CA NO GE(U)/CHM-61/2025-26 PERIODICAL/ ROUTINE MAINTENANCE OF WATER SUPPLY ASSETS SUCH AS REWINDING OF MOTOR, FOUNDATIONS AND CONNECTED ACCESSORIES IN PUMPING INSTALLATIONS UNDER AGE EM-II OF GE (U) CHANDIMANDIR

Amount

Taking down carefully centrifugal pump set 215 HP by disconnecting the pump from motor after unscrewing nuts/ bolts of coupling, foundation, inlet, delivery pipes and shifting of pump to workshop for repair/ servicing, comprising strip opening of pump, replacement of any defective parts, re-assembling and shifting from workshop to site, re-installation at location as directed by Engr-in-Charge, testing on load, complete all as specified and as directed. Note:-(Supply of spare parts shall be measured and paid for separately under respective items here-in-after).

Supply only pump shaft sleeve made of gun metal suitable for 215 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only key for main shaft/impeller (SS) suitable for 215 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only check nut suitable for 215 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only stuffing box bush suitable for 215 HP motor pump as per manufacturer's design complete all as specified and as directed.

Remetaling of shaft, turning, grinding as per the required size and polishing including provision of neck rings of impellers complete all as specified and directed.

Supply only water seal suitable for 215 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only CI/ MS gland packing plate of 215 HP pumping set as per existing material complete all as specified and as directed.

Supply only stuffing box packing and greasing suitable for 215 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only pump set bearing housing DE/NDE of CI grade FG 210 suitable for 215 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only motor pump tyre coupling of suitable size, pin and bush type complete with bush nut, bolts etc suitable for 215 HP motor pump incl boring as per shaft size as per manufacturer's design complete all as specified and as directed. Make: B-FLEX RB Lovejoy or equivalent.

Taking down carefully centrifugal pump set 200 HP by disconnecting the pump from motor after unscrewing nuts/ bolts of coupling, foundation, inlet, delivery pipes and shifting of pump to workshop for repair/ servicing, comprising strip opening of pump, replacement of any defective parts, re-assembling and shifting from workshop to site, re-installation at location as directed by Engr-in-Charge, testing on load, complete all as specified and as directed. Note:-(Supply of spare parts shall be measured and paid for separately under respective items here-in-after).

Supply only pump shaft sleeve made of gun metal suitable for 200 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only key for main shaft/impeller (SS) suitable for 200 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only check nut suitable for 200 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only stuffing box bush suitable for 200 HP motor pump as per manufacturer's design complete all as specified and as directed.

Remetaling of shaft, turning, grinding as per the required size and polishing including provision of neck rings of impellers complete all as specified and directed.

Supply only pump shaft EN-8 (SS) complete including key and key groove as per existing material complete all as specified and as directed.

Supply only water seal suitable for 200 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only CI/ MS gland packing plate of 200 HP pumping set as per existing material complete all as specified and as directed.

Supply only stuffing box packing and greasing suitable for 200 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only pump set bearing housing DE/NDE of CI grade FG 210 suitable for 200 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only motor pump tyre coupling of suitable size, pin and bush type complete with bush nut, bolts etc suitable for 200 HP motor pump incl boring as per shaft size as per manufacturer's design complete all as specified and as directed. Make: B-FLEX RB Lovejoy or equivalent.

Taking down carefully centrifugal pump set 100 HP by disconnecting the pump from motor after unscrewing nuts/ bolts of coupling, foundation, inlet, delivery pipes and shifting of pump to workshop for repair/ servicing, comprising strip opening of pump, replacement of any defective parts, re-assembling and shifting from workshop to site, re-installation at location as directed by Engineer-in-Charge, testing on load, complete all as specified and as directed. Note:-Supply of spare parts shall be measured and paid for separately under respective items here-in-after .

Supply only pump shaft sleeve made of gun metal suitable for 100 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only key for main shaft/impeller (SS 410) suitable for 100 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only check nut suitable for 100 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only stuffing box bush/latern ring suitable for 100 HP motor pump as per manufacturer's design complete all as specified and as directed.

Remetaling of shaft, turning, grinding as per the required size and polishing including provision of neck rings of impellers suitable for 100 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only pump shaft EN-8 (SS) complete including key and key groove as per existing material complete all as specified and as directed.

Supply only water seal suitable for 100 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only stuffing box packing and greasing suitable for 100 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only pump set bearing housing DE/NDE of CI grade FG 210 suitable for 100 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only tyre coupling complete set of suitable size (TC-14/15/16 or any other as per site requirement) suitable for 100 HP motor pump incl boring as per shaft size as per manufacturer's design complete all as specified and as directed. Make: Fenner/ Lovejoy/ Unimac

Supply only bronze impeller suitable for 100 HP pump all as per manufacturer's design as per staging and eye of the impeller complete all as per specified and directed.

Supply only CI/ MS gland packing plate of 100 HP pumping set as per existing material complete all as specified and as directed.

Taking down carefully centrifugal pump set 50 HP by disconnecting the pump from motor after unscrewing nuts/ bolts of coupling, foundation, inlet, delivery pipes and shifting of pump to workshop for repair/ servicing, comprising strip opening of pump, replacement of any defective parts, re-assembling and shifting from workshop to site, re-installation at location as directed by Engineer-in-Charge, testing on load, complete all as specified and as directed. Note:- Supply of spare parts shall be measured and paid for separately under respective items here-in-after.

Supply only pump shaft sleeve made of gun metal suitable for 50 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only key for main shaft/impeller (SS 410) suitable for 50 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only check nut suitable for 50 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only stuffing box bush suitable for 50 HP motor pump as per manufacturer's design complete all as specified and as directed.

Remetaling of shaft, turning, grinding as per the required size and polishing including provision of neck rings of impellers suitable for 50 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only water seal suitable for 50 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only stuffing box packing and greasing suitable for 50 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only pump set bearing housing DE/NDE of CI grade FG 210 suitable for 50 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only CI/ MS gland packing plate of 50 HP pumping set as per existing material complete all as specified and as directed.

Taking down carefully centrifugal pump set 30 HP by disconnecting the pump from motor after unscrewing nuts/ bolts of coupling, foundation, inlet, delivery pipes and shifting of pump to workshop for repair/ servicing, comprising strip opening of pump, replacement of any defective parts, re-assembling and shifting from workshop to site, re-installation at location as directed by Engr-in-Charge, testing on load, complete all as specified and as directed. Note:-(Supply of spare parts shall be measured and paid for separately under respective items here-in-after)

Supply only pump shaft sleeve made of gun metal suitable for 30 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only key for main shaft/impeller (SS 410) suitable for 30 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only check nut suitable for 30 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only stuffing box bush suitable for 30 HP motor pump as per manufacturer's design complete all as specified and as directed.

Remetaling of shaft, turning, grinding as per the required size and polishing including provision of neck rings of impellers suitable for 30 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only pump shaft EN-8 (SS) complete including key and key groove as per existing material complete all as specified and as directed.

Supply only bronze impeller suitable for 30 HP pump all as per manufacturer's design as per staging and eye of impeller complete all as specified and as directed.

Supply only water seal suitable for 30 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only stuffing box packing and greasing suitable for 30 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only pump set bearing housing DE/NDE of CI grade FG 210 suitable for 30 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only CI/ MS gland packing plate of 30 HP pumping set as per existing material complete all as specified and as directed.

Taking down carefully centrifugal pump set 20 to 25 HP by disconnecting the pump from motor after unscrewing nuts/ bolts of coupling, foundation, inlet, delivery pipes and shifting of pump to workshop for repair/ servicing, comprising strip opening of pump, replacement of any defective parts, re-assembling and shifting from workshop to site, re-installation at location as directed by Engineer-in-Charge, testing on load, complete all as specified and as directed. Note:-(Supply of spare parts shall be measured and paid for separately under respective items here-in-after) .

Supply only pump shaft sleeve made of gun metal suitable for 20 to 25 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only key for main shaft/impeller (SS 410) suitable for 20 to 25 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only check nut suitable for 20 to 25 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only stuffing box bush suitable for 20 to 25 HP motor pump as per manufacturer's design complete all as specified and as directed.

Remetaling of shaft, turning, grinding as per the required size and polishing including provision of neck rings of impellers suitable for 20 to 25 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only water seal suitable for 20 to 25 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only stuffing box packing and greasing suitable for 20 to 25 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only pump set bearing housing DE/NDE of CI grade FG 210 suitable for 20 to 25 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only CI/ MS gland packing plate of 20 to 25 HP pumping set as per existing material complete all as specified and as directed.

Taking down carefully centrifugal pump set 10 to 15 HP by disconnecting the pump from motor after unscrewing nuts/ bolts of coupling, foundation, inlet, delivery pipes and shifting of pump to workshop for repair/ servicing, comprising strip opening of pump, replacement of any defective parts, re-assembling and shifting from workshop to site, re-installation at location as directed by Engr-in-Charge, testing on load, complete all as specified and as directed. Make:-(Supply of spare parts shall be measured and paid for separately under respective items here-in-after) .

Supply only pump shaft sleeve made of gun metal suitable for 10 to 15 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only key for main shaft/impeller (SS 410) suitable for 10 to 15 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only check nut suitable for 10 to 15 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only stuffing box bush suitable for 10 to 15 HP motor pump as per manufacturer's design complete all as specified and as directed.

Remetaling of shaft, turning, grinding as per the required size and polishing including provision of neck rings of impellers suitable for 10 to 15 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only water seal suitable for 10 to 15 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only stuffing box packing and greasing suitable for 10 to 15 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only pump set bearing housing DE/NDE of CI grade FG 210 suitable for 10 to 15 HP motor pump as per manufacturer's design complete all as specified and as directed.

Taking down carefully centrifugal pump set 5 to 7.5 HP by disconnecting the pump from motor after unscrewing nuts/ bolts of coupling, foundation, inlet, delivery pipes and shifting of pump to workshop for repair/ servicing, comprising strip opening of pump, replacement of any defective parts, re-assembling and shifting from workshop to site, re-installation at location as directed by Engr-in-Charge, testing on load, complete all as specified and as directed. Make:-(Supply of spare parts shall be measured and paid for separately under respective items here-in-after) .

Supply only pump shaft sleeve made of gun metal suitable for 5 to 7.5 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only key for main shaft/impeller (SS 410) suitable for 5 to 7.5 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only check nut suitable for 5 to 7.5 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only stuffing box bush suitable for 5 to 7.5 HP motor pump as per manufacturer's design complete all as specified and as directed.

Remetaling of shaft, turning, grinding as per the required size and polishing including provision of neck rings of impellers suitable for 5 to 7.5 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only water seal suitable for 5 to 7.5 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only stuffing box packing and greasing suitable for 5 to 7.5 HP motor pump as per manufacturer's design complete all as specified and as directed.

Supply only pump set bearing housing DE/NDE of CI grade FG 210 suitable for 5 to 7.5 HP motor pump as per manufacturer's design complete all as specified and as directed.

All as per the description of serial item No 09 here-in-above but 200 HP motor .

All as per the description of serial item No 09 here-in-above but 100 HP motor .

All as per the description of serial item No 09 here-in-above but 75 HP motor

All as per the description of serial item No 09 here-in-above but 50 HP motor

All as per the description of serial item No 09 here-in-above but 30 HP motor

All as per the description of serial item No 09 here-in-above but 20 to 25 HP motor

All as per the description of serial item No 09 here-in-above but 15 HP motor.

All as per the description of serial item No 09 here-in-above but 10 HP motor.

All as per the description of serial item No 09 here-in-above but 7.5 HP motor

All as per the description of serial item No 09 here-in-above but 5 HP motor.

Supply and fixing in repair ball bearing DE/NDE suitable for AC electric motor, 3 phase, 415/440 volts of rating 215HP capacity complete all as specified and as directed.

All as per the description of serial item No 20 here-in-above but of rating 200 HP motor.

All as per the description of serial item No 20 here-in-above but of rating 100/75 HP motor.

All as per the description of serial item No 20 here-in-above but of rating 50 HP motor.

All as per the description of serial item No 20 here-in-above but of rating 30 HP motor.

All as per the description of serial item No 20 here-in-above but of rating 25 HP motor.

All as per the description of serial item No 20 here-in-above but of rating 20 HP motor.

All as per the description of serial item No 20 here-in-above but of rating 15 HP motor.

All as per the description of serial item No 20 here-in-above but of rating 10 HP motor.

All as per the description of serial item No 20 here-in-above but of rating 7.5 HP motor.

All as per the description of serial item No 20 here-in-above but of rating 5 HP motor.

Taking out open well type 7.5 HP, 3 phase, submersible motor pumpset after dis-connecting the electric connections, shifting the same to workshop for servicing, shifting back to site after repair, re-fixing at site, replacement of rubber washers, fixing of nuts, bolts, washers, refixing electrical connections complete all as specified and as directed.

Taking out open well type 0.5 to 1 HP, 3 phase, submersible motor pumpset after dis-connecting the electric connections, shifting the same to workshop for servicing, shifting back to site after repair, re-fixing at site, replacement of rubber washers, fixing of nuts, bolts, washers, refixing electrical connections complete all as specified and as directed.

Material and labour for Strip opening of open well type submersible motor of capacity 0.5 to 1 HP, 3 phase, taking out burnt winding carefully, cleaning of slots, rewinding with PVC insulated copper cable of appropriate size matching with manufacturer's design including replacement of all insulating materials such as glass paper, insulated sleeves, varnishing, drying up as applicable, re-assembling complete all as specified and as directed.

Disconnecting electric connection of VT pump set and removing the nut and bolts and keeping aside , removing the VT pump set by using chain pulley block wire rope, pipe holding flat iron clamps etc.

Disengaging/ Dismantling of discharge head by the help of special tool, removing of solenoids valve, and complete system, removing of the column pipe, line shafts, rotor and pump set by the help of chain pulley block wire rope, pipe holding flat iron clamps. Taking out damaged shaft from the column pipe including transportation of oil tubes for removing of damage bush and other parts to wksp. Note:- Supply of spare parts shall be measured and paid for separately under respective items here-in-after.

S&F as in repairs SS shaft of existing size 40mm, 5'-0" long including threading, grinding and cutting, complete all as specified and as directed.

Replacement of gun metal bush, of shaft & repair of Rotor of VT pump set complete all as specified and as directed.

M&L for opening of twin-lobe (Raoots type blower) compressor for servicing, greasing, testing,of Lobes, Rotor, Shafts Helical timing gear etc speed 1500 RPM,14.5 HP and capacity 1000 CMH Model No-RL-110AC Installed at MDPH and Main pump house complete all as specified and as directed.

Supply only gear oil -360 for lubrication of twin-lobe (Raoots type blower) compressor complete all as specified and as directed. .

S&F as in replacement compressor bearing housing DE/NDE suitable for 14.5/ 15 HP compressor as per manufacturer's design complete all as specified and as directed.

Remetaling of shaft, turning, grinding as per the required size and polishing including provision of neck rings of impellers suitable for compressor installed at filter bed as per manufacturer's design complete all as specified and as directed.

S&F as in replacement Air filter for compressor installed at filter bed as par sample at site complete all as specified and as directed.

Dismantling of Double reduction gearbox with coupled induction motor mounted on common base frame of MS channel including Paddle assembly at Main Filter pump house and Servicing /overhualing, greasing of reduction gearbox and motor, reassembled the complete gearbox with all accessories complete all as specified and directed complete all as specified and directed .

M&L for servicing and overhauling of single/double reduction Gear Box vertical/ horizontal type with rotation 25:1 cogulation having integrally casted body, carbon steel worm, brass lined gear with interchangeable legs suitable for Bridge moving/ Alum dozing and including necessary shaft, pulley, nut bolts wooden fan as per existing dimension complete all as specified and directed complete all as specified and directed .

S & F DOL starter for induction motor capacity of 1 HP to 3 HP Three phase ,415 V, 50 Hz as per specified and directed by Engr-in-charge.

Supply & fixing of fan belt (Size B32/B34) for reduction gear all as spicified and directed by Engr - In - Charge.

Supply of gear oil for reduction gear all as specified and directed by Engr-in-charge.

M & L for preparation of old painted steel surfaces of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint all as specified and directed by Engineer - in - Charge .

M&L for servicing of hand operated crane of capacity upto 5 tonne including cleaning with wire brush, greasing of hoist, painting with approved color, replacement of hook, cleaning and greasing of rail slots, replacement of bridge drive and idler wheels, repair of pulley chain, painting of all iron parts with approved color, complete including load testing all as specified and directed

Supplying and laying in replacement, PVC insulated and sheathed, multi stranded unarmoured copper conductor, electric cable, 1100V grade of size 6 Sqmm 1 core complete all as specified and as directed by Engineer-in-charge.

Supplying and laying in replacement, PVC insulated and sheathed, multi stranded unarmoured copper conductor, electric cable, 1100V grade of size 16 Sqmm 1 core complete all as specified and as directed by Engineer-in-charge.

Supplying and laying in replacement, PVC insulated and sheathed, multi stranded unarmoured copper conductor, electric cable, 1100V grade of size 50 Sqmm 1 core complete all as specified and as directed by Engineer-in-charge.

Supply & fixing in replacement spider coupling set, size L-150 of motor pump set complete made out of cast iron including drilling holes and suitable size of nuts & bolts complete all as specified and directed. Make: Flex-C/Lovejoy/HIC/Fenner

All as per item no. 51 above but of size L-190

All as per item no. 51 above but of size L-225

All as per item no. 51 above but of size L-276

All as per item no. 51 above but of size L-295

M&L for periodical Servicing of motor pumps of capacity 10 to 15 HP which includes strip opening of end plates, cleaning of bearing housings with k-oil, refilling with superior quality grease, realignment of motor pump with water level complete all as specified and as directed. Note: (i) Record of servicing shall be entered in a log book and shall be signed by the Engineer-in-Charge. (ii) Each service per motor pump to be measured and paid as one unit.

All as per item No 56 here in before but for motor pumps of capacity 20 to 30 HP

All as per item No 56 here in before but for motor pumps of capacity 50 HP

All as per item No 56 here in before but for motor pumps of capacity 100 HP

All as per item No 56 here in before but for motor pumps of capacity 200/215 HP

Taking down carefully existing motor and pump set of capacity 10 to 20 HP from MS common base frame for replacement of deteriorated base frame and repair of PCC foundation including re-mounting of motor pump set to match with alignment of existing pipe line complete all as specified and directed by Engineer-in-Charge. Note : PCC foundation & MS common base frame shall be measured & paid seperately under respective item of BOQ.

All as per item No 61 here in before but for motor pumps of capacity 25/30 HP

All as per item No 61 here in before but for motor pumps of capacity 50 HP

All as per item No 61 here in before but for motor pumps of capacity 100 HP

All as per item No 61 here in before but for motor pumps of capacity 200/215 HP

Demolition of cement concrete (un-reinforced) in floors / pavings, (below or above ground level) and of any description and in any position not otherwise specifically provided for all as specified and directed by Engineer - in - Charge .

M&L Cement concrete 1:2:4 type B-1 using 20mm graded crushed stone aggregate for foundations, fillings and mass concrete all as specified and directed by Engineer – in - Charge.

S & F in replacement rolled mild steel channel, angle or tee sections, fixed independently, without connection plate, etc Fe-290 (Gde E-165) including nuts, bolts and washers for base frame of motor pump set, drilling of holes of suitable size for bolts & painting with 2 coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engineer-in-charge

Supply & fix in repair direct online starter suitable for 5 HP capacity motor in sheet steel enclosure complete all as specified and directed.

Supply & fix in repair star delta starter suitable for 7.5 HP capacity motor in sheet steel enclosure complete all as specified and directed.

Supply & fix in repair star delta starter suitable for 10 HP capacity motor in sheet steel enclosure complete all as specified and directed.

Supply & fix as in repairs fully automatic star delta starter suitable for 50 HP capacity motor in sheet steel enclosure with suitable capacity of contractor and timer complete all as specified and directed.

Supply & fix as in repairs fully automatic star delta starter suitable for 100 HP capacity motor in sheet steel enclosure with suitable capacity of contractor and timer complete all as specified and directed.

M & L motor capacitor of capacity 7.5 micro farad complete all as specified and directed.

M & L motor capacitor of capacity 20 micro farad complete all as specified and directed.

S&F Electrical insulating mat as per IS 15652:2006, with anti skid design, 1.1 KV grade, 3mm thick, 1 mtr wide, type-C, complete all as specified and as directed.

Supply and fixing of copper thimble for 10 to 35 Sqmm cable

Supply and fixing of copper thimble for 50 to 95 Sqmm cable

Supply and fixing of copper thimble for 120 to 150 Sqmm cable

S & F in replacement CI non rising sluice valve, SS spindle 100 mm bore, flanged ends PN-1.6 ISI marked as per IS:14846/2000 and CI operating wheel including gasket, nuts, bolts and washers complete all as specified & directed.

S & F in replacement CI non rising sluice valve, SS spindle 150 mm bore, flanged ends PN-1.6 ISI marked as per IS:14846/2000 and CI operating wheel including gasket, nuts, bolts and washers complete all as specified & directed.

S & F in replacement CI non rising sluice valve, SS spindle 200 mm bore, flanged ends PN-1.6 ISI marked as per IS:14846/2000 and CI operating wheel including gasket, nuts, bolts and washers complete all as specified & directed.

S & F in replacement CI non rising sluice valve, SS spindle 250 mm bore, flanged ends PN-1.6 ISI marked as per IS:14846/2000 and CI operating wheel including gasket, nuts, bolts and washers complete all as specified & directed.

S&F horizontal, multistage ,end -section pressure pump with axial suction port radial discharge port 1HP single phase 220-240 Volts,min head 34 mtr, min flow 3.1 cum/hr, RPM 2900, Rated current-3.1-2.8A, enclosure class (ICE34-5)IP55 ,Pump materials in contact with the liquid are in high grade SS withminiumum efficiency index 70% with pressure controller for constant water pressure,incl pressure meter ,pressure tank 24L for constant water ,material SS 304 with incl complete GI fitting for fixing of pump with existing pipe Inlet & outlet 20/25 mm bore incl PCC Work complete all as specified & directed.

Supply Only PM/5G Pressure relay for pressure pump 05 bar 1.25 BP ,complete all as specified and directed by Engr-in-charge.

Supply and fixing as in replacement Cast iron butterfly valve of 300 mm bore,wafer type,PN 10, ISI marked inluding jointing material complete all as specified and directed.

S & F as in replacement Ductile iron Foot Valve, PN 10, EPDM seals, SS weld overlay, with Galvanized steel filter, as per IS 4038 of size 150mm, complete all as specified and directed.

S & F as in repairs cast iron non return valve 150 mm dia class PN 1.0 ISI marked with flanged ends complete incl jointing materials such as nuts, bolts, washers, gaskets etc complete all as directed.

S & F as in repairs cast iron non return valve 200 mm dia class PN 1.0 ISI marked with flanged ends complete incl jointing materials such as nuts, bolts, washers, gaskets etc complete all as directed.

S & F as in repairs cast iron non return valve 250 mm dia class PN 1.0 ISI marked with flanged ends complete incl jointing materials such as nuts, bolts, washers, gaskets etc complete all as directed.

Demolition of brick work built in cement mortar including all quoins, arches, piller etc complete all as specified and directed.

M & L for brick work with sub class ‘B’ bricks, straight or curved on plan to exceeding 6m mean radius, built in 1:4 cement mortar complete all as specified and directed

M & L for 15mm thick rendering in cement mortar 1:4 on fair faces of brick wall or concrete surface finished even and smooth without using extra cement complete all as specified and directed.

M & L MS black sheet 3mm thickness used as trench / valve pit cover incl painting work with two coats of black bitumouns paint over a coat of red oxide primer complete all as directed.

S&F in replacement PVC Branch pipe 15 mm dia flexible complete all as specified and directed.

Opening of shutter rotational gear / mechanical parts and servicing cleaning and greasing of completed movable part make the shutter smoothly function including replace of gear any size, spring any type completed all as specified and directed

M & L for cleaning , scraping out old rubbed paint / rust & applying one coat of rubber synthetic paint over a coat of primer on 200 to 215 HP centrifugal pump set complete all as specified and directed by En-In-Charge.

M & L for cleaning , scraping out old rubbed paint / rust & applying one coat of rubber synthetic paint over a coat of primer on 100 HP centrifugal pump set complete all as specified and directed by En-In-Charge.

M & L for cleaning , scraping out old rubbed paint / rust & applying one coat of rubber synthetic paint over a coat of primer on 50 HP centrifugal pump set complete all as specified and directed by En-In-Charge.

M & L for cleaning , scraping out old rubbed paint / rust & applying one coat of rubber synthetic paint over a coat of primer on 20 HP to 40 HP centrifugal pump set complete all as specified and directed by En-In-Charge.

M & L for cleaning , scraping out old rubbed paint / rust & applying one coat of rubber synthetic paint over a coat of primer on 10 HP to 15 HP centrifugal pump set complete all as specified and directed by En-In-Charge.

S&F in replacement of MCCB 160 A, 4 pole, 25 KA (Ics =100% Icu) with adjustable thermal & fixed magnetic setting with bus bar spreader links for connecting both incoming and outgoing cables with suitable connections with suitable size of glands etc complete including testing & commissioning all as specified and as directed by the Engineer-in-Charge.

S&F in replacement of MCCB 200 A, 4 pole, 36 KA (Ics =100% Icu) with adjustable thermal & fixed magnetic setting with bus bar spreader links for connecting both incoming and outgoing cables with suitable connections with suitable size of glands etc complete including testing & commissioning all as specified and as directed by the Engineer-in-Charge.

S&F in replacement of MCCB 250 A, 4 pole, 36 KA (Ics =100% Icu) with adjustable thermal & fixed magnetic setting with bus bar spreader links for connecting both incoming and outgoing cables with suitable connections with suitable size of glands etc complete including testing & commissioning all as specified and as directed by the Engineer-in-Charge.

S&F in replacement of MCCB 100 A, 3 pole, 25 KA (Ics =100% Icu) with adjustable thermal & fixed magnetic setting with bus bar spreader links for connecting both incoming and outgoing cables with suitable connections with suitable size of glands etc complete including testing & commissioning all as specified and as directed by the Engineer-in-Charge.

S&F in replacement of MCCB 125 A, 3 pole, 36 KA (Ics =100% Icu) with adjustable thermal & fixed magnetic setting with bus bar spreader links for connecting both incoming and outgoing cables with suitable connections with suitable size of glands etc complete including testing & commissioning all as specified and as directed by the Engineer-in-Charge.

S&F in replacement of MCCB 160 A, 3 pole, 50 KA (Ics =100% Icu) with adjustable thermal & fixed magnetic setting with bus bar spreader links for connecting both incoming and outgoing cables with suitable connections with suitable size of glands etc complete including testing & commissioning all as specified and as directed by the Engineer-in-Charge.

Supply and fixing as in repairs HRC fuse 100 Amp for Soft Starter all as specified and as directed by the Engineer-in-Charge.

Supply and fixing as in repairs HRC fuse 160 Amp for Soft Starter all as specified and as directed by the Engineer-in-Charge.

Supply and fixing as in repairs HRC fuse 250 Amp for Soft Starter all as specified and as directed by the Engineer-in-Charge.

Supply only glass type fuse 5 Amp, 125V for Soft Starter all as specified and as directed by the Engineer-in-Charge.

Supply and fix in replacement indicator lamp, LED type of colour red/ green complete all as specified and directed by Engr-in-Charge.

Supply and fix as in replacement 3 pole power contactor 415 volt 50 Hz, 140 Amp complete all as specified and directed.

Supply and fix as in replacement 3 pole power contactor 415 volt 50 Hz, 70 Amp complete all as specified and directed.

Supply and fixing as in replacement soft starter 3 phase, 50 Hz, 415 V, IEC current rating 105/110 A, with heat sink , internal bypass, supply voltage limits from 195V to 484 V, phase failure and thermal protection, suitable for 55 kW motor, complete all as specified and directed.

Supply and fixing as in replacement soft starter 3 phase, 50 Hz, 415 V, IEC current rating 140/143 A, with heat sink , internal bypass, supply voltage limits from 195V to 484 V, phase failure and thermal protection, suitable for 75 kW motor, complete all as specified and directed.

Repair & servicing of control card of soft stater of capacity 175 KW which includes assessment through visual inspection, diagnostic test to identify the cause of malfunction, checking of voltage level, current flow, checking fault in thyistors, damaged PCB components, loose connection, incorrect settings etc including repairing and refixing the same to its original position and testing for its functioning complete all as specified and directed.

All as per item No 119 here in before but for control card of soft stater of capacity 75 KW.

All as per item No 119 here in before but for control card of soft stater of capacity 37.5 KW.

Repair of grass cutting machine by mean of defective worn out parts, complete all as specified and directed. Make: Honda or Heera Note:- Supply of spare parts shall be measured and paid for separately under respective items here-in-after.

Nylon cutter

Nylon cutter assembly

Air filter

Spark plug

Ignition coil

M&L for opening of submersible capacity of submersible motor 7.5HP phase taking out burnt carefully cleaning slots, rewinding of the same with PVC insulated copper cable of appropriate size matching with manufactures design including replacement of all insulating materials such as glass paper, insulated sleeves varnishing drying up as applicable re-assembling complete all as specified and as directed.

KAPOOR ENGINEERS (BID ID -3510094)

M/s Friends Engineering Works (BID ID -3512776)