Tiruppur Corporation_Replacement of 7 50 HP Open Well Submercible motor Cable Sarter at Serangadu Near Kovil Area Replacement of UPVC Pipe Cable at Ellora Garden Replacement of 750 Submercible motor at Rajivi Gandhi Nagar 6th St in Ward No 56

Amount

Supply and Delivery of 50 mm UPVC Column pipe with ISI make etc., Complete as per Standard Specification

Supply and delivery of (75 x 250m LPM)7.50 HP Bore well Submersible pump set conforming to IS 8034/2002 and Suitable for150mm dia borewell conforming to IS 8034/2002 as amended thereafter and BEE 3 StarRated capable of discharging noted LPM against head of water column due to all causes.The pump shall be with stainless steel shaft and dynamically balanced bronze or Cast SSimpeller, brass screws and CI FG 200 grade pump bowl/diffuser with ISI mark. The pumpshall be directly coupled to a continous rated two pole suitable wet type vertical squirrelcage induction motor as per IS9283 /1995 as amended there after, suitable for operationin AC three phase 415 V+/- 10 %, 50 HZ +/- 5 %

Supply and Delivery of PVC Insulatted and Sheathed 3 Core 4Sq.mm Flat type Copper Cable Conforming to IS 694/1990 and as amended thereafter

Labour Charges for the erection of 7.50HP submersible pumpset in borewell/openwell including fixing and jointing submersible cable withproper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, voltmeter, Ammeter, three pilot (indicating) lamps capacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pumpset and trail run for 10 days.

Supply and delivery of (75 x 100m LPM)5.00 HP Open well Submersible pump set conforming to IS 14220 /2002 and as amended thereafter and BEE 3 Star Rated capable of discharging the following duties due to all causes. The pump shall be with stainless steel shaft and dynamically balanced bronze mixed type impeller, CI FG 200 grade casing and brass screws and rotor shall be of copper rod as per IS 613/1984 with ISI mark. The pump suitable for installation in sump with 1.1KV grade 3 core suitable copper flat submersible cable to a length of 15m with necessary cable joints. The nonreturn valve located at the top of the pump in the discharge outlet connection is to be designed with minimum friction. The pump should be directly coupled to 2880 RPM, three phase, 50 Hz (±5), 415V+6% & 415V-15% squirrel cage induction motor suitable for DOL upto 5 HP, Fully Automatic Air break Star Delta up to 20 HP and Auto Transformer starter for above 20 HP starting and for continuous operation.

Add GST @ 18%

JAGANATHAN & CO (BID ID -1116717)