COMPREHENSIVE MAINTENANCE TO MD ACCN AND OTM ACCN OF PINE WALK, HQ RTG ZONE, PRO, STN CELL, DGO LINE, ANJALEE COMPLEX, 114 TA, NCC DTE, ECHH (JCOS/ORS) AND ASCON NODE AT SHILLONG UNDER GE SHILLONG.

Amount

Dismantling plain or corrugated steel sheeting, any gauge, thickness, roof covering complete all as specified and directed.

Dismantling timber scantling over 40 Sqcm in section in any position (unframed work) complete all as specified and as directed.

All as per item No 2.00 here in above but in fillets, rails, posts, rafters, purlins etc under 40 Sqcm in section complete all as specified and directed.

Dismantling boarding of any description and fixed any position with nails complete..

Dismantling wall/ceiling boards of any description (fibre, pulp,insulation, etc.) or insulation boards/ slab/blankets, any thickness including cover fillets.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish off the premises complete all as directed by Engineer-in- Charge.

Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc in floors and laid bedded and pointed in any mortar including removing rubbish off the premises complete all as directed by Engineer-in- Charge.

Demolition of plain cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

Demolition of precast concrete block walling built in cement mortar complete all as specified and as directed.

Demolition of RCC of any description and in any position not otherwise specifically provided for including removal of debries from site etc complete all as specified and directed.

Taking down cement plaster on brick or concrete surfaces including raking out joints, hacking for key, scrubbing down with water, etc all as specified and directed.

Taking down chowkats or frames exc. 1.5 Sqm but n. exc. 4 Sqm each (without taking off shutters from the frame) and removing from site complete all as specified and directed.

Taking down chowkats or frames n. exc. 1.5 Sqm each (without taking off shutters from the frame) and removing from site complete all as specified and directed.

Taking down shutters of any description exc. 1 Sqm and n. exc. 2 Sqm each and removing from site complete all as specified and directed.

Taking down shutters of any description n. exc. 1 Sqm each and removing from site complete all as specified and directed.

Taking down shutters of any description n. exc. 1 Sqm resecuring or easing & adjusting refixing in same opening complete all as specified and directed.

Taking down shutters of any description exc. 1 Sqm and n. exc. 2 Sqm resecuring or easing & adjusting refixing in same opening complete all as specified and directed.

S&F CGI mild steel sheeting 0.63 mm thick with two corrugation side lap fixed with coach screws and washers as in roofs, walls, with grade of zinc coating 120 etc complete all as specified and as directed.

S&F PGI steel sheeting 0.63mm thick as in ridge, hips valley gutter drip and straight flushing (length and girth as fixed) with grade of zinc coating 120 etc complete all as specified and as directed.

S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed

S&F pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed

M&L for 2nd class hard wood as in scantling, clean sawn, timber fixed complete all as specified and directed.

M&L for preparing surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with two coats creosote oil complete all as specified and directed.

M&L for 2nd class hard wood Plain fillets square rectangular or tringular in section clean sawn on one face or edge in section wrought secured with nails or brads sectional area exc 13 Sqcm but n.exc 25 Sqcm complete all as specified and as directed.

S&F 2nd class hard wood boarding, 40mm thick, as in floors and skirting plained one side with butt joints and fixed with nails etc complete all as specified.

S&F 2nd class hard wood boarding, 20mm thick, as in eaves board/fascia plained one side with butt joints fixed with nails etc complete all as specified and as directed.

M&L for 6 mm thick plywood, grade BWR type BB fixed to timber frame work with nails including taking down old unserviceable one complete all as specified and as specified.

M&L for 6 mm thick Veneered plywood,decorative type, grade 1 (with BWR resin) with decorative face on one side fixed with screws to timber frame work on wall including taking down old unserviceable one etc complete all as specified and as directed.

M&L for French polishing on surfaces of any description,width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coats complete all as specified and as directed.

S&F in repair 18/19 mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice laminations and other side balancing white lamination as in kitchen cabinet / cup-board including taking down old unserviceable one etc completed all as specified and directed.

S&F Continuous (piano) hinges,mild steel, bright finish or electrogalvanised with width of flap ( when open) 30 mm complete all as specified and as directed.

S&F in repair Magnet catcher for cup board shutter, brass body and striking plate including letting in complete all as specified and as directed.

S&F Extruded brass handles, 100 mm size, fabricated type, polished all as specified and as directed

M&L for Anodised Aluminium snap grid frame work for false ceiling comprising of Gl perimeter channnel 0.55 mm thick with Main T-flange of 25 mm and web of 30 mm fixed to surrounding wall flange using nylon sleeves and SS screws and web 25 mm each , Cross T with flange 25 mm and web 25 mm fixed to main T . Main T is suspended from soffit at approx 1200 mm centre to centre with Gl wire of 4 mm dia ,cleat and steel expansion fasteners , GI frame shall be 60 CM X 60 CM to receive E- board ceiling etc completed all as specified and directed.

S&F 4mm thick E-Board of size 600 mm x 600 mm , prepainted fibre boards ceiling designer / decorative type with different designs as approved , fixed or laid / inserted to timber / GI / aluminium frame work in ceiling flat or slopping etc complete all as specified and as directed.

S&F 4mm thick Non asbestos fibre cement Bldg Board fixed or laid / inserted to timber frame work with nails as in ceiling complete all as specified and as directed.

M&L for preparation of new or previously untreated surfaces of ceiling and applying two coats of White wash including necessary preparation etc complete all as specified and as directed.

M&L for 2nd class hard wood Plain fillets bullnosed , splayed, chamfered , or rounded on one face or edge in section wrought secured with nails or brads sectional area exc 03 Sqcm but n.exc 06 Sqcm complete all as specified and as directed.

M&L for Synthetic enamel paint two coats over a coat of pink primer on new or previously untreated wooden surfaces n.exc. 10 Cm width or girth including preparation of wooden surfaces complete all as specified and as directed.

M&L for light shade vitrified ceramic tiles 10 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in cement sand mortar 1:4 complete all as specified and as directed

All as per above item No 40.00 but as in vertical surfaces such as skirting & dado over and including 10mm thick backing course using cement sand mortar (1:3) complete all as specified and as directed.

M&L for Non-skid coloured ceramic tiles 7 to 8 mm thick , (square/rectangular), joint free, area of each tiles exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of the tiles over and including 15 mm thick screed bed in cement sand mortar 1:4 complete all as specified and as directed.

All as per above item No 42.00 but as in vertical surfaces such as skirting & dado over and including 10mm thick backing course using cement sand mortar (1:3) complete all as specified and as directed.

M&L for Non-skid coloured ceramic colour tiles 7 to 8 mm thick , (square/rectangular), joint free, area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of the tiles over and including 15 mm thick screed bed in cement sand mortar 1:6 complete all as specified and as directed.

M&L for Non-skid ceramic colour tiles 7 to 8 mm thick , (square/rectangular), joint free, area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of the tiles over and including 15 mm thick screed bed in cement sand mortar 1:4 complete all as specified and as directed.

M&L for Glazed ceramic colour tiles of size 450 mm x 300mm or 300 mm x 600 mm , 7mm thick in vertical wall etc set and jointed with neat cement slurry and pointed in white or colour cement to match with the colour of tile over and including 10 mm thick backing course in cement sand mortar 1:3 complete all as specified and as directed.

M&L for machine pressed pre polished factory made pavement chequered cement concrete tiles of size 300 X 300 X 25 mm thick of approved design and colour , set jointed and pointed in neat cement slurry with grey cement and pigment over and including 15 mm thick screed bed in cement sand mortar (1:4) complete all as specified and as directed.

M&L for Granite (of any type) tiles 18-20 mm thick machine cut , bedded and jointed with grey cement and pointed with white cement with admixtures over and including 20 mm thick screed bed in cement sand mortar 1:4 complete all as spefied & directed

M&L for Machine pressed pre-cast concrete rubber moulded coloured interlocking paver block of any shape and size conforming to IS : 15658-2006 , 60mm thickness, M-35 grade jointed with grey cement and pigment etc complete all as specified and as directed.

M&L for Sand filling under floors or in foundations etc including watering and consolidation etc for laying interlocking paver blocks etc complete all as specified and as directed.

M&L for 40 mm thick PCC (1:2:4) type B-1 using 20mm graded aggregate as in flooring, finished even and smooth without using extra cement etc complete all as specified and as directed.

M&L for 75 mm thick PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate ) as in path , plinth protection , sub floor etc finishes concrete surface even & smooth or even and rough as required without using extra cement including necessary formwork etc complete all as specified and directed.

M&L for PCC (1:3:6) type C-2 using 40 mm graded stone aggregate as in surface channel and drains including necessary formwork etc complete all as specified and as directed.

M&L for extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement including forms, moulds, mitred/stopped ends etc all as specified and directed.

M&L for Precast cement concrete block masonry with solid block PCC, type C1 (1:3:6, using 20mm graded stone aggregate) exc 10 Cm in width and setting in cement sand mortar 1:6 complete all as specified and as directed by Engineer-in-Charge.

M&L for Precast cement concrete block masonry with solid block PCC, type C1 (1:3:6, using 20mm graded stone aggregate) 10 Cm in width or girth and setting in cement sand mortar 1:4 complete all as specified and as directed by Engineer-in-Charge.

M&L for Precast RCC 1:2:4 type B-1 (using 20mm graded stone aggregate)as in cover slab, landing etc set in CM (1:6) including necessary formwork etc complete all as specified and directed.

M&L for TMT bars 10 mm dia & over, cut to length, bend to shape required including cranking, bending, spirally for hooping for columns, hooking ends and binding with & including mild steel wire not less than 0.90 mm dia on securing with clips complete all as specified and directed by Engr-in-Charge.

M&L for Rendering, 15 mm thick plaster in cement sand mortar ( 1:4), in two layers, top 5 mm thick with approved liquid Water proofing compound @ 3% by the weight of cement or as per manufacturers instructions over a layer of 10 mm thick base coat including finishing the surface even and smooth without using extra cement, complete all as specified and as directed by Engineer-in-Charge. Note WPC shall be measured and paid separately.

Supply only integral water proofing compound, ISI marked.complete all as specified and as directed.

M&L for Cement based paint , two coats over newly plastered surfaces of wall including necessary preparation of plastered surfaces before painting etc complete all as specified and as directed.

M&L for 2nd class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints,complete all as specified and directed by Engineer-in-Charge.

S&F 30mm thick flush shutter solid core construction with block board core and plywood face panels, commercial type on both sides .etc complete all as specified and as directed.

S&F 35 mm thick 2nd class hard wood plain framed panelled shutter any number of panels with panels of timber of veneered particle board with commercial face veneers flat on both side with feather edged etc complete all as specified and as directed.

S&F 35 mm thick, 2nd class hard wood, glazed and skeleton shutter, open rebated and prepared to receive glass or gauge without sash bars , divided in to squares and edges of framing plain chamfered or rounded, fitted with cut or mitred beads for securing glass or gauge etc as specified in SSR Part-I section 8 clause 8.24 (a) complete all as specified and directed.

S&F 30 mm thick, 2nd class hard wood, glazed and skeleton shutter, factory made, open rebated and prepared to receive glass or gauge without sash bars , divided in to squares and edges of framing plain chamfered or rounded, fitted with cut or mitred beads for securing glass or gauge etc as specified in SSR Part-I section 8 clause 8.24 (a) complete all as specified and directed.

M&L for Synthetic enamel paint two coats over a coat of pink primer on new or previously untreated wooden surfaces exc. 10 Cm width or girth including preparation of wooden surfaces complete all as specified and as directed.

S&F Sheet glass 3 mm thick, ordinary quality and glazing with oil putty or wooden beads in square n.exc 0.5 Sqm in each pane complete all as specified and as directed.

S&F stainless mild steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or galvanised wire staples complete all asspecified and as directed

S&F factory made pre laminated solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with single piece extruded pvc profile both side prelam PVC sheet 'C' channel having a 5mm thick PVC sheet strip of 20mm width stuck inside with solvent cement, forming stiles, and 5mm thick both side prelam single piece extruded pvc profile for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of both side prelam 5mm thick PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading, and jointed together with solvent cement complete all as specified and shown on drawing given in SSR Part II. The width of stiles & rails shall be in proportion to the width of the door shutter as given in SSR Part I complete all as specified and directed

S&F Solid PVC door frame of size 50 mm X 47 mm made out of 5mm plain colour PVC sheet reinforcement with M.S square tube, etc complete all as specified and as directed .

S&F Mild Steel Butt hinges, medium weight, cold rolled, 100mm size ISI Marked complete all as specified and directed.

S&F Mild Steel Butt hinges, medium weight, cold rolled, 75mm size ISI Marked complete all as specified and directed.

S&F Extruded aluminium anodised bow handles of 150 mm length etc complete all as specified and as directed.

S&F Extruded aluminium anodised bow handles of 100 mm length etc complete all as specified and as directed.

S&F Aluminium anodised, barrel tower bolts of extruded section 200 mm length complete all as specified and as directed.

S&F Aluminium anodised, barrel tower bolts of extruded section 100 mm length complete all as specified and as directed.

S&F 300 mm long, Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and as directed

S&F in repair Vitreous China wash down (EWC) water closet pan (pedestal pattern), white (excluding flushing cistern and flush pipe) but including PVC water closet seat cover closed pattern with flat bottom and cover with PVC hinge device, flushing pipe, fixing bolt for pedestal pattern and making good to disturbed surfaces of floor etc complete all as specfied and directed. Make:- Prayag cat part no.4022 or equivalent make of Parryware / Hindware.

S&F in repair Plastic Water closet seat cover, black / white closed pattern with flat bottom, and cover and mild steel chromonium plated or aluminised hinging devices, complete all as specifed and directed. Make : Prayag cat part no. 513 or equivalent make of Parrywire / Hindware .

S&F in repair Vitreous china squatting pan of Orissa Pattern of size 580x 440 mm ,white with ‘P’ or ‘S’ trap , front or back inlet but excluding flushing cistern and flush pipe including placing in position in floor and embedded in cushion of PCC type E2 ( using 40 mm graded crushed stone aggregates), 1:5:10 and finishing the top surfaces to match with the existing flooring complete all as specified and as directed .Make:- Prayag cat part no. 4055 or equivalent make of Pearl / Hindware.

S&F in repair PVC (Plastic polymer flushing Cistern) valve less, Symphonic action type, flushing cistern of capacity 10 litres, low level, white with inlet, ball valve, manually operated with one PVC ball valve horizontal plunger type including provision of 32mm PVC flush pipe of required length and making connections complete all as directed by Engineer-in-Charge .Make:- Prayag cat aprt no. 503 or equivalent make of Pearl/ Hindware.

S&F in repair Vitreous china wash hand basin, white, flat back of size 550 mm x 400 mm including bracket, cutting for and pinning the ends of brackets or erecting stands also including brass chromium plated waste coupling 32mm dia, PVC flexible waste pipe of adequate length and dia and PVC connection 15mm size 450mm length with PTMT nuts, complete all as specified and as directed by Engineer-in-Charge .Make:- Prayag cat aprt no. 4645 IRIS or equivalent make of Pearl/ Hindware.

Taking up or down steel tubing with connections of 15 mm bore pipe including cleaning for refixing or removal from site with all fittings complete all as specified and directed.

S&F GI tubing 15mm dia medium grade with all necessary GI fittings ,fixed in wall, ceiling or floor with necessary clamp or hook complete all as specified and as directed.

Refixing of old serviceable steel tubing obtained from taking down pipes against serial item no. 85.00 i.e. of 15mm bore but with new GI fittings in new or old position ( wall, ceiling or floor) complete all as specified and as directed

Taking up or down steel tubing with connections of 20 mm bore pipe including cleaning for refixing or removal from site with all fittings complete all as specified and directed.

S&F GI tubing 20 mm dia medium grade with all necessary GI fittings, fixed in wall, ceiling or floor with necessary clamp or hook complete all as specified and as directed.

Refixing of old serviceable steel tubing obtained from taking down pipes against serial item no. 88.00 i.e. of 20mm bore but with new GI fittings in new or old position ( wall, ceiling or floor) complete all as specified and as directed

S&F in repair sink made of stainless steel 1.00 mm thick kitchen or laboratory with plugs, washers and waste pipe, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495 mm x 420 mm ,bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed.Make:- Prayag / Nirali / Hindware

S&F in repair kitchen sinks made of stainless steel 1.00 mm thick kitchen or laboratory with plugs, washers and waste pipe, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm ,bowl size 410 mm x 360 mm x 160 mm complete all as specified and directed.Make:- Prayag / Nirali / Hindware

S&F in repair Pillar tap,15 mm bore, brass chromium plated, screwed down, high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed by Engr-in-Charge Make:- Prayag cat part no.7602 or equivalent make Hindware / Sona.

S&F in repairs CP Bib tap 15 mm bore, cast copper alloy with crutch or butterfly handle, fancy type, chromium plated, screwed down, high pressure, screwed for iron pipe complete all as specified and as directed. . Make:- Make:- Prayag Cat part No.7606 or equivalent model from make Sona / Hindware.

S&F in repairs CP Stop cock ( concealed type) ,15 mm bore, fancy type, chromium plated, screwed down, high pressure, screwed for iron pipe complete all as specified and as directed. . Make:- Make:- Prayag Cat part No.9218 or equivalent model from make Sona / Hindware.

S&F in repairs CP angular Stop cock ,15 mm bore, fancy type, chromium plated, screwed down, high pressure, screwed for iron pipe complete all as specified and as directed. . Make:- Make:- Prayag Cat part No.8010 or equivalent model from make Sona / Hindware.

S&F in repairs PVC connection 15mm size, 450 mm long with PTMT nuts complete all as specified and as directed.

S&F in repair 15 mm bore brass CP center hole basin mixer for mixing hot and cold water ,fancy type etc complete all as specified and directed. Make : Prayag cat part no. 7650 or equivalent modal of Sona / Hindware / Jaquar.

S&F in repair Tubular towel rail, brass chromium plated ,20mm dia, D type, 60cm long between flanges etc complete all as specified and as directed.Make: Prayag / Hindware / Sona.

S&F in repair kitchen plate rack made of stainless steel sheet 1.00 mm thick of over all size 31'' x 30'' x 10'' fixed to wall with brass screws etc complete all as specified and as directed.Make:- Prayag Cat part no. P-346 or Bluestar cat part No BSKPR-314 or equivalent make of Hindware / Nirali

S&F in repair Rotational moulded HDPE polyethylene 500 ltrs capacity water storage tanks three layered, (ISI marked) (cylindrical vertical with closed top) hoisted and fixed in position in SSR Part-I including ball valves 20mm dia high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball including 20mm dia GI medium grade over flow pipe, approx lenght 1.5 mtr, 25 mm dia wash out pipe with pluged at one end complete all as specified and directed.

S&F in repair rotational moulded polyethylene 1000 ltrs capacity water storage tanks , three layered, (ISI marked) (cylindrical vertical with closed top) hoisted and fixed in position in SSR Part-I including ball valves 20mm dia high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball including 20mm dia GI medium grade over flow pipe, approx lenght 1.5 mtr, 25 mm dia wash out pipe with pluged at one end complete all as specified and directed.

Cleaning and removing all scale and dirt etc from PVC/RCC/MS overhead tanks by using wire brush, bleaching powder or lime etc of required quantity and washing with clean water from tank and mouth of circulating pipe after disconnecting existing tanks, setting aside (or lowering if required) for repair, cleaning, etc and hoisting if required, reconnecting and refixing in position of capacity exc 500 n.exc 1000Ltrs incl writing "TC on -DD/MM/YY" with white synthetic enamel paint with 5 cm font in capital letters etc complete all as specified and directed.Note:- Proper record of cleaning of tank done under subject item shall be maintained in a register by sub division ,duly authenticated by user or user rep and Engineer-in-charge and shall be produced at the time of claiming any payments.

Cleaning and removing all scale and dirt etc from PVC/RCC/MS overhead tanks by using wire brush, bleaching powder or lime etc of required quantity and washing with clean water from tank and mouth of circulating pipe after disconnecting existing tanks, setting aside (or lowering if required) for repair, cleaning, etc and hoisting if required, reconnecting and refixing in position of capacity exc 1000 n.exc 2000 Ltrs incl writing "TC on -DD/MM/YY" with white synthetic enamel paint with 5 cm font in capital letters complete all as specified and directed.Note:- Proper record of cleaning of tank done under subject item shall be maintained in a register by sub division ,duly authenticated by user or user rep and Engineer-in-charge and shall be produced at the time of claiming any payments.

S&F in repair float valve of size 20mm, high pressure, with polyethylene float and fly nut complete, screwed for iron pipe all as specified and directed

S&F in repair float valve of size 25mm, high pressure, with polyethylene float and fly nut complete, screwed for iron pipe all as specified and directed

S&F in repair PVC nipple of size 15mm dia bore suitable for HDPE water storage tank etc complete all as specified and as directed.

S&F in repair PVC nipple of size 20mm dia bore suitable for HDPE water storage tank etc complete all as specified and as directed.

S&F in repair Gun metal gate valve class I (ISI) marked with iron wheel head, screwed both ends for iron pipe, suitable for 25 mm bore of pipe etc complete all as specified and directed by Engr-in-Charge.

S&F in repair Gun metal gate valve class I (ISI) marked with iron wheel head, screwed both ends for iron pipe, suitable for 20 mm bore of pipe etc complete all as specified and directed by Engr-in-Charge.

S & F in repair 110 mm bore PVC (SWR) bend of any radius with access door complete all as specified and directed.Make:- Prince / Supreme.

S & F in repair 110 mm bore PVC (SWR) pipe, single socketed, in any length with rubber ring joint fixed to walls including clamps for securing pipe complete all as specified and directed .Make:- Prince / Supreme.

S&F Anodised aluminium frame for doors,windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed

S&F Anodised aluminium window and ventilator shutters, fIxed type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips,rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings complete all as specified and upto the entire satisfaction of Engineer in charge.

S&F Anodised aluminium door shutters,aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges,anodised aluminum snap beadingscrews etc. complete all as specified and upto the entire satisfaction of Engineer in charge.

S&F Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips,rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100 mm long (2 no.) suitable handle (1 no.) complete all as specified and upto the entire satisfaction of Engineer in charge.

S&F Sheet glass,5.5 mm thick ,ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane including rubber packing and aluminium beadings etc complete all as specified and as directed.

S&F 12 mm thick Prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination fixed with screws to timber frame work etc complete all as specified and as directed.

S&F in repair door closer aluminium anodised extruded section hydraulially regulated,(ISI Marked) designation No 3, universal type suitable for door shutter of 851 to 1000mm width and of weight of between 61 to 80 kg and fixed all as specified and as directed

M&L for Wire brushing and cleaning top surface of tiles, lime terracing or cement concrete, including flashings and junction of parapets, etc., and surface painting, with a layer of hot blown bitumen of any penetration applied @ 1.7 kg per sqm. blinded with grit or pea size gravel @ 0.006 cu. m per sq. m, and lightly tampered (area of flashings, etc., shall be added to the roof area) etc complete all as specified and as directed.

Cleaning top surfaces of AC / CGI roof sheet / RCC slab including chajjas, parapet walls etc using wire brush and removing grass / alge and similar types of unwanted vegetation etc complete all as specified and directed by Engineer in charge.

Grubbing / trimming of tree, trunk including ( girth of trees n.exc 30 cm) portion protruding over ground / walls / roof etc , digging out roots, filling holes with cement sand mortar mixed with WPC compound ( If required) , levelling and makind good to disturbed surface true to existing etc , removing the same etc complete all as specified and directed by Engineer in charge.

S&F in repair CP over head showers dia around 100 mm round shape single flow ( ABS body chrome plated with grey face plate ) with rubit cleaning system with CP shower arm dia 20 mm long round shape without bend for wall mounted showers wall flange etc complete all as specified and as directed. Make: Jaquar Cat.No OHS-CHR-1989 with SHA-CHR-49483 or equivalent model from make Hindware / Prayag.

S&F in repair CP single lever wall mixer 3-in-1 system with provision for bath hand shower and overhead shower with 115 mm long bend pipe connecting legs and wall flange ( without hand & overhead shower) etc complete all as specified and as directed. Make: Jaquar Cat.part No OPP-CHR-15125PM or equivalent model from make Hindware / Prayag.

S&F in repair 15 mm bore health faucet cock with flexible pipe 1 meter long etc complete all as specified and as directed. Make: Jaquar Cat.part No ALD-CHR-565 or equivalent model from make Hindware / Prayag.

S&F in repair CP soap dish holder fixed on wall with CP screws etc complete all as specified and as directed. Make: Prayag Cat.part No BA-05 or equivalent model from make Hindware /Parryware.

S&F in repair stainless steel Toilet paper roll holder with fixed on wall with CP screws etc complete all as specified and as directed. Make:Jaquar Cat.part No AKP-35755PS or equivalent model from make Hindware /Parryware.

S&F in repair stainless steel Towel ring square shape with round flange with fixed on wall with CP screws etc complete all as specified and as directed. Make:Jaquar Cat.part No ACN-CHR-1121N or equivalent model from make Hindware /Parryware.

S&F in repair Sheet glass corner shelf assembly with ABC bracket complete all as specified and as directed. Make- Jaquar Cat Part No CAN-CHR-1173 or equivalent model from make Parryware / Hindware

S&F in repair Vitreous China EWC ( Europian Water Closet) including PVC seat cover closed pattern single piece size 755 x 365 x 655 etc complete all as specified and as directed. Make- Jaquar Cat Part No LYS-WHT-38851PSM or equivalent model from make Parryware / Hindware / Prayag.

S K Construction

MS HO Shadap

M/s J. C. CONSTRUCTION

M.K.JAIN