CERTAIN REPAIR WORKS TO UG SUMP ROOF CHAJJA PARAPET WALL ALONGWITH CERTAIN REPAIR INCLUDING SCHDULE IN REGULAR MAINTENANCE OF BLDG WORKS UNDER AGE BR II FOR CABS STIR CEMILAC BANGALORE

Amount

M&L Wet Shortcrete(Gunniting) (M25) mix of cement concrete applied from a nozzle with compressed cleaned air and water added to the nozzle and approved admixture to attain quick setting and high strength including cutting chiseling,making good and panting should be match with existing surface as per directed by Engr-in-Charge.

Demolition of RCC as in Chajja of fourth storey building or height upto and including 15 mtr etc., including cutting old reinforcement to facilitate demolition complete

M&L Reienforced cement concrete type B-1, 1:2:4 (using 20 mm graded stone aggregate) as in chajja of four storey building or height upto and including 15 mtr etc including necessary form work/scaffolding etc complete all as specified and as directed

Mild steel bars 10mm dia and over for fourth storey building height or height upto and including 15 mtr etc., cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete

Taking down existing any type of handle from any type of mild steel window shutters through cutting and fixing mild steel handle of size 100mm in the same window shutter by welding. The rates should be include the following aspect :- (a) Cutting of existing handle from window shutter. (b) Fixing of 100mm mild steel handle in the same window shutter by welding. (c) Easing and adjusting the shutter before refixing if found required. (d) Finishing the surface in all respect to match with the existing surface. (e) Necessary scafolding for building height upto and including 12 mtr or 4 storey which ever is high is included in the item no extra payment shall be made.

S&F in repair 3mm thick figured glass, pin head type and glazing with oil putty in square n.exc 0.5 sqm each panes complete all as specified.

Taking down Chowkats or Frame (without taking off shutter from the frame) exc. 1.50 sqm but n exc 4.00 Sqm each .

Taking down Chowkats or Frame (without taking off shutter from the frame) n exc. 1.50 Sqm

S&F anodised aluminium frame and shutter powder coated for doors and windows, ventilators, partition with one or more rebates including joining cleat,rubber beading for fixing, star lock etc complete.

S&F 9 mm thick pre laminated particle boards exterior grade, prelaminated both sides with decorative choice laminations fixed in aluminium partions/doors with rubber beadings complete all as specified and as directed

S&F sheet glass 4.00 mm thick, ordinary quality and glazing with rubber beadings suitable for aluminium frame work, in square n.exc. 0.5 sqm in each pane complete all as specified and as directed

S&F in repairs providing and fixing factory made uPVC white colour sliding window of area n.ex 2.0 sqm each. Three track made of extruded profiles with wall thickness of 2.3 mm (plus or minus 0.2 mm). Window profile with hollow section with multi chamber, frame (88 mm x 52 mm), sliding sash (42 mm x 67 mm), sliding mesh sash (42 mm x 57 mm), sliding interlock (one vertical length in each shutter) (45.5 mm x 28 mm), Glazing bead (24.5 mm x 16 mm) will be mitred cut and fusion welded at all corners, including railing of holes for fixing of hardware and drainage of water etc., making arrangement for fixing of hardware, EPDM gasket, 1.2 plus or minus 0.2 mm thick galvanized steel frame (30 mm x 18 mm) 2 nos, sliding sash (30 mm x 18 mm), sliding mesh sash (26 mm x 10 mm), profile to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100 mm long fasteners, Hardware : (touch lock of zink alloyed (white powder coated), steel roller system, stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.4 mm and required accessories) Note : the unit rate quoted by contractor excluded cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose)

S&F heat obsorbing glass of 4 mm thick for fixing in uPVC window complete all as specified and as directed.

Writing letters to bldg name and Nos in triangle ,Painting lines dashes, arrows, letters, etc like exceeding 10 cm b not exceeding 30 cm wide white,black golden,& yellow, all as specified and directed by Engr In Charge..

Material and Labour for Preparation of old surface and applying one coat of distemper oil emulsion on walls surfaces complete all as directed by Engineer-in-charge.(ht Upto 20 Mtr including all necessary scaffolding)

Material and Labour for Preparation of old surface and applying one coat of distemper oil emulsion on ceiling surfaces complete all as directed by Engineer-in-charge.(ht Upto 20 Mtr including all necessary scaffolding)

Material and Labour for Preparation of old treated surfaces of walls and applying a coat of white wash / colour wash complete all as directed by Engineer-in-charge (ht Upto 20 Mtr including all necessary scaffolding)

Material and Labour for Preparation of old treated surfaces of ceiling and applying a coat of white wash / colour wash complete all as directed by Engineer-in-charge (ht Upto 20 Mtr including all necessary scaffolding)

M&L Preparation of old painted wooden surfaces of any description over 10 cm girth or width and applying one coat of synthetic enamel paint of any tint all as directed by Engineer-in-charge (ht Upto 20 Mtr including all necessary scaffolding)

M&L Preparation of old painted steel surfaces of any description over 10 cm girth or width and applying one coat of synthetic enamel paint all as directed by Engineer-in-charge (ht Upto 20 Mtr including all necessary scaffolding)

Material and labour for preparation of old wall surfaces , preparing wall surfaces and applying one coat of plastic emulsion paint complete all as specified and directed (ht Upto 20 Mtr including all necessary scaffolding)

Taking down cement plaster on brick or stone walls or concrete surfaces including racking out joints, hacking for key and scrubbing down with water etc complete (ht Upto 20 Mtr including all necessary scaffolding)

Material and Labour for rendering 10mm thick in CM 1:6 on brick/concrete walls finished even and smooth with out using extra cement (ht Upto 20 Mtr including all necessary scaffolding)

Material and Labour for rendering 15mm thick in CM 1:4 on brick/concrete walls finished even and smooth with out using extra cement (ht Upto 20 Mtr including all necessary scaffolding)

Material and Labour for rendering 5mm thick in CM 1:4 on brick/concrete chajja / facia / ceiling etc (ht Upto 20 Mtr including all necessary scaffolding)

Material and Labour preparation of newly plastered wall surfaces and applying two coats of oil bound distemper all as specified and directed. (ht Upto 20 Mtr including all necessary scaffolding)

Material and Labour preparation of newly plastered ceiling surfaces and applying two coats of oil bound distemper all as specified and directed. (ht Upto 20 Mtr including all necessary scaffolding)

M&L applying 2 coats of Exterior emulsion weather proof paint over a coat of primer on new plaster wall surfaces including prepration of new plaster and all as specified and directed (Make/Brand Name : Asian Paints(Apex ultima), Berger Paints(Weather coat All Guard)(ht Upto 20 Mtr including all necessary scaffolding)

M&L applying 2 coats of Exterior emulsion weather proof paint over a coat of primer,incl removal of existing treatment on wall surfaces including cornices, plasters etc by scrapping/down with wire brushes and washing down and removing existing loose finishes particles etc all as specified and directed (Make/Brand Name : Asian Paints(Apex ultima), Berger Paints(Weather coat All Guard)(ht Upto 20 Mtr including all necessary scaffolding)

M&L 2 mm thick wall care putty on wall

M&L prepration of old surface on wall and applying one coats of cement base paint complete all as specified and as directed

M&L applying ONE coats of Exterior emulsion weather proof paint on wall old surfaces including cornices, plasters etc by scrapping/down with wire brushes and washing down and removing existing loose finishes particles etc all as specified and directed (Make/Brand Name : Asian Paints(Apex ultima), Berger Paints(Weather coat All Guard)(ht Upto 20 Mtr including all necessary scaffolding)

M&L complete removal of existing treatment and preparation of old plastered surfaces of wall and applying 1.5 mm thick wall care putty to receive the good & smooth surfaces and applying two coats of distemper oil emulsion paint over a coat of primer.(ht Upto 20 Mtr including all necessary scaffolding)

Dismantling floor, hearth or wall tiling including cement mortar bedding (not backing) removing serviceable tiles to store and rubbish off the premises.

Removing of demolition/excatated materials to a distance exc. 1.5 KM, but n.exc 5.0KM and depositing out side MD land.

S&F PVC(SWR) floor trap 75 mm Plain with Grating incuding Jointing with solvent cement fixed in repairs complete all as specified and as directed

S&F PVC multi floor trap 75 mm with grating including jointing with solvent cement fixed in repairs complete all as specified and as directed

Grating doom Stainless steel 100mm dia of in repairs (Minimum weight 25gms)

M&L Non - skid Ceramic tiles joint free 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white cement to match including 15mm thick screed bed in cm 1:4 complete all as specified and as directed

Material and labour for glazed coloured ceramic tiles in vertical surfaces for wall tiles of size 450 x 300 x 7 mm thick as in dados, set and jointed in neat cement slurry and pointed in coloured cement to match coloured tiles with joint free including 10mm thick screed bed in cm 1:4 complete all as specified and as directed

Material and labour for Durastone heavy duty coloured external tiles, first quality, of size 300mm x 300mm x 10mm thick as in floor, set and jointed in neat cement slurry and pointed in white cement with pigment to match the shade of tiles over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed. MAKE : SOMANY cat Tactile Jaisalmer / taracotta or equivalent in KAJARIA/ NITCO/ BELL/ JOHNSON

S&F PVC sheets 1.5mm thick laminated plain coloured, marbled mosaic or mottled finish, laid with approved rubber based adhesive in floors in repairs complete all as specified and directed.

Taking down PVC (SWR) pipes any dia.

Supply and fix PVC (SWR) pipes single socketed 160 mm bore including all fittings like bends & shoe laid in floor trenches/wall.(ht Upto 20 Mtr including all necessary scaffolding)

Supply and fix 110 mm dia bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed

Supply and fix 75 mm dia bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed

Supply and fix PVC (SWR) bends any radius 110 mm dia of bore complete all as specified and as directed

Supply and fix PVC (SWR) bends any radius 75 mm dia of bore complete all as specified and as directed

R R Constructions

SAI CONSTRUCTIONS

G K CONSTRUCTIONS

V.R.Enterprises

Sai Ram Builders

SHRI NARAYANADRI ENGINEERS & BUILDERS

C R R CONSTRUCTIONS