GE863/EWS-T-35 OF 2022-23

Amount

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc, complete, all as specified and directed.

M & L for rendering 12 mm thick in cement mortar (1:6) on brick work or concrete or stone masonry surfaces finished even and smooth without using extra cement, complete, all as specified and directed.

M & L for rendering 15 mm thick in cement mortar (1:4) on brick work or concrete or stone masonry surfaces using WPC 3% by weight of cement and finished surface even and smooth (without using extra cement), complete all as specified and directed. NOTE: - water proofing compound shall be measured and paid separately as 'supply only'.

Supply only integral water proofing compound, complete, all as specified and directed.

M & L for preparation of new plastered/ unplastered surface of wall and applying two coats of cement base paint over a coat of alkali resistant priming paint, complete, all as specified and directed .

M & L for preparation of new plastered/ unplastered surface of wall and applying two coats of oil emulsion distemper over a coat of chalk whiting, complete, all as specified and directed.

M & L for preparation of new plastered/ unplastered surface of wall and applying three coats of white wash , complete, all as specified and directed.

M&L for preparation of old painted wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coat of synthetic enamel paint, complete, all as specified and directed.

M & L for complete removal of existing treatment, washing, rubbing down and stopping of distempered and painted surfaces of wall and preparing the surfaces and applying two coats of cement based paint, complete, all as specified and directed.

M & L for preparation of old plastered surfaces of wall including brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of oil emulsion distemper, complete, all as specified and directed .

M & L for preparation of old plastered surfaces of wall including brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots, and applying one coat of white wash, complete, all as specified and directed.

M & L for preparation of old plastered surfaces of wall including brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots, and applying one coat of cement based paint, complete, all as specified and directed.

M & L for preparation of old plastered/ unplastered surfaces of ceiling including brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots, and applying one coat of white wash, complete, all as specified and directed .

M & L for preparation of old painted wooden surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint (first quality), complete, all as specified and directed .

M & L for preparation of old painted steel surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint (first quality), complete, all as specified and directed .

M&L for complete removal of old painted steel surface by paint remover or burning off by blow lamps and cleaning with scrapers, any number of coats and any width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, including preparation of steel surface, complete, all as specified and directed .

M & L for writing building Nos, letters or figures (Block,Roman, Italic or Indian) on wall n exc. 30 cm height with synthetic enamal paint, complete all as specified and directed .

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level), complete, all as specified and directed.

M&L for 40 mm thick PCC (1:2:4) type B-1 using 20mm graded stone aggregate as in floor finished even and smooth without using extra cement, complete, all as specified and directed..

M&L for 50 mm thick cement concrete (1:3:6), type C-1, (using20 mm well graded Stone aggregate), as in plinth protection, finishing cement concrete surface fair and even without using extra cement ,laid in alternate panels including forming joints in 2 mtr intervals and filled with bitumen mastics ,complete, all as specified and directed.

M&L for 25mm thick Cement concrete type B-0, 1:2:4 (12.5mm graded stone aggregates) in floor, including rough finished without using extra cement, complete, all as specified and directed.

M&L for Non-skid ceramic tiles, coloured, 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sq m but not exceeding 0.18 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer of cement mortar (1:6), complete, all as specified and directed.

M & L for non skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceding 0.18 sqm but not exceeding 0.38 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in cement mortar (1:6), complete, all as specified and directed.

M&L for coloured chequered cement concrete tiles 30 cm x 30 cm x 25 mm/20cm x 20cm x 25mm thick, With grey cement and pigments, set, jointed and pointed in neat cement slurry ,over and including 15 mm thick screed bed or bedding layer of cement mortar (1:6) over new or existing sub-base in floors, complete, all as specified and directed.

Dismantling floor, hearth or wall tiles including cement mortar, concrete bedding and removing rubbish off the premises, complete, all as specified and directed.

M&L coloured Glazed ceramic tiles in vertical surfaces 350 x 250 x7 mm/ 450 x 350 x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match laid over & including rendering 10mm thick in cement mortar 1:4 on stone masonry surfaces or surfaces other than fair face of brick work to receive glazed tiles, complete, all as specified and directed.

Dismantling of wall and ceiling boards (fiber, pulp, insulation etc.) or insulation boards / slabs / blankets, any thickness including cover fillet, complete, all as specified and directed.

Dismantling timber scantlings under 40 sq.cm in section, in any positions as in framed work but in fillets, rails, posts, rafters, purlins, etc, complete, all as specified and directed.

M & L for second class hardwood plain fillets, square, rectangular or triangular in section, clean sawn, secured with nails or brads of sectional area exc 13 Sq cm & n .exc 25 sq cm, complete, all as specified and directed.cm complete all as specified and directed.

M & L for 6 mm thick plywood, grade BWR, type BB, fixed with screws to timber frame work as in ceiling, complete, all as specified and directed.

M & L for 9 mm thick veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on only one face has decorative veneer fixed to timber frame work, complete, all as specified and as directed.

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, complete, all as specified and directed.

S&F 0.63 mm thick galvanized corrugated mild steel sheeting with two corrugation side lap fixed with coach screws and washers, in roof walls etc with grade of zinc coating 275, complete, all as specified and directed.

All as per item No 32 above but except sheeting ( any thickness)

S&F 0.63 mm thick plain galvanised mild steel sheeting in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275, complete, all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete, all as specified and directed.

Taking down chowkats or frames not exc 1.5 sq.m each but with shutters (without taking off shutters from the frames) including removing from site, complete, all as specified and directed .

Taking down chowkats or frames exc 1.5 sq.m but n.exc 4 sq.m each but with shutters (without taking off shutters from the frames) including removing from site, complete, all as specified and directed.

Taking down shutters of any description not exceeding 1 Sqm each including removal from site, complete, all as specified and directed.

Taking down shutters of any description exceeding 1 Sqm but n.exc 2 Sqm each including removal from site, complete, all as specified and directed.

S & F second class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete, all as specified and directed.

S & F second class hardwood 35 mm thick plain, framed, panelled shutters (any number of panels) with panels of timber flat on both sides (feather edged) or of veneered particle board medium density, wood particle board with commercial face veneers and fitted to chowkats, complete, all as specified and directed.

S & F of 35 mm thick (Batten thickness) 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without shash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc. and sizes of the members of shutters as specified in clause No . 8.24 (a) of MES schedule part – I (Specifications - 2009), supplied and fitted to chowkhats, complete, all as specified and directed. Note :- Glass and wire mesh shall be measured and paid separately in relevant items as "supply only".

S&F 30 mm thick Second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass etc for window and ventilators etc, complete, all as specified and directed. Note :- Glass and wire mesh shall be measured and paid separately in relevant item as "supply only".

Supply only Galvanized mild steel wire cloth, 0.56 mm dia of wire and average width of aperture 1.18 mm and fixed with tinned stacks, or galvanized wire staples,complete, all as specified and directed

Hacking Out Old Broken Glass (Any Thickness,Size,Quality Or Description)From Wooden Frames Or Stone,Concrete Or Brick Surrounds,Glazed With Putty Or fixed with beads, complete, all as specified and directed.

S&F sheet glass, 4mm thick ordinary quality and glazing with oil putty or beadings in square not exc 0.5 sqm in each pane, complete, all as specified and directed.

Supply only sheet glass, 4mm thick ordinary quality and glazing with oil putty or beadings in square not exc 0.5 sqm in each pane,complete, all as specified and directed.

M & L for preparation of surface of wood and wood based materials, steel or iron work, new or old of any description or girth not otherwise described, and treated with tar or coal tar black paint as in ends of posts, back of chowkhats etc. area tarred exc. 0.10 Sqm but not exc. 0.50 Sqm each, complete, all as specified and directed.

M & L for preparation of surface of wood and wood based materials, steel or iron work, new or old of any description or girth not otherwise described, and treated with tar or coal tar black paint as in small articles such as stop, covers, gully gratings, holdfasts, ende of posts, back of chowkats, etc. area tarred not exc. 0.10 Sqm each, complete, all as specified and directed.

S&F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165, complete, all as specified and directed.

M&L for providing cement concrete type C1 1:3:6 using 20 mm well graded stoen aggregate as in hold fast, complete, all as specfied and directed.

S & F 125 mm aluminium, anodised, barrel tower bolts of extruded section, complete, all as specified and directed.

S & F 75 mm aluminium, anodised, barrel tower bolts of extruded section, complete, all as specified and directed.

S & F 300mm aluminium alloy, anodised, sliding door bolt hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed, complete, all as specified and directed.

S & F 75 mm butt hinges, medium weight, cold rolled mild steel and fixed, complete, all as specified and directed.

S & F 100 mm butt hinges, medium weight, cold rolled mild steel and fixed, complete, all as specified and directed.

S&F 125 mm extruded aluminium alloy handle, fabricated type, anodised, compelete, all as specified and directed.

S&F 75 mm extruded aluminium alloy handle, fabricated type, anodised, complete, all as specified and directed.

S&F for IInd Class hard wood of Small fittings such as brackets of any type, latch and hing blocks, shaped door & window stops & the like, including all necessary labours; articles n.exc 200 cu.cm each ,complete, all as specified and directed.

S&F for IInd Class hard wood of Small fittings such as brackets of any type, latch and hing blocks, shaped door & window stops & the like, including all necessary labours; articles exc 200 cu.cm but n exc 500 cu.cm each, complete, all as specified and directed.

S & F mild steel 300mm ordinary rat tail rod pattern springs, including roller and roller plate, complete, all as specified and directed.

M & L for preparation of new wooden surface of any description not otherwise described and exc 10cm width or girth applying two coats of synthetic enamel paint over a coat of prink primer, complete, all as specified and directed.

M & L for preparation of new or previously untreated surfaces of steel of any description , over 10 cm in width or girth not otherwise described applying two coats of synthetic enamel paint (ordinary tint) over a coat of red oxide primer, complete, all as specified and directed.

Dismantling of wrought iron or mild steel work any description and fixed in any position, complete, all as specified and directed.

S&F MS work , Fe-290 (Gde E165) Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc, complete, all as specified and directed.

S & F MS Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165, complete, all as specified and directed.

S&F in repairs aluminium (die cast) body door closer hydraulically regulated designation No 3, universal type suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg, complete, all as specified and directed.

M&L APP based polymeric membrane minimum weighing 3Kgs/Sqm and minimum 3mm thick reinforced with polyster non woven fabric (wt not less than 150gms/Sqm) by forced application complete including removal of existing membrane complete all as specified and directed.

Note:- The total shall subject to adjustment of credit of Rs 39085.00 for old Materials as per Schedule of Credit.

Pankaj Builders

M/S Shamsher Negi Dewa

M/S Gopal Singh

M/S PYARE LAL

A P ENTERPRISES

m/s jupiter builders

M/S Dahiya Builders