Providing cover shed for watchmen at LHS (16, 19, 23A, 25, 29, 30, 33, 35, 36, 42, 46 in JJP-LKQ Section and 73A, 79, 79A & 82 in JJP-NMA Section) and at Br. No.-88 (at KM-37/6-9 in LNO-JJP Block Section), Br. No-133 (at KM - 62/0-3 in GGH-NMA block Section) & Br. No. 10 at (KM-8/7 - 10/7 in NMA-SRGR Block).

B-CPWD-DSR-2023

Item Breakup - B-CPWD-DSR-2023

Jamuna sand, with common burnt clay non modular bricks. 11.7 Cement concrete pavement with 1:2:4 (1 cum 65 8595.15 558684.75 cement : 2 coarse sand : 4 graded stone 16 aggregate 20 mm nominal size), including finishing complete. 12.0 ROOFING 12.37S RAIN WATER SPOUT AND PIPE Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 12.41 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 17 12.41.2 110 mm diameter Metre 240 377.4 90576 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes 12.42 conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 12.42.5 Bend 87.5 degree 18 12.42.5.2 110 mm bend Each 48 150.35 7216.8 13.0 FINISHING 13.4S CEMENT PLASTER (IN COARSE SAND) 13.4 12 mm cement plaster of mix : 19 13.4.2 1:6 (1 cement: 6 coarse sand) Sqm 3500 343.65 1202775 CEMENT PLASTER WITH A FLOATING COAT OF 13.7S NEAT CEMENT 12 mm cement plaster finished with a floating 13.7 coat of neat cement of mix : 20 13.7.2 1:4 (1 cement: 4 fine sand) Sqm 410 425.55 174475.5 13.20S PEBBLE DASH PLASTER 13.26 Providing and applying plaster of paris putty of 2 Sqm 3500 262.7 919450 21 mm thickness over plastered surface to prepare the surface even and smooth complete. 13.44S EXTERIOR FINISHING Finishing with Deluxe Multi surface paint system 13.48 for interiors and exteriors using Primer as per manufacturers specifications : 13.48.1 Two or more coats applied on walls @ 1.25 ltr/10 Sqm 4500 193.7 871650 22 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved 13.81 brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. 23 13.81.1 Old work (one or more coats) Sqm 3500 62.7 219450 Painting with synthetic enamel paint of approved 13.99 brand and manufacture of required colour to give an even shade : 24 13.99.1 One or more coats on old work Sqm 600 102.8 61680 SAMASTIPUR DIVISION-ENGINEERING/EAST CENTRAL RLY 13.105 per 7500 3.85 28875 Re-lettering with black Japan paint of approved letter 25 brand and manufacture. per cm height 17.0 SANITARY INSTALLATIONS 17.1S General Providing and fixing white vitreous china water 17.13 closet squatting pan (Indian type) : 26 17.13.2 Orissa pattern W.C. pan of size 580x440 mm Each 18 3169.05 57042.9 18.0 WATER SUPPLY 18.31S C.I. SLUICE VALVES/ FIRE HYDRANTS & FIXTURES Boring with 100 mm diameter casing pipe for hand pump / tubewell, in all soils except ordinary 18.42 hard rocks requiring blasting, including removing the casing pipe after the hand pump / tube well is lowered and tested : 27 18.42.1 Up to 6 metres depth Metre 108 747.9 80773.2 28 18.42.2 Beyond 6 m and up to 12 m depth Metre 108 884.85 95563.8 29 18.42.3 Beyond 12 m and up to 18 m depth Metre 540 1025.95 554013 18.43 Providing and placing in position filters of 40 mm Metre 126 960.3 120997.8 30 diameter G.I. pipe with brass strainer of approved quality. 18.44 Providing and fixing to filter and lowering to Metre 900 546 491400 31 proper levels 40 mm G.I. pipe for tube well including cleaning and priming the tube well. 18.45 Providing and placing in position hand pump of Each 18 1321.65 23789.7 32 approved quality for 40 mm diameter G.I. pipe complete with all accessories. 20.0 PILE WORK 20.1S General Boring with hydraulic piling rigs with power units, providing and installing cast in situ single under reamed piles of specified diameter and length below pile cap in M-25 cement concrete, to carry a safe working load not less than 20.3 specified, excluding the cost of steel reinforcement but including the cost of boring with bentonite solution and the length of the pile to be embedded in pile cap etc. all complete. (Length of pile for payment shall be measured upto to the bottom of pile cap) : 33 20.3.1 300 mm dia piles Metre 270 3065.6 827712 Total 16626939.45