Job 1 Construction of Ayurvedic Health Centre at Village Polian Beet, Tehsil Haroli District Una HP Sub Head C.O Building portion , WS and SI therein

Amount

Excavation in foundation trenches etcetera in all classification of soil such as pick work,jumper work,pick jumper work,blasting work and hard blasting work in dry or saturated condition upto any depth and lift including pumping and bailing out water where required including stacking the serviceable and unserviceable material separately as directed and then returning the stacked soil in 15cm(fifteen centimeter) layers when required into plinth and sides of foundation etcetera consolidating each deposited layer by ramming and watering and then disposing of all surplus unserviceable excavated earth as directed by the Engineer in charge including entire carriage of material and disposal all surplus excavated/bored out earth within all leads and lifts and other incidentials .Any loss to the public /private property during the course of execution shall be abssolute respossibility to the contractor which shall have to be duly compensated by him in all cases as per the direction by the Engineer-in-charge .The rate includes octroi, royality, malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government..

Excavation in earth work and banking in 20cm.(twenty centimetre ) layers including breaking clods,ramming and dressing ground for thepurpose of making embankment or fillingup ground depressions upto any lead including carriage of material within all leads and lifts and other incidentials.The rate includes octroi, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government.

Filling in plinth with sand under floor including watering ramming consolidating and dressing complete for all heights including entire carriage of material and disposal all surplus excavated/bored out earth within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rate includes octroi, royality, malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government .

Providing form work with steel plates 3.15mm(three decimal fifteen millimeter) thick welded with angle iron in frame of 30x30x5 mm (thirty into thirty into five millimeter) size so as to give a fair finish including centering shuttering strutting and propping etcetera with wooden battens and ballies for all heights of propping and centering below supporting floor to ceiling not exceeding 4 meter and removal of same for in-situ reinforced concrete and plain concrete work in flat surfaces such as soffits of suspended floors roofs landings and the like floors in all thickness in all floor level including carriage of material entire within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rate includes octroi, royality, malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government.

Providing form work with steel plates 3.15mm(three decimal fifteen millimeter) thick welded with angle iron in frame of 30x30x5mm(thirty into thirty into five millimeter)so as to give a fair finish including centering ,shuttering, strutting and propping etcetera with wooden battens and ballies for all heights of propping and centering below supporting floor to ceiling not exceeding 4 meter and removal of the same for in-situ reinforced concrete and plain concrete work in stair cases with sloping or stepped soffits excluding landing complete upto floor all level including carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rate includes octroi, royality, malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government. .

Providing form work with steel plates 3.15mm(three decimal fifteen millimetre) thick welded with angle iron in frame of 30x30x5mm(thirty into thirty into five millimetre) size so as to give fair finish including centering ,shuttering ,strutting and propping etcetera with wooden battens and ballies for all heights of propping and centering below supporting floor to ceiling not exceeding 4 meter and removal of the same for in-situ reinforced concrete and plain concrete work:- in edges of slabs and breaks in floors and walls etcetera upto any width /height complete upto all floor level including carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and laying cement concrete 1:4:8 (one cement: four sand:eight graded crushed stone aggregate 40mm( forty millimeter nominal size) mechanically mixed and curing complete excluding cost of form work in foundation and plinth in all heights / depths including enitre carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and laying reinforcement cement concrete work of grade M-20(M-twenty )design mix to obtain the minimum crushing strength of 20 N/mm2 (twenty Newton per millimetre square ) with minimum cement content of 340 kg (three hundred forty kilogramme ) per cubic metre mechanically mixed including curing complete excluding cost of form work and reinforced concrete work in foundation and plinth including carriage of materials within all leads and lifts and other incidentals.The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government..

Providing and laying damp proof course 38mm (thirty eight millimetre)thick with cement concrete 1:2:4 (One cement:two sand:four graded crushed stone aggregate 12.5mm (twelve point five millimetre )nominal size) and curing complete.including carriage of materials within all leads and lifts and other incidentals.The rate includes octroi, royality, malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government.

Applying a coat of hot bitumen (mexphalt 80/100 or equivalent) using 1.70 kg. (one point seventy kilogramme)per square metre on damp proof course after cleaning the surface with a piece of cloth lightly soaked with kerosene oil.including carriage of materials within all leads and lifts and other incidentals.The rate includes octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government..

Providing and laying reinforcement cement concrete work of grade M-20(M-twenty )design mix to obtain the minimum crushing strength of 20 N/mm2 (twenty five Newton per millimeter square ) with minimum cement content of 340 kg (three hundred forty kilogramme ) per cubic meter mechanically mixed and vibrated including curing complete excluding cost of form work and reinforced concrete work in foundation,footing bases of columns and the like and mass concrete in all depth/heights including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rate includes octroi, royality, malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government..

Providing and laying reinforcement cement concrete work of grade M-20(M-twenty )design mix to obtain the minimum crushing strength of 20 N/mm2 (twenty Newton per millimetre square ) with minimum cement content of 340 kg (three hundred forty kilogramme ) per cubic metre mixed and vibrated mechanically, and curing complete to give a smooth and even surface including centering and shuttering etcetra but excluding cost of reinforcement in string course coping bed plates, anchor blocks plain window sills and the like Up to all floor level complete including carriage of materials within all leads and lifts and other incidentals.The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government..

Providing and laying tor steel reinforcement for reinforced cement concrete work including .bending binding,straightning and placing in position complete in all heights including cost of binding wire complete and carriage of material within all leads and lifts and and other incidentals.The rate includes octroi, royality, malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government.

Brick work using second class common burnt clay building bricks in foundation and plinth in cement mortar 1:6(one cement: six sand ) including curing complete and carriage of material with in all leads and lifts and other incidentals.The rate includes octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government..

Brick work second class common burnt clay building bricks in superstructre in cement mortar 1:6(one cement: six sand ) including curing complete and carriage of material with in all leads and lifts and other incidentals.The rate includes octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government..

Second class half brick masonry in common burnt clay building bricks in Cement mortar 1:4(One cement four sand) infoundation and plinth including curing complete and carriage of material within all leads , lifts and other incidental.The rate includes octori, royality, malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government..

Applying cement slurry on RCC slab or cement concrete work using 2.75 kg. two point seventy five kilogramme of cement per square metre of floor area before laying cement concrete flooring including roughening cleaning of the concrete surface complete including carriage of material within all leads , lifts and other incidental.The rate includes octroi, royality, malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing anodized aluminium work for doors, windows, ventilators and partitions with make of Hindalco, Jindal, Indian Aluminium co. extruded built up standard tubular and other sections of approved make confirming to IS-733 and IS-1285 anodized transparent or dyed to required shade according to IS- 1868(minimum anodic coating of grade AC 15) fixed with rawl plugs and screws or with fixing clips or with expansion hold fasteners including necessary filling up of gaps at junctions and top and bottom, sides with required PVC/neoprene felt etcetera Aluminium sections shall be smooth, rust free, straight mitered and jointed mechanically where ever required including cleat angle, aluminium snap beading for glazing/ paneling, C.P. brass stainless steel screws complete as per architectural drawing and the directions of Engineer-in-Charge for: a)Door,windows and ventilators and glazed partitions frames including entire carriage of material within all leads and lifts and other incidentials .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing anodised aluminium work make of Hindalco, Jindal Indian Aluminium co. for door,windows, ventilators and partitions with extruded builtup standard tubular and other sections of approved make conforming to IS:733 and IS 1285 anodised transparent or dyed to required shade according to IS 1868(Minimum anodic coating of grade AC 15) fixed with rawl plugs and screws or with fixing clips or expansion hold fastness including necessary filling up of gaps at junctions , at top bottom and sides with required PVC/ neoprene Felt etctra. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleast angles, aluminium snap beading for glazing/ panelling CP brass/ stainess steel screws complete as per architectural drawings and Engineer-in-charge for shutters of door windows and ventilatotors including providing and fixing hinges /pivots and making provisions for fixing of fittings, wherever required including the cost of PVC/neoprene gaskets as required including entire carriage of material within all leads , lifts and other incidentals. The rates are inclusive includes octroi, royality,malkhana ,toll tax,sale tax, GST,labour cess or other taxes imposed by the Government

Providing and fixing glazing in aluminium door,windows , ventilator shutters and partitions etcetera with PVC/neoprens gasket etcetera complete as per the architectural drawing and directons of Engineer-in-charge glazing withglassd panes of 4mm(four millimetre) thickness (weight not less than 10.00kg(Ten kilogramme)(square metre) including entire carriage of material within all leads , lifts and other incidental. The rates are inclusive octroi, royality,malkhana ,toll tax,sale tax, GST,labour cess or other taxes imposed by the Government

Providing and fixing 12mm(twelve Millimetre) thick prelaminated board both side bwp phenol bonded exterior/interior grade shutters with frameof for cup board including nickel plated bright finished piano hinges 25mm (twenty five miliimetre thick frame .including carriage of material with in all leads and lifts and other incidentals The rate includes octroi, royality, malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government

Providing and fixing anodized aluminium sliding door bolts anodized colour or shade with bolts and nuts screws etc complete including carriage of material within all leads , lifts and other incidental.The rate includes octroi, royality, malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government. i)300×16mm(three hundred into sixteen millimetre)

Providing and fixing anodized aluminium sliding door bolts anodized colour or shade with bolts and nuts screws etc complete including carriage of material within all leads , lifts and other incidental.The rate includes octroi, royality, malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government. i)250×16mm(two hundred fifty into sixteen millimetre)

Providing and fixing anodized aluminium tower bolts (barrel type )anodized colour or shade with bolts and nuts screws etc complete including carriage of material within all leads , lifts and other incidental.The rate includes octroi, royality, malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government. i)250×10mm(two hundred into ten millimetre)

Providing and fixing anodized aluminium tower bolts (barrel type )anodized colour or shade with bolts and nuts screws etc complete including carriage of material within all leads , lifts and other incidental.The rate includes octroi, royality, malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government. i)200×10mm(two hundred into ten millimetre)

Providing and fixing aluminum handles anodized transparent or dyed to required colour and shade with necessary screws etc.including carriage of material with in all leads and lifts and other incidentals The rate includes octroi, royality, malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government. (a)125mm(one hundred twenty five millimetre)

Providing and fixing aluminum handles anodized transparent or dyed to required colour and shade with necessary screws etc.including carriage of material with in all leads and lifts and other incidentalsThe rate includes octroi, royality, malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government. (a)100mm(one hundred millimetre

Providing and fixing aluminum handles anodized transparent or dyed to required colour and shade with necessary screws etc.including carriage of material with in all leads and lifts and other incidentalsThe rate includes octroi, royality, malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government. (a)75mm(seventy five millimetre)

Providing and fixing hydraulic door closure ISI marked with necessary screws etc.including carriage of material with in all leads and lifts and other incidentals.The rate includes octroi, royality, malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing 100mm( One hundred millimetre)bright finished brass door stopper with rubber cushion screws etcetra to suit shutter thickness complete including carriage of material within all leads , lifts and other incidental.The rate includes octroi, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government

Providing and fixing oxidized MS hooks and eyes 200mm( Two hundred millimetre)size including carriage of material within all leads , lifts and other incidental.The rate includes octroi, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing MS grill of required pattren in wooden frame of window with MS flats, square or round bars with round headed headed bolts and nuts or by screws including welding with frames complete in all respect(Plain grills) including carriage of material within all leads and lifts.The rate includes octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing 12mm thick (twelve millimetre ) thick and 100mm (hundred millimetre )wide pelmet with 25mm (twenty five millimetre )dia wooden curtain rod and brackets including fixing with 25x3mm ( twenty five into three millimetre ) M.S. flat 10cm. Long and plugs etc. complete including carriage of material within all leads , lifts and other incidental The rate includes octroi, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government

Providing and fixing 150mm ( one hundred fifty millimetre ) M.S. double acting spring hinges bright finished with rubber cushion screws etc. to suit shutter thickness complete ncluding carriage of materials within all leads , lifts and other incidentials .The rate includes octroi, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government

Providing and fixing 10mm(ten millimetre) thick anti skid water proof stain and impact resistent heavy duty vetrified tiles Nitco /Kajaria (600x600x10mm)(six hundred into six hundred into ten millimetre)manufactured of approved shade and colour in flooring treads of steps and landing laid on a bed of 12mm(twelve millimetre) thick cement mortor 1:3( one cement: three sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment to match the shade of tiles as required complete iincluding carriage of materials within all leads and lifts and other incidentals.The rate includes octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government.

Providing and laying red sand stone slab flooring 40mm(forty millimetre) average thick on 20mm average thick base of Cement morter 1:4 (one cement:four sand)laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and granite polish finish complete including carriage of material within all leads , lifts and other incidental.The rate includes octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government.

Providing and laying granite stone in flooring 20mm(twenty millimetre ) (average) thickness base of cement mortar 1:3(1cement:3 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of granite stone including rubbing and polishing complete. 20mm (twenty millimetre ) thick including carriage of material with in all leads and lifts and other incidentals The rate includes octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government.

Extra for making moulded nosing in terrazoo including returned moulded ends and angles to mouldings including carriage of material within all leads , lifts and other incidental.The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government.

Providing and laying non slippery spartic ceramic tiles 300mmx300mmx 5.5 mm ( three hundred into three hundred into five point five millimetre )thick treads of step laid on bed of 12mm (twelve millimetre ) thick cement mortar 1:3 (one cement :three sand ) and jointing with neat cement slurry including carriage of material within all leads and lifts and other incidentals.The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government.

White glazed tiles 200x200x6mm(two hundred into two hundred into six millimetre ) thick or 200mmx150mmx6mm (two hundred into one hundred fifty into six millimetre ) thick in skirting risers of steps and dado 12mm thick cement mortor 1:3 ( one cement: three sand) and jointed with neat cement slurry including carriage of material within all leads and lifts and other incidentials. The rate includes octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing 100mm(one hundred millimeter) dia on wall face PVC (D-plast) supreme, AKG, Finolex, Prince Kisan, SFMC make rain water pipe of working pressure not less than 4.5 kg (four point five kilogramme)per square centimeter including filling the joints with approved adhesive complete including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,GST,labour cess or other taxes imposed by the Government. .

Providing and fixing 100mm (one hundred millimetre )dia M.S. holder bat clamps of approved design to PVC pipes embedded in and including cement concrete blocks 10 x10x 10 cm of 1:2:4 mix (one cement: two sand: four graded crushed stone aggregate 20mm ( twenty millimetre ) nominal size) and cost of cutting holes and making good the wall etcincluding carriage of material with in all leads and lifts and other incidentals .The rates are inclusive octroi, royality,malkana ,toll tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing on wall faces PVC (D-plast)supreme, AKG, Finolex, Prince Kisan, SFMC make accessories for rain water pipes including filling the joints with approved adhesive complete PVC plain bend 150mm ( one hundred fifty millimeter) dia including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,GST,labour cess or other taxes imposed by the Government. .

Providing and fixing on wall faces PVC (D-plast)supreme, AKG, Finolex, Prince Kisan, SFMC make accessories for rain water pipes including filling the joints with approved adhesive complete PVC concrete type bend 150mm ( one hundred fifty millimeter) dia including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,GST,labour cess or other taxes imposed by the Government. .

Providing and fixing on wall faces PVC (D-plast)supreme, AKG, Finolex, Prince Kisan, SFMC make accessories for rain water pipes including filling the joints with approved adhesive complete PVC plain shoe 150mm ( one hundred fifty millimeter) dia including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,GST,labour cess or other taxes imposed by the Government. .

Providing and fixing M.S.fan clamp type -1 of 16 mm(sixteen millimetre) dia M.S. bar bent to shape with hooked ends in R.C.C slab during laying including painting the exposed portion of loop,all as per standard design complete.

Providing and fixing pre painted steel sheet (Tata Durashine make) in roofing over all steel trusses providing and fixing with hot applied metallic zinc coated Kolar Metal or its equivalent pre painted single skin trapezoidal profile sheeting 0.60mm (zero point six zero millimetres) thickness having 1060 mm (one thousand sixty millimeter) cover width, overall width 1126mm (one thousand one hundred twenty six millimetre), 28mm (twenty eight millimetres) crest depth at 353+2mm (three hundred fifty three plus two millimetre) centre to centre crest distance, having two ribs at the centre for stiffening having crest depth of 2.5mm (two point five millimeters). The main crest width at top of 25mm (twenty five millimetre) and at lower 81mm (eighty one millimetres) base metal of cold rolled steel coil with zinc coating. Top coating with regular modified polyester (RMP) organic coating of 20 (twenty) microns over 5 (five) microns primer coating to back coat of polyster 5 (five) microns over 5 (five) microns primer coating including fixing with self tapping screws 5.5mm (five point five millimeter) dia and 5.5cm (five point five centimeter) length with as required with EPDM seal complete up to all floor level /height including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. .

Providing and fixing pre painted steel(Tata Durashine make)sheet in ridges having proper Gola of plain prepainted or hips 60cm (sixty centimetre) overall with hot dipped metallic zinc coated, Kolar Metal or its equivalent make over steel section, pre painted single skin trapezoidal profile sheeting 0.60mm (zero point six zero millimeters) thickness having 1060 mm (one thousand sixty millimetre) cover width, overall width 1126mm (one thousand one hundred twenty six millimetre), 28mm (twenty eight millimetre) crest depth at 353+2mm (three hundred fifty three plus two millimetre) centre to centre crest distance, having two ribs at the centre for stiffening having crest depth of 2.5mm (two point five millimetre). The main crest width at top of 25mm (twenty five millimeters) and at lower 81mm (eighty one millimetre) base metal of cold rolled steel coil with zinc coating. Top coating with regular modified polyster (RMP) organic coating of 20 (twenty) microns over 5 (five) microns primer coating to back coat of 5 (five) microns over 5 polyster (five) microns primer coating including fixing with self tapping screws 5.5mm (five point five millimeter) dia and 5.5cm (five point five centimeter) length complete with all accessories as required with EPDM seal complete up to all floor level/height including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. .

Providing and fixing Valleys 90cm (ninety centimeter) overall with hot dipped metallic zinc coated, Kolar Metal or its equivalent make over steel section, pre painted single skin trapezoidal profile sheeting 0.60 mm (zero point six zero millimeters) thickness having 1060mm (one thousand sixty millimeters) cover width, overall width 1126mm (one thousand one hundred twenty six millimeters), 28mm (twenty eight millimeters) crest depth at 353+2mm (three hundred fifty three plus two millimeters) centre to centre crest distance, having two ribs at the centre for stiffening having crest depth of 2.5mm (two point five millimeters). The main crest width at top of 25mm (twenty five millimeters) and at lower 81mm (eighty one millimeters) base metal of cold rolled steel coil with zinc coating. Top coating with regular modified polyster (RMP) organic coating of 20 (twenty) microns over 5 (five) microns primer coating of polyester to back coat of 5 (five) microns over 5 (five) microns primer coating including fixing with self tapping screws 5.5mm (five point five millimeter) dia and 5.5cm (five point five centimeter) length complete with all accessories are required with EDPM seal complete as per HPPWD specifications or as directed by the Engineer-in-Charge, up to all floor level, including carriage of materials within all leads, lifts, and other incidental. The rate including Octroi, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing fixing 25cm.(twenty five centimetre)wide 65cm(sixty five centimetre) Overall semicircular plain GI sheet gutter with iron brackets 40mmx3mm(forty millimetre into three millimetre) size bolt and nuts and washers etc. including making necessary connections with rain water pipe complete as per design 0.63mm(zero point sixty three millimetre) thick sheet including carriage of materials within all leads and lifts and other incidentals.The rate includes octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government.

Steel work welded in built up sections, trusses and framed work including cutting, hoisting, fixing in position and applying a priming coat of red lead paint complete in all respect in trusses and trussed purlins in buildings in all height including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. .

Providing and laying brick tiles over mumty roofs grouted with cement Mortar 1:3(One cement:three sand) over a 12mm (twelve millimetre ) thick layer of cement mortar 1:3 (One cement:three sand)and finished neat .including carriage of material with in all leads and lifts and other incidentals The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. .

Providing and fixing 50mm (fifty millimetre ) dia pipe hand rail slip resistant with round end at two level i.e. 75cm (seventy five centimetre ) and 90cm (Ninety centimetre ) height and extended 30cm ( thirty centimetre ) beyond the top and bottom of the ramp and 25mm dia (twenty five millimetre ) dia MS pipe embedded in cement concrete 1:3:6(one cement :three sand :six graded stone aggregate 20mm nominal size )including carriage of material with in all leads and lifts and other incidentals The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

6mm (six millimetre)Cement plaster to ceiling in all floor level in Cement mortar 1:3(One Cement:three Sand) including curing and carriage of material with in all leads and lifts and other incidentals .The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government..

15mm (fifteen millimetre)cement plaster in single coat on rough side of brick/concrete/stone walls for interior plastering in all floor level/height including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm(eighty millimeter) in girth and finished even and smooth in cement mortar 1:6 ( one cement : six sand) including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

15mm cement plaster in single coat on fair side of brick/concrete/stone walls for interior plastering upto any floor level/height including arrises, internal rounded angle, chamfers and/or rounded angles not exceeding 80mm (eighty millimeter)in girth and finished even and smooth in cement mortar 1:6 (1 cement : 6 sand) including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Applying priming coat over new steel and other metal surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and scoured with wire brushes fine steel wool scrapers and sand papering complete including carriage of materials within all leads and lifts :With ready mixed priming paint brushing red lead, red oxide / zinc oxide chrome make of ISI Nerloac, Berger, Asian opaints, shalimar including carriage of materials within all leads and lifts. The rate includes octroi, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government.

Painting two coats (excluding priming coat) on new steel and other metal surfaces with enamel paint brushing to give an even shade including cleaning the surface of all dirt, dust and other foreign matter including carriage of materials within all leads and lifts. The rate includes octroi, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government. Enamel paint other than white ICI(Dulux Gloss) Nerolac, Berger(Luxor High Gloss) Asian Paints(Premium Apcolite Gloss) shalimar

Applying (JK wall Putty/ Birla white putty )over plaster surface after thoroughly brushing the surface free from mortar dropping dust loose materials and other foreign matter sand papered smooth to give final finish to the surface complete upto all floor level/height including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Applying priming coat over new concrete / masonry / asbestos / cement / plastered surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter sand papering as required with Ready mixed primer including carriage of material with in all leads and lifts and other incidentials The rate includes octroi, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government.

Wall painting (two coat) with acrylic emulsion paint of approved brand and manufacture for interior grade an undecorated wall concrete /stone/ plastered wall surface give an even shade including thoroughly brushing the surface to free from mortar droppings and other foreign matte and sand papered smooth applying of putty a required for metling the surface of Nerolac, Berger(Bison Acrylic) Asian paints(Tractor Acrylic) shalimar make complete in all respect including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima) or its equivalent on undecorated will surface (two coats) to give an even shade and final finish after thoroughly cleaning the surfaces to remove all dirt dust and other foreign matter etcetera including sand papered smooth surface of ICI(Dulux Gloss) Nerolac, Berger(Luxor High Gloss) Asian Paints(Premium AP colite Gloss) shalimar make complete in all respect including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing under layer for plinth protection of 75mm(seventy five millimeter) thick (unconsolidated) bed or dry brick/stone aggregate 40mm(forty millimeter) nominal size well rammed and consolidated and grouted with fine sand including preparation of ground including carriage of material within all leads , lifts and other incidental.The rate includes octroi, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government.

Constructing Course rubble hammer dressed 'U' shape open surface drain with side wall.15x22 cm (fifteen into twenty two centimetre ) in cement mortar 1:6 (one Cement : six Sand) and inside plastring with cement plaster 1:3 (one Cement:six Sand) including earth work and laying 10 cm ( ten centimetre ) cement concrete in 1:5:10 (one Cement : five Sand: ten graded stone aggregate) of :40 mm(forty millimetre ) nominal size and 7.5 cm (seven point five centimetre ) cement concrete 1:2:4 (One Cement : Two Sand : Four Graded stone aggregate of 20 mm(twenty millimetre ) nominal size and finished with a floating coat of neat cement complete as per standard design.40 mm (forty millimetre )thick including black enamelled M.S. butt hinges including carriage of material with in all leads and lifts and other incidentals .The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government..

Excavation in drains and channels etcetra in all kind of earth work such as spade work pick work, jumper work, pick jumper work, blasting work and hard blasting work chiselling /wedging rock etc. including dressing of side and bed and disposing of excavated earth upto any leads disposed earth to be levelled and neatly dressed including carriage of material within all leads and lifts and other incidental .

Providing and laying in trenches galvanised mild steel tube (Medium grade ) tube fitting (earth work in trenches to be measured and paid for separately ) including carriage of material within all leads and lifts. 20mm (twenty millimetre ) nominal bore

Providing and fixing to wall ceiling floor galvanised mild steel tubes (Medium grade) tube fittings and clamps(Medium grade) tube fitting and clamps including making good the wall ceiling and floor including carriage of material within all leads and lifts and other incidentals.The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government . i)20mm (twenty millimetre ) nominal bore

15mm (fifteen millimetre ) nominal bore

Making connection of galvanised steel branch with galvanised mild steel main 20mm nominal bore (twenty millimetre nominal ) by providing and fixing tee including cutting and approved adhesive complete including carriage of material within all leads and lifts and other incidentals.The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing PVC water storage tank ISI marked of approved brand and make (Sintex ) with 40mm (forty milimetre nominal bore galvanised mild steel scour tube with fitting, 25mm(twenty five milimetre) nominal bore galvanised mild steel over flow tube with fittings and mosquito proof coupling of approved municipal design 15mm (fifteen milimetre) nominal bore ball valve and cover with locking arrangement providing pads of required sizes for inlet and outlet etcetera . complete including hoisting at roof level height 1000 litres (one thousand)net capacity tank complete in all respect including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale taxGST,labour cess or other taxes imposed by the Government.

Providing and fixing high pressure PVC spigot and socket waste and ventilating pipes Finolex make and fixing with the approved adhesive etcetera complete Type-B and material shall be accompnied by a test complete certifying the quality of materiaI IS No.diamentions and warrenty including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax GST,labour cess or other taxes imposed by the Government. i)150mm ( one hundred fifty millimetre nominal size )

110mm ( one hundred ten millimetre nominal size )

Providing and fixing PVC single equal branch with oval access door Finolex make (High Pressure) insertion rubber washer 3mm(three millimetre) thick bolts and nuts complete including fixing with approved adhesive etcetra complete including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government i).110mm ( one hundred ten millimetre nominal size )

Providing and fixing PVC door bend with oval access door, insertion rubber washer 3mm(three millimeter) thick bolts and nuts Finolex make(High Pressure) complete including fixing with approved adhesive etcetera complete including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. i) 110mm ( one hundred ten millimetre nominal size )

Providing and fixing PVC single equal branch plain ISI marked complete including fixing with approved adhesive etcetra including carriage of material within all leads and lifts and other incidentals. i) 110mm ( one hundred ten millimetre nominal size ) i) 110mm ( one hundred ten millimetre nominal size )

Providing and fixing PVC collars ISI marked including fixing with approved adhesive etcetera Complete , Finolex make (High Pressure) including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. i) 150mm (One hundred fifty millimetre nominal size )

110mm ( one hundred ten millimetre nominal size )

Providing and fixing PVC plain bend ISI marked including fixing with approved adhesive etcetera complete Finolex make (High Pressure) including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. i) 110mm ( one hundred ten millimetre nominal size )

Providing and fixing PVC stay and clamps ISI marked of approved design with steel screws and rawl plugs etcetera complete Finolex Make(High Pressure)including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government. i).110mm dia ( one hundred ten millimetre nominal size )

Providing and fixing PVC floor trap Finolex mak of self cleaning design including fixing with approved adhesive , cost of cutting and making good the wall and floors etcetera complete including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax GST,labour cess or other taxes imposed by the Government. i)110mm x90mm ( one hundred ten millimetre into ninety millimetre nominal size )

Providing and fixing P or S trap for water closet ( squatting pan )make of Parryware, Hindware, Sanitaryware, Neycer, Cera including jointing the trap with the pan and soil pipe in cement mortor 1:1(one cement:one sand) sand cast iron complete in all respect including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax GST,labour cess or other taxes imposed by the Government. i) 150mm dia (One hundred fifty millimetre nominal size )

Providing and fixing PVC Cowl Finolex Make(High Pressure)complete including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government i)150mm dia (One hundred fifty millimetre nominal size )

110mm ( one hundred ten millimetre nominal size )

Providing and fixing vitreous china wash down, water closet squatting pan make of Parryware, Hindware, Sanitaryware, Neycer, Cera (Indian type WC pan ) size 580mm (five hundred eighty millimetre) (earth work, bed concrete ,foot rest and trap to be measured and paid for separately) (Orissa pan WC No. 2004 size 58x40mm (fifty eight into forty millimetre) in white shade including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing vitreous China wash down water closet (European type W.C. Pan)Cat No.92070 of Hindware or cera with integral P or S trap i/c jointing the trap with soil pipe in cement mortar 1:1 ( one cement : one sand) seat and cover to be measured and paid for separately EWC closet Cat No.92070 (i) Ordinary closet including carriage of material in all leads and lifts and other incidentals.The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government..

Providing and fixing vitreous China wash down water closet (European type W.C. Pan)Cat No.92070 of Hindware or cera with integral P or S trap i/c jointing the trap with soil pipe in cement mortar 1:1 ( one cement : one sand) seat and cover to be measured and paid for separately EWC closet Cat No.92070 (i) Anglo Indian universal closet including carriage of material in all leads and lifts and other incidentals.The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government..

Providing and fixing 10.0 litres PVC low level duel flushing cistern with pair of CI or MS brackets complete with ball valve with as lead valve less siphon 15mm(fifteen millimeter) nominal size brass ball valve with polythene float CP brass handles union and coupling for connection with inlet outlet and overflow pipes 40mm(forty millimeter) diameter CP flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet ( over flow ) pipe to be measured and paid for separately Cera or its equivalent low level hard cistern with dual flushing system No. 502 ( 10 ltr. capacity ) ISI marked No. 7231 of prayag sanitary Hindware of its equivalent including carriage of material with in all leads and lifts and other incidentals.

Providing and fixing G.I. inlet connection for flush pipe with WC pan. including carriage of material with in all leads and lifts and other incidentals

Providing and fixing plastic seat (solid /Jollow type ) and cover for wash down waster closet with CP brass hinges and rubber buffers including carriage of material with in all leads and lifts and other incidentals White plastic seat and cover .

Providing and fixing first quality of white shade vitreous china bowl pattern urinal including connecting the urinal with waste plipe by mean of white lead mixed with chopped hamp ( waste pipe to be measured and paid for seperatety flat back 550mmx400mm No. 1025 without pedestal of Cera or its equivalent.including carriage of material with in all leads and lifts and other incidentals

Providing and fixing 10 litres capacity automatic flushing cistern with fittings with a pair of C.I.or M.S. brackets complete with a pair of C.I.or M.S. bracket complete with fitting including C.I. syphonic apparatus mosquito proof lid CP brass union and coupling for connections with inlet outlet and over flow pipes including cutting holes and making good the same ( overflow pipe to be measured and paid for separately ) including carriage of material with in all leads and lifts and other incidentals

Providing and fixing 15mm (fifteen millimetre) nominal bore CP brass flush pipe / spraders for urinal with firttings such as unions, clamps etc. (all C.P.) including cutting holes and making good the same including including carriage of material with in all leads and lifts and other incidentals.

Providing and fixing vitreous china wash basin with single hole for pillar tap with CI or MS brackets painted white including cutting holes and making good the same but excluding fittings flat back 550mmx400mm (five hundred fifty into four hundred millimetre) No. 1001of hindware Parrayware sanitary wars , Neycer, Cera in white shade including carriage of material with in all leads and lifts and other incidentals .The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing stainless steel kitchen sink of approved standard ISI make with drain board and C.P waste with C.I or MS brackets painted white including cutting holes and making good the same but excluding fitting 470x420mm(four hundred seventy into four hundred twenty millimetre ) with bowl depth 178mm(one hundred seventy eight millimeter) of cera or its equavalent including carriage of material with in all leads and lifts and other incidentals

Providing and fixing vitreous china pedestal of Hindware for wash basin complete recessed at the back for the reception pipes and fittings including carriage of material within all leads and lifts and other incidentals.

Providing and fixing 32mm (thirty two millimetre)dia M.I. union for wash basin or sink including carriage of material with in all leads and lifts and other incidentals.

Providing and fixing 32mm (thirty two millimetre)dia CP brass waste (heavy duty ) make of Kingstar Gem, Parko, Teehro, JAL, ESS, JAGUAR, Seiko for wash basin or sink complete in all respect including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax, GST,labour cess or other taxes imposed by the Government.

Providing and fixing 100mm (one hundred millimeter) dia CP grating of superior quality for floor ,gully or Nahani trap Pryag or Jaguar make including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing 15mm (fifteen millimetre)dia Galvanised mild steel puff pipe 1 m ( one metre ) long with brass perforated cap including carriage of material with in all leads and lifts and other incidentals.

Providing and fixing 600mm x 450 mm(six hundred milimetre into four hundred fifty millimeter) bevelled edge mirror of superior glass mounted on 6mm (six milimeter) thick A.C. sheet or plastic sheet and fixed to plastic plugs with CP brass screws and washers make of Atul, Modiguard, Golden Fish complete in all respect including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax, GST,labour cess or other taxes imposed by the Government.

Providing and fixing CP brass towel rail (heavy duty ISI marked IS:8931 & 8934) complete with CP brass brackets fixed to wooden ;plugs with CP brass screws 600mm x 20mm (six hundred milimetre into twenty millimetre) size of Kingston, Gem, Parko, Teelino, JAL, ESS, JAGUAR, SEIKO complete in all respect including carriage of material within all leads and lifts and other incidentals.

Providing and fixing 600mmx120mm(six hundred into one hundred twenty millieter) glass shelf with CP brass brackets and guard rail fixed to wooden plugs with CP brass screw of Kingston , Gem, Parko, Techno, Jal, ESS, Jaguar, Seiko make complete in all respect including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government

Providing and fixing CP brass toilet paper holder make of Jaguar,Kingston, Gem, Parko, Techno,Jal,ESS.Seiko complete in all respect including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing liquid soap container with C.P. Brass lid and brackets fixed to wooden plugs with C.P. Brass screws Plastic container including carriage of material within all leads and lifts and other incidentals.

Providing and fixing chromium plated brass soap dish with CP brass brackets make of kingston, Gem, Parko, Teehro, Jal, ESS, Jaguar, seiko fixed to wooden cleats with CP brass screws complete in all respect including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing vitreous china division plate of Parry ware, Hundware, sanitary ware, Neycer, Cera make for urinal size 700x340mm(seven hundred into three hundred forty millimetres) including carriage of material with in all leads and lifts and other incidentals.

Providing and fixing CP brass bib tap with capstan head 15mm (fifteen millimetre) dia ISI marked IS: 8931 & 8934) of jaquar/jal make or its equavalent including carriage of material with in all leads and lifts and other incidentals.

Providing and fixing 15mm(fifteen millimeter) dia CP brass pillar tap with capstan head ESS, Jaguar kingston , Gem, Parko, Techno, Jal, Seiko make including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing 15mm(fifteen millimetre) dia C.P. stop cock of Jaguar heavy duty ISI marked IS:8931 & 8934)including carriage of material within all leads and lifts and other incidentals.

Providing and fixing C.P. brass angle valve15mm(fifteen millimetre) without Nuts and pipe including carriage of material with in all leads and lifts and other incidentals.

Providing and fixing PVC connection pipe with brass union 45cms.(forty five centimeter) Length 15mm nominal bore (fifteen millimetres) Finolex make complete in all respect including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing 15mm(fifteen millimeter) nominal bore brass ball way valve (horizental plunger type) high pressure with polythene plastic floats IVC, leader, Prayag make complete in all respect including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Providing and fixing 20mmx15mm(twenty millimetre into fifteen millimetre ) PTMT push cock of Prayag with reducer of approved quality and colour including carriage of material within all leads and lifts and other incidentals.

Providing and fixing ZET spray faucet of valve core material of stainless steel wall mounted and 1.00 meter (one meter) length compact within all accessories make of Cera/ Jaguar/hindware including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusive octroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by the Government.

Construction manhole with RCC top slab in 1:2:4 mix in stone agg. 20mm nominal size foundation concrete 1:4:8 ( 1 cement :4sand:8 graded stone agg. 40mm nominal size ) inside plastering 15mm(fifteen)millimetre thick with cement mortar 1:3 finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 mix(one cement : two sand :four graded stone agg. 20mm nominal size finished smooth complete including curing and testing including carriage of material with in all leads and lifts and other incidentals . Inside size 800mmx800mm and500mm deep including C.I cover with frame (light duty single seal pattern -I) 455mmx610mm internal dimensions total weight of cover and frame to be not less than 38 kg. (weight of cover 23( twenty three) kg and weight of frame 15 kg.(fifteen ) )With 200mm thick walls of brick masonry using common burnt clay building bricks in cement mortar 1:3 ( 1 cement : 3sand) including carriage of material with in all leads and lifts and other incidentals

i) Inside size 800mm x 800 mm x1000 mm (eight hundred millimeter x eight hundred millimeter x One thousand millimeter) deep including C I cover with frame (Light duty single seal pattern I) 455mm x 610 mm (four hundred fifty five milimetre into six hundred ten millimeter) internal dimensions total weight of cover and frame to be not less than 38 kg (thirty eight kilograms) weight of cover 23 kg (twenty three kilogram) and weight of frame 15 kg (fifteen kilogram) with 200mm (two hundred millimeter) thick brick walls of masonry using common burnt clay building bricks in cement mortar 1:3(one cement: three sand ) and curing complete including carriage of material within all leads and lifts and other incidentals.The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government..

Supplying in cast iron cover without frame for man holes i) For frame of internal diamension 455x610mm (four hundred fifty five into six hundred ten millimetre ) rectangular CI cover( light duty single seat ( pattern-I) the weight of cover to be not less than 23kg. (twenty three killogramme) including carriage of material with in all leads and lifts and other incidentals

ii)For frame of 500mm(five hundred millimetre) internal diametre CI cover(medium duty) the weight of cover to be not less than 58kg(fifty eight kilogramme).The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government..

Providing and fixing grab bars in handicaped toilet of CP 40mm(forty millimetre) dia steel pipes 78cm(seventy eight centimetres) height welded with MS plate as per detail and position of WC seat including carriage of material within all leads and lifts and other incidentals..The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by the Government..

Arun Kumar

M/S BEETAN ENTERPRISEZ

SATWINDER SINGH