REPAIR TO DRAIN, FENCING, CULVERT PATH AND COMPOUND WALL UNDER AGE B/R-II AT GE JHANSI

Amount

Demolition of Brickwork or stone/boulder masonry, built in lime mortar including all quoins, arches, pillars,etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed

M&L for Brickwork with Fly ash bricks (Old size) straight or curved on plan exc 6m mean radius buiilt in CM (1:6) complete all as specified and as directed

M&L for Brickwork with Fly ash bricks (Old size) straight or curved on plan exc 6m mean radius buiilt in CM (1:4) half brick complete all as specified and as directed

Taking down cement plaster , hacking for key ,scrubing down with water etc complete all as specified and as directed

M&L for 15 mm thick rendering in CM 1:6 on fair faces of brick work or concrete surface as in finished even and smooth without using extra cement complete all as specified and as directed

M&L for 15 mm thick rendering in CM 1:4 on other than fair faces of brick work or concrete surface as in finished even and smooth without using extra cement complete all as specified and as directed.

Dismantling post or struts (wood, steel or RCC) any section incl taking out embeded portion in concrete, brick work, RR masonary etc. and making good disturbed ground complete all as specified and as directed.

Dismantling fencing wire any type complete all as specified and as directed

Excavating in post holes or similar holes, each not exceeding 0.5 Cum, getting out in Hard/ dense soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, and removing surplus soil to a distance not exceeding 50 M complete all as specified and as directed

M&L PCC Type D2 1:4:8 (using 40 mm graded stone aggregate) in foundations, filling and mass concrete, complete all as specified and directed.

M & L for angle iron posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed

M&L preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint (ordinary tint) over a coat of red oxide primer, complete all as specified and directed.

Supply and fixing chain link fencing of MS GI wire mesh of size 100x 100 mm of 4 mm dia of GI wire including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and directed.

Supply and fixing chain link fencing of MS GI wire mesh of size 50x 50 mm of 3 mm dia of GI wire including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and directed.

Refixing of Chain link fencing including line wires, any mesh, size and type to any type of standerd, rails, straining bolts, etc including provision of binding wire complete all as specified and directed..

S & F in repairs galvanised 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossings with and provision of galvanised mild steel wire, staples of steel pins etc. all as specified and directed .

Refixing of galvanised 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossings with and provision of galvanised mild steel wire, staples of steel pins etc. all as specified and directed .

Restraining, resecuring, including making good staples etc to existing barbed wire fencing in repairs complete all as specified and directed by Engr-in-Charge.

Demolition of RCC Not exc 15cm thickness Roofs, floors (other than ground floors), beams staircases, landing, chajjas, Cover slab and similar suspended work complete all as specified and directed.

M&L for RCC 1:2:4 (Nominal Mix)(20 mm stone agg) Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L for RCC Nominal mix type B1 1:2:4 20mm gradded agg as in coloum complete all as specified and directed.

M&L for mild steel deformed TMT bars 5 mm To 10mm dia (as in reinforcement) cut to length, bent to shape require including cranking, bending spirally for hooking for column, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

Form work to flat soffits of suspended slabs such as roof slabs, floor slabs and lintels, landingand similar work n exc 200mm thick complete all as specified and directed.

Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide all as specified and directed.

Demolition of plain cement concrete (un-reinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed..

Surface dressing n exc15 cm deep in Hard / dense Soil complete all as specified and directed.

M&L 75 mm thick cement concrete type D2 1:4:8 (using 40 mm graded stone agg) in sub base of flooring/ hard standing complete all as specified and directed by engr in charge

M&L Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade confirming to IS-15658 (2006) with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc.,of required strength, thickness & size/shape, made by table vibratory method using rubber mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specifed and directed.

M&L for PCC Type B-0, 1:2:4 (12.5 mm Stone Aggregate) , in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, kerb stop rounded or chamfered in edges complete all as specifed and directed.

M&L for Providing precast cement concrete louvres and jallies, type B0, 1:2:4 (using 12.5 mm graded agg) 45mm thick (measured solid), including all mouldings but excluding frame and set in cm 1:4 complete all as specified and directed.

M &L preparing new surfaces of plastered or unplastered surfaces and applying two coat of cement base paint complete all as specified and as directed.

M&L for preparation of new plastered surface and applying three coats of white wash (lime) on new plastered surface of walls, complete all as specified and as directed.

M/s Jagdish Chandra Arora

M/S Kesav Dev Agarwal

Shree Jee Associates

M/S AADI TRADERS

Dubey Construction Company

M/S BABA CONSTRUCTION

M/s JS Constructions

Khushi Muskan Engineer & Developer