Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹40.5 LAccepted-AOC | L1 | Accepted-AOC Being lowest and reasonable | |
| 2 | L2₹44.0 L+₹3.5 L (8.74%)Rejected-Finance | L2 | Rejected-Finance Being not lowest | |
| 3 | L3₹44.5 L+₹4.0 L (9.86%)Rejected-Finance | L3 | Rejected-Finance Being not lowest | |
| 4 | L4₹45.6 L+₹5.1 L (12.7%)Rejected-Finance | L4 | Rejected-Finance Being not lowest | |
| 5 | L5₹45.9 L+₹5.4 L (13.3%)Rejected-Finance | L5 | Rejected-Finance Being not lowest |
Tender Value
₹38.0 L
EMD Value
₹76,000
Closing Date
10 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GARRISON ENGINEER
Garrison Engineer Rowriah Jorhat 785005 Assam
PROVN OF DEFICIENT OTM ACCN AT LICHUBARI UNDER GE JORHAT
2022_MES_550110_1
8080/E8
Open Tender
Civil Works
Item Rate
180 days
GE JORHAT
Please refer tender documents
6 documents required · 6 mandatory
₹500
GE JORHAT
₹76,000
Yes
10 Nov 2022
5 Sept 2022
14 Oct 2022
5 Sept 2022
10 Oct 2022
30 Sept 2022
5 Sept 2022 - 12 Sept 2022
Amount
NOTES :(i)The bidders/contractors are advised to read tender document & all corrigendum/ amendments and General conditions of contracts before entry/quoting the rates.
Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil
Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth for foundation etc. or for shafts, wells, cess pits, manholes, pier holes etc. not exceeding 10 Sqm on plan and not exceeding 1.5 m in depth and getting out as in soft/loose soil.
Removing excavated material (soil) not exceeding 50 m and depositing where directed at a level n. exc. 1.50 m above the starting point.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm as in soft/loose soil.
Materials and Labour for anti termit treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall complete all as specified and directed.
Materials and labour for anti termite treatment in treating the backfill in contact with foundation at the rate of 7.50 litres of emulsion per square metre of vertical surface (Area of the substructure in contact with backfill to be measured.) complete all as specified and directed.
Materials and Labour for anti termite treatment in treating the top surface of filled earth at the rate of 5 Litres of emulsion per square metre of surface area complete all as specified and directed.
Materials and Labour for anti termite treatment in treating the soil under plinth protection at the rate of 5 Litres of emulsion per square metre of surface area complete all as specified and directed.
Materials and labour for treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall, complete all as specified and directed.
Material and labour for Plain Cement Concrete M-7.5(Nominal Mix) using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed.
Plain Cement Concrete M-15(Nominal Mix) using 12.5 mm graded stone aggregate as in making good window opening, lintels upto 1.5 m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, coping, kneelers, apex stones, bed plates, kerbs, water trough and the like including weathering slightly rounded or chamfered angles and throating complete all as specified and directed.
Material and labour for Reinforced Cement Concrete M-25 (Design mix) using 20 mm graded stone aggregate as in foundation & plinth beams complete all as specified and directed.
Material and labour for Reinforced Cement Concrete M-25 (Design mix) using 20 mm graded stone aggregate as in beams and Lintel Beam complete all as specified and directed.
Material and labour for Reinforced Cement Concrete M-25 (Design mix) using 20 mm graded stone aggregate as in column complete all as specified and directed.
Material and labour for Reinforced Cement Concrete M-25 (Design mix) using 20 mm graded stone aggregate as in chajja complete all as specified and directed.
Material and labour for Precast Reinforced Cement Concete cover slab type M-20 (Nominal mix) using 20 mm graded stone aggregate, set in Cement Mortar (1:4) complete all as specified and directed.
Use and waste of formwork for foundations, foundation beams etc. for rough finished surfaces of concrete complete all as specified and directed.
Use and waste of formwork to sides of columns complete all as specified and directed.
Use and waste of formwork to sides and soffits of floor or roof beams, lintels, cantilevers, shelves for flat surfaces complete all as specified and directed.
Use and waste of formwork to chajjas and similar items including edges.
Material and labour for TMT Bars Fe 500D 10mm dia & over cut to length bent to shape required inculding cranking bending spirally hooping for columns etc and binding with MS wire ennealed less than 0.9mm dia or securing with clip complete all as specified and directed.
Material and labour for TMT Bars Fe 500D 6mm dia &8 mm dia cut to length bent to shape required inculding cranking bending spirally hooping for columns etc and binding with MS wire ennealed less than 0.9mm dia or securing with clip complete all as specified and directed.
Material and labour fo TMT bars Fe 500D of 6 mm dia and over upto and including 10 mm dia in stirrups, spacers and binders, cut to length, bent to shape required including cranking, bending spirally and binding with and including mild steel (annealed) wire not less than 0.90 mm dia
Material and labour for Rolled mild hollow steel sections steel of grade YSt 310 conform to IS 4923 in roof trusses (framed), trussed, purlins, bracing and fastenings including distance pieces, cleats etc. Note:- The steel trusses shall be provide as per TD no CESZ/STD/26.
Supply and fixing of pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick and pitch length 75 mm c/c of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.
Supply and fixing of pre-painted galvatume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in ridges, tips, valley, gutters, length & girth as fixed with nail or screws complete all as specified and as directed.
Material, labour and fixed of GI Frame work for seamless ceiling comprising of GI perimeter channel 0.55mmm thick with two unequal flanges of 20 and 30mm and web of 7 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended form soffit at approx 900mm centre to entre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre complete all as specified and directed.
Material, labour and fixed of Providing and fixing 10mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface over metal frame work and reinforced with G.I. wire mesh complete all as specified and directed. Note :- Fillets, metal frame work paid separately
Material, labour and fixed of Providing and fixing 10mm thick plaster of paris ceiling (Gypsum anhydrous) to curved surface over metal frame work and reinforced with G.I. wire mesh complete all as specified and directed. Note :- Fillets, metal frame work paid separately
Material and labour for 25 mm thick Plain Cement Concrete 1:2:4 type B0 using 12.5 mm graded stone aggregate as in Damp proof course to horizontal or vertical surfaces including necessary formwork
Material and labour for Brick work with bricks class designation 75, old size, straight or curved on plan exceeding 6 m mean radius built in Cement Mortar 1:6 complete all as specified and as directed.
Material and labour for brick work with bricks class designation 75, size as per old size brick, straight or curved on plan exceeding 6 m mean radius half brick thick walls built in Cement Mortar 1:4 complete all as specified and as directed.
Rendering 15 mm in Cement Mortar 1:6 on fair faces of brick work or concrete surfaces finished even smooth without using extra cement to the plastered surface complete all as specified and as directed.
Material and labour for Rendering 15mm thick plaster in Cement Mortar (1:4) on fair faces of brick or concrete surface of wall and finished even and smooth without using extra cement, with water proofing treatment. Note:- Water proofing compound shall be measure and paid separately
Material and labour for Rendering 15mm thick plaster in Cement Mortar (1:4) on fair faces of brick or concrete surface of wall and finished even and smooth with using extra cement, with water proofing treatment.
Material and labour for Rendering 5mm thick plaster in Cement Mortar (1:3) on fair faces of concrete surface on ceiling and finished even and smooth with using extra cement, with water proofing treatment.
Supply only integral liquid water proofing compound complete all as specified and directed.
Material and labour for Preparation of new plaster wall surface and applying two coats of 1st quality acrylic washable distemper (ready mixed) having VOC content less than 50 gms/litre of required colour shade and as per manufacturer’s specification over a coat of primer over a coat of 1.5 mm thick cement base wall putty complete all as specified and directed.
Material and labour for Preparation of new plaster ceiling surface and applying two coats of 1st quality acrylic washable distemper (ready mixed) having VOC content less than 50 gms/litre of required colour shade and as per manufacturer’s specification over a coat of primer over a coat of 1.5 mm thick cement base wall putty complete all as specified and directed.
Material and labour for preparation of new external plaster surfaces and applying two coats of acrylic exterior weather resistant paint(weather proof paint @ 1.67 ltr/10 sqm per two coats ) of required colour shade and as per manufacturer’s specification over a coat of acrylic exterior primer((@ 2.20 kg/10 sqm) complete all as specified and directed.
Material and labour for preparation of new surfaces and and applying 2 coats of cement based paint over a coat of alkali based primer complete all as specified and directed.
Material and labour for 75 mm thick plain cement concrete M-10(Nominal Mix) using 20 mm graded stone aggregate as in plinth protection, finished even and smooth without using extra cement complete all as specified and as directed.
Material and labour for 75mm thick plain cement concrete 7.5 (Nominal Mix) using 40 mm graded stone aggregate as in sub base floor complete all as specified and as directed.
Material and labour for hard core of gauge not exceeding 63 mm of broken stone or boulders , spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface
Material and labour for 100mm thick plain cement concrete 7.5 (Nominal Mix) using 40 mm graded stone aggregate as in sub base floor complete all as specified and as directed.
Material and labour for Sand filling under floors or in fdns incl watering and consolidation
Material and labour for Plain Cement Concrete M-15(Nominal Mix) using 20 mm gaded stone aggregate as in Surface channel and drain
Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc.
Add or deduct for each 25 mm girth or part thereof over or under 30 cm inner girth in cement concrete complete all as specified and directed.
Material & Labour Non skid ceramic tiles, coloured, 7 to 8 mm thick (square/rectangular area of each tile exceeding 0.06 Sqm and not exceeding 0.11 Sqm , in floors etc. Set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed layer in CM (1:4) including roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc and brushign neat cement slurry with 3.0 kg of cement per Sqm complete all as specified and as directed.
Material & Labour Glazed ceramic tiles 450x300/ 300x200 x7 mm(Coloured) on vertical surfaces such as skirting, dados and riser to steps etc. set and jointed in neat cement slurry and pointed in coloured cement to match complete over 10mm thick screed bed vertical layer in CM (1:4)all as specified and as directed.
Material & Labour of vitrified ceramic tiles,double charged, light coloured shade, 10 mm thick of square/rectangular area of each tile not exceeding 0.36 Sqm , in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match over 15mm thick screed bed layer in CM (1:4)complete all as specified and as directed.
All as per item No 53 here-in-before but to vertical surfaces such as skirting over and including 10mm thick rendering in CM (1:3) complete
Material and labour for pre-polished chequered Cement Concrete tiles of 25 mm minimum thick, size of (square/ rectangular) area of each tile exceeding 0.09 Sqm but not exceeding 0.16 Sqm double layer machine pressed set ( as per IS 1237-2012), jointed and pointed in neat cement slurry in floors and cut & polished in white or coloured cement to match over and including 15mm thick screed bed in CM (1:6) complete all as specified and as directed.
Material and labour for Solid PVC door frame of size 50mm x 47 mm made out of 5 mm wood grain printed PVC sheet reinforced with Mild Steel square tube, suppling & fixing in opening as per drawing complete all as specified and directed.
Material and labour for Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and wood grain printed PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawingcomplete all as specified and directed.
Supply and fixing of Powder Coated aluminium frame for doors, with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.
Material and labour for power coated anodised aluminium door shutters made of aluminium section as per TD drawing(not less than 2.00mm thick) including necessary joining cleats,glazing clips, ruber neoprene packing, handles 2 Nos in each door, anodised aluminum snap beading screws etc. complete all as specified and as directed.
Supply and fixing of aluminium sliding window with powder coating (minimum thickness of powder coating 50 micron) including following components / specifications complete all as specified and as directed. (i) Two leaf glazed sliding shutter and one leaf gauged (fly proofing) sliding shutter. (ii) Opening of windows exceeding 0.90 Sqm but not exceeding 1.50 Sqm (iii) Thickness and weight per metre length of aluminium frame and section of shutter all as shown on drawing. (iv) All vertical/ horizontal joints shall be of extruded aluminium section so as to avoid any play between jointed members. (v) All other accessories such as jointing cleats, glazing clips, rubber neoprene packing, anodised aluminium snap beading, screws, etc. (vi) Rest all as specified in drawing no CESZ/2015/TD/007 Sheet no 1R/5, 2R/5, 3R/5, 4R/5 & 5R/5. Note Nos :- (i) All window member including fitting & fixture i.e window frame, shutter frame, mullion, clip section, hingh, handle , lock etc shall be deem to included quoted rate. Only measure opening size of window. (ii) Only Glass & wire mesh shall be measure and paid separately under relevant items of BOQ .
Supply and fixing of aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum thickness of powder coating 50 micron) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and complete all as specified and directed.
Supply and fixing of sheet glass 5.5 mm thick ordinary quality fixed to aluminum door & window in squares in each pane of required size complete all as specified and as directed..
Supply and fixing of sheet glass 4 mm thick ordinary quality fixed to aluminum door & window in squares in each pane of required size complete all as specified and as directed.
Supply and fixing of Glazing with sheet glass (frosted on one side) 4 mm thick ordinary quality with oil putty in square not exceeding 0.5 Sqm in each panel complete all as specified and as directed.
Supply and fixing of Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specified and as directed.
Supply and fixing of Butt hinges Stainless steel 100 mm size complete all as specified and directed.
Supply and fixing of Aluminium anodised barrel tower bolts of extruded section size 150 mm complete all as specified and directed.
Supply and fixing of Aluminium anodised sliding door bolt, with hasp & staple (bolt type) and fixing clips of sheet, cast of extruded sections and fixing bolts and sliding bolts of extruded sections 300 mm long .complete all as specified and as directed.
Supply and fixing of Aluminium handles cast type anodised 150 mm size complete all as specified and directed.
Double action floor spring hydraulically regulated made up of mini-mum 1.25 mm thick aluminium alloy sheet foundation box,main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed
Supply and fixing brass mortice lock vertical type, 4 lever, size 100 mm complete all as specified and directed.
Material and labour for Stainless steel wire cloth, 0.43 mm nominal dia of wire and avergae width of aperture 1.00 mm and fixed with stainless steel wire staples complete all as specified and directed.
Material and labour for 18/19 mm thick prelaminated particle board exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work. Complete all as specified and directed.
Material and labour for preparation of new steel surface and applying two coats of synthetic enamel paint over a coat of red oxide primer on new steel and iron surfaces of any description over exceeding 10 cm in width or girth complete all as specified and as directed..
Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth
M& L for cutting existing GI pipes 40 mm dia for insertion of new Tee 40X40X25 mm incl Tee for branch connection complete all as specified and as directed.
Supply and fixing of 15mm bore galvanised steel tubes, medium grade with all fitting and fixed to walls, ceiling, floors complete all as specified and as directed.
Supply and fixing of 20mm bore galvanised steel tubes, medium grade with all fitting and fixed to walls, ceiling, floors complete all as specified and as directed.
Supply and fixing of 20mm bore galvanised steel tubes, medium grade with all fitting and laid in trenches complete all as specified and as directed.
Supply and fixing of 25mm bore galvanised steel tubes, medium grade with all fitting and laid in trenches complete all as specified and as directed. Note for item no 77&80_:- All fitting & fixture such as Bends, Elbows, Tees, Short Pieces, Connectors, Back - Nuts Caps, Plugs, Unions, Flange (core) & flange (ring), reduction Tee, reducing socket, Male & female threaded socket, tank connector, holding clamp shall be provide as per site requiredment as as directed by AGE and same shall deem to be included in quoted rate.
Supply and fixing of Gun metal gate valve with iron wheel head, screwed both ends for iron pipe of 20mm bore
Supply and fixing of Gun metal gate valve with iron wheel head, screwed both ends for iron pipe of 25mm bore
Supply and fixing of 15mm bore stop valve cast copper alloy chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe for union 15mm complete all as specified and directed.
Supply and fixing of bib cock cast copper alloy screwed down with long body with wall flange, and fixed for 15 mm bore GI tube pipe and all accessories complete all as specified and as directed. complete all as specified. Make :- Cat no 280002 of Hindware or equivalent model of make list as given in PS as approved by GE.
Supply and fixing of stop angle valve standard of PTMT any colour high pressure screwed for 15 mm bore dia iron pipe and fixed .(Minimum weight 15mm-90gms) complete all as specified.
Supply and fixing of vitreous china wash basin white flat back, size 550 x 400 mm including CP waste coupling,with GI pipe brackets & , rag bolt in cement concrete/brick wall and including taking down existing HWB and making good wall surface complete all as specified and as directed. Make: Cat no S2040103 wash basin of CERA or equivalent model of make list as given in PS as approved by GE.
Supply and fixing of Vitreous china wash down water closet (pedestal pattern) with concealed S-trap or P-Trap, white, 390 mm high, seat cover including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe etc and including taking down existing one complete all as specified and as directed Mak:-SLICK of HINWARE or equivalent model of make list as given in PS as approved by GE."
Supply and fixing of Vitreous china valveless syphonic action type flushing cistern low level, white with inlet, ball valve, float and handle including brackets complete all as specified and as directed.
Supply and fixing of Vitreous China half stall urinals, white complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, magnum urinal spreader, pointing around urinal back in cement; flush pipe, grating and Union for discharge pipe complete all as specified and as directed.
Supply and fixing as in repair of PVC connections 15 mm size with PTMT nuts of length 600 mm complete all as specified and as directed.
Material and labour for Soap dish chrome plated complete all as specified and as directe
Supply and fixing of chromium plated brass glass shelf fixed with and including chromium plated brass screws and wooden/plastic cleats complete all as specified. Make :- Cat no BEA-47 of Prayag or equivalent model of make list as given in PS as approved by GE.
Supplying, hoisted and fixed in position of rotational moulded polyethylene water storage tanks in double layers and cylindrical vertical type with manhole lids(closed top) of 500 litres capacity with ISI marked and all as specified in IS 12701 and including taking down existing water tank complete all as specified and directed .
Supply and fixing of PVC ball valve for 20 mm dia GI pipe all complete complete all as specified and directed.
Supply and fixing of uPVC of type-B for use in soil and waste discharge systems, single socket, 110 mm bore in any length including rubber ring joints and fixed to walls with clips and other standard material and all as specified in IS 13592 complete all as specified and directed.
Supply and fixing of Unplasticized (uPVC )bend for 110 mm bore uPVC pipe complete all as specified and directed.
Supply and fixing PVC (SWR) floor trap 75 mm, plain with CP grating including joining and solvent cement complete all as specified and directed.
Supply and fixing as in repair of health faucet of ABS body with wall hook and including one metre long stainless steel braided rubber hose pipe fixed on 15 nn dia angle cock all complete complete all as specified and directed Make:- Cat No. BEA-41 Prayag or equivalent model of make list as given in Approved Make list .
Supply and fixing of brass chromium plated superior quality single lever tall boy basin mixer 15 mm dia with 150mm extension body & 600mm long braided hoses complete all as specified and directed. Make :- Cat no F280009 of Hindware or equivalent model of make list as given in Approved Make list .
Supply and fixing of Toilet paper holder chrome plated complete all as specified and directed. Make Cat no AKP 35753PS of Jaquar or equivalent model of Kohler/Grohe/ROCA
Supply and fixing of Towel shelf/rack chrome plated 24’’ long complete all as specified and directed. Make Cat no CAN-1581H of Jaquar equivalent model of make list as given in PS
Cutting into existing manhole for connecting new drain, making good to pipe & rendering, cutting out existing benching for and forming branch channel (half round or 3/4 section) in cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate for 150 mm bore pipe complete all as specified and directed.
Supply, laying and testing of Reinforced Cement Concrete pipe of 150 mm dia class NP-2 laid and jointed with collars and tested. complete all as specified and as directed.
Material and labour for cement concrete (1:3:6) type C2 (using 40mm graded stone aggregate) as in concrete bed to drain pipes 150 mm bore, including packing under and hunching against the sides of pipes after they are laid and tested complete all as specified and as directed. Note:- Thickness of PCC bed 10 cm and width of PCC bed shall be outer dia of pipe plus 30 cm.
Material and labour for Brick work using bricks class designation 75, old size, laid on edge in floors, bedded, jointed in cement mortar 1:6 and pointed in cement mortar 1:3.complete all as specified and as directed.
Material and labour for Brick work using bricks class designation 75, old size, laid flat in floors, bedded, jointed in cement mortar 1:6 and pointed in cement mortar 1:6.complete all as specified and as directed.
Supply and fixing of two track framed wk of Fe 410 Gde 250A as in doors or gates of angles or other section with guesset plate, rails braces etc complete, drilled for fixing of steel sheeting or other covering, doors etc to be prepared of hanging or sliding with and including either hooks, rollers and hinges or steel hanging door fitting etc and fixing complete all as specified & directed
Supply and fixing of friction less stainless steel roller sutaible for 4mx 3m sliding boards complete all as specified & directed complete all as specified & directed
Subtotal of Sch A part-I
SCHEDULE 'A' PART - II FOR E/M PORTION (Sl No __ to ____)
Material and labour for point wiring with 1.5 Sq. mm (nominal area) PVC insulated and sheathed single core FRLSHcopper cable 1100 volts grade with stranded copper conductor in and including PVC rigid concealed conduit (heavy grade) and conduit accessories alongwith continuous earth wire 1.5 Sq mm PVC insulated and sheathed single core FRLSH cable 1100 volts grade with stranded copper conductor and connected to common earth dolly complete for one light/fan point controlled by one switch complete all as specified and as directed.
Material and labour for Point wiring with 1.5 Sq. mm (nominal area) PVC insulated and sheathed single core FRLSHcopper cable 1100 volts grade with stranded copper conductor in and including PVC rigid concealed conduit (heavy grade) and conduit accessories alongwith continuous earth wire 1.5 Sq mm PVC insulated and sheathed single core FRLSH cable 1100 volts grade with stranded copper conductor and connected to common earth dolly complete for modular one socket outlet 5 pin 6 amps on independent board complete all as specified and as directed.
Material and labour for Point wiring with 1.5 Sq. mm (nominal area) PVC insulated and sheathed single core FRLSH copper cable 1100 volts grade with stranded copper conductor in and including PVC rigid concealed conduit (heavy grade) and conduit accessories alongwith continuous earth wire 1.5 Sq mm PVC insulated and sheathed single core FRLSH cable 1100 volts grade with stranded copper conductor and connected to common earth dolly for one 5 amps socket outlet on same board with other switch complete all as specified and as directed.
Materials and Labour for Point wiring with4.00 Sq. mm (nominal area) PVC insulated and sheathed single core FRLSHcopper cable 1100 volts grade with stranded copper conductor in and including PVC rigid concealed conduit (heavy grade) and conduit accessories alongwith continuous earth wire 4.00 Sq mm PVC insulated and sheathed single core FRLSH cable 1100 volts grade with stranded copper conductor and connected to common earth dolly complete for modular one socket outlet 5 pin 16 amps on independent board complete all as specified and as directed. NOTES FOR ITEM NO 113 to 115-(a) Flush steel terminal box, inner plate and front plates shall be measured and paid seperately. (b)Cutting chases and making good in walls shall be deemed to be included in the unit rate.
Material and labour for Metal flush box 2 modular complete all as specified and as directed.
Material and labour for Metal flush box 3 modular complete all as specified and as directed.
Material and labour for Metal flush box 4 modular complete all as specified and as directed.
Material and labour for Metal flush box 6 modular complete all as specified and as directed.
Material and labour for Metal flush box 8 modular complete all as specified and as directed.
Material and labour for White cover plate with frame (both ineer plate & outer plate cover) ,2 modular complete all as specified and as directed.
Material and labour for White cover plate with frame (both ineer plate & outer plate cover) ,3 modular complete all as specified and as directed.
Material and labour for White cover plate with frame (both ineer plate & outer plate cover) , 4 modular complete all as specified and as directed.
Material and labour for White cover plate with frame (both ineer plate & outer plate cover) , 6 modular complete all as specified and as directed.
Material and labour for White cover plate with frame (both ineer plate & outer plate cover) , 8 modular complete all as specified and as directed.
Material and labour for Modular switch 6 Amp single pole one way complete all as specified and as directed.
Material and labour for Modular switch 16 Amp single pole one way complete all as specified and as directed.
Material and labour for Modular socket 16/6 Amp 3 pin combined shattered complete all as specified and as directed.
Material and labour for Modular socket 6 Amp 2/3 pin combined shattered complete all as specified and as directed.
Material and labour for Blanking plate SP with incoming contact complete all as specified and as directed.
Supply and fixing in repair of bell multi music type AC, 230 volts complete all as specified and as directed.
Supply and fixing in repair modular type bell push flush type 5 Amps complete all as specified and as directed.
Supply and fixing ceiling rose surface bakelite 65x50mm three terminals complete all as specified and as directed.
Supply and fixing of MCB protected power unit for Air conditioner with MCB double pole 16-32 Amp, Starter Unit 16-32 Amp and socket 16-32Amp with plug top including taking out of old metal plug socket complete all as specified and directed Make: Cat No DHDUCDP025301625 of Havells or equivalent model of approved make given in PS approved by GE
Supply and fixing in repairs of LED surface/ceiling mounting(suspended from ceiling) box type light fitting 10Watt with LED Lamp , drive and made of epoxy powder coated extruded aluminium channel housing with high quality polycarbonate opal diffuser cover & high power LED’s as light source with 110 Lumen per watt (Minimum) and including all other standard accessories as per manufacture instructions ,internally pre-wired including connecting up three core1.00sq. Mm copper conductor flexible wire/cable complete all as specified. Make : Model No 13 Picture light 31403 corded of Philips or equivalent model of make list as given in PS as approved by GE.
Supply and fixing round shape 15 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete complete all as specified. Make : Model No LSDEP-15-CDL.of Crompton/ BGSLO SLEEK 15 W WH SQ of Bajaj or equivalent model of make list as given in PS as approved by GE.
Supply & Fixing of LED street light fitting ( Building Security light) of 35Watt with LED lamp’s & driver and made of pressure die-cast aluminum housing, IP 65/IP 66 road way luminaries with UV stabilized polycarbonate cover or toughen glass cover & high power LED’s as light source with 110 Lumen per watt and electronic driver with efficiency > 85% . The light fitting shall be fixed on wall/pole with and including 25 mm dia( or higher size as per manufacturers recommendation) light grade GI pipe (bend to shape or as per manufacturers recommendation ) bracket 1.5 mtr long complete with MS flat iron clamp (clamps shall be 40 x 5 mm MS flat) nuts, bolts & washers including painting the clamps with two coat of aluminium paint over a coat of red oxide primer and including taking up old light fitting complete all as specified and as directed Make:- Model No- TRP-400-35-57-SL-LM-NSR of Crompton Greave/ NXT P 36L WH CR PC SD of Bajaj or equivalent model of make list as given in PS. Notes : GI pipe bracket and clamps shall be deem to be included above quoted rate..
Supply and Fixing exhust fan 240V, 300mm sweep, 900 RPM , MS body, highly efficient heavy duty motor with pressure die cast aluminium rotor mounted on two ball bearings and conforming to IS: 2312 and including aluminium lowers and shutters fixed to wall , writing the MES fan numbers with paint and 0.75 Sqmm , 3 core PVC insulated Flexible copper cable for connection from ceiling rose to fan complete all as specified and as directed.
Supply and Fixing of wall fan 240V, 400mm sweep, 1200 RPM , highly efficient heavy duty motor with pressure die cast aluminium rotor mounted on two ball bearings and conforming to IS: 2312 and including aluminium louver and shutters fixed to wall , writing the MES fan numbers with paint and 0.75 Sqmm , 3 core PVC insulated Flexible copper cable for connection complete all as specified and as directed.
Supply and fixing of sheet metal enclosure for MCBs to be used singal pole & nutral double door 8 Way 200 Amps rated busbar and including fixed with 25mm x 6 mm mild steel clamp of suitable length complete all as specified and as directed.
Supply and fixing of sheet metal enclosure for MCBs to be used triple pole & nutral double door 12Way 200 Amps rated busbar and including fixed with 25mm x 6 mm mild steel clamp of suitable length nd including taking out old DB complete all as specified and as directed.
Supply and fixing MCB four pole 40 to 63 amps 415 volts 10KA breaking capacity.
Supply and fixing of MCB SP of rating 6 to 32 Amps 240 V complete all as specified and as directed.
Supply and fixing MCB DP 40 to 63 amps 415 volts 10KA breaking capacity complete all as specified and as directed.
Supply and fixing of sub main wiring with two single core 4.0sqmm (nominal area) PVC insulated copper conductor FRLSH, multi stranded, unsheathed 1100 volts grade IS-694 marked in PVC rigid concealed conduit (heavy grade) and accessories accessories including one single core 4.0 sqmm copper conductor cable FRLSH as earth wire and including taking out old sub-main wiring complete all as specified and as directed. NOTE:- (a) All runs of copper conductor and one run of conduit shall be measured as one run length. (b)Cutting chases and making good in walls shall be deemed to be included in the unit rate.
Supply and fixing of sub main wiring with two single core 6.0sqmm (nominal area) PVC insulated copper conductor FRLSH, multi stranded, unsheathed 1100 volts grade IS-694 marked in PVC rigid concealed conduit (heavy grade) and accessories accessories including one single core 6.0 sqmm copper conductor cable FRLSH as earth wire and including taking out old sub-main wiring complete all as specified and as directed. NOTE:- (a) All runs of copper conductor and one run of conduit shall be measured as one run length. (b)Cutting chases and making good in walls shall be deemed to be included in the unit rate.
Material and labour for Sand cushioning to the full width of trenches for protection of cables including punning down complete all as specified and as directed. Note :- Thickness of sand cushioning shall be the thickness after punning down.
Material and labour for laying of Class designation 75 bricks, old size, flat, common clay laid in trenches across the trench as cable protection complete all as specified and as directed.
Material and labour for laying of LT XLPE insulated armoured heavy duty cable 1100 volt grade ISI marked with alumimium conductor multi strand cross sectional area 50 Sqmm x 3 1/2 Core complete all as specified and as directed.
Material & Labour for earthing with galvanised steel earth plate electrode of size 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25m deep below the ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to the galvanised earth lead by means of bolts, nuts check nuts and washers of galvanised iron using GI 4 mm dia wire as earthing lead as shown in electrical plate No. 3 of SSR Part-I connected to earthing test point all as specified or indicated including testing on completion including necessary excavation and earth work in soft/loose soil, returning filling, disposal of surplus soil, earth pit in PCC 1:3:6 type C-1 using 20mm graded stone aggregate pit, funnel, 20mm dia GI medium grade watering pipe, 40mm dia GI medium grade earth lead protection pipe, CI frame and cover, wire, copper lugs etc mesh, chorcoal and common salt in alternatee layer complete all as specified and directed .
Supply, installation, testing and commissioning of factory made powder coated (CPRI approved) outdoor type, dust & vermin proof feeder pillar box made out of 3.15mm CRCA steel sheet of suitable size and angle iron 40 mm x 40mm x 6 mm , powder coated over one coat of red oxide primer suitably grouted in PCC-M10 using 20 mm graded stone aggregate including bus bar, internal wiring with PVC insulated single core cables of copper conductor of suitable size duly numbered with tags for the circuits with hinged double door shutters (front & rear), cubical type locking arrangement and slanted roof. The size of panel boards shall be suitable for housing the accessories given here under and also suitable for operation on AC 415 Volt, 3 phase, 50 Hz supply system including disconnecting of electric connection both incoming & out going from existing unsv indoor/outdoor feeder pillar boxes/busbar enclosers and unsv accessories and taking out panel from the foundation . The panel board shall comprise of following items & all specified in SSR Part-I clause no 19.21 and all as shown on drawing .
Note: Schedule of credit (SCHEDULE OF CREDIT) amount of Rs ₹ ___________ mentioned on Page No ____ shall be deducted from the total quoted amount of BOQ.
M/S PAUL CONSTRUCTION
M/S BARUAH ELECTRICALS
M/S BARUA REFRIGERATION WORKS
THE SUPPLY AGENCY
M/S RK SAHA AND CO
M/S DHAR AND DHAR
SURAJIT GOGOI
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .