WELCOME MAINTENANCE TO VARIOUS QUARTERS OF VAYUSENABAD AT AF STN TUGHLAKABAD UNDER GE (AF) TUGHLAKABAD

Amount

M&L for preparing the old decorated plastered or un-plastered surfaces of ceiling by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spot and applying one coat of white wash complete all as specified and directed by Engr-in-charge.

M&L for preparing the old distempered surfaces of wall, pilasters, cornices etc by washing, rubbing down & stopping etc and applying one coat of oil bound distemper duly adding pigments, filling all the holes with putty and making uniform, smooth surface complete all as specified and directed by Engr-in-charge.

M&L for preparing old distempered surfaces of wall by complete removal of the existing treatment and applying two coats of oil bound distemper over a 1 mm thick uniform wall putty complete all as specified and directed by Engr-in-charge.

M&L for preparing the old decorated surfaces of wall, pilasters, cornices etc by complete removal of the existing treatment and applying one coat of cement base paint duly adding pigments to required colour filling all the holes and making uniform, smooth surface complete all as specified and directed by Engr-in-charge.

M&L for preparing the old decorated plastered or un-plastered surfaces of ceiling by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spot and applying two coat of white wash complete all as specified and directed by Engr-in-charge.

M&L for preparing the new plastered surfaces of wall, pilasters, cornices etc and applying two coat of cement base paint duly adding pigments to required colour complete all as specified and directed by Engr-in-charge.

M&L for preparing the old decorated surfaces of wall, pilasters, cornices etc by complete removal of the existing treatment and applying one coat of apex exterior paint duly adding pigments to required colour filling all the holes and making uniform, smooth surface complete all as specified and directed by Engr-in-charge.

M&L for preparation of old painted wooden surfaces over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engr-in-charge.

M&L for preparation of the old painted surfaces of steel and iron work of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engr-in-charge.

M&L for preparation of old painted brick, stone, concrete work or plastered surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engr-in-charge.

M&L for preparation of old painted wooden surfaces over 10 cm width or girth and applying one coat of varnish finishing filling all holes with wood based materials and making good complete all as specified and directed by Engr-in-charge.

S&F in repair to 500 Litre capacity three layered rotational moulded polyethylene water storage tank (Cylindrical vertical with closed tap) hoisted and fixed in position including 20 mm dia GI pipe medium grade washout pipe of 450 mm long with plug and 20 mm dia GI pipe medium grade overflow pipe of 600 mm long with fittings and dismantling of the existing tank complete all as specified and directed by Engr-in-charge.

Ditto- all as per sl item No 12 above but 1000 litres capacity complete all as specified and directed by Engr-in-charge.

Taking up or down existing steel tubing/PPR pipe of any grade and connections including making good the disturbed surfaces complete all as specified and directed by Engr-in-charge for the following sizes:- 15 mm dia bore

All as per sl item No 14.00 but 20 mm dia bore complete all as specified and directed by Engr-in-charge.

Supply, fixing, jointing and testing galvanized iron tube of medium grade with all fittings such as bends, elbow, socket, reducer etc and fixed to wall, ceiling or laid in floors complete all as specified and directed by Engr-in-charge for the following sizes:- 15 mm dia bore

All as per sl item No 16.00 but 20 mm dia bore complete all as specified and directed by Engr-in-charge.

Fixing only old steel tubing of any grade and connections obtained from taking down against item No above herein before in new or old position fixed to wall, ceiling or laid in floor with new fittings and cleaning for re-fixing complete all as specified and directed by Engr-in-charge for the following sizes:- 15 mm dia bore

All as per sl item No 18.00 but 20 mm dia bore complete all as specified and directed by Engr-in-charge.

S&F in repairs of 20 mm dia bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed complete all as specified and directed by Engr-in-charge.

S&F in repairs of fancy type chromium plated cast copper alloy bib taps of crutch or butterfly handle, long shank & cup of 15 mm dia bore complete all as specified and directed by Engr-in-charge.

S&F in repair of PTMT bib tap suitable for 15mm dia pipe of any colour screwed down, screwed for iron pipe or brass ferrule complete with check nut 15mm bore complete all as specified and directed by Engr-in-charge.

S&F in repair of Wall mixture 15mm bore dia cast copper alloy with chromium plated screwed down high pressure with or without lettered "Hot" or "Cold" with long screwed shanks and fly buts screwed for iron pipe complete all as specified and directed by Engr-in-charge.

S&F in repair 15 mm dia bore stop valve, cast copper alloy, screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipes or for union and fixed complete all as specified and directed by Engr-in-charge.

S&F in repairs 15 mm dia bore stop valves cast copper alloy chromium plated fancy type with long shank & cup (concealed type) complete all as specified and directed by Engr-in-charge.

S&F in repairs 15 mm dia bore cast copper alloy chromium plated fancy type angle cock with long shank & cup (concealed type) complete all as specified and directed by Engr-in-charge.

S&F in repairs 10 ltrs capacity PVC low level flushing cistern white with inlet, float valve and handle including bracket with 32 mm dia PVC pipe 600 mm long complete all as specified and directed by Engr-in-charge.

S&F in repair vitreous china squatting pan “Orissa pattern” of size 580mmx440mm ‘white’ with integral foot rest (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe anti syphonage pipe etc necessary concrete bedding and making good the disturbed surfaces complete all as specified and directed by Engr-in-charge.

S&F in repair vitreous china wash down water closet pan (pedestal pattern) white (excluding flushing cistern and flush pipe) including connection to drain or outgoing pipe and flush pipe anti syphonage pipe etc and making good the disturbed surfaces of floor complete all as specified and directed by Engr-in-charge.

S&F Health Faucet with 1.5mtr long SS tube and stand/ hook complete all as specified and directed by Engr-in-charge.

S&F in repair cast copper alloy chromium plated jet spray as per sample for EWC complete all as specified and directed by Engr-in-charge.

S&F in repair water closet seat cover white colour closed pattern with flat bottom covered and mild steel chromium plated hinging device complete all as specified and directed by Engr-in-charge.

S&F in repair vitreous china wash basin, white, flat back of size 550 mm x 400 mm fixed over cast iron cantilever brackets of 32 mm dia, brass waste coupling and including fixing of tap, waste fitting and union complete all as specified and directed by Engr-in-charge. Note : Pillar tap only shall be measured separately under respective item in this schedule and balance all shall include in the quoted rate..

S&F in repair PVC connection 15 mm dia and 450 mm long with both end brass fly nut complete all as specified and directed by Engr-in-charge.

S&F in repair 15 mm dia bore pillar taps cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered ‘Hot’ or “cold’ with long screwed shank and fly nuts, screwed for iron pipe and fixed complete all as specified and directed by Engr-in-charge.

S&F in repairs 15 mm dia bore cast copper alloy chromium plated fancy type mixer pillar tap for cold & hot water complete all as specified and directed by Engr-in-charge.

S&F in repair 32 mm bore of pipe low density (LDPE) of pressure rating 6 Kg per Sqcm fixed to wall or floor etc including fittings complete all as specified and directed by Engr-in-charge.

S&F in repair brass chromium plated bottle trap of 32mm bore for wash hand basin with inlet and outlet and screwed for pipe or fixed complete all as specified and directed by Engr-in-charge.

Supply only 32mm dia waste fitting brass chromium plated for basin with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed by Engr-in-charge.

S&F in repair kitchen plate rack of size 600mm x 900 mm made of stainless steel 1 mm thick fixed on the wall with plugs, nuts & washers complete all as directed by Engr-in-charge.

S&F in replacement of Sink with draining board made of stain less steel 1 mm thick kitchen or laboratories with plugs, washer and wastes, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915x 460x bowl size 410x330x160mm complete all as specified and directed by Engr-in-charge.

S&F in replacement of Sink without board made of stain less steel 1 mm thick kitchen or laboratories with plugs, washer and wastes, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495x 420x bowl size 410x330x160mm complete all as specified and directed by Engr-in-charge.

S&F in repair aluminium anodised tubular towel rail of 20 mm dia D type, 60 cm long between flanges complete all as specified and directed by Engr-in-charge.

S&F in repair toilet paper holder of size 13 cm x 13 cm x 7 cm chromium plated of glossy finish fixed to wall with chromium plated brass screw complete all as specified and directed by Engr-in-charge.

S&F in repair 125 mm fancy type shower rose brass chromium plated with CP arms for 15mm bore GI pipe complete all as specified and directed by Engr-in-charge.

S&F in repair Soap dish of brass chromium plated of oval shape of cost not less than Rs 150.00 as per the sample kept in AGE B/R office fixed to wall with brass chromium plated screws complete all as specified and directed by Engr-in-charge.

S&F in repair aluminium powder coated Drapery curtain rod of 25mm dia fancy type including MS bracket, side knob, corner bracket etc complete all as specified and directed by Engr-in-charge.

S&F in repair 25mm ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm - 210 gms) etc complete all as specified and directed by Engr-in-charge.

S&F in repair gun metal gate valves with iron wheel head 20mm complete all as specified and directed by Engr-in-charge.

S&F in repair of PVC siphon flush kit with all fitting accessories single flush tank kit for cistern tank complete all as specified and directed by Engr-in-charge. Make: Crotomark or equivalent

S&F in repair of floor mounted western toilet/commode S/P trap square white water closet (EWC) including complete all fittings complete all as specified and directed by Engr-in-charge. Make: Linum Ceramic/Cera/Hindware

S&F in repair MS moritce lock 4 levers of vertical type size 100mm complete all as specified and directed by Engr-in-charge.

S&F for repairs of cast iron drawer pulls 3 screw plate with fixed pulls 80mm to 100mm long complete all as specified and directed by Engr-in-charge.

S&F in repairs of brass drawer handles projection drop(50mm to 65mm)on screwed plate complete all as specified and directed by Engr-in-charge.

S&Fin repair knobs for cub board fixed in nut screw and washers of brass complete all as specified and directed by Engr-in-charge.

S&F in repair hasp and staples 100mm long alluminium anodized complete all as specified and directed by Engr-in-charge.

S&F in repair to gate and shutter hooks of and eyes of 75mm brass wire plated type-I complete all as specified and directed by Engr-in-charge.

Demolition of cement concrete (unreinforced) in ground floor and paving not exceeding 15 cm thickness (below or above ground level) complete all as specified and directed by Engr-in-charge.

M&L for 40 mm thick PCC (1:2:4) type B-1 using 20 mm graded stone aggregate surface finished even and smooth using extra cement as in flooring complete all as specified and directed by Engr-in-charge.

Dismantling floor, stone, hearth or wall tiling including cement mortar bedding but not backing, removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engr-in-charge.

M&L for 18 to 20 mm granite slab of any size for service counter and platform over and including 15 mm thick screed bed or bedding layer of cement mortar (1:4) laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including making good the edges complete all as specified and directed by Engr-in-charge.

M&L for glazed ceramic colour tiles of size 300mmx 200mm of 7 mm thick set and jointed in neat cement slurry and pointed in coloured cement on vertical surfaces such as in dado/skirting etc over and including 10 mm thick backing coat in cement mortar (1:4) complete all as specified and directed by Engr-in-charge.

M&L for non skid coloured tiles of 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm (300 mmx300mm x 7mm thick) set and jointed in neat cement slurry and pointed in colour cement as in floor over and including 15 mm thick screed bed or bedding layer of cement mortar (1:6) complete all as specified and directed by Engr-in-charge.

M&L for non skid coloured tiles of 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm (400 mmx400mm x 8mm thick) set and jointed in neat cement slurry and pointed in colour cement as in floor over and including 15 mm thick screed bed or bedding layer of cement mortar (1:6) complete all as specified and directed by Engr-in-charge.

Description all as per item No 66 above but on vertical surfaces over 10 mm thick backing coat of cement mortar (1:4) complete all as specified and directed by Engr-in-charge.

M&L for non skid coloured tiles of 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm set and jointed in neat cement slurry and pointed in colour cement as in floor over and including 15 mm thick screed bed or bedding layer of cement mortar (1:6) complete all as specified and directed by Engr-in-charge.

Description all as per item No 68 above but on vertical surfaces over 10 mm thick backing coat of cement mortar (1:4) complete all as specified and directed by Engr-in-charge.

S&F in repair 100 mm dia cast iron floor trap with grating including jointing to waste pipe in run lead fixed in concrete (1:2:4) type B-1 complete all as specified and directed by Engr-in-charge.

S&F in repair 110 mm bore PVC (SWR) pipes single socketed in any length with adhesive joint laid in trenches or in floor including taking down the existing unserviceable pipe complete all as specified and directed by Engr-in-charge.

Taking down cement plaster along with tiles on brick or stone wall surfaces including raking out joints, hacking for key and scrubbing down with water complete all as specified and directed by Engr-in-charge.

M&L for rendering 15mm thick in cement mortar 1:6 on other than fare face of brick work or concrete surfaces and finishing the surface even & smooth without using extra cement including taking down cement plaster on any height complete all as specified and directed by Engr-in-charge.

M&L for rendering 5mm thick in patches in cement mortar in 1:3 on ceiling including taking down cement plaster on any height complete all as specified and directed by Engr-in-charge.

M&L for Rendering 15mm thick in cement mortar in 1:4 in two layers with backing coat 10 mm thick and second coat 5 mm thick with WPC on fare face of brick work or concrete surfaces even and smooth without using extra cement complete all as specified and directed by Engr-in-charge. Note: WPC shall be measured and paid separately.

M&L for preparing new surfaces of walls and applying two coats of Oil bound distemper on new surface complete all as specified and directed by Engr-in-charge.

All as per sl item No 76 above but white wash on ceiling.

All as sl per item No 76 above but two coat of cement base paint on walls.

S&F in repair corner glass shelf of 300mm long fixed on the wall with nuts & washers complete all as specified and directed by Engr-in-charge.

S&F in repair of glass shelf 450 mm long on wall with screws and making good surface of wall complete all as specified and directed by Engr-in-charge.

Taking down chowkats or frame with shutter (without taking out shutter from the frame) not exceeding 1.50 Sqm each as doors, windows & ventilators etc. and removal from site complete all as specified and directed by Engr-in-charge.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube in opening as per specification & drawing mentioned in SSR complete all as specified and directed by Engr-in-charge.

S&F for 30 mm thick factory made solid panel PVC door shutter confirming to criteria of testing as per IS : 4020, consisting of frame made out of MS tube of 19 gauge thickness & size 19x19mm for stiles and 15x15mm for top & bottom rails MS frames shall have a coat of red oxide primer of approved make and shall be covered with 5mm thick heat moulded PVC `C' channel of size 30x50mm forming styles and 5mm thick 75mm wide PVC sheets for top rail lock rail and bottom rail on either side and 10mm (5mmx2) thick 20mm wide cross PVC sheet as gap insert for top rail and bottom rail paneling of 5 mm thick PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rail with 30 mm wide x 5 mm thick PVC sheet beading on either side and joined together with solvent cement, adhesive and an additional 5 mm thick PVC strip of 20 mm width is to be struck on the interior side of 'C' channel using PVC solvent adhesive complete as per manufacturers specifications & drawings and complete all as specified and directed by Engr-in-charge.

S&F in repair of continuous (piano)hinges MS bright finish or electrogalvanised 30mm width of flaps (when open) complete all as specified and directed by Engr-in-charge.

M&L in repair of prelaminated particle board of 18/ 19mm thick exterior grade both sides with decorative face with veneer on both sides using cub boards finished with fixed with screws to timber frame complete all as specified and directed by Engr-in-charge.

S&F in repair of 4mm thick sheet glass for window/ventilators ordinary quality and glazing with rubber beading in square exceeding 0.50 Sqm in each pane complete all as specified and directed by Engr-in-charge.

S&F in repair of stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples and including dismantling of old mesh complete all as specified and directed by Engr-in-charge.

S&F in repair of 100mm extruded aluminium alloy handles, fabricated type anodised complete all as specified and directed by Engr-in-charge.

Taking down shutter of any description and refixing in same opening are exceeding 1.0 Sqm but not exceeding 2.0 Sqm each complete all as specified and directed by Engr-in-charge.

S&F in repair of 35mm thick IInd class HW plain framed panelled shutter (any numbers of panel) with lock rail & panel of 9mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneered on both faces, size of rail as per IS: 1003 (part-I), kiln seasoned & chemically pressure treated complete all as specified and directed by Engr-in-charge.

S&F in repair of aluminium die cast of door closer hydraulically regulated designed No 3 universal type suitable for door shutter size of 850mm to 1000mm in width weight between from 61 to 80kg and fixed complete all as specified and directed by Engr-in-charge.

S&F in repair of aluminium anodised 100 mm long Butt hinges with galvanised mild steel screws complete all as specified and directed by Engr-in-charge.

S&F in repair of aliminium anodised barrel tower bolts, 150 mm long complete all as specified and directed by Engr-in-charge.

S&F in repair of 150mm extruded aluminium alloy handles, fabricated type anodised complete all as specified and directed by Engr-in-charge.

V r traders

ANAND ENTERPRISES

AMIR ENTERPRISES

akenterprises

M/s.sagar enterprises