Annual Repair and Maintenance of Civil work at Nahargarh Fort, Jaipur

Carriage of Building Rubbish Stone Metal grit ballast etc.with a lead of 10 Kms.(G-4.1/4.2)

Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. M15 grade Nominal Mix 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size).(B-3/3.1.2).

Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. M10 grade Nominal Mix 1: 3: 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). (B-3/3.1.4)

Random Rubble stone masonry for superstructure above plinth level one storey height above 30cm. thick walls in : Cement Mortar 1:6 ( 1-Cement : 6-Sand).(B-6/6.2.6)

Supplying and fixing stone lintels/bed plates of approved quarry rough dressed in cement mortar 1:4 :Upto 15 cm. thick. (B-6/6.18.1)

Providing and fixing 1st quality standard white, grey, ivory, fume red brown, light green, light blue and other light shades ceramic glazed vitrified tiles with water absortion less than or equal to 0.08% confirming to IS:13753 & IS : 15622 on walls, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar). Size 600mm x 1200mm

Providing and fixing 1st quality MAT finished ceremic tile size 300x300mm comfirming to IS : 13755 and IS 15622 colour such as white, grey, ivory, fume red brown, light green, light blue and other light shades in floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed 1:4) (B-7/7.13)

Providing & fixing door, window, chowkhats and other frames, including antitermite treatment, M.S. flat, hold fasts of size 250 x 40 x 3mm fixed with M.S. bolt 5mm dia 50mm long duly embedded in cement concrete M-15 grade :Ghana teak wood Grade - I. (B-8/8.1.5)

Providing and fixing IS : 3564 marked aluminium extruded section body tubular type universal hydraulic door closer with double speed adjustment with necessary accessories and screws etc. complete.(B-8/8.26)

Providing and fixing steel gate, grating and grills made of angles, tees, square bars, flats,or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide (B-9/9.8)

Providing and applying Melamine polish on teak wood work of approved brand and manufacture to give an even shade with two or more coats by compressor including sand papering, wood filler coat etc complete in all respect:

New Surface

Old Surface

Renewing glass panes with wooden fillets wherever necessary:

(a) 4mm thick plain glass panes.(B-13/13.4.1).

Providing and fixing in CM 1 : 4 double paitam (rebated) stone door window and ventilator frames of approved quarry :Size 125 x 100mm(B-15/15.25.2)

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade including all scaffolding: Two or more coats on new work including prepartion of base with primer, putty, lippy etc complete in all respect.(12.40.1 )

Providing and Applying ACRYLIC emulsion polymer waterproofing chemical coating, on over roof on over roof slabs/terrace/balconies/parapet wall etc.with following method/specification: Paint the surface with regular paint brush so as to obtain approximately 0.3mm thickness coating. apply the 2nd coat next day at right angles to the 1st coat so that total thickness of the coating should be approximately 0.6mm coverage by using above formulation will be 40 ft2/ litre of chemical. painted surface does not require any external water curing since chemical will hold sufficient water for curing.After the primer coat Apply 2 coats of modified acrylic emulsion polymer water proofing compound having solar heat reduction properties coating @ 0.330 KG/SQM on the surface of the interval of 3-4 hours. Undulation on the surface is repair before the waterproofing work.

Supply of Labour as per requirment with required Tools & plants

(a) Mason (for plain stone work) 2nd class(Code no.125)

(b) Beldar(Code no.114)

(c) Fitter (grade 1)(Code no.116)

(d) Carpenter 1st class(Code no.111)

Percentage BoQ

BoQ_Ver3.0

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE Part- B Based on PWD BSR 2022 (Sanitary Works) (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes (IS 15778 : 2007 code) having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. (Concealed work including cutting chases and making good the walls etc.,)

20mm nominal size

25 mm nominal size

P & F Pilllar Cocks (IS :8931 : 1993 Mark) of superior quality and approved make:C.P. Pillar cock, high-neck, 15 mm nominal bore.(2.6.5)

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes (IS 15778 : 2007 code) having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings, this included jointing of pipes & fittings with one step CPVC solvent cement , trenching refilling & testing of joints complete as per direction of Engineer in Charge. (External work).

50 mm nominal size

P&F rigid PVC Pipe (IS:4985 mark) class II/ (4 Kg. /Cm2.) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant.

(a) 110 mm dia(S-3/3.16.3)

P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant:

(a) Coupler (socket) - 110mm dia(S-3/3.17.1(ii))

(b) Plain Tee - 110mm dia(S-3/3.17.3(ii))

(c) Bend 87.5 - 110mm dia(S-3/3.17.9(ii))

(d) Door Bend (Top Side) - 110mm dia(S-3/3.17.10(ii))

Supplying and fixing Ferro- cement cover with C.I. frame for chambers & man holes of size.

(a) 500mm dia 25 Kg.-do-70 MT centre point load seal type (Heavy duty.)(S-3/3.32.4)

(b) Rectangular shape 600 x 450 mm, to withstand 3 MT center point load & minimum unfractured load of 1 MT. (Light duty).(S-3/3.32.5)

P & F PVC Storage Tank ISI Marked (IS : 12701) indicating the BIS license No), of approved make with cover, 25mm dia 1M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc., complete of approved design: 500 litres capacity.(S-2/2.26.3)

P & F White Vitreous China Double Syphonic European W.C. (I.S:2556Mark) with mounted W.V.C. flushing cistern of (IS : 2556 Mark) of 10 litre capacity complete with all necessary internal fittings including cutting and making good the wall and floor.

P & F Premium quality Low level Flushing Cistern of 10 litres capacity (IS:2556 mark) of approved make as per Engineer-in-charge with complete fittings C.I. brackets duly painted, brass ball cock with ball, (IS:1703 mark) complete including cutting and making good the wall :

Percentage BoQ

BoQ_Ver3.0

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE Part- C Based on RUIDP SOR 2023 (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

Lime Surkhi Plaster 1:2 (1 Lime : 2 Surkhi) including preparation of mortar by traditional practice (by grinding) in coarse for base coarse and subsequent coarse & Loi, tamping, beating, curring till the shrinkage cracks are disappear. The work is to be done with all lead as the work of restoration nature as per Jaipur practice including adding, gur, methi & gugal, on old walls including removal of all old loose and decayed plaster, each coat to be done after 3 days of previous coat. (a) 33 mm thick in four coats(C-3/3.1.1)

Deduct for plaster work if lime kara applying on plaster as finishing coat. 40.11

Araish plaster (as per Jaipur practice) 1:2 ( 1 lime : 2 Zikki) on lime plaster or plane back ground including preparation of lime for 6 months by slaking of lime with curd and changing the water every week. The Kara plaster of not more than 6mm thick is to be left the maximum of 3 months to appear the shrinkage & temperature cracks. Over the Kara plaster 2mm layer of grinded lime putty is to be done and is to be rubbed Gently by Akik stone. Then adding Khoppra & Ghee and inserting the design of colour boarder all round. (40.15)

Coloured plain Araish work 1:2 (1 lime : 2 zikki) on lime plaster or plane back ground including preparation of lime for 6 months by slaking of lime with curd and changing the water every week. The Kara plaster of not more than 6mm thick is to be left the maximum of 3 months to appear the shrinkage & temperature cracks. Over the Kara plaster 2mm layer of grinded lime putty is to be done and is to be rubbed Gently by Akik stone. Then adding Khoppra & Ghee and inserting the design of colour boarder all round including desired colour stone pigment to match the existing colour.(40.16)

Providing & applying Lime Kara 1:2 (1lime cream : 2 Zikki powder) grinding mortar with grinding mill/manualy on lime base, on flat surface in two coats. First coat applying 3mm to 4mm. thick and curring properly at least 7 days, second finishing coat done after 7 days of previous coat as per traditional practice. (thickness not more then 6 mm.) 40.19

Add extra for Lime Kara work (on lime plaster base) other then flat surface as per traditional practice with all lead & lift with fine finishing complete in all respect on ….

(a) domical surface / spherical surface / domical ceiling,(C-4/4.7.1)

(b) curved surface(C-4/4.7.2)

Making Kangoora on top of the wall as per Jaipur traditional practice with tile brick in grinded lime Surkhi mortar 1:2, thickness of kangoora 15 cm. & height 45 cm., finishing with lime surkhi mortar 1:2, complete in all respect upto 10.00 mtr. from ground level including all scaffolding, lead & lift. 40.23

Scraping & Removing of white wash/ distemper / algli etc. form plain plaster & surfaces gently with care to keep intact the old designs.40.25

Providing and fixing double leaf Door wooden shutters made of 1st grade M.P. teackwood as per traditional design (Deshi pattern) planks thickness 40mm and width of Binies, Andheri 50mm and thickness 35mm, including Adwa etc. with fittings (nails, sankal, kunda, cheri, handle etc.) as per existing matching / as per approved design with moulding / carving complete in all respect. M.P teak wood grade Ist40.35.1

Chemical treatment of araish surface to clean from yellowness, blackness, algal growth, dust, dirt oily accretions, lime & gypsum deposits, filling of gaps & cracks and application of preservative coating to prevent algal growth and make the surface water proof.(40.45)

Khameera Colour Washing as per traditional practice to prepare the Khameera the lime should be slaked at least for 7-10 days and regularly it should be stirred by adding curd Gugal, for non-synthetic colour adding gum (babool gum) as per specification. Then applying prepared solution on walls three to four thin coats as desired finishing. (40.17)

Deduct for khameera work if kangoora / design / lining work not done

Please Enable Macros to View BoQ information