Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹8.8 LAccepted-AOC | ₹8.8 L Quoted ₹9.1 L | 1 | Accepted-AOC L1 |
| 2 | 2₹9.8 L+₹69,880 (7.70%)Rejected-AOC 12 DORU DOORU VERINAG ROAD NEAR TOWN HALL ANANTHNAG JAMMU KASHMIR 192211 | ANANTNAG | JAMMU AND KASHMIR | 192211 | ₹9.8 L+₹69,880 (7.70%) | 2 | Rejected-AOC L2 |
| 3 | 3₹10.7 L+₹1.6 L (18.1%)Rejected-AOC 101 VRAJ APARTMENT OPP POLICE HEAD QUARTERS SARU SECTION ROAD JAMNAGAR 381008 | JAMNAGAR | 381008 | ₹10.7 L+₹1.6 L (18.1%) | 3 | Rejected-AOC L3 |
| 4 | Rejected-Technical SAIDAKADAL SRINAGAR KASHMIR | SRINAGAR | JAMMU AND KASHMIR | 190001 | - | - | Rejected-Technical Adverse remark in WLR |
Tender Value
₹8 L
EMD Value
₹16,000
Closing Date
30 Apr 2019, 12:00 pmClosed
GE KHUMBATHANG
GE KHUMBATHANG C/O 56 APO PIN-900270
REPAIR AND MAINT TO SECURITY FENCING , GATES, HARDSTANDING, PATHS AND DRAINS ETC AT BIAMAH, BATALIK, ACHINATHANG, HANUTHANG, KHALTSI, AND LAMAYURU AREA UNDER AGE B/R-II , GE KHUMBATHANG
2019_MES_245730_1
GE/KHU-07/2019-20
Open Tender
Civil Works
Item Rate
180 days
KHALTSI
AS PER TENDER DOCUMENTS
7 documents required · 7 mandatory
₹500
GE KHUMBATHANG
₹16,000
Yes
15 Feb 2020
11 Apr 2019
1 May 2019
11 Apr 2019
30 Apr 2019
25 Apr 2019
Amount
Dismantling old posts or struts ( wood, steel or RCC) any section, including taking out embedded portion including necessary excavation & prepration of post holes and removal of surplus excavated material from site complete all as specified and directed.
M&L for Cement Concrete type D-2, 1:4:8 using 40mm graded agregate as in foundations, filling and mass concrete complete all as specified and directed.
M&L for mild steel angle, flat iron as in post & strut including cutting tops to shape, drilling holes, notching for wire and nosing to steps including embeding in concrete etc or similar work conforming to Fe 290 Gde 165 including erection in ground complete all as specified and directed.
Labour only for fixing old dismantled steel posts / struts including embeding in concrete etc complete all as specified and directed.
S&F mild steel bolts of any size with hexagonal or square head at one end and screwed at the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut complete all as specified and directed.
Dismantling old fencing/wire mesh any type complete all as specified and directed.
S&F MS Galvanized chain link fencing of any size any type confirming to relevent IS including line wires, any mesh, size and type, fixed to any type of standards, rails, straining bolts etc including provision of binding wire complete all as specified and directed.
Fixing only old dismantled chain link fencing includiing line wires, any mesh size and type to any type of standards, rails, straining bolts, etc including provision of binding wire complete all as specifierd and directed .
S&F in repair Galvanised 2 strand steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacings and straining and fixing to any of standard rails straining bolts including, securing or tying at crossings with and provision of galvanised mild steel wire staples or steel pins, etc and each line wire to be measured seperatly complete all as specifted and directed.
Labour only for re-staining/resecuring existing barbered wire including making good staples etc or provideing new staples or binding wire complete all as spcified and directed.
M&L for two coat of synthetic enamel paint (finishing coat) over one coat of primer to new steel surfaces of any description over 10 cm width or girth incl prepration of surfaces complete all as specified & directed.
M&L for preparation of old Steel/Iron surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
Dismantling mild steel work of any description not otherwise provided for complete all as specified and directed.
M&L for Framed work such as in door frame, door shuters / gate of angel, flat Iron, plates or other section incl preparation for fixing of steel sheeting or other convering doors to be prepared for hanging including hinges, hold fast , handles , locking arrangement and all necessary required fittings of Fe 410-W (Gde E-250 quality - B) etc complete all as specified.
Demolition of precast concrete block masonry work built in cement mortar or cement lime motar completed all as specified and directed.
M&L precast cement concrete block masonry type C1(1:3:6) using 20 mm graded aggregate with solid block, Exc 10 Cm in width and setting in cement mortar 1:6 complete all as specified and directed.
M&L cement conc type B-0 (1:2:4 using 12.5mm graded aggregate) as in kerbs or mud stops rounded or chamfered on edge, cills , blocks for holdfast , copings etc complete all as specified and directed..
Taking down cement or cement lime plaster of any description on brick or stone walls, etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.
M&L for 15mm thick plastering/rendering on brick work on concrete surfaces in cement mortar (1:4) incl finishing surfaces even and smooth without using extra cement complete all as specified and directed.
M&L for plain cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in surface channels and drains complete all as specified and directed.
Demolition of un-reinforced cement concrete in ground floors and pavings not exceeding 15 cm thick (below or above ground level) complete all as specified and directed.
M&L for 60mm thick machine pressed precast concrete interlocking pawer blocks of any shape and size of M-35 grade confirming to IS 15658 - 2006 filled with grey cement and pigment and laid over 25mm thick sand cushioning complete all as specified and directed.
M&L coloured chequered cement concrete tiles of size 300x 300x 25 mm thick laid over 20 mm thick screed bed in CM 1:6 bedded and jointed in neat cement slurry complete all as specified and directed.
M&L for 75 mm thick cement concrete type D-2 1:4:8 (40mm graded aggregate) as in sub base to floor or for laying of floor finishes or similar works complete all as specified and directed.
M&L for forming 12mm thick Expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade 'A' incl provision of 20mm dia mild steel dowal bars 50 cm long complete all as specified and directed.
M&L for forming Contraction (Dummy) joints 65mm deep x 10 mm wide, filled with sealing compound, Grade 'A' complete all as specified and directed.
M&L for Hardcore of gauge n exc 63mm deposited, spread and levelled in layers n.exc 15 cm thick, watered and rammed to a levelled surface using broken stone or boulder complete all as specified and directed.
M&L 150 mm thick Cement concrete work type B-1 (1:2:4) (using 20mm graded aggregate) for pavement/ hard -standing and flooring or similar works including necessary form work complete all as specified and directed.
M&L for preparation of new plastered or unplastered surfaces of walls, pillars, cornices by brooming down etc and applying two coat of cement base paint complete all as specified and directed
Deduct Credit for Demolished/ Dismantled material Rs. (-) 30500.00 (Minus) as listed in Schedule 'A' Part-II (Credit Schedule) Note: Tenderers will not quote against this item being a tentative amount to be considered to arrived at the 'Contract Sum'
M/S ALI MOHD AND SONS
M/S SK TRADERS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .