Water Supply

Drilling of the tube wells by down the hole hammer drilling to a finished dia of (6½ “ Ǿ dia in all formations suitable for down the hold hammer drilling such as medium hard rock to hard rock formation all nsolidated formation etc., and remaining the bore to suit insertion of PVC casing pipe etc., including the insection of 180mm. PC casing pipe any other relevant materials required up to depth as defected by the departmentally officers, but excluding cape including transportation of drilling rig to work spot and including bore lopment (flushing the Bore well) and on average pressure of 100 PSI conducting yieldest crow charges, cost of all ther charged on fixation of pipes assembly complete. Depth and as stipulated in SCHEDULE-A for any where in A.P. the entire work should be carried out as per 2800 Part-II 1970-060 mts. Upto 90 M

Drilling of the tube wells by down the hole hammer drilling to a finished dia of (6½ “ Ǿ dia in all formations suitable for down the hold hammer drilling such as medium hard rock to hard rock formation all nsolidated formation etc., and remaining the bore to suit insertion of PVC casing pipe etc., including the insection of 180mm. PC casing pipe any other relevant materials required up to depth as defected by the departmentally officers, but excluding cape including transportation of drilling rig to work spot and including bore lopment (flushing the Bore well) and on average pressure of 100 PSI conducting yieldest crow charges, cost of all ther charged on fixation of pipes assembly complete. Depth and as stipulated in SCHEDULE-A for any where in A.P. the entire work should be carried out as per 2800 Part-II 1970-060 mts. above 90 M

Supply of 180mm dia /6kg/cm2 PVC casing, pipe including all taxes etc., complete. (SSR Page No:488 PVC Pipes-IS : 4985/2000 (3rd revision)

Manufacture, suply & delivery of HDPE pipes 63 mm /12.5 Kg cm2 dia conforming to IS 4984-1995 including trnasportation to any where in A.P., excluding excise duty, satle tax and specials etc., complete (Supply upto 90 mm dia in coil & above 90mm dia straight length in 6 M.)

Supply and erecting, ISI mark submersible 5.00 HP 12-16 Stage single phase ISI submersible motor pumpset suitable for 165mm dia borewell with high quality water resistance and dynamically balanced bronze impeller with stainless steel shaft sleeves, pump coupling and pivot of 3 Phase 415V, 50Hz., Makes : Kirloskar / Crompton / CRI L &T / Texmo / Varsha (ELEC-5.6.1-a)

Supply and Run of 1 of 6 Sq.mm WPTC aluminum cable along with No. 10 SWG G.I. bearer wire through PVC cleats with all accessories including labour charges etc., complete. (vide DER No 188/2022-23, dt:06-09-2022 by the EE(PH) Division, Karimnagar)

Supply of 3 Core FlatCopper cable of ISI for SubmersibleMotors.Makes : Polycab / GM / Million / V-Guard/ Gold Medal / Kundancab / HPL / RPG /Nandicab / Payal / Finecab / Gemini /Vimal / Suncab / Delton / Ollvin / Airson/ Stanjo/ Nakoda / Beljin / Savera Champion / Rhino

Supply, Transportation and fixing of 50 mm 450mm length, 12mm thickness and 75mm wide MS Clamp set with required nuts and bolts.

Motor Cover made with GI sheet of 18 SWG for protection from rain complete (Bore Cover)-150 mm dia galvanised bore cover (ELEC-5.14.6 )

Supply and Transportation of control panel for Three phase submersible motorsup above 5 HP to 7.5HP @ 415V 50Hz operating range between 80 to 240V including supply and fixing of Direct - on - Line LTLK / SIEMENS / CROMPTON make Volt meter and Ammeter with starting and running capacitors assembled with ISI mark contactors and fitted with Legrand makeISI mark MCB etc., complete. (ELEC- 5.10.3)

Supplying & fixing Bronze Vertical Check (Non return) Valve as per IS-778 I-class heavy duty - 40 mm NB Size including cost and conveyance, all labour charges etc., complete.(TBSP-G.III-18 :

Supply, Transportation and fixing of 90 degree bend with length of 20cm (Center to face) galvanised GI bends heavy duty with threaded at both ends for installing the pump set includingcost and conveyance of all materials,taxes etc., complete.ELEC-5.14.3 (a)

S& F GI union 50 mm nominal size Ist Quality

D.O.L. Starter 250V, Phase, 50 Hz.. enclosed with no Volt and coil and overload protection with necessary materials, etc. complete suitable upto 3HP.(ELEC-5.4.1 (a))