Renovation of shops and Construction of protection wall at Bus Stand Billawar.

Amount

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in: a) Cement mortar 1:6 (1 cement: 6 coarse sand). ( conforming to clause 406 of MORT&H speciications). (including all leads & lifts carriages of material by MT/H.L)

Extra for brick work with burnt clay bricks / cement concrete bricks in superstructure above plinth level upto floor five level (including all leads & lifts carriages of material by MT/H.L)

Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS:4454 part-I and M.S. top cover of required thickness for rolling shutters. 80x1.20 mm M.S. laths with 1.20mm thick top cover.

Providing and fixing ball bearing for rolling shutters.

12mm cement plaster of mix 1 : 6 ( 1 cement : 6 coarse sand) (including all leads & lifts carriages of material by MT/H.L)

Finishing walls with water proofing cement paint of required shade on New work )two or more coats applied @ 3.84 kg/ 10 sqm).

Carriage of the following materials by Mechanical Transport from source to site of work incl. loading, unloading and stacking complete :- a) Sand from Billawar crusher for an average lead of 3.00 Km. by M.T. b) Bricks from Hiranagar for an average lead of 70.00 km. by M.T.

M/S RASANT SINGH

RAM PARSHAD KHAJURIA