REPAIR MAINTENANCE AND OVERHAULING OF LIFT EOT CRANE MECHANICAL LAUNDRY AND MAINT OF SWIMMING POOL UNDER GE I GOS

Amount

Comprehensive maintenance and repairs of Mechanical laundry consisting of following items (Spares/items mentioned herein after shall be paid seperately. Cost of any other spares not included in items herein after shall be borne by the contractor):- Items covered for preventive and breakdown maintenance are:- (i) Industrial Water Extractor Model NXS15 – 1 No. (ii) Industrial Water Extractor ModelNXS30 – 2 Nos (iii) Industrial Drying Tumbler Model DRS 30- 1 No. (iv) Flat bed Drying Press Model FPS150 (v) Air compressor – 1 No. Note :- maintenance will be carried out by OEM in every quarter

Sypply and fix in repair for hose pipe for drain straight 3" for AXE 15 complete

Supply and fix in repair for over flow pipe 1.25" for AXE 15 complete

Supply and fix in repair for drain L shape 3" for AXE 15 complete

Supply and fix in repair for hose pipe for drain straight 3" for AXE 30 complete

Supply and fix in repair for coil with core for drain vlave for AXE 30 complete

Supply and fix in repair for control relay for AXE 30 complete

Supply and fix in repair for relay with base for AXE 30 complete

Supply and fix in repair for electric heater for AXE 30 complete

Supply and fix in repair for V belt B 98r for AXE 30 complete

Supply and fix in repair for door lock electromagnetic for AXE 30 complete

Supply and fix in repair for heater for DRE 30 complete

Supply and fix in repair for forward reversing timer for DRE 30 complete

Supply and fix in repair for V belt A 87 for DRE 30 complete

Supply and fix in repair for V belt B 65 for DRE 30 complete

Supply and fix in repair for hose clamp for DRE 30 complete

Supply and fix in repair of solenoid cut off switch complete as specified and as directed

Supply and fix in repair of push button start stop type complete as specified and as directed

Supply and fix in repair of Nozzle 4 mm and as per existing sample complete as specified and as directed

Supply and fix in repair of Checking and thoroughly cleaning of steam supply MS Pipe line to all equipments connection and point complete all as specified and as directed. Note: overhauling asbestos rope and aluminium foil paper etc. Are included in the unit rate quoted.

Supply and fix in repair of steam line control valve as per existing sample complete all as specified and as directed.

M&L for cleaning of Air compressor Machine air line and air storage tank as per existing sample complete all as specified and as directed.

Supply and fix in repair of pressure release valve per existing sample complete all as specified and as directed.

Supply and fix in repair of double function type bearing for washer extractor or drying tumbler of capacity of 30 Kgs including all fitting and fixture washer nut,bolts complete all as specified and as directed

Supply and fix in repair Vibrator bush as per existing sample complete all as specified and as directed

Supply and fix in repair of hydraulic type jack oil SAE-90 super cleaning of complete hydraulic pressure (Refilling of oil and sealed with oil cap) completer all as specified and as directed

Comprehensive maintenance and repairs of electrically operated overhead travelling cranes (EOT) consisting of main girder, cross travel, hoist crab, carriage, long travel drive mechanism, long and cross travel wheel pinions, bearings, rope drum, gear boxes, motors, wire rope, limit switches, overload and time delay relays/resistors, bottom control panels, contactors 3 pole, pendant push button suspension mechanism, etc complete of the EOT Crane 1 Ton to 3 Ton Capacity (Spares/items mentioned herein after shall be paid seperately. Cost of any other spares not included in items herein after shall be borne by the contractor)

Rewinding of 3 phase 415 Volts electric motor of main hoist, creep hoist, long traverse and cross traverse of following capacity with super enamelled copper conductor of gauge as per the existing for Electric motor above 1 HP but upto and including 5 HP.

Supply of spares for EOT cranes of MCB SP 6 to 32 Amps, 240V (Make: Schnider Eletric, Havell's, indo asian, L&T)

Supply of spares for EOT cranes of MCB two pole 16 to 32 Amps, 240V (Make: Schnider Eletric, Havell's, indo asian, L&T)

Supply of spares for EOT cranes of MCB triple pole 16 To 32 Amps, 240 V (Make : Schnider Eletric,, Havell's, indo asian, L&T)

Supply of spares for EOT cranes of MCB triple pole and neutral 32 to 63 Amps, 240 V (MakeSchnider Eletric,, Havell's, indo asian, L&T)

Supply of spares for EOT cranes for contactors 4 pole 25 Amps, 3Ph, 415V (Make: Schnider Eletric,, L&T, BCH)

Supply of spares for 32 Amps, 3Ph, 415V, (Make: Schnider Eletric,, L&T, BCH)

Supply of spares for EOT cranes of contactors 3 pole 40 Amps, 3Ph, 415V, (Make: Schnider Eletric,, L&T, Siemens)

Supply of spares for EOT cranes of contactors 3 pole 70 Amps, 3Ph, 415V, (Make: Schnider Eletric,, L&T, Siemens)

Supply of spares for EOT cranes of overload relay 16 to 44 Amps, 415 V, (Make: Schnider Eletric,, L&T, Siemens)

Supply of spares for EOT cranes of overload relay 4-11 Amps, 415 V, (Make: Schnider Eletric,, L&T, Siemens)

Supply of spares for EOT cranes of overload relay 0 to 4 Amps, 415 V, (Make: Schnider Eletric,, L&T, Siemens)

Supply of spares for EOT cranes of) Illumanated push button switch LED type with accessories (Make Schnider Electric)

Supply of spares for EOT cranes of Cable PVC insulated sheathed with copper conductor of size 4 Core 2.5Sqmm with metal hose covered

Supply of spares for EOT cranes of Cable PVC insulated sheathed with copper conductor of size 4Core 1.5Sqmm with metal hose covered

Supply of spares for EOT cranes of Cable PVC insulated sheathed with copper conductor of size1.5 sqmm 16 core

Supply of spares for EOT cranes of Ball bearing of Size 6208/6209. make : SKF

Supply of spares for EOT cranes of Topping up of Gear box oil 90 Grade Servo in sealed containers. (MAKE:- SERVO/CASTROL)

Supply of spares for EOT cranes of Brake Unit for 100 mm dia for EOT/HOT cranes. (Make BCH / PATHE)

Supply of spares for EOT cranes of Brake Unit for 150 mm dia for EOT/HOT cranes. (Make BCH / PATHE)

Supply of spares for EOT cranes of Steel wire rope of size 10/12 mm dia construction 6x19 Fibre core suitable for EOT/HOT cranes . Make : Usha martin

Supply of spares for EOT cranes of Limit switch 6A roller/lever type for EOT cranes(MakeJai Balagi/L&T/BCH)

Supply of spares for EOT cranes of MCB TPN 63 Amps, 415 Volts (Make- L&T/Siemens/Schnider)

Supply of spares for EOT cranes of MCB TPN 40 Amps , 415 Volts (Make- L&T/Siemens/Schnider)

Supply of spares for EOT cranes of MCB SPN 32 Amps , 415 Volts (Make- L&T/Siemens/Schnider)

Supply of spares for EOT cranes of MCB SPN 16 Amps , 415 Volts (Make- L&T/Siemens/Schnider)

Supply of spares for EOT cranes of MCB SP 6 Amps , 415 Volts (Make- L&T/Siemens/Schnider)

Supply of spares for EOT cranes of Fuse cutout 50 Amps

Supply of spares for EOT cranes of Fuse cutout 32 Amps

Supply of spares for EOT cranes of Steel Wirerope 16 Sqmm as per existing complete

Supply of spares for EOT cranes of Steel Wirerope 12 Sqmm as per existing complete

Supply of spares for EOT cranes of Steel Wirerope 10 Sqmm as per existing complete

Supply of spares for EOT cranes of Copper wire 1.5 Sqmm 10 core complete

Supply of spares for EOT cranes of Step down transformer 415-110V AC

Supply of spares for EOT cranes of Step down transformer 415-150 Volts AC

Carry out load and deflection test for each EOT crane from 1 to 3 TON capacity upto 125% full load with necessary instruments on hoisting, LT/CT for checking the performance of the cranes as directed by the engineer In Charge/and upto the users safisfaction. Note: (i) Load/deflection test is to be carried out by the Govt authorized inspector to carry out test in the relevant field in presence of the department rep and recording the test and issue necessary certificate. (ii) The load required for the testing and necessary transportation, will be arranged by the contractor at the location of testing as per ground requirement.

Painting of EOT crane complete with double girder by scraping the old surface and applying one coat of primer with two coat of emulsion paint as per existing colour as per direction of Engr-in-Charge complete all as specified and directed

M&L for repair and maintence of lift 15 passenger and 1320 kg with repair of mechanical parts and attending day to day breakdown complaints/ emergency breakdown compalint after receiving phone from JE concerned. Testing of lift to be carried out every month by KONE company representative and test report in this regards to be submitted by contractor till the completion of his contract.

Supply and fixing of energy saving environmental friendly and robust mediumbaty / highbay LED luminaire with high efficiency (100 lm/W) with toughened glass of capacity 120 watts complete all as specified and directed

M/L in replacement of 2 Runs of cable PVC insulated but unsheathed 1.5 Sq mm, stranded copper conductor in and including PVC conduit with continuous earthing cable PVC insulated 1.5 Sq mm, stranded copper conductor all as specified and directed.(Cable make Anchor/Havells/Finolex) Note :-2 runs of cable, one run of earth wire (copper cable) & one run of PVC conduit shall be measured as one running metre.

Supply and fixing LED street light fitting 45 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete

Supply and fixing LED street light fitting 60 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed .

M/L for replacement of Earthing complete with GI earth plate 60x60cmx6mm thick electrode and using galvanised iron strip 32 x 6 mm as earthing lead burried directly in ground ( earth pit not less then 2.25 metres deep below ground level ) with top edge of the plate not less then 1.5 metres below normal ground level. connected to GI wire earth lead 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 of SSR Part-I and incl earth work,PCC pit and RCC cover,watering pipe 20 mm dia light grade,funnel,wire mesh,protection pipe 15 mm dia light grade up to 7.5 mtr length of earth wire,charcoal dust and salt etc and connected to earthing test point complete all as specified and as directed .

M/L for replacement of Earthing complete with GI earth plate 60x60cmx6mm thick electrode and 4mm dia GI wire as earthing lead.burried directly in ground ( earth pit not less then 2.25 metres deep below ground level ) with top edge of the plate not less then 1.5 metres below normal ground level. connected to GI wire earth lead 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 of SSR Part-I and incl earth work,PCC pit and RCC cover,watering pipe 20 mm dia light grade,funnel,wire mesh,protection pipe 15 mm dia light grade up to 7.5 mtr length of earth wire,charcoal dust and salt etc and connected to earthing test point complete all as specified and as directed .

M&L for in repairs maintenance free battries for lift type EP 12-12, capacity 12V 12 Ah valve regulated lead acid, Absorbent glass matting (AGM ) battery complete all as specified and as directed .. Note :- Battery should be suitable to be fixed with the existing arrangement.

S&F in repairs PVC insulated and FR PVC round sheathed copper conductor(flexible), 1100 volts, conforming to IS 694 of size 1.0 Sqmm 3 core complete all as specified and directed

Material and labour for swimming pool of size of 50 mtr x 21 mtr, water of capacity 3200000 ltrs, combined diving and swimming pool basic depth varies from 4ft, 6ft, 8ft and to meet to the desired level of cleanliness by adding the chemicals such as PH solution and non ferrous alum as coagulant / settling aids, soda ash, Dry acid, Sodium Bi-Alginex,chlorotex regent,TCA90 chemical thourgh the respective dozin system with adequate quantity and Daily Cleaning of swimming pool by operating vaccum pool suction sweeper , cleaning of bottom incl deep, slop surface by under water cleaner and removing sediment particle from bottom by using suction sweeper so as to maintain deepest point of pool must be visible at all times without distrubing the swimming pool schedule of operation, quality of water to be checked as directed by Engr-In- Charge frequency, complete all as directed. Note : T&P such as necessary equpments for under water cleaner, brushes, breathing arrangements shall be provided by the contractor Chemicals not covered under Sch shall be deemed to be included in the unit rate quoted. Following water standard parameters to be maintained on pool round the clock. PH - 7.4 to 7.6 Free chlorine -0.5 to 1.0PPM Total alkatinity -75 PPM Minimum ,TDS-500PPm Minimum,Total Hardness -200PPM Minimum Note : (i) Any damage to the Department assets handed over for cleaning and maintenance of swimming pool with negligence of firm shall be made good by the firm without any extra cost to the department. (ii) T & P, material, labour, element involved in cleaning shall be provided by firm without any extra cost to the Deptt.

M & L for carry out water quality anyalsis for bacterial , chemical and biological analysis including for collection of water samples from the swimming pool all as specified by Engineer-in-charge and testing from Govt approved testing laboratory , submitting of report from minium following parameters . (a) pH (b) Total alkatinity (c)Total Hardness 9d) Magnesium as Mg 9mg/I) (h) Remarks of Govt testing lab .

M&L for pumping out existing water from swimming pool, balancing chamber, under ground water storage sump complete, Cleaning the pool, chamber and under ground water storage sump throughly by brushing, removing ugly spot, algae by using suitable chemicals as necessary and finally washing with bleaching powder to entire satisfication of Engineer-in-Charge.

M&L for suction sweeping brush holder made up of MS frame,springs to apply sufficient pressure on brushes for smooth cleaning of bottom surface of swimming pool, rubber gasket round the MS frame holder,adjustable spring pressure mechanisam entire holder should have minimum 30Kgs weight complete all as specified and as directed .

Supply and mixing Trichloroisocyanuric Acid 90 (TCCA 90) (1PPM) In swimming pool through dozing plants complete all as specified and as directed .

Supply and mixing Alginex (10PPM) In swimming pool all as specified and directed to achieve desired parameters complete all as specified and as directed .

Supply and mixing Dry Acid In swimming pool all as specified and directed to achieve desired parameters complete all as specified and as directed .

Supply and mixing Bleaching powder In swimming pool all as specified and directed to achieve parameters complete all as specified and as directed .

Supply and mixing Non Ferric Alum In swimming pool all as specified and directed to achieve desired parameters complete all as specified and as directed .

Supply and mixing Caustic Soda In swimming pool all as specified and directed to achieve desired parameters complete all as specified and as directed .

Supply and mixing Chlorotex regent In swimming pool complete all as specified and as directed .

Supply and mixing Crystal copper sulphate (CDH ) In swimming pool complete all as specified and as directed .

Supply and mixing Potential of Hydrogen Solution (PH) In swimming pool complete all as specified and as directed .

M/s Bapujee Builders and Traders (BID ID -3084442)

R K Traders (BID ID -3079853)

R J ENTERPRISES (BID ID -3088062)

M/S S. N. ENTERPRISES (BID ID -3079765)

M/S.J.BIJAYA KUMAR PATRO (BID ID -3090073)

M/s M M Engineering Systems (BID ID -3079684)

M/S JAGANNATH SASMAL (BID ID -3081180)