GE(S) BTD 70 OF 2024-25 PERIODICAL SERVICES TO CERTAIN BLDGS IN OTM ACCN ZONE A UNDER AGE BR II UNDER GE (SOUTH) BATHINDA AT BATHINDA MILITARY STATION (2ND CALL)

Amount

External Finishing works

Taking down cement or cement lime plaster of any description,any thickness from external surfaces of wall/soffits etc including racking out joints, hacking for key & scrubbing down with water etc complete all as specified and directed.

Material and labour for rendering/plastering 15mm thick in two layers (10mm and 5mm thick respectively) in cement mortar (1:4) including mixing of liquid water proofing compound as per manufacturer's instructions on brick work or concrete surfaces or in chajjas / parapet walls etc finished even and smooth without using extra cement, complete all as specified and as directed. Note:- WPC will be measured and paid separately.

Supply only integral liquid water proofing compound complete all as specified and directed.

Material and labour for complete removal of existing treatment of any type/description from wall/RCC surfaces/ceiling / chajjas / roof projections etc with mechanical means / grinder complete all as specified and as directed.

Material and labour for applying acrylic thick wall care putty on external surfaces of walls / ceiling / soffits ( thickness vary from 1.5 to 2.5mm as required for desired smoothness and levelling of surfaces in two or more layers) by using ready made wall care putty including sand papering after filling the putty to make surface smooth and ready for receiving painting etc including removing the vegitation of any type and description the making the surface good complete all as specified and directed. Make of wall putty:- JK wall putty / Birla wall care putty / Bison Wall Putty. Note:- (i) The prepared surface after wall putty, the contractor will inform to the GE as well as to the Engineer-in-Charge for site inspection before applying further finishes. Please note that the further finishes work will start only after approval of the prepared surface from the GE as well as to the Engineer-in-Charge through site order.

Material and labour for preparation and applying 02 coats of exterior emulsion paint (light shade) with highlighter of any approved shade @ 5 Sqm/litre/2 coats by using roller to external walls / RCC surfaces/soffits of chajjas / roof projections /cantilivers/ balcony etc surfaces over & including a coat of exterior wall primer @ 11 Sqm/litre/1 coat as recommended for under coat by manufacturer of exterior emulsion by using brands of emulsion and primer as per given in the CA complete all as specified and directed. Make of exterior wall primer:- Asian / Berger / Nerolac (Best Quality). Make of exterior Emulsion :- Asian (Apex) / Berger (Weater coat anti dust) / Nerolac (Excel Total).

Material and labour for preparation of existing surfaces and applying 01 coat of exterior emulsion paint (light shade) with highlighter of any existing shade @ 10 Sqm/litre/1 coat by using roller to external walls / RCC surfaces/soffits of chajjas / roof projections /cantilivers/ balcony etc surfaces over & including a coat of exterior wall primer @ 10 Sqm/litre/1 coat as recommended for under coat by manufacturer of exterior emulsion by using following brands of emulsion and primer as per given in the CA including removing the vegitation of any type and description the making the surface good complete all as specified and directed. Make of exterior wall primer:- Asian / Berger / Nerolac (Best Quality). Make of exterior Emulsion :- Asian (Apex) / Berger (Weater coat anti dust) / Nerolac (Excel Total).

Internal Finishing works

Taking down cement or cement lime plaster of any description, any thickness from internal surfaces of wall/soffits/ceiling etc including racking out joints, hacking for key & scrubbing down with water etc complete all as specified and directed.

Material and labour for rendering/plastering 10mm thick in cement mortar (1:6) on fair old brick or concrete surfaces of walls/pillars /cornices in patches matching with existing, finished even and smooth without using extra cement, complete all as specified and as directed.

Material and labour for rendering 5 mm thick in cement mortar 1:3 on fare faces of concrete ceiling surfaces finished fair and smooth without using extra cement complete all as specified and directed.

Material and labour for complete removal of existing treatment of any type / description from wall / RCC surfaces / ceiling / chajjas / roof projections etc with mechanical means / grinder complete all as specified and as directed.

Material and labour for applying acrylic thick wall care putty on internal surfaces of walls / ceiling ( thickness vary from 1.5 to 2.5mm as required for desired shoothness and levelling of surfaces in two or more layers) by using ready made wall care putty including sand papering after filling the putty to make surface smooth and ready for receiving painting etc complete all as specified and directed. Make of wall putty:- JK wall putty / Birla wall care putty / Bison Wall Putty. Note:- (i) The prepared surface after wall putty, the contractor will inform to the GE as well as to the Engineer-in-Charge for site inspection before applying further finishes. Please note that the further finishes work will start only after approval of the prepared surface from the GE as well as to the Engineer-in-Charge through site order.

Material and labour for preparation and applying 02 coats of interior emulsion paint (light shade) @ 10 Sqm/litre/2 coats by using roller/brush to walls surfaces over & including a coat of interior wall primer @ 10 Sqm/litre/1 coat as recommended for under coat by manufacturer of interior emulsion by using following brands of emulsion and primer complete all as specified and directed. Make of interior wall primer:- Asian / Berger / Nerolac (Best Quality). Make of interior Emulsion :- Asian (Tractor) / Berger (Bison) / Nerolac (Beauty Smooth).

Material and labour for preparation and applying 02 coats of interior emulsion paint (white shade) @ 10 Sqm/litre/2 coats to ceiling surfaces by using roller/brush to walls surfaces over & including a coat of interior wall primer @ 10 Sqm/litre/1 coat as recommended for under coat by manufacturer of interior emulsion by using following brands of emulsion and primer complete all as specified and directed. Make of interior wall primer:- Asian / Berger / Nerolac (Best Quality). Make of interior Emulsion :- Asian (Tractor) / Berger (Bison) / Nerolac (Beauty Smooth).

Material and labour for preparation of existing treated surfaces on walls / ceilings and applying 01 coat of interior emulsion paint (light shade) @ 20 Sqm/litre/1 coat by using roller to walls surfaces over & including filling wall putty in depressions, and preparing and making the surface smooth and applying a coat of interior wall primer @ 10 Sqm/litre/1 coat as recommended for under coat by manufacturer of interior emulsion by using following brands of emulsion and primer complete all as specified and directed. Make of interior wall primer:- Asian / Berger / Nerolac (Best Quality). Make of interior Emulsion :- Asian (Tractor) / Berger (Bison) / Nerolac (Beauty Smooth).

Material and labour for preparing newly plastered surface of walls and applying three coats of white wash by making the lime slaked at site and shall be mixed and stirred with about five litres of water for 1 Kg of unslaked lime to make a thin cream,. This shall be allowed to stand for a period of 24 hours and shall then be screened through clean coarse cloth. 1 Kg of gum dissolved in hot water shall be added to every one cubic meter of lime cream. About 1.3 Kg of sodium choloride dissolved in hot water shall also be added for every 10 Kg of lime for making the coating hard and rub-resistant. Small quantity of ultramarine blue (upto 3 gm per Kg of lime) shall also be added to the last two coats of white wash solution and the whole solution shall be stirred throughly before use complete all as specified & directed.

Material and labour for preparing newly plastered surface of ceiling and applying three coats of white wash by making the lime slaked at site and shall be mixed and stirred with about five litres of water for 1 Kg of unslaked lime to make a thin cream,. This shall be allowed to stand for a period of 24 hours and shall then be screened through clean coarse cloth. 1 Kg of gum dissolved in hot water shall be added to every one cubic meter of lime cream. About 1.3 Kg of sodium choloride dissolved in hot water shall also be added for every 10 Kg of lime for making the coating hard and rub-resistant. Small quantity of ultramarine blue (upto 3 gm per Kg of lime) shall also be added to the last two coats of white wash solution and the whole solution shall be stirred throughly before use complete all as specified & directed.

Material and labour for preparing existing treated surfaces of walls including cornices and applying two coats of white wash by making the lime slaked at site and shall be mixed and stirred with about five litres of water for 1 Kg of unslaked lime to make a thin cream,. This shall be allowed to stand for a period of 24 hours and shall then be screened through clean coarse cloth. 1 Kg of gum dissolved in hot water shall be added to every one cubic meter of lime cream. About 1.3 Kg of sodium choloride dissolved in hot water shall also be added for every 10 Kg of lime for making the coating hard and rub-resistant. Small quantity of ultramarine blue (upto 3 gm per Kg of lime) shall also be added to the last two coats of white wash solution and the whole solution shall be stirred throughly before use complete all as specified & directed.

Material and labour for preparing existing treated surfaces of ceilings including cornices and applying two coats of white wash by making the lime slaked at site and shall be mixed and stirred with about five litres of water for 1 Kg of unslaked lime to make a thin cream,. This shall be allowed to stand for a period of 24 hours and shall then be screened through clean coarse cloth. 1 Kg of gum dissolved in hot water shall be added to every one cubic meter of lime cream. About 1.3 Kg of sodium choloride dissolved in hot water shall also be added for every 10 Kg of lime for making the coating hard and rub-resistant. Small quantity of ultramarine blue (upto 3 gm per Kg of lime) shall also be added to the last coat of white wash solution and the whole solution shall be stirred throughly before use complete all as specified & directed.

Synthetic Enamel Painting on Steel Surfaces

Material and labour for complete removal of existing treatment, preparing steel and iron surfaces of any description / section / trusses/ purlins, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete as specified and as directed. Make:- Asian Paints / Berger / Nerolac.

Material and labour for preparing old painted steel and iron surfaces of any description / section / trusses/ purlins, not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete as specified and as directed. Make:- Asian Paints / Berger / Nerolac.

Synthetic Enamel Painting on Wooden Surfaces

Material and labour for preparation of old painted wood & wood based surfaces of any description not otherwise described over 10cm width or girth by cleaning the dust and removing all loose particle with using clean cloths and dry paint brush & applying one coat of synthetic enamel paint (1st quality) of approved tint/colour to achieve glossing finish with using paint brush complete as specified and as directed. Make:- Asian Paints / Berger / Nerolac.

M J BUILDERS (BID ID -3171230)

BALAJI CONSTRUCTIONS (BID ID -3165508)

RINKU BROTHERS (BID ID -3165591)

AP BUILDERS (BID ID -3165409)