REPAIRS TO RCC FENCING POST AND BARBED WIRE FENCING IN DEPOT AREA AT CAD PULGAON

Amount

Dismantling posts or struts (wood, steel or R.C.C.) any section embedded in concrete, including taking out embedded portion and making good disturbed ground complete all as specifed and as directed.

M&L for PCC 1:3:6 type C2 (using 40 mm graded stone aggregate) in foundations, filling and mass concrete complete all as specifed and as directed.

M&L for repairs reinforced cement concrete type B-1, 1:2:4 (20 mm graded aggregate) in precast posts, fencing posts, straining or terminal posts, struts etc. for fencing, average sectional area in exc 100 sq cm but n exc 20 sqm, with or without chamfered angles and flat, splayed, rounded or mitred tops as directed and fixed complete all as specifed and as directed.

M&L for mild steel TMT bar 10mm dia and over cut to length bent to shape required including cranking, bending spirally for hooping for columns hooking ends and binding with MS wire (annealed) not less than 0.9mm dia or securing with clips etc complete all as specifed and as directed.

All as per item No. 4.00.. but 5 to 10 mm dia as in stirrups, spacer etc complete all as specified and as directed.

S&F in repairs galvanised 2 strand steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rail with straining bolts,including securing or tying at crossing with and provision of galvanised mild steel wire,staples or steel pins etc complete all as specifed and as directed.

Fixing only in repair galvanised 2 strand steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rail with straining bolts,including securing or tying at crossing with and provision of galvanised mild steel wire,staples or steel pins etc complete all as specifed and as directed.

Dismantling wrought iron or mild steel, angle or similar type of work of any description not otherwise provided for all as per site requirement complete all as specifed and as directed.

S&F Rolled mild steel in Flats, Plates (plain or chequered) channels. Square cut or notched (ordinary and counter sunk) forming holes with riveted, bolted or welded attachment embedded in column/framed work as in fencing posts, struts, nibs, grills, etc., conforming to Fe 410 W (Gde E 250) quality incl cutting tops to shape, drilling holes, notching for wire, etc complete all as specifed and as directed.

M&L for two coats of synthetic enamal paint over a coat of red oxide on new steel surface exceeding 10 cm width or girth including necessary preparation of new steel surface complete all as specifed and as directed.

M&L in repairs walling of random rubble, uncoursed stone masonry well bonded, bedded and solidly hearted built in CM 1:6 etc complete all as specifed and as directed.

All as per item No 11.00…….here in before but except stone complete all as specified and as directed.

M&L in repairs PCC 1:2:4 type B-1 using 20 mm graded aggregates as in PCC coping, bed blocks and similar articles including necessary form work complete all as specifed and as directed.

M&L in repairs for broken glass coping by using broken glass at the rate of 10kg/Sqm fixed over 25mm thick cement mortar 1:3 layer on top of walls etc complete all as specifed and as directed.

M & L for Flush pointing in CM (1:3) to random rubble masonry complete all as specifed and as directed.

M&L in repairs raised pointing to random rubble uncoursed stone masonry in CM 1:4, uncourses or brought upto coursed complete all as specifed and as directed.

Demolition of cement concrete (unreinforced) in ground floor and paving n exc. 15 cm thickness below above ground level complete all as specifed and as directed.

M&L in repairs 75 mm thick PCC 1:4:8 type D2 (Using 40 mm graded stone aggrgate) as in sub base.

M&L in repairs for PCC (1:3:6) type C1 (using 20 mm graded stone aggregate) 75 mm thick as in plinth protection, path including finished even and smooth using extra cement complete all as specifed and as directed.

M&L in repairs for rendering 15 mm thick in CM 1:6 on stone masonry including finishing the surface even and smooth without using extra cement complete all as specifed and as directed.

M and L preparation of newly plaster surface on external wall surfaces and applying two coats of cement base paint over a coat of white cement primer complete all as specified and as directed.

M/s Prakash Agencies

M/s VILAS RATAN MENDHE

M/S Ramakant Chourasia

M/S L M Chourasia

Arnav Enterprises

SHREE CONSTRUCTIONS

Bidder Name

M/S L M Chourasia

Ankit Construction

SHREE CONSTRUCTIONS

M/s VILAS RATAN MENDHE

M/S Ramakant Chourasia

Arnav Enterprises

M/s Prakash Agencies