PROVISION OF STORE ROOM SERVER TOILET BLOCK BEHEND MAIN OFFICE AREA AND GUARD ROOM IN MT AND BATHROOM TOILET NEAR BUILDING NO BMH 12 OF HQ PUSCHIM UP SUB AREA UNDER AGE BR I AGE E M I OF GE NORTH MEERUT CANTT

Amount

Surface excavation in soft/loose soil n exc 30 cm deep and averaging 15 cm deep and getting out complete all as specified and directed.

Excavation in trenches n exc 1.5 m wide and n exc 1.5 m depth in soft/ loose soil for foundation etc or for shaft, wells, manholes,pier holes etc n exc 10 Sqm on plan and not exc 1.5 m in depth and getting out and levelling of bottom surface to required level complete all as specified and directed.

Returning ,filling in including spreading ,levelling watering and well ramming of soft/loose soil in layers n exc 25 cm thick each complete all as specified and directed.

M&L for sand (washed river) filling under floors or in paving n.exc 15 cm thick including watering and consolidation complete all as specified and directed.

M&L for moorum/red bajri filling in floors or paving, laid in layers n exc 15 cm thick , spread, levelled and rammed including watering etc complete all as specified and directed.

Removing excavated material ( spoil ) not exceeding 50 m distance and depositing where directed at a level n exc 1.5 metre above the starting point complete all as specified and directed.

M&L for hardcore of broken Stones of gauge n exc 63 mm , deposited spreaded , levelled in layers n exc 15 cm thick watered and rammed to a true surface complete all as specified and directed.

M& L for providing Cement concrete 1:4:8 Type D 2 (using 40 mm graded crushed stone aggregates) ,in foundations, filling and mass concrete complete all as specified and directed.

M&L for providing cement concrete 1:2:4 (nominal mix) Type B-1 (using 20 mm graded crushed stone aggregates) as in lintels up to 1.5 meter span, seismic bands,lintel bands & lacing courses, parapet railing, bed plates and similar items incl necessary form work complete all as specified and directed.

M&L for providing reinforced cement concrete design mix M-25 (using 20 mm graded crushed stone aggregates) foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, and mass concrete complete all as specified and directed.

M&L for providing reinforced cement concrete design mix M-25 (using 20 mm graded crushed stone aggregates) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, and in shelves and the like complete all as specified and directed.

M&L for providing reinforced cement concrete design mix M-25 (using 20 mm graded crushed stone aggregates)as in beams, cantilevers, bressummers, lintels over 1.5m clear span complete all as specified and directed.

M&L for providing reinforced cement concrete design mix M-25 (using 20 mm graded crushed stone aggregates)as in columns, pillars, piers, posts and struts complete all as specified and directed.

M &L for Brickwork with fly ash bricks old size bricks straight or curved on plan exc 6m mean radius built in Cement mortar 1:6 complete all as specified and directed.

-----------BLANK----------------

Supply only liquid water proofing compound complete all as specified and directed.

M&L for cutting chases, pinning in, in brick wall making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring. etc. and making good, cutting not exceeding 10cm girth complete all as specified and directed.

M&L for providing formwork to sides of concrete foundations, footings, bases of columns raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter rough finished surfaces of concrete flat complete all as specified and directed.

M&L for providing formwork to soffits of suspended slabs such as roof slab , floor slabs , landing ; chajjas and similar work not exc 200mm thick; rough finished surfaces of concrete flat complete all as specified and directed.

M&L for providing formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, exc 1.5m clear span cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc rough finished surfaces of concrete flat complete all as specified and directed.

M&L for providing formwork to sides of square ,rectangular or polygonal pillars, posts, struts, piers, and columns rough finished surfaces of concrete flat complete all as specified and directed.

M&L for providing formwork rough finished surfaces to edges of concrete flats, brick in floor cills, railing etc & similar works exc 10 cm but n.exc 20cm wide complete all as specified and directed.

S&F factory made glazed, gauzed and skeleton shutters 35 mm thick 2nd class hardwood (SAL/ CHAMP / HOLLOCK) open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chemfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a); for doors and fitted to chowkats complete all as specified and directed.

S&F plain, framed, panelled shutters (any number of panels), of 2nd class Hardwood 35mm thick with panels of timber flaton both sides (feather edges), or of veneered particle board medium density, wood particle board with commercial face veneers; and fitted to chowkats complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined to gether with solvent cement, suppling & fixing in the frame at site as per specification & as per SSR Part-II complete all as specified and directed.

S&F Solid PVC Door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & as per SSR Part-II complete all as specified and directed.

S&F anodised aluminium frame for doors , windows, ventilators with one or more rebates with and including weight of joining cleat for fixing etc complete all as specified and directed

S&F anodised aluminium door shutters, aluminium section weighing 0.55 kg/m with and including necessary joining aluminium cleats, aluminium glazing clips, ruber neoprene packing suitable size of aluminium, handles of size 150mm 2 Nos in each door, stainless steel hinges anodised aluminium snap beading for fixing glass panes / other filling material in panels, screws etc complete all as specified and directed. Note:- Glass panes / other filling materials in panels shall be measured and paid separately.

Supplied and fixed anodised aluminium window and ventilator with side hung shutters without sash bars aluminium section weighing 0.55 kg/RM with and including, necessary jointing cleat, glazing,clip, rubber packing,,anodised aluminium snap beading, screws anodised aluminium fittings such as peg stays 150mm long (1 no) hinges type B-21 100mm long (2 no) suitable handle (1 no) complete all as specified and directed. Note:- Glass panes / other filling materials in panels shall be measured and paid separately.

S&F 75mm, 4 levers, mortice brass lock vertical type complete all as specified and directed.

S&F 150mm long aluminium anodised barrel tower bolts of extruded section, having shoot / dia of bolt not less than 12mm complete all as specified and directed.

S&F 200mm long aluminium anodised barrel tower bolts of extruded section, having shoot / dia of bolt not less than 12mm complete all as specified and directed.

S&F 300 mm long mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed, complete all as specified and directed.

S&F stainless steel butt hinges of 100 mm size, complete all as specified and directed.

S&F butt hinges of 100 mm size, Medium weight, cold rolled mild steel. complete all as specified and directed.

S&F 150mm size extruded aluminium alloy handles, fabricated type., anodised complete all as specified and directed.

S&F brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges, complete all as specified and directed.

S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and directed.

S&F galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples including necessary beadings complete all as specified and directed.

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples including necessary beadings complete all as specified and directed.

S&F mild steel work as for framed work such as grills gratings, etc., with ends of bars shouldered and/ or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed baluster; walk ways; railings; framed work of water tanks and similar work including necessary riveting and / or welding conforming to Fe 290 (Gde-E 165) complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia and over, cut length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia quality conforming to Fe- 415, Fe 500 or Fe-550 as in steel reinforcement for concrete complete all as specified and directed. Note :- Weight of binding wire shall not be considered for measurement and payment purpose.

All as per Srl item No 42 here-in-before but 6mm to 8mm dia

All as per Srl item No 42 here-in-before but 5mm dia and over up to and including 10mm diaas in stirrups, spacers / binders.

S&F rolled mild steel in framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fitting (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening conforming to Fe-290 (Gde E-165) complete all as specified and directed.

S&F steel windows with side hung shutter including box type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded & including treated with tar or coal tar black paint on steel surfaces in contact / embeded in concrete or masonary work complete all as specified and directed.

S&F steel windows with side hung shutter including projection type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded and including treated with tar or coal tar black paint on steel surfaces in contact / embeded in concrete or masonary work complete all as specified and directed.

S&F steel ventilator with top hung shutter including hinges,. Steel peg stay and including treated with tar or coal tar black paint on steel surfaces in contact / embedded in concrete / masonary work complete all as specified and directed.

M & L for laying Non Skid ceramic tiles 7 to 8 mm thick, (square / rectangular) jointless area of each tile exc 0.06sqm but n.exc 0.11 sqm first quality coloured of grade B II (a) /B II (b) and of abrasion resistance - PE I -III or above , in floors etc, set in neat cement slurry over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed".

M & L for laying Non Skid ceramic tiles 7 to 8 mm thick, (square / rectangular) jointless area of each tile exc 0.11sqm but n.exc 0.18 sqm first quality coloured of grade B II (a) /B II (b) and of abrasion resistance - PE I -III or above , in floors etc, set in neat cement slurry over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed".

M & L for laying Non Skid ceramic tiles 7 to 8 mm thick, (square / rectangular) jointless area of each tile exc 0.18sqm but n.exc 0.36 sqm first quality coloured of grade B II (a) /B II (b) and of abrasion resistance - PE I -III or above , in floors etc, set in neat cement slurry over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed".

M & L for laying Non Skid ceramic tiles 7 to 8 mm thick, (square / rectangular) jointless area of each tile exc 0.18sqm but n.exc 0.36 sqm first quality coloured of grade B II (a) /B II (b) and of abrasion resistance - PE I -III or above , in vertical surface such as skirting / dados etc, set in neat cement slurry over and including 10mm thick screed bed in CM 1:4 complete all as specified and directed".

M & L for light shade vitrified tiles 10mm thick (square / rectangular) area of each tile exc 0.36 Sqm and n.exc 0.42 sqm first quality coloured in floors etc, set in neat cement slurry over and including 15mm thick screed bed in CM (1:6) complete all as specified and directed".

All as per Srl item No 53 here-in-before but on vertical surfaces such as skirting / dado over & including 10mm thick backing coat in CM 1:4

M&L for Glazed ceramic tiles coloured 300mmx 200mm , 6 to 7 mm thick first quality of grade B tiles on vertical surface such as skirting / dados etc set in neat cement slurry jointed & grouted with tile epoxy grout over & including 10mm thick backing coat in CM 1:4 complete all as specified and and directed

M&L for Glazed ceramic tiles coloured 300mmx 450mm X 7 mm thick first quality of grade B tiles on vertical surface such as skirting / dados etc set in neat cement slurry jointed & grouted with tile epoxy grout over & including 10mm thick backing coat in CM 1:4 complete all as specified and and directed

M&L for 75mm thick PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) as in sub base complete all as specified and directed.

M&L for laying 60 mm thick machine pressed precast PCC coloured interlocking paver block moulded in PVC frame / mould any shape and size conforming to IS 15658-2006 of M-35 grade of approved design with gray cement and pigment to match shade / colour / matrix of tiles set and bedded over and including 50mm thick fine river washed sand duly compacted with surface vibrator laid over compacted sub soil in flooring complete all as specified and directed. Make : NITCO, Mumbai ; Redsun tiles & Pavers, panchkula ; Star Tiles & Industries, Rama Devi, Kanpur ; Mayur tiles & Interlocking Pavers, Lucknow ; Mehatab tiles, indore ; Tulip Infrastructure, Saharanpur (U.P)

M&L for rendering 15 mm thick in cement mortar 1:6 on fair faces of brick work or concrete vertical surfaces, finished even and smooth without using extra cement complete all as specified and directed.

-----------------BLANK------------

-----------------BLANK------------

M&L for rendering 10 mm thick in cement mortar 1:4 on ceiling of brick or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM 1:4 mixed with liquid water proofing compound 200ml in 50kg cement and surface finished even and smooth without using extra cement complete all as specified and directed. Note : WPC shall be measured and paid separately

-----------------BLANK------------

M&L for preparing the new plastered surfaces and applying three coats of white lime washing on walls complete all as specified and direcrted.

M&L for three coats of white wash on newly plastered or unplastered surfaces of ceiling including preparation of surface complete all as specified and directed.

M&L for preparing the newly plastered surfaces and applying two coats of cement base paint on walls / vertical surfaces complete all as specified and direcrted.

M&L preparation of newly plastered surface of wall and applying two coat of oil emulsion distemper over a coat of chalk whiting complete all as specified and directed

M&L for applying two coats of plastic emulsion paint over 2mm thick birla white wall care putty including preparation of newly plastered surfaces of walls complete all as specified and directed.

M&L for preparation of newly plaster surfaces of walls and applying plaster of parris to finish even and smooth surfaces and applying two coat of exterior acrylic emulsion paint as per manufacturers instruction complete all as specified and directed

M&L for preparation of new wooden surfaces of any description not otherwise described over 10 cm in width or girth and applying two coat of white / tinted synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of new steel surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

S&F for 4 mm thick black tinted glass panes fixed to aluminium doors/ windows / vents with necessary rubber gaskets complete all as specified and directed.

M&L for 3 mm thick sheet glass, ordinary quality and glazing with oil putty or glazing pins in square n exc 0.5 sq. m in each pane complete all as specified and directed.

M&L for 3mm thick figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and directed.

Supplied and fixed GI water tubing 15 mm bore medium grade with all fittings fixed to walls and ceiling or laid in floors including cutting screwing and waste etc complete all as specified and directed.

Supplied and fixed GI water tubing 20 mm bore medium grade with all fittings fixed to walls and ceiling or laid in floors including cutting screwing and waste etc complete all as specified and directed.

Supplied, hoisted and fixed in position rotational moulded polyethylence water storage tanks IS : 12701 - 1996 marked (cylindrical vertical with closed top) of 500 Ltrs capacity with and including 20mm dia Ball valve high pressure of PTMT with apoxy aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 210 gms) complete all as specified and directed.

Supplied, hoisted and fixed in position rotational moulded polyethylence water storage tanks IS : 12701 - 1996 marked (cylindrical vertical with closed top) of 1000 Ltrs capacity with and including 20mm dia Ball valve high pressure of PTMT with apoxy aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 210 gms) complete all as specified and directed.

S&F bib taps, cast copper alloy with crutch or butterfly handle, sc-rewed down, screwed for iron pipe or for brass ferrule of 15 mm bore and fixed complete all as specified and directed.

-----------------BLANK------------

-----------------BLANK------------

Supply and fixed stop valves, 15mm bore dia, cast copper alloy, CP fancy type with long shank and cup(concealed type) screwd down,high pressure with crutch or butter fly handle,screwed down both ends for iron pipes or for unions and fixed in pipe complete all as specified and directed.

Supply and fixed angular valve, 15mm dia, cast copper alloy,CP fancy type with long shank and cup screwd down,high pressure ,screwed both ends for iron pipes or for unions and fixed in pipe complete all as specified and directed.

Supply and fixed gun metal globe or gate valves, 15mm bore dia, with iron wheel head, screwed both ends for iron pipes or for unions and fixed in pipe complete all as specified and directed.

S&F towel ring 200mm dia chromum plated fancy type conforming to the sample kept in the office of Engineer-in-Charge.

Supplied and fixed CP soap dish complete all as specified and directed.

Supplied and fixed swivel shower of brass chromium plated for fixing with 15 mm pipe ( min wt 40 gms )complete all as specified and directed.

S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

Supplied and fixed 110mm bore UPVC(SWR) pipes single socketed in any length with rubber ring joint, laid in trenches/under floor complete all as specified and directed.

Supplied and fixed 75 mm bore UPVC(SWR) pipes single socketed in any length with rubber ring joint fixed to wall complete all as specified and directed.

Supplied and fixed 110mm bore dia UPVC(SWR) pipes single socketed in any length with rubber ring jointed fixed to wall complete all as specified and directed.

Supplied and fixed 75 mm bore UPVC (SWR) pipes single socketed in any length with rubber ring jointed laid in trenches complete all as specified and directed.

Supplied and fixed 40 mm dia PVC pipe high density polyethlene pipes ( HDPE ) of pressure rating 6 Kgf / cm fixed to wall ceiling or laid in floor as waste pipe complete all as specified and directed.

Supplied and fixed 32 mm dia PVC pipe low density ( LDPE ) of pressure rating 6 Kgf / cm fixed to wall ceiling or laid in floor as waste pipe complete all as specified and directed.

Supplied and fixed UPVC (SWR) bends 110 mm bore complete all as specified and directed

Supplied and fixed UPVC (SWR) bends 75 mm bore complete all as specified and directed

Supplied and fixed PVC (SWR) 110 mm bore junction, single(single 'T') equal or unequal complete all as specified and directed

Supplied and fixed PVC (SWR) 75 mm dia junction, single(single 'T') equal or unequal complete all as specified and directed

Supplied and fixed UPVC (SWR) vent Cowl 110 mm bore complete all as specified and directed

Supplied and fixed UPVC (SWR) floor trap 75 mm bore including jointing to waste pipe fixed in cement concrete complete all as specified and directed

Supplied and fixed UPVC (SWR) floor trap 110 mm bore including jointing to waste pipe fixed in cement concrete complete all as specified and directed

Supplied and fixed vitreous china WHB, white, flat back size 550x400mm including cutting for and pinning in ends of bracket or erecting stand with and including angle iron brackets, duly painted with two coats of synthetic enamel paint over one coat red oxide zinc chrome primer cast copper alloy capastan head C.P brass pillar tap fency type 01 No 15mm bore, CP brass waste coupling 32mm dia, PVC waste pipe 32mm dia and PVC connection 450mm long high pressure with PTMT nut complete all as specified & directed.

-----------------BLANK------------

Supply and fixing vitreous china squatting pan, Orissa' pattern, size 580 x 440mm white, with integral foot rests with and including cast iron 'P' or 'S' trap and setting the trap and pan in and including PCC 1:4:8, type D-2 minimum 150mm thick all round and finished just below level of rim of pan to receive the floor finishing, making all connections complete all as specified and directed.

S&F vitreous china wash down water closet pan (padestal pattern), white with 'P' or 'S' trap (excluding flushing cistern and flush pipe) including connection to drain or out going pipe and to flushing pipe, antisyphonage pipe etc and including Plastic water closet seat cover black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device.

Supply and fixing PVC low level flushing cistern of 10 Ltr capacity syphonic action type with inlet ball valve, float and handle including PVC brackets for mounting of cistern complete all as specified and directed.

M&L for construction of septic tank for 25 users without sludge chamber including necessary earth work in any type of soil (soft / loose / hard / dense) and RCC cover slab in M-25 Design Mix complete all as shown on drg No TD-217 sheet 1/7 to 7/7 complete all as specified and directed.

Construction of septic tank for 100 users with sludge chamber including necessary earth work and RCC cover slab in M-25 Design Mix complete as shown on drg No TD-217 sheet 1/7 to 7/7 and directed. complete all as specified and directed.

M&L for providing concrete bed to drain pipe including packing under and haunching against the sides of pipes after they are laid and tested for 150 mm bore pipe in PCC 1:3:6 type C2 (using 40 mm graded crushed stone stone aggregates) complete all as specified and directed.

M&L for SGSW 'grade 'A' drain pipe 150 mm internal dia laid in trenches , jointed and tested complete all as specified and directed.

M&L for construction of Soakage well, excavated in ordinary soil, foundation PCC 1:3:6, walls of honey combed and solid brick work in CM, RCC cover slab in M-25 design mix, filling work with brick bats complete of size 2.4m dia x 6m depth (effective depth 4.5m) as directed by directed by Engr-in-Charge. Drg No Ref TD HQ CEBZ Drg No TD/309 sheet 1/4, 2/4, 3/4 & 4/4

-----------------BLANK------------

S&F 8mm dia, brass chromium plated health faucet with 1 meter long flexible hose and wall hook complete all as specified and directed Make - Jaquar, Parko, Gem or equivalent

S&F brass chromium plated toilet paper holder conforming to the sample kept in the office of Engg-in-Charge. complete all as specified and directed

M&L for point wiring with 1.5 Sqmm (nominal cross section area) single core, multi stranded PVC insulated, unsheathed copper conductor, FR cable in and including in rigid pvc conduit 20 mm dia or higher medium grade ISI marked complete with all steel conduit accessories / fittings and sunk pressed (1.2 mm thick) steel terminal switch boxes with 3 mm thick plastic laminated hard glossy surface sheet top cover, including earth wire continuous of PVC insulated, unsheathed 1.5 Sqmm copper conductor, PVC insulated connected to all fittings, sunken boxes and common earth, earth dolly. Plastic sheet screwed with brass screws, cup washers complete all as specified and directed for the following:- (a) One light/fan/exhaust fan/bell/buzzer point controlled by one, one way switches 5/6 Amps.

(b) All as per Srl item No 117 here-in-before but, One 3 pin 5/6 Amps socket outet point on independent board, controlled by one, one way 5/6 Amps modular switch.

(c) All as per Srl item No 117 here-in-before but, One 3 pin 5/6 Amps socket outlet point on same board, controlled by one, one way 5/6 Amp modular switch.

M&L for point wiring with 2.5 Sqmm (nominal cross section area) single core, multi stranded PVC insulated, unsheathed copper conductor,FR, cable in and in rigid pvc conduit 20 mm dia or higher medium grade ISI marked complete with all PVC conduit accessories / fittings and sunk pressed (1.2 mm thick) steel terminal switch boxes with 3 mm thick plastic laminated hard glossy surface sheet top cover, including earth wire continuous of PVC insulated, unsheathed 2.5 Sqmm copper conductor, PVC insulated connected to all fittings, sunken boxes and common earth, earth dolly. Plastic laminated sheet screwed with brass screws, cup washers complete all as specified and directed for the following :- (a) One 3 pin socket outlet, 15 amps, with cables 2.5 sqmm size on independent board, controlled by one, one way 15 amp switch.

(b) All as per Srl item No 120 here-in-before but One 3 pin socket outlet, 16 amps, with cables 4.0 sqmm size on independent board, controlled by one, one way 16 amp switch.

Material and labour for sub main wiring with 6.0 sqmm nominal cross sectional area, two single core, 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor FR-FLEXIBLE WIRING CABLE CONFORMING TO IS: 694-1990 with and including continuous earth wire of size 6.0 sqmm nominal cross sectional area, single core, PVC insulated, copper conductor cable, drawing into and including rigid non metallic PVC concealed conduit of 25 mm dia, PVC conduit accessories / fittings, brass screws, washers etc and connected to common earth dolly including all cutting/ chases etc in wall, making good to walls etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing complete all as specified & directe. Note :- One meter of conduit along with 2x6 sqmm wire and one 6 sq mm earth shall be measured as one unit length.

S & F Switch piano flush button single pole one way 5 amp complete all as specified and directed.

S & F Socket outlet 3 pin, 5 Amps, flush type complete all as specified and directed.

S & F Switch piano flush button single pole one way 15 amp complete all as specified and directed.

S & F Socket outlet 3 pin, 15 Amp, flush type complete all as specified and directed.

S & F ceiling rose, surface type, bakelite, 65 x 50 mm, three terminal complete all as specified and directed.

S & F lamp holder insulated body with back plate fix done anodised 100 x 100 mm pressed steel box flush to the wall with 3 mm thick backlite cover complete all as specified and directed.

Supply & fixing LED tube light fitting T/5 surface mounting poly carbonate 240 volts 20 watts, 6500K complete all as specified & directed.

Supplying & fix LED tube light fitting T/5 surface mounting poly carbonate batten 240 volts 10 watts, 6500K complete all as specified & directed.

M&L for security light fitting 1 x 45 LED type, drawn through and including GI bracket of size 25 mm dia bore light grade 1.4 mtr long, bend to shape including MS clamps made out of flat iron of size 32 x 4 mm - 02 Nos and necessary nuts, bolts, washer as required complete all as specified and directed.

M&L for security light fitting 1 x 25 LED type, drawn through and including GI bracket of size 25 mm dia bore light grade 1.4 mtr long, bend to shape including MS clamps made out of flat iron of size 32 x 4 mm - 02 Nos and necessary nuts, bolts, washer as required complete all as specified and directed.

Supply & fix LED lamp 9 W 6500k, 240V complete all as specified and directed.

S&F Fresh Air fan AC single phase 230/240V size 200 mm sweep with louvers, non metallic body & including making suitable hole in walls & necessary cement plastering etc. Make : Usha/Orient/Crompton Greaves.

Supply and fix flush type Electronic Regulator socket size AC , 240V complete all as specified and directed

-----------------BLANK------------

Supply and fix MCB single pole 240 volt 6 to 32 amps 10 KA. complete all as specified and directed

S&F for MCB DB double door type SPN 8 way sheet steel powder painted with bus bar neutral link & earth bar etc and fixing MCBs of various rating capacity pole complete all as specified and directed

Supply and fix MCB SPN 40 Amps, 240 volts, 50 Hz suitable for fixing in MCB DB 'C' series complete all as specified and as directed.

S&F MCCB 4 pole 125 Amps 16 KA 415 V, 50 Hz,with adjustable thermal & magnetic release, complete all as specified & directed.

S&F and grouting in wall sheet metal enclosure factory fabricated with single pole and neutral with a two pin and earth plug top and socket complete with and single pole MCB 20 Amps 240 volts all as specified and directed.

S&F Vertical triple pole and neutral DB's 4 way, 415 V, double door type suitable for mounting incoming MCCB and outgoing MCB's double pole/single pole, complete all as specified and directed.

Supply and laying XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) with aluminium conductor, 1100 volts, grade laid in trenches/ fixed in wall/ pole of cross sectional area of cable 25 Sqmm, 4 core complete all as specifeid and as directed.

Supply and laying XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) with aluminium conductor, 1100 volts, grade laid in trenches/ fixed in wall/ pole of cross sectional area of cable 16 Sqmm, 2 core complete all as specifeid and as directed.

Supply and laying XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) with aluminium conductor, 1100 volts, grade laid in trenches/ fixed in wall/ pole of cross sectional area of cable 10 Sqmm, 2 core complete all as specifeid and as directed.

S&F GI light grade tubing 40mm dia laid in trenches, road crossing , pasing through pipe or laid in wall/pole complete all as specified and directed

M & L for fly ash brick protection length of brick shall be laid across the length of cable) all as specified and directed.

Supply and spreading clean fine dry river sand in trenches for cushioning of under ground cable/ cable duct complete all as specified and as directed. Note: Only punned thickness shall be measured for payment purpose.

S & F LED pannel square, 2' x 2', Slim, compact, aluminium die cast edge lit pannel. Recess mounted sequire with opal diffuser and separate electronic driver 36W, 240V all as specified & directed.

S & F Ceiling fans 1200 mm sweep,AC , 230V, Energy saving, 50 watts all as specified and directed. Make : Orient/ Usha/ Havells / Crompton

Supply and fixing Hot and Cold Split unit Air conditioner electric driven, single phase of capacity of 1.5 TR , smart inverter compressor with stabilizer 5 KVA complete all as specified and as directed. Make of AC : Voltas/Blue star/LG Stablizer make : V-Guard / Microtech

Supply and fixing wall fan 400mm sweep, AC, 230V complete all as specified and as directed. Make : Orient/Usha/LG

S&F Water Heater Storage type, electric ,AC , 230V capacity 25 litres. BEE 5 star rated.Make: Bajaj/Venus/Havells.

Earthing complete with galvanised steel earth plate electrode 600X600X6 mm thick, burried directly in ground,earth pit not less than 2.25 meter deep below ground level with top edge of earth plate not less than 1.5 meter below ground level, steel earth plate connected with GI galvanised earthlead wire 4.0mm dia by means of bolts, nuts, check nuts and washer of galvanised iron or steel as shown in electrical plate No. 3 connected to earth test point all as described in MES schedule part II including excavation earth work concreate pit with 50 mm thick RCC cover in RCC 1:2:4 type B-I duly reinforced with MS TMT bars 8mm dia @ 150 C/C both ways and pit chamber in PCC 1:2:4 type B-I with 2 Nos suitable lifting handles of 12 mm MS bar and GI protection pipe of suitable size,and watering pipe 20 mm dia with water funnel test point and extra length up to 7.5 meter connected to main switch board all as specified. (Note : Main earth lead beyond 7.5 metre measured and paid for separately).

Jay Ambay Enterprises

Manglam Engineers and Construction Co

Arun Construction Co.

M/S AMAR ELEKTRO CENTRE

SHRI BALAJI ENTERPRISES