Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹32.3 LAccepted-AOC H NO 164 WARD NO 6 KARAN NAGAR UDHAMPUR 182101 J K | UDHAMPUR | UDHAMPUR | JAMMU AND KASHMIR | 182101 | L1 | Accepted-AOC BEING LOWEST BIDDER | |
| 2 | L2₹36.5 L+₹3.3 L (9.99%)Rejected-Finance C 49 B RADHA GARDEN MEERUT 250001 UP | MEERUT | MEERUT | UTTAR PRADESH | 250001 | L2 | Rejected-Finance Being other than L1 bidder | |
| 3 | L3₹38.6 L+₹5.4 L (16.4%)Rejected-Finance MURSTEY COLONY PLOT NO 16 LEH 194101 LADAKH | LEH LADAKH | LADAKH | 194101 | L3 | Rejected-Finance Being other than L1 bidder | |
| 4 | L4₹39.1 L+₹5.9 L (17.9%)Rejected-Finance | L4 | Rejected-Finance Being other than L1 bidder |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
17 May 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 865 EWS
GE 865 EWS, PIN-913 865 C/o 56 APO
REPAIR AND MAINTENANCE OF EM INSTALLATION AT SECTOR A AND B UNDER AGE BR II OF GE 865 EWS
2023_MES_590553_1
865/EWS(NIT-58)/2023-24
Open Tender
Civil Works
Item Rate
270 days
GE 865 EWS
As per tender documents and as per policy in vogue
9 documents required · 9 mandatory
₹500
GE 865 EWS
₹90,000
Yes
14 Sept 2023
21 Apr 2023
24 May 2023
21 Apr 2023
17 May 2023
4 May 2023
Amount
Taking down chowkhat or frames exc 1.50 Sqm n.exc 4 Sqm (without taking down shutters from the frames complete all as specified and directed.
All as per Srl Item No 1 here-in-above but n.exc 1.50 Sqm
Taking down shutter of any description exc 1.0 0 sqm but n exc 2.00 sqm complete all as specified and directed.
Refixing shutters of any description exc 1.00 Sqm and n.exc 2.00 Sqm each in same opening, complete all as specified and directed by Engr-in-charge.
S&F IInd class soft wood as in plian solid straight chowkhats wrought framed rebated on the solid put together on with glue pinned at joints complete all as specified and directed.
S & F 35mm thick 2nd class hardwood, plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and directed.
M&L for 30mm thick IInd class hard wood glazed and skelton shutters as in windows open rebated and prepared to receive glass gauge etc,divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, fitted with cut and mitered beads for securing glass gauge etc :sizes of members of shutters as spfd in SSR Part I ,section 8 , clause 8.24(b) complete all as specified and directed.
S&F only 150mm long aluminium anodised barrel tower bolt of extruded section in old or new position complete all as specified and directed.
S&F only 100mm long aluminium anodised barrel tower bolt of extruded section in old or new position complete all as specified and directed.
S&F aluminum door handle cast type 150 mm in old or new position complete all as specified and directed.
S&F aluminum door handle cast type 100 mm in old or new position complete all as specified and directed.
S&F 250 mm long aluminum door sliding door bolt incl all necessary fitting and bolts complete all as specified and directed.
S&F 100mm long mild steel medium weight but hinges cold rolled complete all as specified and directed.
S&F MS butt hinges medium weight cold rolled 75 mm long complete all as specified and directed.
S&F 375mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate in repair, complete all as specified and directed.
Hacking out old broken glasses (Any thickness, size quality, description) from wooden or steel frames fixed with putty or wooden beads complete all as specified and directed.
S&F 4.8 mm thick sheet glass ordinary quality in any position and glazing with oil putty, glazing clips /beading as per site requirement n'exc 0.5 sq.m in each pane complete all as specified and directed.
S&F 3mm thick glass sheet oridinary qlty in steel or wooden frames complete with fixing materials such as putty glazing pins wooden beads etc complete all as specified and directed.
S&F anodised aluminium frames for door, windows, ventilators with one or more rebates including joining cleat for fixinf etc complete all as specified.
S&F anodised aluminium door shutters, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, anodised aluminium snap beading screws etc. complete all as specified
S&F anodised aluminium window and ventilator shutters, side hung type without sash,aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading screws, anodised aluminium fittings such as peg stays 150mm long (1 Nos) hinges type B-21 100mm long (2 Nos) suitable handle (1 Nos) etc. complete all as specified
M&L for two coats of synthetic enamelled paint on new decorated wooden surfaces including preperation complete all as specified and directed.
S&F in repair aluminum door closer ( aluminum extruded section) hydraullically regulated , designation No 3 , universal type , suitable for door shutters of 851mm to 1000 in width and of weight 61 to 80 kg complete all as specified and directed.
S&F Harrison rails, anodised aluminium alloy, with fixing brackets, stops, rollers in repair etc.complete all as specified and directed.
Dismantling wall and ceiling boards (Fiber, pulp, insulation, blankets) any thickness including covered fillets and supporting members complete all as specified and directed.
Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed.
Dismantling timber scantling over 40 sqcm in section in any position.(Frame section) complete all as specified and directed.
M&L for 2nd class soft wood clean sawn as in scantling fixed with nails complete all as specified and directed.
Dismantling timber scantling under 40 sqcm in section in any position.(Frames section) complete all as specified and directed.
M&L for 2nd class softwood clean sawn as in scantling fixed with nails exceeding 13 Sqcm and n.exc 25 Sqcm in section complete all as specified and directed.
M&L for 9mm thick prelaminated particle board interior grade , prelaminated one side with decorated choice lamination and other side balancing white fixed with screws/nails to timber frame work as in wall pannelling, complete all as specified and directed.
M&L for 6mm thick 5 no of ply wood BWR,type BB as in ceiling / boarding fixed with screws to timber frame work complete all as specified and directed.
Dismantling plain or corrugated steel sheeting any gauge thickness including nanital or similar pattern complete all as specified and directed.
S&F 0.63mm thick galvanised mild steel sheets with two corrugation side lap fixed with J or L hooks with grade of zinc coating 275 complete all as specified and directed.
All as per Srl item no 34 here-in-above but fixing only complete all as specified and directed.
S&F 0.63mm thick plain galvanised mild steel sheeting and in ridges hips, valley gutters etc conforming to class VIII complete all as specified and directed.
S &F Pre-painted galvanum aluminum zink coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550MPa as in roof covering /clading to walls fixed with self tapping screws complete all as specified and directed.
S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
Dismantling structural steel work any description any position, complete all as sfd and directed by Engr -in-charge
S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240 complete all as specified and directed.
S&F rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates, Fe 410, Gde E-250 complete all as specified and directed.
M&L for two coats of synthetic enamel paint on new galvanised corrugated sheets incl preparation of new zinc or galvanised surface to receive paint over a coat of red oxide and treatment with mordant solution complete all as specified and directed.
M&L for one coats of synthetic enamel paint on steel surfaces of old CGI sheeting roof complete all as specified and directed.
M&L for two coats of synthetic enamel paint on new steel surfaces including preparation over a coat of red oxide Zinc chrome primer complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified
M&L for 7mm thick non skid coloured ceramic tiles (area of each tile exc 0.06 and nexc 0.11sqm) etc set and jointed in neat cement slurry and pointed with white or coloured cement mixed with pigments including screed bed or bedding laying of cement mortar (1:6) 15 mm thick for as in floor finishes, complete all as specified and as directed.
M&L for Glazed ceramic coloured tiles in vertical surface 300x 200x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match (Note: Any disturbed surfaces shall be matched w/o any extra cost to the govt) incl 10mm thck screed bed below tile for dado/skirting CM 1:4 complete all as specified and directed.
Demolition cement concrete (unreinforced) of any descriptions, in ground floors not exc. 15 cm thick, above or below ground level, complete all as specified and directed.
M&L for 25 mm thick, plain cement concrete, 1:2:4 (Nominal Mix), type B-0 (using 12.5 mm graded crushed stone aggregates) as in floors finished rough surface to receive floor finishes, complete all as specified and directed by Engr-in-charge.
M&L 100 mm thick PCC 1:2:4 Type B1 (using 20mm graded stone aggregates) as in floors & hard standing, complete all as specified and as directed by the Engineer-in-Charge.
M&L for 75mm thick PCC 1:4:8 type D-2, using 40mm graded crushed stone aggregate as in sub base complete all as specified and directed.
M&L Forming Construction joint 30mm deep x 10mm wide filled with sealing compound, Grade `B', complete all as specified and as directed by Engr-in-Charge.
Material & Labour 75mm thick PCC 1:3:6 type C1 (using 20mm graded stone aggregate) as in plinth protection including making proper joints with bitumen mastic with sand as per specification at an interval of 3m complete all as specified and as directed.
Plain cement concrete 1:3:6 type C-1 (using 20mm graded crushed stone aggregate), as in , in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, benching, kneelers, apex stones, bed plates, kerbs not provided , water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed complete all as specified and directed.
Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed.
M&L, 20-25mm thick machine cut kota stone slab flooring over cement screed base 20mm thick in cement mortar 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.
M & L for Coloured Chequered cement concrete tiles, machine pressed, factory made of size 300mmx300mmx25mm thick, set, jointed and pointed in neat cement slurry, with grey cement and no pigment, laid in floors, over and including 20mm thick screed bed in cement mortar 1:6, complete all as specified and directed.
M&L for Machine pressed precast conctete interlocking Coloured/grey paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment, including sand cushioning under floors or in foundations including watering and consolidation, complete all as specified and directed.
M & L PCC 1:3:6 type C2 using 40mm graded aggregate in surface channels and drain, including demolition of cement concrete (unreinforced) of any description and in any position not other wise specifically provided for and removing debris outside the MD land complete all as specified and directed.
Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement incl forms, moulds, mitred/stopped ends etc complete all as specified and directed.
Excavating in post holes in hard/dense soil (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and raming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50m and making good surface complete all as specified and directed.
M&L PCC 1:4:8 Type D2 (using 40mm graded stone aggregate) as in foundaion, filling and mass concrete complete all as specified and directed.
S&F angle iron section with swain neck as in fencing posts struts including notching drilling holes for wire mesh etc and flat iron fillets for securing wire mesh etc including all necessary drilling, bolting or riveting and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.
Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long and dia of shank 5 to 10mm complete all as specified and directed.
S&F Mild steel Round bars 10mm dia and over,cut to length, bent to shape required,complete all as specified.
Preparing new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide/ zinc chrome paint complete all as specified and directed.
Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and directed.
Supply only chain link fencing MS galvaised fencing, any size or any type complete all as specified and directed.
S & F galvanised 2 strand steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossings with and provision of galvanised MS wire staple or steel pins etc as directed (each line wire to be measured.) in repairs complete all as specified and directed.
Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar complete all as specified and directed.
M/L Pre-cast cement concrete 1:3:6 type C1 (20mm graded stone aggregate) block masonry with solid blocks, exc 10cm in width and setting in cm 1:6 complete all as specified and directed.
All as per Srl Item No 71 here-in-above but except blocks
M & L for Walling of random rubble, uncoursed , built in CM 1:6 complete all as specified and directed.
All as per Srl Item No 73 here-in-above but except stone
Taking down cement plaster on brick or conc surfaces including racking out joints hacking for key, scrubbing down with water etc complete all as specified and directed.
M&L for 15mm thick rendering on other than fair faces of brick works finished even and smooth without using extra cement in cement mortar 1:4 complete all as specified and directed.
M&L for applying two coats of oil bound distemper on newly plastered surfaces of desired finish as app by Eng-in-charge
M&L for two coats cement base paint on newly plastered surfaces including preparation of surfaces complete all as specified and directed.
M/S Praveen Kumar and Sons
M/S SHAMSHER ALI SUFI
Rampal Singh Contractor
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .