeding , stirring of soil, replacing casulaties, purning if necessary etc complete. D.S.R. Sr. No. 5, Page No.226

Preoaring Canna Bed:- Excavating the gound to a required depth of 30 cm. removing and conveying unwanted stuff to required distance as directed. Filling fressh garden soil & manure in Excavated area in 1:3 Prop to a ht. of 40cm. Mixing garden soil & manure throughly the well, levelling, watering previous night. planting hedge plant of required species in two Rows & Between two rows & between Two Cutting will be 25 cm Maintining till well Established by watering weeding , stirring of soil, replacing casulaties, purning if necessary etc complete. D.S.R. Sr. No. 7, Page No.226

Royalty charges for sand, murum, Rubble required for the work As per Statement

Interiors, Wall Cladding Etc ARM STRONG CELING Providing and fixing False ceiling of 15 mm thick Accoustic Armstrong boards of approved make, shape and sizes as per drawings including GI perimeter channel , GI ceiling section , Necessary clips , dry wall screw required including framing boarding & all transportation scaffolding & all necessary labour, material & machinery etc. complete. Spec. No. As directed by Engineer in charge./Architect. Aurangabad D.S.R.Item No.444 page no.133

GYPSUM CEILING Providing and fixing suspended false ceiling of 12.5 mm thick gypsum board with galvanized iron perimeter channel, intermediate channel, galvanized iron hanger ceiling section, necessary clips dry wall screw required including framing, boarding, jointing, finishing, filling joints, drilling holes, including two coats of primer and all transportation, scaffolding and all necessary labour material As directed by Engineer in charge./Architect.

Wall Panelling Providing and fixing frame with / without ventilator of size as specified with Country cut teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm with oil painting, etc. complete As directed by Engineer in charge./Architect. S.S.R. Item No.39.01 Page No.259

Providing & fixing at site rockwool 50mm th., 48kg density, 1.0mx0.50m size bonded slab. To be fixed between wooden frames.(brand SIPLA, rockwool india) the cost shall include all materials, labor etc. complete.As directed by Engineer in charge./Architect.

Providing and fixing sound absorptive wall panelling with acostical perforated tiles of armstrong or equivalent brand. As directed by Engineer in charge./Architect.

Providing and fixing sound absorptive wall panelling in profile with 150mm x12mm ply panel on wall (the panel should be levelled) grid size 600mm x 600mm c/c vertically and horizontally fixing the same with 22swg x 12x 12.5mm GI chiken As directed by Engineer in charge./Architect.

Providing & Fixing Laser cut MDF Decorative jali with including Fixture & Fastening etc Complete. As directed by Engineer in charge./Architect.

Providing and fixing wall panelling in profile with 25x25mm sal wood section with grid size 600 x 600mm c/c vertically and horizontally fixing the same with 12mm commercial ply of approved make and finished with 1mm laminate of approved shade and make. As directed by Engineer in charge./Architect.

Providing and fixing decorative teak plywood vaneer lining 4mm thick with backing of country teak wood frame work of battens 12mm x 25mm at 30cm centre to centre fixed to walls and pillars without skirting and cornice as per drawings including necessary iron work andfinishing the exposed wood work with french polish complete.Bd.Q.18 Page No.431. D.S.R.Item No.255 page no.65 As directed by Engineer in charge./Architect.

Providing and fixing teak wood/rubber wood skirting wherever required as per profile of size 75x15mm duly meamine polished fixing details as per drawing and As directed by Engineer in charge./Architect. .

STAGE FLOORING Resilient wooden stage flooring Providing and fixing 150 MM Thk. resilient wooden stage flooring consisting top layer of 25 mm thk. teakwood Planking with Tongue and Groove joints, withunder-layer of particle board fixed on T. W. frame work, providing Rubber padsbelow main runners for resilience effect and laying glass wool mattressesbetween runners for absorption of cavity resonating sound.The top layer of Teakwood planks shall be of size 94 mm (w) x 25 mm (thk.)superior grade knot-free Seasoned Teak wood planking with Tongue andGroove joints in both directions, planks fixed with adhesive and blind nails on under-layer of 18 mm thk. exterior grade phenol bonded particle board, fixed onsuperior grade T.W. framework below; consisting main runners of size 63 mm x97 mm placed at 450 mm c/c in one direction only, at right angle to theproscenium line: cross T.W. battens of size 50 x 50 mm fixed to main runnersat right angle to main runners at 600 mm c/c, extra runners to be provided atperimeter, border edges of wooden flooring, Mike / Speaker Terminal boxes etcMain T.W. runners to be placed on 10 mm thk. Neoprene Rubber cushion pads of size 150 x 100 mm, placed at 750 mm c/c under runners, this assembly tobe arranged properly to form accurate level of wooden flooring of 0.05%accuracy within longest length of flooring and matching in level withsurrounding concrete flooring. Acoustical Mattresses made of 50 mm thk. resin bonded glass wool of density32 KG/Cu. Mtr. fully covered in bags of 3 mil thk. 80 GSM fibreglass cloth andmattresses to be laid on concrete flooring between runnersAll the wood work and particle boards to be treated on all sides and edges withapproved make of anti-termite wood preservative, followed by one coat ofvarnish; top surface of T.W. planking to be provided with primer, followed by 2coats of French polish, work inclusive of providing cut-outs with removable /hinged TW covers for terminal boxes of mikes / loudspeakers etc. complete as per drawings, detailed specifications, instructions and to the approval of consultant / site As directed by Engineer in charge./Architect.

PAINTING WORK Painting plastered surface/Acoustical tils / AC sheets in ceilling panelling and parition etc. with two coats of ICI dulux satin finish paint or equivalent of approved shade and make over one coat of approval cment primer including prepration of surface. As directed by Engineer in charge./Architect.

Stage Curtains Providing and fixing horizontally operative Main velvet curtain in two sections, with overlaps of 0.6 mtr (W) at centre and at both the sides, each finished section of approximate size of 7.7 mtr (W) X 5.6 mtr (H) including overlaps, stitched using velvet cloth and back lining cloth of approved make, quality and colour, stitched using cloth 1.75 times the width of finished width, gathered and folded in plates to form velour’s and finished to required finished dimensions, the top edge of curtain reinforced using 38 mm (W) Navar tape and hooks provided at every 0.3 mtrs. 2 Nos. of golden satin silk cloth borders of 75 mm (W) and 100 mm (W) stitched on lower front part of curtain for décor as per instructions, complete as per drawings/instructions and to the approval of As directed by Engineer in charge./Architect.

Providing and fixing flat type (i. e .without plates) back curtain using cotton drill/Tapestry cloth of approved make colour and quality, of approximate size of 13.0 m (W) x 5.6 m (H), with 38 mm (W) Navar tape reinforcement a the top edge, cotton Ribbons of 300 mm length at every 0.45m fixed to the top edge and bottom edge, 1 no. class 'A' G I Pipe of light grade and light weight (for non hydraulic use) having O.D about 45 to 50 mm fixed to the bottom edge of the curtain with Ribbons; the top edge of the curtain to be fixed with ribbons to already existing G. I. Pipe (which is provided in the item of drapery mechanism); work to be done as per drawings/instructions and to the approval of consultantsAs directed by Engineer in charge./Architect.

Providing and fixing flat type (i.e. without plates) Cyclorama Screen stitched using mercerized fine cotton poplin white cloth of approved make and quality, of approximate size of 11 mtr (W) X 5.0 mtr. (H), with 38 mm (W) Navar tape reinforcement at the top edge and cotton ribbons of 300 mm length at every 0.45 mtr., fixed to the top edge and bottom edge, 1 No. class ‘A’ G I pipes of light grade and light weight having approximate O.D. about 45 to 50 mm fixed to the bottom edge of the screen with ribbons. the top edge of the curtain to be fixed with ribbons to already existing G. I. Pipe (which is provided in the item of drapery mechanism); The work to be completed as per drawings/directions byAs directed by Engineer in charge./Architect.

Providing and fixing Frills (zalars) made of cotton drill/tapestry cloth of approved make, quality and colour, stitched using 2 times width of cloth folded to form plates (Velour’s) and finished to required width. The top edge of frill reinforced using 38 mm (W) Navar tape, and stitching 300 mm long cotton ribbons (of same colour) at 0.45 mtr C/C etc. complete as per drawings and directions of consultant/as per approximate finished dimensions as under: 3 No. frills - each 14 mtr(W) X 1.5 mtr (H). 2 No. frills - each14.0 mtr.(W) X 1.8 As directed by Engineer in charge./Architect.

Providing and fixing Front Decorative Frill (Zalar); (to be fixed ahead of Velvet Curtain) made of golden satin silk cloth of approved make and colour, stitching using 2 times width of cloth to form plates (Velour’s) all other details same as in cotton frills in item 3 above, complete as per drawing and directions of consultant/ approximate finished dimensions as under: 1 No. frill X 15.0 Mtr (W) X 0.8 Mtr (H). As directed by Engineer in charge./Architect.

Providing & fixing Sets of Side Wings as per dimensions given further, made of Deodar wooden frame using strips of 100 (W) x 25 mm (Thick), with minimum 3 Nos. intermediate cross supports, with necessary bracings at corner and at intermediate supports as required, suitable metal rollers 2 Nos. per frame at bottom edge, Cotton Drill/Tapestry cloth fitted on one side of the frame. The wooden frame shall be painted by same colour that of cloth colour to match the frame with cloth in colour etc. complete as per drawings and directions of consultants / Engineer in charge; as per approximate dimensions as under: A) 20 No. Panels of approximate size of 1.37 mtr. (W) X 5.0 Mtr (H). Each. B) 4 Nos. swinging panels (Tormetors) of approx. size 0.8 mtr (W) X 4.75 mtr (H) Each. [swinging panels to be fixed to 4 panels of A) with detachable hinges and a roller at bottom edge]. As directed by Engineer in charge./Architect.

Providing and fixing Dual Sliding Guides for sliding wings each guide having 3 Nos. wooden strips of 0.2 mtr. (H) and 0.15 width, with various running lengths between 2.0 R/Mtr. To 2.8 R/Mtr. as required at site. Total 10 Nos. dual guides .As directed by Engineer in charge./Architect.

Auditorium Chair Proviing & Fixing Auditorium chairs As per followings specification A Push Back Seat has a simultaneous movement of seat and Back, with an Auto Stop at all places. It has Lateral movement of the back and an inclined movement of the seat. TECHNICAL SPECIFICATIONS Back 15mm bent plywood of size 470 x 130 x640 to 770 mm height (as required by th customer). Seat 19 mm plywood seat, size 480 x 490 x19 mm. Push Back A metal sheet mechanism duly embossed of size 450 x 440 x 1.6 mm. Block to be 2 triangular blocks duly embossed - 300 x 300 mm with 4 of 9mm holes. Longitudinal tubes of size 40 x 20 x 490 mm - with 2 tubes each and 4 longitudinal tubes of size 20 x 6 mm duly bent in shape to shape Riveted / Welded & approximately 350 mm long. Seat Back Bracket Interconnected / Riveted / Welded and Back Bracket to be 200 x 60 x 1.6 mm. Seat Bracket to have stopper cup with 5 rivets and approximately 170 x 340 x 1.5 mm - 2 pairs for Seat / Back. All rivets to be with nylon washers and pneumatic machine only. Rollers to withstand temperatures up to 200° and of sizes - 22 mm width & 38 mm Dia, duly riveted and welded supported by metal sheet of size 30 mm x 120 mm - 1 pair. All stopper material to be reinforced by nylon tubes of size 30 mm. Metal stand to be 300 x 300 x 3 mm duly bent in 1piece supported by 3 structures 20 x 40 x 270 mm each. Side Panels All side panels to be of 12 mm plywood covered with fabric and fused with foam, side panel to cover all metal parts. FABRIC Fabric 100% polyester to be fused with 5 mm / 7.5 mm foam, wherever quilting is required. Aisle Light Aluminium Box of size 125 x 100mm anodized with slit to slide plate, having row and chair numbering with LED in various colours and plate to be anodized silver. ARM REST- OPTIONS Wooden Handles To be of size 425 x 25 x 55 / 70 mm depending on the ctc of the chair. PEN-WORKERS MAKE Spec.No.: .As directed by Engineer in charge./Architect.

Visitors Bench Providing and fixing visitor bench of Specifiation Total Length: 1775mm Total height 1045 mm total depth 550mm and seat height 556mm steel perforated seat and back rest on tublar structure chrome plated handles & Base all steel components shuold be epxo powder coated after seven. As directed by Engineer in charge./Architect.

VIP Sofa Providing and fixing vip sofa 600x600mm seat size back 500-600 mm high:of standared ht. with internal frame made up of 19mm board with 120mm high density foam with 12mm th. U foam of approved make & with 50mm th. Rubberized belts with tapestry of approved colour. As directed by Engineer in charge./Architect. Single seater As directed by Engineer in charge./Architect.

Double seater As directed by Engineer in charge./Architect.

S AND J BUILDCON PRIVATE LIMITED