Works contract for HT/LT line works in East Gobi Sub Division

Amount

Excavation of pole pit upto 27" (8.0 m) Pole by using JCB or manual

Excavation of stay pit 4.5' to 5' depth by using JCB or manual

Excavation of pole pit above 8 mtr Pole by using JCB or manual

Excavation of poles /stay pit hard rock without blasting (where houses are located)

Erection of PSC/RCC poles/Metal poles upto 8.00m. (27') by using JCB or manual

Erection of PSC/RCC poles/Metal poles above 8m by using JCB or maual

Erection of stay set complete

Fixing of HT "V" cross arms(all types) / channel cross arms/guarding Cross arms

Fixing of Tapping channel cross arms

Fixing of LT 3 phase cross arms

Fixing of LT Single phase cross arms

Fixing of HT/LT TI Fittings

Fixing of HT pin Insulators 11 KV

Fixing of HT11 KV strain disc.

Fixing of LT pin Insulator

Fixing of LT shackle

Fixing of Aluminium Knob

Earthing of pole with coil earthing including burying looping and binding.

Paving of conductor,stringing etc.. Complete with ACSR 7/3.35 mm,AAAC 7/3.15 mm.

Paving of conductor,stringing etc.. Complete with ACSR 7/2.59 & AAAC 7/2.50 mm,ACSR 7/2.11 mm conductor

Erection of Transformer Double pole structure complete in all respects with wiring Earthing, fixing of open type fuse units, HT/LT/LAS and jumpering 3 Nos. Earth pits with collar including painting of metal parts, structure poles, fixing of top channel seating channel, belting angle including concreting (Except erection of Transformer)

Erection of Single pole Transformer structure complete in all respects with wiring Earthing, fixing of open type fuse units, HT/LT/LAS and jumpering 3 Nos. Earth pits with tubs including painting of metal parts, structure poles, fixing of tapping channel, tranformer bed structure including concreting (Except erection of Transformer)

Erection of DP Structure with AB swich, top channel.cross bracing,earthing,painting provinding stay including concreting

Guarding arrangements for HT Guarding

Transport of poles/Materials/ conductors and other materials (excluding loading and unloading charges.)below 8 Kms

Transport of poles/Materials/ conductors and other materials (excluding loading and unloading charges.)above 8 KM for additional KM.

Loading of poles upto 8.0m/ 27'-0"

Loading of poles above 8.0m

Un loading of poles upto 8.0m/27'-0"

Un loading of poles above 8m

Transporting of poles from road site to pole pit including loading and unloading of poles by using JCB or manual up to 100 m

Transporting of poles from road site to pole pit including loading and unloading of poles by using JCB or manual beyond 100 m

Loading or unloading of Transformer upto 100 KVA

Loading or unloading of Transformer above 100 KVA and upto 200 KVA

Erection of New Transformers all capacities (Wth Jumpering)

Cutting of channel

Cutting of Angle

Resagging of ACSR 7/3.35 MM /AAAC 3.15 MM Rabbit Conductor

Resagging of ACSR 7/2.59 MM /AAAC 7/2.50 MM Wheasel & ACSR 7/2.11 mm conductor

Releasing of ACSR /AAAC Conductors from Conductor drum and coiling 7/2.59,AAAC 7/2.50,ACSR 7/3.35,7/3.15 mm

Drilling of hole in channel only 3/4" & 1"

Mass concreting including materials (Cement + river sand/M-sand and Blue metals and watering)

Sleeve concreting including materials (Cement + river sand/M-sand and Blue metals and watering)

Stay concreting including cost of materials and labour

Engaging of JCB/Crane first 2 hour

Engaging of JCB/Crane for every additional hours

Releasing of grills from RCC poles

Dismantling of LT pin Insulator

Dismantling of LT shackle

Dismantling of conductor ACSR 7/3.35 mm,AAAC 7/3.15 mm.

Dismantling of conductor ACSR 7/2.59 & AAAC 7/2.50 mm,ACSR 7/2.11 mm conductor

Dismantling of stay set

Dismantling of V x arm

Dismantling of 11 KV pin insulator

Dismantling of 11 KV Disc

Releasing of HTS wire from PSC poles

Setright of leaning of poles (All sizes of poles)

KSM AND CO (BID ID -1073207)

MARUTHIENGINEERING (BID ID -1073864)

KDM Builders & Contractors (BID ID -1073639)