PROVISION OF ENTRY / EXIT GATE IN FRONT OF CAVALRY ROAD ALONGWITH ALLIED INFRASTRUCTURE AND SECURITY LIGHTS ALONG THE BOUNDARY WALL OF HV AREA AT AF STATION UNDER GE (AF) PALAM, DELHI CANTT-10

Amount

SCH 'A' SECTION-I (B&R WORK) Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out in soft/loose soil.

Excavating over areas, n exc 1.5 m deep and getting out in soft/loose soil.

Excavation in trenches n.exc 1.50 m wide and n.exc 1.5 m deep for foundation etc or for shafts, wells , manholes, pier holes etc n.exc 10 Sqm on plan & n exc 1.5 m in depth & getting out in soft / loose soil.

Returning filling in including spreading, leveling watering and well ramming in layers n.exc 25 cm in layers in soil.

Removing of excavated soil from the site to outside defence land complete.

Dismantling water tank of capacity exc 250 and n exc 500 ltrs complete.

Taking up or down steel tubing and connections including cleaning for re-fixing for 20 mm bore.

Taking up or down steel tubing and connections including cleaning for re-fixing for 15 mm bore.

Taking down AC/PVC pipes of 100/110mm bore of any description including all fittings complete .

Dismantling Cast Iron pipes of 100 mm bore of any description including fittings complete and jointed in cement mortar.

Dismantling Cast Iron pipes of 75 mm bore of any description including fittings complete and jointed in cement mortar.

Taking down gun metal globe or gate valve of 15mm bore with iron wheel head, screwed both ends for iron pipe.

Taking down gun metal globe or gate valve of 20 mm bore with iron wheel head, screwed both ends for iron pipe.

Taking down bib tap,cast copper alloy with crutch or butterfly handle screwed for 15 mm bore pipe.

Taking downstop valve,cast copper alloy with crutch or butterfly handle screwed for 15 mm bore pipe.

Taking down shower rose 15mm bore chromium plated fixing to steel pipes

Taking down chowkats or frames with shutter (without taking off shutters from the frame) not exc 1.5 Sqm each with hardware fittings complete.

Taking down chowkats or frames with shutter (without taking off shutters from the frame) exc 1.5 Sqm and not exc. 4 Sqm each with hardware fittings complete.

Demolition of stone slabs of any description or thickness in floors, aprons etc laid, bedded in any mortardand any position complete.

Dismantling unframed timber in filllets, rails, posts, rafters, purlins etc under 40 Sqcm in section.

Dismantling structural steel work including doors, gates,grills etc but excluding framed trusees etc.

Dismantling of Asbestos cement (corrugated, semicorrugated) sheets in roof coveringscomplete.

Dismantling posts or struts (wood, steel or R.C.C.) embedded in concrete etc any section including taking out embedded portion and making good disturbed ground.

Demolition cement concrete in ground floors and pavings n exc 15 cm thickness(below or above ground level) and removing the debris from site to MoD land complete.

Demolition cement concrete in ground floors and pavings exc 15 cm thickness above ground level and removing the debris from site to MoD land complete.

Demolition of brickwork or stone/boulder masonry built in cement or cement lime mortar including all quoins, arches, pillars etc but excluding ashlars facings, dressed stonework and precast concrete articles complete and removing the debris from site to MoD land complete.

Demolition of RCC jallies of any size and description and removing the debris from site to MoD land complete.

Taking down flushing cisterns of any capacity and description including flushing pipe complete.

Taking down grating of any type complete.

Taking down Nahani/Floor traps of any type fixed in cement concrete complete.

Taking down SWG gully traps of any size fixed in cement concrete.

M&L for cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate ) as in foundations, filling and mass concrete, pole etc.

M&L for Brick work with sub class 'B' brricks, straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete .

M&L for Damp proofing course in 1:2:4 type B-O (12.5mm graded stone aggregate ) 40mm thick with water proofing compound including applying a coat of blown hot bitumen at the rate of 1.50 Kg per Sqm and blinding with clean dry sand @ 0.05 Cum per Sqm. (Note : WPC shall be measured and paid separately)

M&L for treating the bottom and sides of excavation at the rate of 5 litres of emulsion per square metre of surface area.

M&L for treating and backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface area.

M&L for treating and top surface of filled earth at the rate of 5 liters of emulsion per square meter of surface area

M&L for treating and soil under floors, plinth protection at the rate of 5 liters of emulsion per square meter of surface area

M&L for treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall

Supply only integral water proofing compound.

M&L for rendering 10 mm thick in CM 1:6 on other than fair faces of brick work or concrete surfaces including finishing surface even and smooth without using extra cement .

M&L for 15 mm thick rendering on fair faces of brick or concrete surfaces in CM 1:4 using WPC as per manufacturer instruction including finishing surface even and smooth without using extra cement . (Note: WPC shall be measured and paid separately)

M&L for rendering 5mm thick in CM 1:3 on fair faces of concrete surfaces including finishing surface even and smooth without using extra cement in ceiling complete .

M&L for preparation of newly plastered surfaces of wall and applying three coats of white wash complete .

M&L for preparation of newly plastered surface of walls and applying two coats of colour wash over one coat of white wash complete .

M&L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete .

M&L for hard core of broken stone or boulders gauge n.exc 63mm deposited, spread and leveled in layers n.exc 15cm thick, watered and rammed to a true surface complete all as specified.

M&L for 75 mm thick Cement Concrete1:3:6 type C-2 (using 40mm graded stone aggregate) as in plinth protection including making joints & filling with bitumen sand mastic & necessary form work complete.

M&L for 75 mm thick cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base.

M&L for 40mm thick Cement Concrete1:2:4 type B-1 (using 20mm graded stone aggregate) as in floor including finishing surface even and smooth without using extra cement .

M&L for 10mm thick screed bed or bedding layer in cement mortar 1:4 on roof with WPC (Note: WPC shall be measured and paid separately)

M&L for preparation of plastered/concrete surfaces of roof and applying the under mentioned course of roof treatment :- (a) Applying evenly compactible primer @ 0.3 litre/Sqm over concrete/plastered roof surfaces. (b) Applying a tack coat of industrial bitumen @ 85/25 grade @ 1.20 Kg/Sqm (c) APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non woven fabric (wt. not less than 160 gms/sqm) mat with minimum longitudinal end over laps of 15cm and horizontal side laps of 15cm and joints finally thermo fused with help of LPG flames all as specified and as directed by Engineer-in-Charge. (d) Applying aluminium paint 100 micron thick over top surface of water proofing membrane (e) The amount against guarantee period of 10 years for roof treatment shall be retained from contractor ‘s dues or contractor may furnish a fix deposit receipt in favour of GE (AF) Palam Delhi Cantt-10 as issued by Nationalize Bank.

M&L for Pressed steel frames 105 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete as all specified.

S & F 35 mm thick factory made of second class hard wood plain, framed, panelled shutter ( with two panels) with lock rail and panel of 9mm B.W.P commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS:1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and as directed by the Engineer-in-Charge

S& F anodised aluminium window and ventilator fixed type without sash bar, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc including 5 mm thick glass pane etc complete all as specified.

S & F 200mm long aluminium, anodised, barrel tower bolts of extruded section and fixed complete .

S & F 100mm aluminium handles, cast type, anodised complete.

Supply and fixing for butt hinges, ISI Marked, 100mm size, medium weight, cold rolled of mild steel complete.

S & F 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete.

M&L for preparation of newly wood and wood based surfaces of any description not otherwise described over 10 Cm width or girth and applying two coats of synthetic enamel paint over a coat pink primer complete all as specified and directed by Engineer-in-Charge.

M&L for two coats of synthetic enamel paint over a coat of red oxide primer including preparation of newly steel surfaces over 10cm in width or girth complete.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical for rough finished surface fo concrete complete .

Formwork to sides of pillars,posts, struts, piers, columns and stanchions for rough finished surfaces of concrete complete.

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams etc for rough finished surfaces complete.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work;not exceeding 200mm thick (Horizontal or sloping) for rough finished surfaces complete.

Formwork to soffits of chajjas for rough finished surfaces complete all as specified and as directed.

M&L for TMT bars 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia.

All as per item No 67 here-in-before but 8 mm dia stirrups .

M&L RCC M-25 design mix for foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete.

M&L RCC M-25 design mix for columns, pillars, piers, posts and struts complete .

M&L RCCM-25 design mix in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves complete .

M&L RCC M-25 design mix(20mm graded aggregates) for Beams, cantilevers, bressummers, lintels complete all as specified and as directed.

M&L RCC M-25 (20mm graded aggregates) for chajjas complete all as specified and as directed.

M&L for cement concrete 1:3:6 mix type C-1 using 12.5mm graded stone aggregate as in back of chowkhat complete.

M&L for 15 mm thick rendering on fair faces of brick or concrete surfaces in CM 1:4 including finishing surface even and smooth without using extra cement .

M&L for rendering 15mm thick in CM 1:3 on fair faces of brickwork or concrete surfaces as in skirting including finishing surface even and smooth without using extra cement comlete.

M&L for earth filling under floor including spreading and levelling in layers n exc. 25 cm thick ramming ,watering etc as required.

S&F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring & fixed in floor 140mm size.

Rolling and consolidation of formation surface including watering with 8 to 12 tonne power road roller complete.

M&L for soiling (or sub grade) 200mm thick (spread thickness) in two layers of 100mm each with broken boulders or quarried stone 63mm nominal size, interstices filled, surface formed and rolled and consolidated with 8 to 12 tonne power roller to required gradient and camber

M&L for 150mm thick (Consolidated thickness) WBM in 2 layers of 75mm each with granite, trap or basalt coarse aggregate of grading 2 (63 to 40mm size) spread, rolled and consolidated with 8 to 12 tonne power roller to req gradient & camber.

M&L for preparing unsurfaced WBM surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc and applying evenly a priming/tack coat with bituminous primer @ 10Kg/10 Sqm using paving bitumen VG-10 grade.

M&L for Premix bituminous, macadam laid/rolled and compacted to required gradient and camber (consolidated thickness 75mm or less) using binder content @ 4% by weight of total mix with paving bitumen VG-30 grade by computrized hot mix plant and laid by mechanical paver,rolled and compacted to required camber and gradient by using 8 to 12 tonne power roller all as specified and directed by Engineer-in-charge .

M&L for preparing black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc and applying evenly a priming/tack coat with bituminous primer @ 5Kg/10 Sqm using paving bitumen VG-10 grade.

M&L for Bituminous premix semi dense asphaltic concrete 40mm consolidated thickness with 5.5 % bitumen binder content VG-30 grade by weight of total mix, by computrized hot mix plant and laid by mechanical paver,rolled and compacted to required camber and gradient by using 8 to 12 tonne power roller all as specified and directed by Engineer-in-charge .

M&L for road side berms 75mm thick (spread thickness) on sides of road using approved earth including spreading, leveling, watering, well ramming with hand roller 0.5 tonne capacity and finished to requried gradient & camber.

M&L for Continuous brick edging with width equal to the width of the brick laid dry on end vertically with brunt clay bricks of sub class 'B' complete.

M&L for painting lines, dashes, arrows, letters etc on roads, pavements and the like not exc 10cm wide with road marking paint, white or golden yellow complete.

M&L for 100 mm thick Cement Concrete1:4:8 type D-2 (using 40mm graded stone aggregate) as in sub base for floor finishes.

M&L for 150 mm thick cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in hard standing laid in bays including form work and finishing surface even and fair without using extra cement complete all as specified and directed by Engr-in-Charge.

M & L for forming 20 mm thick expansion joints filled with performed bituminous filler board and top 30 mm primed and sealed with sealing compound grade ‘B’ all as specified and directed by Engineer-in-Charge.

M&L for Cement Concrete1:4:8 type D-2 (using 40mm graded stone aggregate) in bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 150mm bore pipe complete all as specified and as directed by Engineer-in-Charge.

S&F for 150mm dia salt glazed stone ware drain pipes grade ‘A’ laid in trenches and jointed as specified complete all as specified and directed by Engineer-in-charge

Extra for forming fair finished drain or manhole channel 30cm inner girth in cement concrete using extra cement including mould mitred/stopped ends etc (inner girth mesuered only) complete.

All as per item No.94 above but add or deduct for each 25mm girth or part thereof over or under 30cm

M & L for providing cement concrete1:3:6 type C-1 using 20 mm graded stone aggregate as in lintels upto 1.5 m clear span, cills, steps; seismic and other similar bands, plinth courses, parapets and railings upto 60 CM in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete.

M&L for Cement Concrete1:2:4 type B-1 (using 20mm graded stone aggregate) as in benching and surface drain complete.

M & L for pre-cast Cement Concrete1 : 2 : 4 type B-1using 20 mm graded stone aggregate as in manhole / drain cover and set in CM 1 : 6 complete all as specified.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing beching for and forming branch channel (1/2 round or ¾ section) in Cement Concrete1:2:4 type B-1 smooth finish, forming benching as required for 150mm dia pipe complete all as specified and as directed by Engineer-in-charge.

M&L framed work as in door or gates or other section with gusset plate rail bracing etc complete drilled for fixing of steel sheeting or other covering to doors etc to be prepared for hanging or sliding with and including either hook and hinges or steel hanging door fittings running rail and guides and hanging also fastening and fixing & conforming to grade E-165 (Fe-290) complete.

S & F mild steel work as in bands, straps, clamps; hold fasts; wall ties; wind ties; hook for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; plate washers & similar small articles conforming to gradeE-165 (Fe-290)

S & F for 1.25 mm thick mild steel, plain, black sheet in wall cladding, steel gates & similar work, cut to size, holes punched including rounded headed screws, clout nails or reverts & fixed to steel framing with plain 40 mm lap joints with riveted or welded seams including bending or turning up, mitred angles, etc. as required

M&L for preparation of newly plastered surface and applying two coats of cement base paint on walls.

SCH 'A' SECTION-I (E&M WORK) M&L for Point wiring with PVC insulated 1.5 Sqmm FRLS multistrand copper conductor cable 1100 volts grade drawn into and including rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked with all conduit fittings and fixing accessories in concealed wiring system by cutting wall including sunken anodized pressed steel terminal boxes with 3 mm thick laminated white bakelite sheet cover for mounting switches, sockets, fan regulators etc and PVC insulated 1.5 Sqmm FRLS multistrand copper conductor cable as continuous earth wire connecting to common earth dolly complete for One light / fan point controlled by one switch one way switch.

All as per item No 104 above but for One socket outlet 5 Amp controlled by one switch on independent board

All as per item No 104 above but for One socket outlet 5 Amp controlled by one switch on the same board.

M&L for Point wiring with PVC insulated 2.5 Sqmm FRLS multistrand copper conductor cable 1100 volts grade drawn into and including rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked with all conduit fittings and fixing accessories in concealed wiring system by cutting wall including sunken anodized pressed steel terminal boxes with 3 mm thick laminated white bakelite sheet cover for mounting one 15 amp socket outlet &switch and PVC insulated 2.5 Sqmm FRLS multistrand copper conductor cable as continuous earth wire connecting to common earth dolly complete.

S&F switch piano flush button single pole one way 5 Amp

S&F socket outlet 5Pin, 5Amp , flush type complete.

S&F socket outlet 2 in 1, 3 Pin, 5 Amp and 15 Amp flush type, universal complete

S&F switch piano flush button single pole one way 15 amps

Supply and fixing for ceiling rose, surface type, 65mm x 50mm, 2 to 3 terminal complete all as specified and as directed by Engr-in-Charge.

Supply and fixing stepped type fan regulator AC 230 volts, 50 HZ complete

S & F electronic ceiling fan single phase 240 Volt of size 1200 mm sweep, BEE 5 star rating complete with rod,nult,bolts etc including provisioning of flexible cord copper of size 1.5 Sqmm three core from ceiling rose to fan for giving connection and providing continuous earthing connection complete all as specified and directed by Engr-in-Charge. Make:- Orient/Havlls/Crompton/Bajaj

S & F electric exhaust fan single phase 240 Volt of size 300 mm sweepcomplete with accessories including provisioning of flexible cord copper of size 1.5 Sqmm three core from ceiling rose to fan for giving connection and providing continuous earthing connection complete all as specified and directed by Engr-in-Charge. Make:- Orient/Havlls/Crompton/Bajaj

Supply and fixing MCB SPN,6 to 32 Amp, 240 Volts, 10 KA breaking capacity complete .

Supply and fixing MCB SP,6 to 32 Amp, 240 Volts, 10 KA breaking capacity complete .

Supply and fixing in replacement of sheet metal enclosure powder coated for distribution board SPN, 8 ways double door, 200 Amps rated bus bar and with neutral link, earthing bar and DIN rail complete all as specified and as directed by Engr-in-Charge.

S&F integrated LED light fitting 20 watt 6000K complete with all accessories dully connecting with three core flexible copper conductor of suitable size and length duly fixed on two nos of PVC square boxes complete all as specified and directed by Engr-in-Charge.

M&L for earthing complete with galvanized mild steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 Mtr below ground level) with top edge of earth plate not less than 1.5 Mtrs below ground level connected to GI wire 4 mm dia as earth lead by means of nuts, bolts, thimbles, chuck nuts, washers of GI or steel, including cement concrete chamber of internal dimension 300mmx300mmx300mm in mix 1:3:6 type C-1 using 20mm graded stone aggregate with fair finished internal surface of concrete chamber with 15mm thick plaster in CM 1:4, funnel with wire gauge mesh, 80 mm thick precast RCC pit cover 320 mm x 320 mm in mix 1:2:4 type B-1 using 20 mm graded stone aggregate reinforced with XPM Jalli not less than 4 Kg per sqm and charcoal dust and common salt all as shown in electrical plate No 3 of MES SSR Part-I (2009) including provision of GI strip protected by 40 mm dia medium grade pipe and watering pipe of 20mm bore medium grade and including all excavation and earth work & connecting the earthing to an earthing test point/LT Panel/Main switch/MCB DB complete all as specified & directed by Engr-in-Charge.

M&L for Sand cushioning to underground cable provided with layers of sand ( 8 cm before laying anf 15cm after laying the cable i.e 23 cm thick)

M&L for brick laid in trenches for cable protection with burnt clay bricks of sub class 'B' laid dry on flat complete.

M&L XLPE insulated, PVC screened galvanized strip or wire armoured electric power cable heavy duty with stranded aluminum conductor 1100 volts grade, cross-sectional area 16Sqmm 4 Core.

Supply and fixing of high efficiency LED flood lights with high pressure die cas housing with lens (IP65 Protection) reflector and enclosed with toughened glass of capacity 200 Watt complete all as specified and directed by Engr-in-Charge. Make: Crompton/Havells/Wipro

M&L Junction box outdoor type, pole/wall mounting size (300x200x105) mm made out of hot press moulded SMC front openable hinged type including 2 Nos. Al bus bar mounted on insulators heavy duty of rating 32 Amps with and including MCB SP 10 Amp and necessary fixing arrangements to pole with MS calmp, nuts, bolts etc of size 25 x 4 mm duly painted with two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

Supply, laying & testing of steel water tubing, medium grade, galvanised of size 50 mm bore , ISI marked including ISI marked fittings such as tees, bends, elbow, reducer, unions, clamps etc fixed on wall,ceiling, roof, in trenches etc complete.

Supply, laying & testing of steel water tubing, medium grade, galvanised of size 25 mm bore , ISI marked including ISI marked fittings such as tees, bends, elbow, reducer, unions, clamps etc fixed on wall,ceiling, roof, in trenches etc complete.

S&F gun metal globe or gate valve, ISI marked, with iron wheel head screwed both ends for iron pipe or for union and fixed for size 50mm bore pipe complete.

S&F gun metal globe or gate valve, ISI marked, with iron wheel head screwed both ends for iron pipe or for union and fixed for size 25mm bore pipe complete.

Cutting of existing GI pipe in position for insertion collar, tee, branches etc for 50/80mm bore pipe

M&L XLPE insulated, PVC screened galvanized strip or wire armoured electric power cable heavy duty with stranded aluminum conductor 1100 volts grade, cross-sectional area 10Sqmm 4 Core.

S&F steel tubular swaged pole complete with cast iron base plate, finial tapper plug, bolts, nuts and screws as specified of type 410 SP -31 (9 mtr long) complete with CI base plate and finial.

S&F LED street light fitting 90 watt new generation energy saving and enviorenmental friendly long life lighting source and lens embeded PC cover top opening seperate driver compartment with IP-66 protection and impact resistance of IK07 with 10 KV built in surge protection level in pressure die cast aluminum complete. Make : Havels cat part No SL90WLED757PASYPOPCASTHO or its equivalent in philips /C&S

S&F fixing street light bracket made of GI medium grade 40mm bore ISI marked pipe note less than 1.2 mtr long and bend to a shape incluidng 2 Nos MS clamp of size 25mm x 6mm with nut bolt and washer complete.

S&F steel water tubing, light grade, galvanised of size 40 mm bore , ISI marked including ISI marked fittings fixed on wall,ceiling, roof, in trenches etc complete.

S&F LT 3 phase 415 volt non transparent KIOSKS cubical pole box moulded of size 300 mm x 200mm x 75 mm in single piece with engineering plastic of suitable size shock proof, rust proof, fire retardant with 4 No aluminum bus bar of capacity 100 amps mounted on DMC unbreakable insulators with provision of cable entry for main supply in outgoing supply including 2 Nos MCB SP 10 amps complete

M&L for 3 core 2.5 Sqmm copper conductor cable 4 connecting up street / security light with pole junction box complete all as directed.

M&L for cement concrete 1:3:6 mix type C-1 using 20mm graded stone aggregate as in foundation, coping to pole for embeding stay, pole etc including necessary home work back of chowkhat complete.

M & L for providing cement concrete1:2:4 type B-1 using 20 mm graded stone aggregate as in copings to pole, embedding stay rod etc including necessary form work complete.

Jain Associates

Kunal Construction Co.