Loading
Loading…
Loading…
Tender Value
₹5.7 L
EMD Value
₹7,200
Closing Date
8 Oct 2026, 5:00 pm
SO EnM Rajhara Area
CCL GM office Rajhara Area
11 KV OH HT line for providing 3-phase line to the CAAQMS room in Tetariyakhar OCP under Rajhara Area and for supplying 3-phase power along with ancillary electrical requirements at Rajhara ocp under Rajhara Area
2026_CCL_366154_1
GM(RA)/CHANDWA/EnM/26-27/10 Dated 25.09.2026
Open Tender
Electrical and Maintenance Works
Item Rate
30 days
Rajhara OCP and TTK OCP
As per NIT
2 documents required · 2 mandatory
₹7,200
25 Sept 2026
25 Sept 2026
9 Oct 2026
25 Sept 2026
8 Oct 2026
25 Sept 2026
25 Sept 2026 - 3 Oct 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | TTK OCP SECTION Erection of steel tubular or rail pole strut in cement concrete 1:3:6 (1cement: 3coarse sand: 6 graded stone aggregate 40mm nominal size) foundation including excavation and refilling and secured with holding clamps, bolts, nuts, etc. as required. | 6 | Each | - | - |
| 2 | Supplying and erection of galvanised stay set for 11KV overhead lines complete with 19/20 mm dia X 1.8 metres long stay rod,anchor plate of size 45cm X 45cm X 7.5 mm thick, thimble,stay clamps, turn buckle(20mm X 600mm),7/4.00 mm dia G.I.stay wire and11 KV strain insulator etc in cement concrete 1:3:6 (1cement : 3coarsesand: 6graded stone aggregate 40mm nominal size ) foundation including excavation and refilling etc. as required. | 6 | Set | - | - |
| 3 | Supplying of channel iron75mmX40mmX6mm (7.14kgpermetre)cross arm for 4wire overhead line complete with clamps,bolts, nuts and washer etc including drilling of holes for insulator pins etc (as per drawing) and painting with primer and finished paint as required. | 12 | Each | - | - |
| 4 | Supplying and erection of 11 KV pin insulator complete with large steel head G.I. pin, nuts, washers etc. as required. | 40 | Set | - | - |
| 5 | Supplying of channel iron 75mmX40mmX6mm (7.14kg per metre)cross arm for two 11KV over head line conductors complete with 50 mmX50mmX6mm (angle iron bracket welded to the channel iron and complete with 50mmX6mm M.S. flat iron clamps,bolts and nuts including drilling holes for insulator pins, bolts, nuts and washers etc (as per drawing) and painting with primer and finish paint as required. | 12 | Each | - | - |
| 6 | Erection of cradle guard as required. | 12 | Each | - | - |
| 7 | Supplying and erection of 15 A aerial fuse complete as required. | 9 | Each | - | - |
| 8 | Erection of ACSR conductor of 7/3.35 mm to 7/4.00 diameter and above including binding etc. as required. | 264.5 | KG | - | - |
| 9 | Erection of G.I. Wire No. 8 SWG including binding etc. as required. | 10 | KG | - | - |
| 10 | Erection of angle iron/ channel iron cross arm on wood/ RCC/ PCC/ steel tubular/ rail pole etc. as required. | 15 | Set | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 2.30 MB
BOQ_379084.xls
BOQ • 0.31 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .