Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹29.1 LAccepted-Finance | L1 | Accepted-Finance Being L1 | |
| 2 | L2₹29.1 L+₹7,753.52 (0.27%)Rejected-Finance | L2 | Rejected-Finance Being L2 | |
| 3 | L3₹32.2 L+₹3.1 L (10.8%)Rejected-Finance VPO MAJOD TEHSIL HANSI DISTRICT HISAR 125049 HARYANA | HISAR | HISAR | HARYANA | 125049 | L3 | Rejected-Finance Being L3 | |
| 4 | L4₹32.3 L+₹3.3 L (11.2%)Rejected-Finance | L4 | Rejected-Finance Being L4 | |
| 5 | L5₹33.5 L+₹4.4 L (15.2%)Rejected-Finance H NO 920 SEC 16 17 HISAR HARYANA 125005 | HISAR | HISAR | HARYANA | 125005 | L5 | Rejected-Finance Being L5 |
| Sl No | Description | Qty | Unit | Shiva Constructin Co. L2 | Siya constructions L7 | Balaji Construction Co. L6 | AJAY INFRASTRUCTURE L4 | VIKAS INFRASTRUCTURE L3 | NAVIN KUMAR L8 | SHRI HARI BUILDERS L5 | S K BUILDERS L1 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Taking down chowkats or frame with shutter, without taking off shutter from the frames not exc 1.5 Sqm each and making good the hold fast notch / disturbed portion with PCC 1:3:6 type C1 (20mm graded aggregates) and making good the plaster of wall in CM 1:6 complete all as specified and directed. | 10 | Each | 36 ₹360 Lowest | 100 ₹1,000 | 40 ₹400 | 100 ₹1,000 | 100 ₹1,000 | 60 ₹600 | 51 ₹510 | 40 ₹400 |
| 2.00 | Taking down chowkats or frame with shutter, without taking off shutter from the frames area exc 1.5 sqm but not exc 4sqm each and making good the hold fast notch / disturbed portion with PCC 1:3:6 type C1 (20mm graded aggregates) and making good the plaster of wall in CM 1:6 complete all as specified and directed. | 33 | Each | 36 ₹1,188 Lowest | 150 ₹4,950 | 50 ₹1,650 | 50 ₹1,650 | 50 ₹1,650 | 60 ₹1,980 | 59 ₹1,947 | 40 ₹1,320 |
| 3.00 | S&F in repair Floor door stopper of aluminium alloy body 150 mm longbrass body and tongue with hard drawn steel spring with rubber shoes, complete all as specified and directed. | 21 | Each | 66 ₹1,386 | 70 ₹1,470 | 80 ₹1,680 | 120 ₹2,520 | 120 ₹2,520 | 60 ₹1,260 Lowest | 80 ₹1,680 | 100 ₹2,100 |
| 4.00 | S&F for pressed steel frames of size 125 X 60 mm with one or more rebates including necessary fixing lugs, butt hinges, locks strike plate etc(thickness of sheet shall be 1.25mm) and filling PCC 1:3:6 type C1 (20mm graded aggregates) in chowkhats and frames and making good the plaster of wall in CM 1:6 complete all as specified and directed. | 30.6 | RM | 566 ₹17,319.6 | 477 ₹14,596.2 | 500 ₹15,300 | 475 ₹14,535 Lowest | 575 ₹17,595 | 500 ₹15,300 | 500 ₹15,300 | 480 ₹14,688 |
| 5.00 | S&F for pressed steel frames of size 105 X 60 mm with one or more rebates including necessary fixing lugs, butt hinges, locks strike plate etc(thickness of sheet shall be 1.25mm) and filling PCC 1:3:6 type C1 (20mm graded aggregates) in chowkhats and frames and making good the plaster of wall in CM 1:6 complete all as specified and directed. | 21 | RM | 396 ₹8,316 Lowest | 477 ₹10,017 | 450 ₹9,450 | 450 ₹9,450 | 525 ₹11,025 | 500 ₹10,500 | 480 ₹10,080 | 450 ₹9,450 |
| 6.00 | M&L 35mm thick factory made plain, framed, paneled door shutters kiln seasoned and chemically pressure treated second class, hardwood (two panels) with lock rail and panel of 9mm thick BWP commercial marine grade ply wood bonded with high quality liquid phenol formal dehyde synthetic resin adhesive confirming to IS-710. The size of rails and style shall be as per IS-1003. The shutter shall be fitted to chowkhats complete all as specified and directed. | 19.2 | Sqm | 1,966 ₹37,747.2 | 1,877 ₹36,038.4 | 1,900 ₹36,480 | 2,200 ₹42,240 | 2,600 ₹49,920 | 1,800 ₹34,560 | 1,700 ₹32,640 | 1,600 ₹30,720 Lowest |
| 7.00 | M&L 35mm Glazed and skeleton shutters second class hard wood , open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters complete all as specified and directed. | 11.52 | Sqm | 1,966 ₹22,648.32 | 1,877 ₹21,623.04 | 1,900 ₹21,888 | 2,100 ₹24,192 | 2,500 ₹28,800 | 1,800 ₹20,736 | 1,700 ₹19,584 | 1,600 ₹18,432 Lowest |
| 8.00 | M&L for Preparing new wooden surfaces of any description exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. | 69.12 | Sqm | 56 ₹3,870.72 | 87 ₹6,013.44 | 50 ₹3,456 | 65 ₹4,492.8 | 65 ₹4,492.8 | 50 ₹3,456 | 50 ₹3,456 | 40 ₹2,764.8 Lowest |
| 9.00 | S&F 150 mm long aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed. | 39 | Each | 66 ₹2,574 | 65 ₹2,535 | 60 ₹2,340 | 55 ₹2,145 | 65 ₹2,535 | 60 ₹2,340 | 40 ₹1,560 Lowest | 40 ₹1,560 Lowest |
| 10.00 | S&F aluminium alloy anodised sliding door bolt with hasp & staple (bolt type) and fixing clip of sheet,cast or extruded section, bolt not less than 16 mm dia, 300 mm long complete all as specified and directed. | 10 | Each | 66 ₹660 Lowest | 300 ₹3,000 | 250 ₹2,500 | 300 ₹3,000 | 300 ₹3,000 | 300 ₹3,000 | 300 ₹3,000 | 200 ₹2,000 |
Tender Value
₹38.4 L
EMD Value
₹76.9 L
Closing Date
7 Oct 2026, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (W)
GE (W) HISAR AT HISAR MIL STN
CA NO GE (W)/HSR-34/2026-27 SPL REPAIR IN BLDG NO T-207 AND T-206 AND BLDG NO P-283 UNDER GE (W) HISAR AT HISAR MIL STN
2026_MES_788446_1
CA NO GE (W)/HSR-34/2026-27
Open Tender
Civil Works
Item Rate
180 days
HISAR
Please refer tender document
7 documents required · 7 mandatory
₹500
Yes
GE (W) HISAR
₹76.9 L
GE (W) HISAR
30 Oct 2026
9 Sept 2026
10 Oct 2026
9 Sept 2026
7 Oct 2026
23 Sept 2026
10 Sept 2026 - 17 Sept 2026
17 Sept 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Taking down chowkats or frame with shutter, without taking off shutter from the frames not exc 1.5 Sqm each and making good the hold fast notch / disturbed portion with PCC 1:3:6 type C1 (20mm graded aggregates) and making good the plaster of wall in CM 1:6 complete all as specified and directed. | 10 | Each | - | - |
| 2 | Taking down chowkats or frame with shutter, without taking off shutter from the frames area exc 1.5 sqm but not exc 4sqm each and making good the hold fast notch / disturbed portion with PCC 1:3:6 type C1 (20mm graded aggregates) and making good the plaster of wall in CM 1:6 complete all as specified and directed. | 33 | Each | - | - |
| 3 | S&F in repair Floor door stopper of aluminium alloy body 150 mm longbrass body and tongue with hard drawn steel spring with rubber shoes, complete all as specified and directed. | 21 | Each | - | - |
| 4 | S&F for pressed steel frames of size 125 X 60 mm with one or more rebates including necessary fixing lugs, butt hinges, locks strike plate etc(thickness of sheet shall be 1.25mm) and filling PCC 1:3:6 type C1 (20mm graded aggregates) in chowkhats and frames and making good the plaster of wall in CM 1:6 complete all as specified and directed. | 30.6 | RM | - | - |
| 5 | S&F for pressed steel frames of size 105 X 60 mm with one or more rebates including necessary fixing lugs, butt hinges, locks strike plate etc(thickness of sheet shall be 1.25mm) and filling PCC 1:3:6 type C1 (20mm graded aggregates) in chowkhats and frames and making good the plaster of wall in CM 1:6 complete all as specified and directed. | 21 | RM | - | - |
| 6 | M&L 35mm thick factory made plain, framed, paneled door shutters kiln seasoned and chemically pressure treated second class, hardwood (two panels) with lock rail and panel of 9mm thick BWP commercial marine grade ply wood bonded with high quality liquid phenol formal dehyde synthetic resin adhesive confirming to IS-710. The size of rails and style shall be as per IS-1003. The shutter shall be fitted to chowkhats complete all as specified and directed. | 19.2 | Sqm | - | - |
| 7 | M&L 35mm Glazed and skeleton shutters second class hard wood , open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters complete all as specified and directed. | 11.52 | Sqm | - | - |
| 8 | M&L for Preparing new wooden surfaces of any description exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. | 69.12 | Sqm | - | - |
| 9 | S&F 150 mm long aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed. | 39 | Each | - | - |
| 10 | S&F aluminium alloy anodised sliding door bolt with hasp & staple (bolt type) and fixing clip of sheet,cast or extruded section, bolt not less than 16 mm dia, 300 mm long complete all as specified and directed. | 10 | Each | - | - |
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 2.35 MB
BOQ_883760.xls
BOQ • 16.12 MB
TenderDocument34.pdf
Tender Documents • 11.01 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .