SPECIAL REPAIRS TO BLDG NO P 65 AT 373 I SUPPLY PLATOON ASC, SPECIAL REPAIRS TO BLDG NO E 1 DAL SHED AT 373 I SUPPLY PLATOON ASC, PROVISION OF CHAIN LINK FENCING FOR BLDG NO 4 RA LINE AND 5 RA LINE, PROVN OF CHAIN LINK FENCING AT LAXMITEK AREA, PROVN

Amount

Dismantling single layer Mangalore pattern tiles in roofing and removing rubbish off the premises and old unserviceable tiles taken as credit complete all as specified and as directed.

Dismantling timber scantling 40 Sqcm and over in section, in any position for unframed work and removing rubbish off the premises and old unserviceable timber scantlings taken as credit complete. all as specified and as directed.

Material and labour for 2nd class hard wood timber scantling cleans sawn and fixed complete all as specified and as directed .

Description all as per item no :04 here in before but except timber

Material and labour for Preparation of new or old wooden surfaces of any description , width or girth and applying two coats of creosote oil complete all as specified and as directed.

Supply and fix in repairs Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. Note :Make of Galvalume sheet : TATA Blue Scope Ltd/JSW (Colouron)/LLOYD

Supply and fix in repairs Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in ridge , valley gutter fixed with self tapping screws complete all as specified and as directed. Note :Make of Galvalume sheet : TATA Blue Scope Ltd/JSW (Colouron)/LLOYD

Supply and fix Rolled mild steel roof trusses (framed), trussed, purlins, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. confiming to Fe 410 -W (Gde E- 250) quality A, complete all as specified and as directed.

Supply and fix Mild steel framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work of water tanks and similar work conforming to Fe-290 Gde- E-165 complete all as specified and as directed

Supply and fix Mild Steel work as in wind ties etc. for roof including securing bolts and cutting tops to shape as directed ,drilling holes ,notching for wire etc conforming to Fe-290 Gde- E-165 complete all as specified and as directed.

Material and labour for Providing cement concrete 1:3:6 type C1 (using 20 mm graded stone aggregate as in coping/bed plates ,eves filling in roof with rounded or chamfered edges ,finished surfaces fair and even including necessary form work complete all as specified and as directed.

Dismantling boarding of any description fixed in any position with nails and removing rubbish off the premises and old unserviceable board taken as credit completer. all as specified and as directed

Material and labour for Aluminium composit panel 3mm thick fixed over existing wooden /steel frames with necessary frame work with screwing and scaffolding including dismantling old unserviceable aluminium composit panel of any description and taken as credit complete all as specified and as directed.

Material and labour for Preparation of new steel surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of zinc chrome red oxide primer all as specified and as directed.

Taking down eaves gutter pipes, rain water pipes (of any size or pattern) including fittings, head shoes, bends, swan neck etc and taken as credit complete all as specified and as directed.

Supply and fix PVC (SWR) eaves gutter trapezoidal shape with connected accessories 150mm dia complete all as specified and as directed.Make :Finolex/Supreme

Supply and fix PVC (SWR) pipes 110mm dia, single socketed in any length fixed to walls & jointed with rubber ring joints including demolition and breaking up existing drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar and removal of debris not exceeding 100 meters complete all as specified and as directed Note:Make of PVC(SWR) Pipe :Finolex/Supreme

Supply and fix110 mm dia PVC (SWR) bends any radius with access door complete all as specified and as directed.Note:Make of PVC(SWR) fittings :Finolex/Supreme

Material and labour for Pre-cast cement concrete solid block masonary type C1, 1:3:6 (using 20 mm graded stone aggregate) exc 10 cm width and setting in CM 1:6 including demolition of pre cast concrete articles and precast concrete block walling of aqny description and removal of debris not exceeding 100 meters and serviceable items taken as credit complete all as specified and as directed .

Taking down cement plaster on brick or stone wall built in cement mortar etc . including racking out joints hacking for key scrubbing down with water etc.complete all as specified and as directed..

Material and labour for Rendering 15 mm thick in cement mortar 1:6 on fair faces of brick work or PCC block masonry or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for Rendering 5mm thick in cement mortar 1:4 mixed with water proofing compound over 10mm thick backing coat in cement mortar 1:6 on fair faces of brick work or PCC block masonry surfaces finished even and smooth without using extra cement complete all as specified and as directed. Note: Water proofing compound shall be measured and paid separately.

Supply only integral water proofing compound. Make :Impermo'Roff/Cico

Material and labour for Preparing newly plastered surfaces of walls and applying three coats of white wash complete all as specified and as directed

Material and Labour for Applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces etc complete all as specified and as directed

Material and labour for Preparing old plastered surfaces of walls ,pilasters ,cornices etc and applying two coats of white wash complete all as specified and as directed

Material and Labour for complete removal of existing treatment of old plastered/un plastered surfaces of wall and brooming down and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces etc complete all as specified and as directed

Demolition of cement concrete in ground floors n exc 15 cm thick unreinforced and removal of debris not exceeding 100 meters and serviceable items taken as credit complete all as specified and as directed .

Material and labour for Plain cement concrete type B1 1:2:4 (using 20 mm graded aggregate )25 mm thick in sub base of floor as levelling course including necessary steel form work complete all as specified and as directed..

Material and labour for Machine cut kota stone slab flooring 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over screed bed or bedding layer of mortar 15mm thick for laying of cuddpah slab in CM 1:6. complete all as specified and as directed.

Material and labour for Machine cut kota stone slab in riser of steps ,skirting, dado and pillar etc , 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over renderig in cement mortar1:4 10mm thick on other than fair faces of brick work or stone masonry surfaces as in backing coat of skirting/dado etc complete all as specified and as directed.

Material and labour for 100mm thick Plain cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in flooring ,finished even and smooth with using extra cement including necessary form work complete all as specified and as directed .

Material and labour for 50 mm thick Plain cement concrete 1:4:8 type D2 using 40 mm graded stone aggregate as in sub base / levelling course flooring including necessary form work complete all as specified and as directed .

Material and labour for Machine pressed precast concrete interlocking colour paver block of 80mm thick any shape and size with glossy finish on top confirming to IS 15658-2006 , with grey cement ,M-40 grade including dismantling of existing unserviceable tiles of any description and taken as credit complete all as specified and as directed.

Material and labour for 50 mm thick River Sand filling under floors or in foundations including spreading ,levelling , watering and consolidation complete all as specified and as directed. Note : Consolidated thickness shall be measured for payment

Material and labour for Plain cement concrete type C2 1:3:6 (using 40 mm graded aggregate )75 mm thick in plinth protection and finishing the cement concrete surface even and smooth without using extra cement including necessary steel form work complete all as specified and as directed.

Taking down chowkats with shutters n exc 1.50 sqm each (without taking off shutters from the frame) and taken as credit complete all as specified and asdirected.

Supply and fix Aluminium sliding windows /ventilators (Triple track), fabricated to required size with standard aluminium anodised sections, with bottom track of size 92 x 31.75 x 1.6mm, side and top frame of size 92 x 31.75 x 1.4mm, top and bottom shutter rail of size 39x17x1.4mm, outer style of size 39 x 17 x 1.4mm, interlock style of size 39 x 27 x 1.4mm, including provision of 4mm sheet frosted glass for panels including provision of all hardware fittings such as heavy duty handles, locking arrangements, rubber gaskets, rollers, spring catchers etc. complete all as specified and as directed . .Note : (i) Thickness of aluminium anodisation shall be of 15 microns . (ii) Make of aluminium anodised section : Jindal/Indal/Hindalco (iii) Make of frosted glass : Saint gobain/Modi guard/ Gold Fish

Supply and fix in repairs Stainless steel wire cloth. 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staples complete all as specified and as directed .

Hacking out old broken glass (any thickness/size, quality or description) from wooden frames, glazed with putty or fixed with beads and removal of debris off the premises complete all as specified and as directed.

Supply and fix 4 mm thick sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.5 sqm in each pane complete all as specified and as directed.Note : Make of glass : Saint gobain /Modi guard /Gold fish.

Supply and fix 4 mm thick sheet glass, ordinary quality and glazing with oil putty in squares exceeding 0.5 sqm in each pane complete all as specified and as directed.Note : Make of glass : Saint gobain /Modi guard /Gold fish

Dismantling asbestos cement (corrugated, semi corrugated, etc) sheets in roof coverings and removing rubbish off the premises and old unserviceable sheets taken as credit complete all as specified and as directed.

Material and labour for Preparation of newly plastered surfaces of wall and applying two coats exterior emulsion paint ( Make :Apex ultima - Asian paint) over coat of water based primercomplete all as specified and as directed.

Material and Labour for complete removal of existing treatment of old plastered/un plastered surfaces of wall and brooming down and applying two coats exterior emulsion paint (Make :Apex ultima - Asian paint) over coat of water based primercomplete all as specified and as directed.

Material and labour for Plain cement concrete type B1 1:2:4 (using 20 mm graded aggregate )40 mm thick in sub base of floor as levelling course including necessary steel form work complete all as specified and as directed.. .

Material and labour for glass dividing strips 3 mm thick width of strips 38mm and inserted in position to confirm to design.complete all as specified and as directed.

Material and labour for Rubber coated chequered cement concrete tiles 30cm x 30cmx 25mm thick, with grey cement and pigments, with glossy finish on top set, jointed and pointed in neat cement slurry laid over and including 15mm thick screed bed in cement mortar 1:6, etc. complete all as specified and as directed.

Material and labour for Machine pressed precast concrete interlocking colour paver block of 55 to 60 mm thick any shape and size with glossy finish on top confirming to IS 15658-2006 , with grey cement ,M-35 grade complete all as specified and as directed.

Supply and fix Steel rolling shutters (thickness of laths of 1.25mm), with out ball bearing, including top cover, anchoring rod, hasp and staple and one shop coat of primer;erected in position as indicated,gear operated type with bevel gear box and crank handler including taking down existing rolling shutter of any description and make good existing surface and taken as credit complete all as specified and as directed.

Supply and fix Safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and as directed

Supply and fix Ball bearing for rolling shutters complete all as specified and as directed .

Excavation in trenches not exc. 1.5metre deep and not exec 1.5 metre wide and getting out in hard /dense soil.. complete all as specified and as directed..

Material and labour for PCC 1:4:8 type D2 using 40mm graded stone aggregate as in foundatioin, mass concrete etc., complete all as specified and as directed.

Material and labour for Rendering 15 mm thick on fair faces of brick work or concrte surfaces in CM 1:4 finished surface even and smooth without using extra cement complete all as specified and as directed.

Material and labour for Preparation of newly plastered wall surfaces and applying two coats of cement based paint over a coat of chalk whitening .complete all as specified and as directed

Returning, filling in excavated soil including spreading, levelling, watering and well ramming in layers n.exc 25 cm .complete all as specified and as directed

Removing excavated soil n.exc 50 m and depositing where directed at a level n.exc 1.5m above the starting point .complete all as specified and as directed.

Supply and fix Rolled mild steel angle fixed independently, without connecting plates, etc and embedding in concrete post and struts in fencing including securing bolts including cutting tops to shape as directed, drilling holes, flat iron fillets (for securing wire mesh) confirming to Fe 410-W (Gde E-250) quality-A. complete all as specified and as directed.

Excavation in post holes each n.exc 0.5 cu m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n exc 25cm in hard/ dense soil. complete all as specified and as directed.

Material and labour for Plain cement concrete type C2 1:3:6 (using 40mm graded stone aggregate) as in foundation concrete of post holes. complete all as specified and as directed. .

Supply and fix Mild steel deformed round bars 10mm dia and over, cut to length bent to shape required, including cranking, hooking ends and binding with mild steel (annealed) not less than 0.9mm dia. complete all as specified and as directed

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and as directed.

Material and labour for Pre-cast cement concrete solid block masonary type C1, 1:3:6 (using 20 mm graded stone aggregate) exc 10 cm width and setting in CM 1:6.complete all as specified and as directed

Supply only chain link MS galvanised fencing, any size or type complete all as specified and as directed Note:Make of MS Fence : TATA/RINL/SAIL

Supply and fix MS screw bolts (machine made) with hexagonal or square head at one end and screwed to other or screwed both ends of size n exc 5 cm long and 5 to 10mm dia shank bolt. complete all as specified and as directed

Supply and fix Mild steel flats for screwing chain link fencing including securing bolts and similar work conforming to Fe -290 Gde E-165 complete all as specified and as directed.

Excavating over areas not exc 1.50 metre deep and getting out in hard/dense soil complete all as specified and as directed

Surface excavation not exc 30 cm deep and averaging 15 cm deep and getting out in hard/dense soil complete all as specified and as directed.

Material and labour for hard core with broken stone or boulders of gauge not exc 63 mm deposited spread and levelled in layers not exc 15 cm thick and well rammed to a true surfacescomplete all as specified and as directed.

Material and labour for 100 mm thick Plain cement concrete 1:4:8 type D2 using 40 mm graded stone aggregate as in sub base to paver block including necessary form work complete all as specified and as directed .

Material and labour for Brickwork with sub class B bricks ,straight or curved on plan exc 6 metre mean radius built in cement mortar 1:6 complete all as specified and as directed.

Material and labour for Providing cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate ) as in haunching channel inside manholes . Surface finished even and smooth without using extra cement including necessary form work complete all as specified and as directed.

Material and labour for Providing cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate ) as in cills ,steps ,bands ,copings ,bed plates etc including necessary form work complete all as specified and as directed.

Taking down carefully Aluminum/copper point wiring complete for light, fan, 5 A socket, 15 Amps socket, 2 way points and bell point etc in any type of wiring with boards, holders and any type of electrical fittings etc complete & making good the disturbed area and taken as credit complete all as specified and as directed.

Taking down carefully sub main wiring of any type and size and provision of Submain wiring complete with FRLS PVC insulated unsheathed multistranded cable , 1100volt grade , 02 run of 04 sqmm copper conductor cable confirming to IS 694 drawn through and including non metallic rigid PVC CONDUIT of 20 mm dia in Ivory/Grey/white colour medium grade etc fixed in wall/ceiling including provision of FRLS PVC insulated unsheathed multistranded cable , 1100volt grade , 01 run of 04 sqmm copper conductor cable confirming to IS 694 and Connected to earth dolly complete all as specified and as directed. Note :-(i) 03 run of 04 sqmm PVC Cable including 01 run of PVC CONDUIT will be measured as one length . (ii) Make of PVC cable :Finolex/Polycab/RR Kabel (iii) Make of PVC conduit : Avon Plast/Presto plast /Garware

Material and labour for Point wiring 1.5 Sqmm single core PVC insulated FRLS unsheathed 1100 volts grade copper conductor multi-stranded cables for phase and neutral drawn through and including PVC casing capping of suitable size (ISI Marked) with all necessary fittings and provision of one run of green coloured PVC insulated FRLS unsheathed 1100 volts grade copper conductor multi-stranded single core cable of size 1.5 sqmm and connected to common earth dolly including provision of suitable size of modular PVC surface box fixing on wall with and including 2nd HW board with sunmica top cover for mounting switches/sockets etc, type switches, sockets, fan regulators, bell pushes etc. for one light point controlled by one switch 1 way complete all as specified and as directed. NOTE: (i) Make of PVC cable :Finolex/Polycab/RR Kabel (ii) Make of PVC casing and capping : Avon Plast/Presto plast /Garware

All as described in item No.77 here in before but for One exhaust /fan point controlled by one switch and regulator

All as described in item No. 77 here in before but for one 3 pin 05 Amps socket outlet on independent board.

All as described in item No. 77 here in before but for one 05 Amps socket outlet on the same board with other switches.

All as described in item No. 77 but wiring with 2.5 SqmmFRLS PVC insulated unsheathed cable copper conductor multi stranded (for 15 Amps power socket) with one run of copper conductor FRLS PVC insulated multi-stranded cable 2.5 Sqmm for earth continuity conductor and connecting to common earth dolly, complete all as specified and as directed.

Supply and fix switch piano type 5 Amps flush button 230 volts AC one way, complete all as specified and as directed. Make -Anchor /Legrand/Cona

Supply and fix switch piano flush type 15 Amps 230volts, AC one way complete all as specified and as directed.Make -Anchor /Legrand/Cona

Supply and fix socket outlet 5 Amps 3 and 5 pin flush type multipurpose, 230 volts AC one way, complete all as specified and as directed. Make -Anchor /Legrand/Cona

Supply and fixsocket outlet 15 Amps 3 and 5 pin 5 and 15 Amps flush type multipurpose , 230 volts ,AC one way,complete all as specified and as directed. Make -Anchor (Roma)/Legrand/Cona

Supply and fix PVC or Poly carbonate ceiling rose 3 terminal , isolated body suitable for 230 volts AC supply,,complete all as specified and as directed. Make -Anchor /Legrand/Cona

Supply and fix LED INTEGRATED BATTEN T5 tube light fitting type 1x 18/20 watt indoor decorative aluminium extruded T5 LED Battens-integrated type complete with all accesories internally pre-wired and including connecting up with twin core twisted PVC flexible copper conductor cable with suitable size complete all as specified and as directed. Make : Havells cat part no : or equivalent price and specification of M/S Wipro/CG

Supply and fix LED street light fitting 25 Watt 230 V AC outdoor type with high pressure die cast aluminum housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed.. Make : Havells cat part no : or equivalent price and specification of M/S Wipro/CG

Supply and fix in repairs LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and as directed . Make : CG cat part no : LCTLR-36-FO-CDLPor equivalent price and specification of M/S Wipro/Philips

Supply and fix wall mounting fan, 450mm sweep 230V single phase with all fixing accessories including provision of suitable clamps for fixing to wall and good disturbed surfaces matching with existing surface, removing unserviceable wall fan and depositing to MES store complete as specified and directed. Make: Bajaj, Orient, Crompton

Supply and fix ceiling fans complete with blades, down rods, and accessories, including medium grade GI pipe 20mm of suitable lenght from ceiling 230V, 1200 mm swep, min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) and removing unserviceable wall fan and depositing to MES store complete as specified and directed complete as specified and directed. Make: Bajaj, Orient, Crompton

Supply and fix Exhaust fan made of steel body complete with louvers ,shutter ,voltage 230 V ,50 Hz ,heavy dfuty ,copper winding of sweep 450 mm with necessary grouting and fixing arrangements connected with 3 core FRLS PVC flexible copper cable 1.50 sqmm size Pre wired from ceiling rose to connector complete all as specified and as directed. Make : Havells/CG/Bajaj

Taking down old unserviceable MCCB DBs/MCB DB including MCB/MCCB/Isolaters and taken as credit complete all as specified and as directed

Supply and fix Factory made epoxy powder coated distribution board double door TPN 8 ways (VTPN MCCB DB) with metal door (IP-43 protection) fabricated from minimum 1mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, strandard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with Knockouts and suitable for one FP MCCB 125 Amps as incomer and SP/TP MCBs (or any combination of SP/TP MCBs ) outgoings complete all as specified and as directed. Make : Havells/Legrand/L&T

Supply and fix MCCB,4 pole,125 Amps , 16 KA current rating conforming to IEC-609472 & IS-139473 to be fixed in distribution boardcomplete all as specified and as directed.. . Make: Havells/Legrand/L&T

Supply and fix Factory made epoxy powder coated distribution board SPN 12 ways double door with acrylic top cover (IP-43 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, strandard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plate with knockouts and suitable for one SPN MCB 32/40 Amps as incomer and 10 SP MCBs as outgoings complete all as specified and as directed. Make : Havells/Legrand/L&T/Indo Asian

Supply and fix MCB 240V, 10KA 'C' curve , SPN 40 to 63 AMPS for poles and current carrying capacity in the MCB DB complete all as specified and as directed.. . Make: Havells/Legrand/L&T/Indo Asian

Supply and fix MCB 240V, 10KA 'C' curve of SP 6 to 32 AMP for poles and current carrying capacity in the MCB DB complete all as specified and as directed.. . Make: Siemen /Schneider/Havells

Material and labour for Electrical earthing complete with galvanised steel earth plate electrode 60cmx60cmx6mm thick, burried directly in ground vertically, (earth pit not less than 2.25 metre deep below normal ground level) with top edge of the earth plate at a depth not less than 1.5 metre below normal ground level, connected to GI wire 4mm dia (7.5 metre long) by means of bolts, nuts, washers made of galvanized iron connected to earthing to body of equipment. GI wire protected by 15mm dia light grade GI pipe (7.5 metre long) and watering arrangements with 20 mm dia GI pipe medium grade and GI funnel all as specified and shown in Electrical Plate No 3 of MES Schedule (SSR) Part I including necessary excavation and earth work in any type of soil, charcoal dust salt, and PCC 1:2:4 type B1 in chamber, RCC 1:2:4 type, B1 cover slab, 40mm thick with 6mm dia mild steel bars at 100mm centre to centre both ways and with 6mm dia MS hook and testing of Earth resistance complete all as specified and as directed.

Supply , lay and test cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 35 sqmm 3.50 core including lugs,thimbles and ferrules etc laid in trenches ,fixed to wall ,floor etc complete all as specified and as directed.Make : Havells /Poly cab/CCI

Supply , lay and test cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 10 sqmm 2.00 core including lugs,thimbles and ferrules etc laid in trenches ,fixed to wall ,floor etc complete all as specified and as directed.Make : Havells /Poly cab/CCI

Excavation in trenches n exc 1.5m wide and n.exc 1.5m depth and getting out in any type of Soil. for laying of cables/ GI tubes etc complete all as specified and as directed

Material and labour for Double wall corrugated High Density Polymer Ethyl pipe(SDR 17) of ISI marked 63 mm outer dia and 50 mm inner dia including necessary fittings like couplers,bends,end caps etc as in cable protection fixed to poles with necessary suitable MS clamps, bolts, nuts, washers or laid in trenches/ roads crossings etc.complete all as specified and as directed. Make : Ketron/Rex/Duraline

Supply and fix GI pipe light grade 40mm dia with all fittings & fixed complete on pole/walls/in road etc for cable protection complete all as specified and as directed. Note :Make of GI Pipe :TATA/Jindal/Zenith

M/s. KIRAN M CHOUGULE

M/s.Y.N.PATIL

SHRI.H.R.PATIL

N K CONSTRUCTION

ASHOK M RAJGOLKAR

DHANSHRI ENTERPRISES