Furnishing Works Of Multipurpose Cultural Complex Under Nagar Parishad Garhwa Nagar, Jharkhand

Earth work in excavation in foundation trenches in ordinary soil ( vide classification of soil item A) and disposal of excavated earth as obtained to a distance upto 50M including all lifts leveling ramming the foundation treanches, removing roots of trees, and shrubs all complete as per approved design, building specification and direction of E/I.

Earth filling in foundaion trenches and plinth in layers not exceding 150 mm thick well watered, rammed, fully compacted and fine dressed with earth obtained from excavation of foundation trenches within a lead of 50 M and lift of 1.5 M all complete as per building specification and direction of E/I. (mode of measurement compacted volume)

Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete.

Providing coarse clean local SAND IN FILLING in foundation trenches or in plinth including ramming and watering in layer not exceeding 150 mm thick with all leads and 1.5 M lifts including cost of all materials, labours, royalty and taxes all complete as per building specification and direction of Engineer In charge (Mode of measurement compacted volume)

Providing designation 75A one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/I.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 Cement : 2 coarse sand (zone-III): 4 graded stone aggregate 40 mm nominal size)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand (zone-III): 6 graded stone aggregate 40 mm nominal size)

Providing and laying in position cement concete of soecified grade excluding the cost of centering and shuttering - All work up tp plinth level 1:4:8 (1 cement :4 coarse sand (Zone -III) :8 graded stone aggregrate 40 mm normial size)

Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. (Note :- Cement content considered in this item is @ 330 kg/cum. Excess/ less cement used as per design mix is payable/recoverable separately). All works upto plinth level

All work above plinth level upto floor V level

Add for using extra cement in the items of design mix over and above the specified cement content therein.

Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete

Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.

Columns, Pillars, Piers, Abutments, Posts and Struts.

Providing Tor steel reinforcement of 10mm,28mm,& 32mm. dia bars as per approved design and drawing inclusive carriage of M.S. bars to work site, cutting, bending and binding with annealed wire with cost of the wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I.TMT Fe 500 (only valid for Tata (Tiscon),SAIL,JSPL,Electrosteel Steel Ltd.Bokaro &Vizag ( RINL)

Providing designation 75A brick work in C.M (1: 6) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar, joints cost of screening materials raking out joints to 15mm depth , curring , taxes and royalty all complete as per builiding specification and direction of E/I.

Granite stone slab of colour black, Cherry/Ruby red Area of slab upto 0.50 sqm Polished Granite stone slab of all colour and texture except Black, Cherry/Ruby Red

Area of slab over 0.50 sqm

Providing 19mm thick water proof cement plaster (1:3) with clean coarse sand of F.M. 1.5 with 5% cico or any other approved water proofing compound including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).

CARRAIGE OF MATERIALS SAND ( 22KM )

CHIPS ( 55 KM )

METAL ( 55 KM )

BRICKS ( 10 KM ) TAKEN 1000 / Nos

Providing, fabricating, assembling and erection of TENSILE Membrane Fabric structure with TENSILE fabric having a minimum weight of 900g/sqm ,Tensile strength 4300/4200N/5cm ,tear strength 500/500N as per particular specification with a 10 years warranty etc. over steel frames with all fittings and fixtures such as Galvanized MS Membrane /End Plate, Shackles, Rigging Screws, Turnbuckles, swedge, fork, kedar rods & galvanized MS strands/cables with stainless steel end terminals complete by a specialized sub-contractor. Rate includes cost of fabric , shop drawings, patterning, forming, cutting, fabrication, hot weld stitch of fabric, , assembling and installation with GI cables, hardware ,Aluminum flat, EPDM gasket and required accessories wherever required complete including, tools and plants, etc. Required for all operations in all respect complete as per drawing, design, specifications and as directed by Engineer-in-charge. NOTE: fabric area to be measured. WARRANTY ON FABRIC 10 YEARS ON PRO-RATA BASIS AS REQUIRED Providing & Supplying of GI Cable with MS End Terminals & MS Nut & washer, Diameter as per Design, Type of cable is 6x19 strands of required length of Grade1570 steel core as per specification under "IS 2266 (2002), with MS end terminals at both ends of required length as per approved drawings as Under Membrane Cables complete in all respect as per direction Of Engineer-In-Charge.

Providing and Fixing reception backdrop panneling 150mm thick size as per drawing , made in hard wood frame(mirandi wood) 50mm x 50mm thick & c/c 600mm maximun both ways joint rigidly horizontally & vertically with nails, screws etc. fixed to wall/ceiling & columns with wooden plugs. 11 mm thick MDF Board is to be fixed on top of frame with 10x8 mm deep grooves on both sides of the center panel. 11mm MDF Board is to finished with laminate on both side of approved design and all groves to be finished with laminate shade. Center panel is of 19mm MDF jali /Engg. stone cladding of aprooved design and of size: The visible part through MDF Jali is to be finished with lacqured glass of approved design. All work is to be carried out as per drawing and instructions of engineer in charge. ( MDF Board/ MDF Jali & Laminate Make Green ply/Century /Merino or Equivalent ), (Adhesive make Pidilite or equivalent)

P/Fixing Wall paper as per approved brand and manufacture to give an even shade and color as approved by architect. & instructionof Engineer in charge.

Providing and Fixing MDF Wall Panneling made in hard wood frame (mirandi) 35mm x 50mm thick c/c 600mm horizontally & vertically, fixed to wall/columns with wooden plugs,then 11 mm thick Medium Density Fiber Board fixed on top of frame with 10x8 mm deep Groove & same finished with 1.0 mm thick laminate of approved quality pasted with the help of adhesive with provision of pin up board for backlit , making of niche as /dwg fixed nails screws etc. All grooves to be finished with lacquer polish maching with laminate shade as per Technical specification, drawing and instructions of Engineer in charge. (MDF Board & Laminate Make Green ply/Century /Merino or Equivalent, Adhesive make Pidilite or equivalent)

Providing and fixing LCD console made in 19 mm thick commercial block board with 2 Nos of drawer with back of 6mm commercial ply and 1.0 mm thick designer laminate of approved colour and shade. Inside surface to be enamel painted. The item including all necessary hardwares, screws, locks handles, drawer channel ,ss legs 32mmx 150 ht. , etc. Wall Panneling made in 19mm thick commercial block board with 150mm depth fixed on wall with cutting and making for LCD unit & cutting / provision for all electrical points as required . Outside surface to be finished with the approved 1 mm thick laminate all complete. All work to be carried out as per drawing and instruction of Engineer in charge. ( Com. block board Board, ply & Laminate Make Green ply/Century /Merino or Equivalent ), (Adhesive make Pidilite or equivalent) GUEST BEDROOM SIZE 2300X450X750

Providing and Fixing of full ht. wardrobe depth 600mm with shutters made in 19 mm thick com. block board and 6mm thick com ply for back side to be fixed on the wall, with 19mm thick com. block board shelves inside placed horizontally & vertically, 1no. of drawer inside with self closing bright finished CP hinges,inside enamel paint finish and front shutters finished with 1 mm thick laminate of approved color and shade .The item includes providing 150mm SS finished handles on front for shutters,including necessary hardware hanger rod, drawer channel etc. all complete as per drawing to the & instructionof Engineer in charge (Com. block board Boad & Laminate Make Green ply/Century /Merino or Equivalent ), (Adhesive make Pidilite or equivalent) (all hardware make ozone /door set or equivalent),

Providing & Fixing laminated wooden false ceiling , made in 50x50mm Hard wood frame (Mirandi) center to center 600mm both ways, hang to ceiling with help of hanger support 'L' type G.I angle (25x25mm) and anchor bolt etc. over fixed 11mm thick MDF board with 10x8mm deep groove finish with lacqure polish, 1.0 mm thick approved shade laminate to fixed on MDF board, defects free bubbles free with help of adhesive. as per drawing and to the entire satisfaction of Engineer in charge. ( MDF Boad & Laminate Make Green ply/Century /Merino or Equivalent ,Adhesive make Pidilite or equivalent)

Providing and making cove in gypsum board.false ceiling with all accessories.as per drawing and instructions of Engineer in charge .

Providing & Fixing Translucent Roller Blinds Over Window Opening With Arrangement Of Closing & Opening With G - String, Complete In All Respects As Per Design And Instruction Of Engineer In Charge. (Make Vista / Mac Or Equivalent,Fabric Model No. Equivalent To Echo (Vista) / Abstract /Silky/ Ribcord/Drizzle/Trans)

Grid Tiles:Providing and fixing tiled false ceiling at all height of approved materials of size 595x595 mm in true horizontal level, suspended on interlocking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanized butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights and all levels as per specifications, drawings and as directed by Engineer-in-charge. 15 mm thick soft core mineral wool 595x595mm thick white colour tile having NRC greater than 0.65. Approved Makes - Armstrong/Credence/Solo Acoustics

Wall Treatment :- Providing and fixing Slated Wooden Acoustic panel with lineal perforations to be fixed on walls.The panels shall be with melamine laminate finish of size 2430mm x 128mm x15mm wirh 4mm slats at 28 mm pitch, Toungue and Groove edges . The back of the panels are perforated with 10mm diameter circular holes with a nonwoven fabric covering of 0.2mm for providing Sound absorption via the acoustic impedance method.Panel is to be fixed on GI framework as recommended by the manufacturer with screw fixed horizontal / vertical to wall at every 600mm c/c with centre & edge bracket in tongue & groove system on GI framework. The cavity of framework should be inserted with 50mm thick 1000 gsm polster wool. Approved Makes - Armstrong/Credence/Solo Acoustics

PET Wall Panel: Providing & Fixing of PET Acoustical paneling of Composition - 100% Polyester Fibre, Size- 2400 x 1220 mm (8'x4') , Thickness - 9mm, Density-180 Kg/m3, NRC-0.6 -0.85 fixed on 9mm thick ply strip and to be fix on 50mm GI framework using 32x32x50x mm floor channel and 34x36x48x mm stud channel having 3600mm length at 600mm x 1200mm Gi frame cavity should be filled with 800gsm polster wool with required screw etc . Approved Makes - Armstrong/Credence/Solo Acoustics

Providing and Fixing Furniture Atelier/Godrej/Durian or equivalent/Godrej/Durian or equivalent Make Panel table Linea 2400 x 750 :- Top shall be of 36 mm thick prelaminated particle board with 2mm thick PVC edge banding finish with as per approved laminate color. GABLE ENDS :- shall be of 25mm thick prelaminated particle board with 2mm thick PVC edge banding finish with as per approved laminate color. MODESTY:- shall be of 18mm thick prelaminated particle board with 2mm thick PVC edge banding finish with as per approved laminate color.

Providing and Fixing Furniture Atelier/Godrej/Durian or equivalent Make chair upholstered with Leatherite . The seat and back are made up of 1.2cm thick hot pressed plywood upholstered with leatherite and moulded Polyurethane foam. The back foam is designed with contoured lumber support for extra comfort. BACK SIZE: 520 mm (W) x 730 mm(H). SEAT SIZE: 550mm(W) x 520mm(D). Overall Height of chair is 1180mm .The seat and back are Joined together. The armrest assembly comprises of Chrome Plated Contoured frame which is connected and bolted to both seat and back . The armrest top is cushioned with foam which is upholstered with matching Leatherite. The chair has TORSION BAR TILT MECHANISM.

Recpetion Table Size:- 3000x750x1050 mm :- TOP & Gable End : 25mm thick PLPB board with 2mm thick PVCedge banding finish with as per approved laminate color. Rest All :-18 Mm thick PLPB board with 2mm thick PVCedge banding.Finish with as per approved laminate .

Providing and placing ergonomical, comfortable and aesthetically design medium Back chair. The seat size shall be 485mm (W) x 460mm (D), The back height shall be mm 560mm and overall height- 1000mm . The seat shall be made of hot pressed 15mm thick moulded ply and upholstered with Urethane foam Foam density 40kg/m3 & net fabric tapestry. The Back is made of polyproplene outer side and upholstered with nett or breathable mesh with cushioned support. The armrests are made of polyproplene and mechanism shall be center tilt with single point locking. The pneumatic height adjustment shall have an adjustment of 63mm in BIFMA Standard class 4.Pedestal is made of injection moulded black nylon fitted with 5 nos. twin wheels castors which are made of injection moulded black nylon 30% glass filled and nylon base is load tested capacity -1150 kg in BIFMA standard.

Providing and Fixing Furniture Atelier/Godrej/Durian or equivalent Make Supplying and placing of approved make 3 seater Sofa with 2 end armrest complete as per specifications . upholstered in fabric and should be in compliance with the following specifications. Seat, backrest and armrests - padded with polyurethane foam and upholstered in beige and/or light grey woven fabric. Frame of sofas made of durable wood and the base of seat and backrest equipped with metal Z- shape springs. Legs - 60mm dia. steel tube in black polyurethane finish with black plastic shoe.

Providing and Fixing Furniture Atelier/Godrej/Durian or equivalent Make PODIUM SIZE 750 x 750X750MM :- Top shall be of 36 mm thick prelaminated particle board with 2mm thick PVC edge banding finish with as per approved laminate color. GABLE ENDS :- shall be of 25mm thick prelaminated particle board with 2mm thick PVC edge banding finish with as per approved laminate color. MODESTY:- shall be of 18mm thick prelaminated particle board with 2mm thick PVC edge banding finish with as per approved laminate color.

Providing and Fixing Furniture Atelier/Godrej/Durian or equivalent Make Top : 12mm Toughned Glass Top Chrome Pipe Frame- Size 1'-6"x1'-6" Feet

Providing and Fixing Nilkamal Plastic Moulded Chair With Arms Without Cushion Single Piece Plastic Moulded (Model: NILKAMAL EEEZY - GEM ID 5116877-69256810708)

AIR COOLDED DUCTABLE UNIT Supplying, installing, testing and commissioning of INVERTER HIGH STATIC Ducted Air conditioners suitable for R410A or eco- friendly refrigerant System having fin & tube type Hydrophilic & black Fins Note: Providing and fixing of Powder coated M.S. angle iron frame work/Masonary Pedastal with required anti- vibration mounting for outdoor unit is also included in the above scope. Contractor to submit design/Scheme for Iron to be provided by the client. frame and obtain approval of engineer/employer before proceeding purchase & installation. Nitrogen pressure testing for refrigerant pipe leakages & flushing during installation & after commissioning between IDU & ODU shall be done. During brazing an inert gas (such as nitrogen) shall becontinuously passed through the system at a rate sufficient to maintain an oxygen free environment to prevent the formation of copper oxide scale. Necessary corrosive treatment of copper coil of the ODU with Aluminium hydroxide, 25 microns thickness or equivalent coating as per manufacturer standard to protect from corrosion, sulfur and other chemical contaminants present in the air. The coating should be done in the presence of OEM represantative. The coating shall be carried-out by the authorized applicator of coating manufacturer. The rates shall be included with suitable refrigerant and drain piping with insulations. Below 15.9 mm copper pipes are soft drawn and above 15.9 pipes are hard drawn with tube thickness is 1.2 mm minimum. Refrigerant pipe insulated with 19 mm thick closed cell elastomeric nitrile rubber and wrapped with 0.3 mm thick aluminium foil. Drain pipes insulated with 6 mm thick closed cell elastomeric nitrile rubber and wrapped with 0.1 mm thick Nitrile Rubber Shielded control cum transmission wiring of 2 core x 1.5 sqmm copper FRLSH, XLPE insulated cable in suitable GI conduits accessories between indoor and outdoor units. Necessary securing of conduit shall be made by contractor. After completion of work wall and floor shall be repaired and brought to its original finish. The rate will also include cost of laying of GI conduit between indoor and outdoor units. 8.5 TR Inverter High Static Ductable Unit Notes: The vendor may offer the outdoor units as per availability from the manufacturer, however keeping the tonnage same as per BOQ subject to approval by Consultant/Client. The indoor units capacity can be also as per availability from the manufacturer but keeping the minimum capacity as required in BOQ subject to approval by Consultant/Client.

Refrigerant Copper Piping Supplying and Laying of Refrigerant Garde/ Hard Drawn/Soft Drawn Copper Piping interconnected with indoor and outdoor units complete with all fittings, necessary support and duly insulated with closed cell elastomeric nitrile rubber insulations as required and all joints properly sealed with black tape. Refrigerant Pipies shall be running over saddle/bracket fixed to wall or roof. 28.58 mm

Deducting for air conditioning/ventilation Supply, installation, testing and commissioning of factory fabricated Galvanized Steel (GSS) Sheet metal ducts complete with flanges, neoprene rubber gasket, elbows, Splitter Damper, vanes, hangers & support etc. as required as per IS/DW144/SAMACNA standard & confirming to specification. Duct shall be furnish at site in "L" shape or box shape from factory. The rates shall include all materials of the duct and labour for suspension and supporting arrangement for plenums, ducts, complete with fire retardant flexible connection as required and as per specifications. Note : Splitter Shall be a part of ducting. 0.63 MM (24 Gauge )

0.80 MM (22 Gauge )

1.00 MM (20 Gauge )

1.25 MM (18 Gauge) Plenum

Duct Insulation Supplying , installation, testing & commissioning of external thermal Closed Cell Elastomeric Nitrile Rubber insulation on ducts with duly laminated aluminum foil of mat finish with thickness is 0.3mm. Insulation density not less than 50±5 Kg/m³ & thermal Conductive not exceeding 0.032 W/mK at an average Temperature of 0°C and . The Material Shall be rated as Class 1 as per BS476 Part7 for surface spread of flame test and Class O as per BS476 part6 for fire propagation test. The Material shall have Fire Approval from CBRI - Roorkee & no toxicity under flaming and non- flaming condition as per AITM 3.000 (1993). Adhesive used for setting the insulation shall be non - flammable, Vapour Proof. All Joints should be sealed with 3 mm thick 50 mm wide PE tape and Flange to be overlapped by 6" width of the same material thickness. Finally Duct insulated should be strapped by 12mm metallic Packing strip at every random meter & conforming to standard and Specification. 13 mm

ACCOUSTIC for High Static Duct 19 mm thick

Duct Acoustic Lining for Mouth Piece Supply and fixing of acoustic lining of supply air duct and plenum with thick Engineered Nitrile Rubber open cell foam having a Noise Reduction Coefficient of 0.55 with Density 160 Kg/m3 passing Class 1 Fire Performance test as per BS 476 Part 7, Air Erosion test for 10,000 fpm air velocity as per ASTM C 1071-05 and with built-in antimicrobial protection. The material should pass Fungi Resistance Test as per DIN EN ISO 846 Method A and Bacterial Resistance Test as per DIN EN ISO 846 Method C; to be applied using manufacturer's recommended Rubber based Adhesive in a blend of solvents. Acoustic lining in ducts/plenum up to 5.0 Running meter from Fan Outlet as per specification and drawings. 20 mm For Duct

25 mm For Plenum

CONTROL DAMPER VOLUME CONTROL DAMPER Supply,. Installation, testing and commissioning of 18 Gauge G.I construction Frame with 22/24 Gauge GI Aero foil blades Volume control Duct/Wall Dampers/Collar Dampers with linkages, levers & fittings for Controlling the Airflow in Ducts with neoprene rubber gaskets,nuts, Bolts, Screws Linkages, Flanges etc. as per specification.

Grilles Supply. Installation, testing and commissioning of powder coated extruded aluminium section grills with aluminium dampers for supply air terminal and grilles without damper for return air for air-conditioning as per specification. Grilles with Dampers

Grilles without Dampers

Linear Grille Supply. Installation, testing and commissioning of powder coated extruded aluminum Linear Grille. 150 mm

SITC of RIGHT MAIN SPEAKER SYSTEM make: PULZ Audio or equivalent

SITC of LEFT MAIN SPEAKER SYSTEM make: PULZ Audio or equivalent

SITC of BRACKET FOR RIGHT AND LEFT SPEAKER make: PULZ Audio or equivalent

SITC of DUAL 18” SUBWOOFER make: PULZ Audio or equivalent

SITC of Stage Monitors make: PULZ Audio or equivalent

SITC of Front Fill Speaker make: PULZ Audio or equivalent

SITC of 1300 Watt 2 Channel Power Amplifier make: PULZ Audio or equivalent

SITC of 4 Channel Power Amplifier make: PULZ Audio or equivalent

SITC of SPEAKER MANAGEMENT SYSTEM make: PULZ Audio or equivalent

SITC of 55" Display Monitors make: Samsung/LG/Sony

SITC of Wireless handheld microphone make: JTS or equivalent

SITC of Wireless Condenser Lapel Microphone make: JTS or equivalent

SITC of Wired Vocal Microphone make: JTS or equivalent

SITC of Gooseneck Microphone make: JTS or equivalent

SITC of 22 Channel Analog Mixer make: Soundkraft or equivalent

SITC of 5000 Lumes Laser Projector make: Sony or equivalent

SITC of Ceiling Mount Kit for Projector make: Logic or equivalent

SITC of Wireless Presentation Device make:Kramer or equivalent

SITC of Transmitter and Reciever 50 Mtr 4K make: Milestone Pro or equivalent

SITC of 8x8 HDMI Switcher with Audio Deembedding make: Milestone Pro or equivalent

SITC of HDMI VGA Wall Plate for Podium make:Logic or equivalent

SITC of Wooden Podium with Gooseneck Connectivity

SITC of 3 Metres HDMI patch cord in existing conduit. make: Manhatten or equivalent

SITC of 15 Metres HDMI patch cord in existing conduit. make: Manhatten or equivalent

SITC of 24 Port POE Switch make: Tplink or equivalent

SITC of 42U EQUIPMENT RACK WITH FAN, PDU UNIT AND ALL COMPLETE ACCESSORIES. make: Tarkus or equivalent

SITC of Floor stand for microphone. make: GS or equivalent

Providing & laying of 2.5 Sqmm Speaker Cable make:Krystal or equivalent

Providing & laying of 4 Sqmm Speaker Cable make:Krystal or equivalent

Providing & laying of Microphone Cable make: Krystal or equivalent

Providing & laying CAT-STP Cable make: Dlink or equivalent

SITC of Wifi Router make: Tplink or equivalent

Providing & laying of Cables and Connectors make: MX or equivalent

Supplying of XLR cable Boxes

Providing and fixing Signage at terrace level with Laser Cut Acrylic Letters with Stainless Steel sides along with Korean Led Lights, Letters will be fixed over the Structure made. - 40 Feet by 3 Feet

Extra for fixing Signage at terrace level with MS frame with Guarder suport from the Back - 40 Feet by 3 Feet

Supply of XLPE insulated PVC sheathed, heavy duty, armoured electrical cable with aluminium conductor for working voltage upto and including 1100 volts. (conforming to IS-7098. (Part-I). 4 core, 16 sq.mm.

4 core, 10 sq.mm.

4 core, 6 sq.mm.

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required. Upto 35 sq. mm

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 4 X 10 sq. mm (25mm) including 4x6 sq.mm

4 X 16 sq. mm (28mm)

Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required. 100 mm wide x 50 mm depth x 1.6 mm thickness.

150 mm wide x 50 mm depth x 1.6 mm thickness.

300 mm wide x 50 mm depth x 1.6 mm thickness.

Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "bends" (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required. 100 mm wide x 50 mm depth x 1.6 mm thickness.

150 mm wide x 50 mm depth x 1.6 mm thickness.

300 mm wide x 50 mm depth x 1.6 mm thickness.

Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "Tee" (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required. 100 mm wide x 50 mm depth x 1.6 mm thickness.

150 mm wide x 50 mm depth x 1.6 mm thickness.

300 mm wide x 50 mm depth x 1.6 mm thickness.

Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "Cross member"(galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc as required. 100 mm width X 50 mm depth X 1.6 mm thickness

150 mm width X 50 mm depth X 1.6 mm thickness

300 mm width X 50 mm depth X 1.6 mm thickness

Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray “Reducer” (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required. 100 mm wide x 50 mm depth x 1.6 mm thickness.

150 mm wide x 50 mm depth x 1.6 mm thickness.

300 mm wide x 50 mm depth x 1.6 mm thickness.

Wiring for light point/ fan point / exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed PVC conduit, with modular switch, modular plate, suitable GI box etc as required. Group C

2x1.5 sq mm + 1x1.5 sq mm earth wire

2x2.5 sq mm + 1x2.5 sq mm earth wire

Supplying and fixing of following sizes of PVC conduit along with the accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 20mm dia

25mm dia

32mm dia

Add GST @18%

Add Labour Cess @1%

NIRANJAN RAI