REPAIR/MAINT OF PATH, BOUNDARY WALL, FENCING AND GATE IN DOMESTIC AREA OF BR I AND PERIODICAL SERVICES AS PER NEW COLOUR SCHEME IN DOMESTIC AREA OF BR II AT AF STN GORAKHPUR

Amount

Demolition of cement concrete un- reinforced of any description and in any position not otherwise specifically provided for, complete all as specified and directed at site.

M&L 75mm thick cement concrete 1:4:8 type D2 using 40mm graded stone aggregate as in sub base, complete all as specified and directed at site.

M&L for screed bed or beding layer of mortar 20mm thick in cement mortar 1:4 for laying floor finishes, complete all as specified and directed at site.

M&L Chequered cement concrete tiles with grey cement & pigment 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors , complete all as specified and directed at site.

M&L 100mm thick cement concrete 1:4:8 type D2 using 40mm graded stone aggregate as in sub base, complete all as specified and directed at site.

M&L for sand cushioning layer under the floors and hand level surface including watering and consolidation to receive floor tiles, complete all as specified and directed at site.

M&L for Machine pressed precast concrete interlocking paver block vibro compacted rubber moulded with grey cement and pigment any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 Grade complete all as specified and directed by Engr-in-Charge.

M&L 100mm thick PCC 1:2:4 type B-1, using 20mm graded stone aggregate as in hard standing finished even and smooth without using extra cement including spike rolling to surface or making impression of expanded metal whilst the concrete is green, complete all as specified and directed at site.

M&L for 75mm thick cement concrete type C2 1:3:6 using 40 mm graded stone aggregate as in plinth protection including finishing cement concrete surfaces even and smooth without using extra cement, complete all as specified and directed at site.

M&L for Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound, Grade 'A' , complete all as specified and directed at site.

Dismantling of structural steel work including doors, gates but excluding framed truss etc complete all as specified and directed.

M&L for Framed work as in doors or gates or grating of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing Fe 410 -W (Gde E- 250) complete complete all as specified and as directed.

M&L preparation of new painted steel surfaces of any description, over 10cm width or girth and apply two coat of synthetic enamel paint over a coat of red oxide complete all as specified and as directed .

Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and directed.

M&L for brick work with subclass 'B' brick straight or curved on plan 6m mean radious built in CM (1:4) etc, complete all as specified and directed at site.

M&L for providing cement concrete type C1 1:3:6 (20mm graded aggregate) as in copings, complete all as specified and directed at site.

M&L for rendering 15mm thick Cement plaster with (1:4) cement mortar on fair faces of brick wall and finished ,even & Smooth(without using extra cement) , complete all as specified and directed at site.

M&L for preparation of new or previously untreated brick or concrete surfaces applying two coats of exterior emulsion weather coat on surfaces of any description complete all as specified and directed.

Dismantling chain link fencing of any description complete all as specified and directed by Engineer-in-Charge.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm soft and loose soil , complete all as specified and directed at site.

M & L for removing excavated soils n exc. 50m and depositing where directed at a level n exc. 1.5m above the starting point complete all as specified and as directed by the Engineer-in-Charge.

M & L for PCC 1:3:6 Type C2 using 40 mm graded aggregate as in walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases) , complete all as specified and directed at site.

S&F in repair MS Posts and struts in fencing (any size of angle) mm including cutting tops to shapes as directed including driling holes for bolting of MS flat iron in horizontal, vertical & diagnal faces of each pannel to be intertwined with Chain link fencing, and fixed to posts with MS nut bolts and washers ,wind ties for sign board posts and struts, and similar work confirming to Fe 290 Gde E-165 , complete all as specified and directed at site.

S&F MS nut and bolt of dia 11 to 15 mm and length of bolt exc 5 cm and n exc 10 cm (Machine made) with hexagonal or square head at one end and screwed other with washer out of shank, complete all as specified and directed at site.

Fixing only chain link M S galvanised fencing (IS-272) mesh as required but weight of mesh not exc 4.0 kg/sqm complete all as specified and directed.

Supply only chain link MS galvanised fencing any size or type complete all as spd &directed.( weight of chain link shall be decided through a B.O.O)

S&F Mild steel round bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, ooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips.

S&F in repairs Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc including raking out joints, hacking for key scrubbing down with water etc , complete all as specified and directed at site.

Supply only interrgal Water proofing compound ISI marked , complete all as specified and directed at site.

M&L for 15mm thick rendering in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement , complete all as specified and directed at site.

M&L for preparation of new plastered surfaces and applying two coats of cement base paint as per new colour scheme over a coat of primer and 2 mm thick BIRLA/ JK wall care putty , complete all as specified and directed at site.

M & L for preparation of new plastered surfaces and applying two coat of oil bond distemper over a coat of white cement primer and 2 mm thick BIRLA/ JK wall care putty , complete all as specified and directed at site.

M & L preparation of old plastered surfaces of ceiling and applying one coat of white wash complete all as specifie and directed.

M & L preparing old decorated plastered or unplastered surfaces of wall, pillasters, cornices etc by complete removal of existing treatment by scrapping, washing, rubbing down & stopping etc and applying one coats of exterior emulsion paint over one coat of alkali resistant primer and 2 mm thick BIRLA/ JK wall care putty complete all as specified and as directed.

M & L for complete removal of existing treatment and preparation of surfaces and applying two coat of cement base paint as per new colour scheme over a caot of 2 mm thick Birla/ JK wall care putty , complete all as specified and directed at site.

M & L Complete removal of old treatment and preparation of surfaces and applying two coat of of oid bond distemper over a coat of clharcollle and 2mm thick wall care putty , complete all as specified and directed at site.

M & L preparation of old wooden surfaces and applying one coat of synthetic enamel paint , complete all as specified and directed at site.

M & L for preparation of old painted steel surfaces of any description, over 10 cm in width or girst and applying one coat of syenthetic enamel paint , complete all as specified and directed at site.

M & L for complete removal of old decorated existing treatment surfaces of wall and applying two coat of plastic emulsion paint over a coat of white cement primer and 2 mm thick Birla/JK wall care putyy , complete all as specified and directed at site.

Sheo Prasad

M/S NITISH ASSOCIATES

M/s Pandey Trading Company

M/s Rajmani Engineers

M/S DIVYA TRADERS

M/S PRATAP ENTERPRISES

M/S SHAILZA TRADERS