8932/E8

Amount

Dismantling of old barbed wire of any description from RCC / MS fencing post complete all as specified and directed.

Dismantling of old MS seccon concertina coil of any description from RCC / MS fencing post complete all as specified and directed.

Dismantling structural steel work including door gates etc but excluding framed truss etc. complete all as specified and directed.

Demolition of brick work built in cement mortar complete all as specified and as directed.

M&L for removing mortar from and cleaning brricks,stacking for measurement including all extra handling and removal and disposing off rubbish complete all as specified and as directed.

Demolition of PCC of any description and in any position not otherwise specifaclly provided for coping and rubbish off the premises complete all as specified and directed.

Excavating in trenches n. exc. 1.5 m. wide and n. exc. 1.5 m. in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pire holes, etc. n. exc. 10 sqm on plan and not exc. 1.5 m. in depth and getting out in soft/loose soil complete all as specified and as directed.

Returning filling including spreading levelling, watering and well ramming in layers not exceeding 25 cm in soft/loose soil complete all as specified and as directed.

Removing excavated soil not exc 50 mtr and depositing where directed at a level not exc 1.5 mtr above the starting point in soil complete all as specified and as directed.

M&L PCC 1:4:8 type D2 type (using 40 mm graded crushed stone aggregate) as in foundation filling and mass concrete etc complete all as specified and directed.

M&L reinforced cement concrete 1:2:4 Type B1 (using 20 mm graded crushed stone aggregate) as in foundation, plinth beams, base of column, footing and mass concrete etc. complete all as specified and directed.

M&L reinforced cement concrete 1:2:4 Type B1 (using 20 mm graded crushed stone aggregate) as in columns, pillars, piers posts and struts etc. complete all as specified and directed.

M&L reinforced cement concrete 1:2:4 Type B1 (using 20 mm graded crushed stone aggregate) as in beams, cantilevers, bressummers, lintel over 1.5 m span complete all as specified and directed.

Use and waste form work to side of concrete foundation, footings, bases of columns, raft and beams and similar work, vertical or to batter as in rough finished surfaces of concrete all as specified and directed.

Use and waste of form work to sides of pillars, posts, struts, piers, columns etc. square, rectangular or polygonal section as in fair finished surfaces complete all as specified and directed.

Use and waste of form work to sides and soffits of floor or roof beams, lintels, over 1.5 m span, cantilevers, shelves including supports, overhangs etc. complete all as specified and directed as in flat and fair finished surfaces complete all as specified and directed.

M&L MS TMT bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia as reinforcement complete all as specified and directed.

M&L M.S. TMT bars 5 mm dia and over, cut to length, bent to shape required including cranking, bending, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia as in stirrups spaces, binders and nibs etc. complete all as specified and directed.

M&L brick work with fly ash bricks old size straight or curved in plan exc 6 mtr mean radius built in CM (1:6) using old size bricks complete all as specified and as directed.

M&L M.S. TMT bars 8 mm dia incorporating in brick work anchoring with columns complete all as specified and directed.

M&L for 15 mm thick rendering on brick or concrete surfaces of wall in CM 1:4 and finished even and smooth without using extra cement complete all as directed.

M&L preparation of newly plastered surfaces of work and applying two coats of weather coat paint over a coat of primer all as specified and directed.

S&F mild steel work including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

S&F 110 mm dia PVC (SWR) pipes single, socketed, in any length as in weep holes complete all as specified and directed .

S&F galvanised 2 strand, steel barbed wire 2.24 mm dia, barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails, straining bolts including securing or tying at crossing with provision of galvanised mild steel wire, stapples or steel pin etc. as directed complete all as specified and directed (each line to be measured).

S&F MS seccon concertina coil 750 mm dia (before stretching) with 10 -12 stands of SRPBT wire of minimum dia 2.59 mm, tensile strength of 1620 N/sqmm with anticorrosive mint green paint conforming IS-513DD grade & IS-4454 part-I/1981 grade-II, for respective materials of razor strip & core wire and all fixing arrangements as per manufactures instruction for fixing & erection complete all as specified and as directed.

Removing curb stone and edge stone without breaking, stack aside for reset and laid dry at the same place after returning filling,watering and well ramming beside the wall and filling the joint with grey cement slurry complete all as specified and directed.

M&L preparation of new or previously untreated steel and iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of zinc chrome primer complete all as specified and directed.

R R ENTERPRISE