REPAIR TO ROOF, PLASTER, FLOORING , TILING , JOINERY ETC IN APPOINTMENT HOUSES UNDER AGE B/R-I OF GE ( NORTH) MEERUT CANTT

Amount

Taking down old existing water proofing treatment from the top of RCC/ arch slab, including taking down existing PCC padding or plaster and hacking the top of RCC slab, cleaning with water and disposal of rubbish off the premises complete all as specified & directed.

Material & Labour for nominal mix concretes 1:2:4 type B-O(using 12.5 mm graded stone aggregates) as in padding on roof finished even and fair without using extra cement complete all as specified & directed.

Material and Labour for 10mm thick cement paster in CM 1:4 mixed with WPC @ 200 ML per 50 Kg of cement finised even and smooth without using extra cement on roof surface complete all as specified and directed (WPC will be measured and paid seperately as supply only rate).

Supply only liquid water proofing compound complete all as specified & directed.

Material & labour for cleaning of concrete or plastered surfaces of roof and applying priming coat using with bituminous primer @ 0.30kg per Sqm followed evenly by a tack coat @ 1.20 kg per Sqm using 85/25 grade industrial hot blown bitumen , over it laid with 3mm thick APP modified polymeric water proofing membrane reinforced with non-woven polyester fabric (weight not less than 160 Gm per Sqm) unrolled & bonded to substrate with side and end laps 75mm & 100mm as per manufacturer’s instruction and applying over it a tack coat using 85/25 grade industrial hot blown bitumen bitumen @ 1.20 kg per Sqm and finally finished the top of polymeric water proofing membrane with a coat of bituminous aluminum paint @ 0.20 kg per Sqm as per manufacturer’s instructions, complete all as specified & directed. (including existing water tank on roof disconnected and after cleanig same position connecting)

Demolition of brick work or stone/boulder masonary built in cement mortar incl all quoins arches pillars etc.complete all as specified & directed.

M & L brick work with sub class fly ash bricks straight or curved on plan exc 6 m mean radis built in CM 1:6 complete all as specified & directed.

M&L old sizebrickwork with subclass `B' bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 except bricks Complete all as specified and directed.

Taking down of cement plaster of any description from brick or stone wall etc. including raking out of joints, hacking for key, scrubbing down with water etc complete all as specified & directed.

M & L 15 mm thick rendering in CM 1:4 on fair faces of brick or concrete surfaces finished even and fair complete all as specified & directed.

M & L for applying 15 mm thick rendering using ready mix plaster bags in CM 1:4 on brick / concrete surfaces of external walls finished even and fiar, using water proofing compound @ 3% by weight of cement or as per manufacturer instructions, complete all as specified and directed. Note:- Water proofing compound shall be measured and paid sepratly Note :- Contractor is required to deposit ready mix bags for 100% CA quantity to the Engr-in-Charge within 15 days of acceptance of contract.

M&L Rendering 5 mm thick on fair faces of concrete surfaces, finished even and smooth on ceiling in cement mortar (1:3), complete all as specified & directed.

Preparation of old surface after complete removal of existing treatment by mechanical complete all as specified and directed.

M&L for applying 3mm thick wall care putty making smooth surface complete all as specified and directed.

M&L for 1 coat of primer complete all as specified and directed.

M&L for Two coat of plastic emulsion paint complete all as specified and directed

M&L for one coat of OBD complete all as specified and directed

M&L for two coat of acrylic smooth two or more coat applied @ 1.67 ltr/ 10 sqm over and including primer coat of exterior primer applied @ 2.20 kg / 10 Sqm using roller for painting complete all as specified and directed.

M&L for one coat of acrylic smooth coat applied @ 1.67 ltr/ 10 sqm over using roller for painting complete all as specified and directed.

M & L Preparation of new plastered surface of wall by applying 2mm thick wall care putty and making the surface smooth and applying two coat of oil emulsion distemper over one coat of primer using roller for painting complete all as specified & directed.

M & L Preparation of new plastered surface of ceiling and applying two coat of WHITE WASH over one coat of primer using roller for painting complete all as specified & directed.

M & L Preparation of old plastered surface of ceiling and applying two coat of WHITE WASH over one coat of primer using roller for painting complete all as specified & directed.

M & L for Preparing old Plastered or unplastered surfaces of walls and applying one coat of white wash complete complete all as specified & directed.

M & L Preparation of old painted wood and wood base surfaces of any description, not otherwise described over 10 cm width or girth and painting with a coat of sythetic enamel paint complete all as specified & directed.

M&L for preparation of new wooden surface of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

Dismantling timber scantlings 40 sq.cm and over in section, in any position unframed work complete all as specified & directed.

M & L for Rolled mild steel in Roof trusses (framed), trussed,purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats similar work conforming to Fe 410 -W (Gde E- 250) quality A etc complete all as specified & directed.

M & L for in repair Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified & directed.

S&F MS angle iron as in door framed work conforming to Fe 290(Gde E-165) including hold fast tie rod, hinges and one shop of red oxide primer etc. complete as specified and directed.

Dismantling asbestos cement (corrugated, semi-corrugated, etc) sheet in roof coverings complete all as specified & directed.

S&F pre-painted galvalume aluminium zinc coating corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified & directed.

S&F pre-painted galvatume aluminium zinc coating plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall/ridges etc, fixed with self tapping screws complete all as specified & directed.

M&L for preparation of old steel and iron surfaces of any description, over 10 Cm in width or girth, not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide premier complete all as specified & directed.

M&L for preparation of new steel and iron surfaces of any description, over 10 Cm in width or girth, not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide premier complete all as specified & directed.

M & L for French polishing on surfaces of any description,width or girth including cleaning and preparing the surface including a coat of wood filler on old works with two or more coats complete all as specified & directed.

Taking down chowkhat or frames of door/ window with shutters (Without taking off shutter from the frame) exc 1.50 m and n.exc 4.00 Sqm each complete all as specified & directed.

Taking down chowkhat or frames of door/ window / ventilators with shutter(Without taking off shutter from the frame) n.exc 1.50 m each complete all as specified & directed.

Taking down shutters of any description exc 1.00 m and n.exc 2.00 Sqm complete all as specified & directed.

M & L for Anodised aluminium Powder Coating (minimum thickness of powder coating 50 micron) frame for doors,windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified & directed.

M & L for Anodised aluminium Powder Coating of Approved colour (Thickness or powder coating not less than 50 micron) sliding window and ventilator shutters, sliding (Two/Three) type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium and Sliding Arrangement Complete fittings as required complete all as specified & directed.

M & L for Anodised aluminium Powder Coating of Approved colour (Thickness or powder coating not less than 50 micron) door Shutter, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium Complete fittings as required complete all as specified & directed.

S&F for 5.00 mm thick, black tinted glass panes fixed to aluminium doors/windows/vents with necessary rubber gaskets complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) not exc 0.5 sq.m from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and directed.

M&L for 3mm thick figured glass, pin head type and glazing with oil putty in square not exc. 0.5 sq.m in each pane complete all as specified and directed.

S&F stainless steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm complete all as specified & directed.

All as per srl item No 45 but fixed in repairs complete all as specified & directed.

S&F, in repair, Double action floor spring, hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel, heavy duty and fixed complete all as specified & directed.

S&F for repair , Mortice lock, brass, four lever, verticle type, size 75mm complete all as specified and directed.

S&F in repair for hasp & staples 125mm in size, safety type alu. anodised fixed with screws complete all as specified & directed.

M&L in repair ,HOLLOW PVC Wall lining consisting of 5 mm thick plain colour pvc sheet inclusive of solvent cement and fixing at site on PVC Frame with 5mm pvc fillets as per specified and drawing shown as per page of SSR part II . complete all as specified and directed.

S&F in repair plastic seat cover black/white closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device complete all as specified & directed.

S&F in repair vitrous china wash hand basin white flat back, size 580x450mm including waster pipe , chromium plated waste coupling 32mm dia , bracket etc complete complete all as specified & directed.

S&F in repair PVC (Plastic polymer Cistern) valve less, Symphonic action type, flushing cistern of capacity 10 liters, low level, white with inlet, ball valve, manually operated with one PVC ball valve horizontal plunger type including provision of 32mm PVC flush pipe of required length and making connections complete, fixed in repairs complete all as specified & directed.

S & F for 30mm thick Factory made single extruded WPC (Wood Polymer Composite) solid Moulded WPC door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N edge),minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.(Note: stainless steel butt hinges and necessary S S screws shall be paid separately)

S & F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65X100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made

M & L in repair for 2nd class hardwood section not exc 3 Sq cm Plain fillets.square,rectangular ortriangular insection, clean sawn, secured with nails or brads, bull nosed, splayed,chamfered or rounded on one edge or face,complete all as Specified and directed.

M & L in repair for 2nd class hardwood section exc 3 Sq cm & not exc 6 Sq cm Plain fillets.square,rectangular ortriangular insection, clean sawn, secured with nails or brads, bull nosed, splayed,chamfered or rounded on one edge or face,complete all as Specified and directed.

M & L for 1st class wood hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified & directed.

S & F for 35 mm thick Flush shutters, solid core construction, with block board core and plywood face panels,commercial type on both sides face is covered with decorative face veneer with lipping/frame to match complete all as specified & directed.

S&F Glazed and skelton shutters 30 mm thick second class hard wood, opened rebated and prepared to receive wire mesh etc, edge of framing plain, chamfered or rounded, fitted with cut and mitred beads for sucuring witre mesh etc. Size of members of shutters as specified in SSR Part-I, Sec-8, clause 8.24(a) complete all as specified & directed.

S&F 100 mm butt hinges, meium weight Brass complete all as specified & directed.

S&F Brass barrel tower bolt 200 mm, extruded section complete all as specified & directed.

S& F 300mm long Brass, sliding door bolt with sand or die-cast brass hasp,staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as specified & directed.

S & F for 125mm Extruded brass handles,fabricated type polished complete all as specified & directed.

S&F, Mortice lock, brass, four lever, verticle type, size 75mm complete all as specified and directed.

S&F, in repair, aluminium (Die cast) body, Door closer, hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed complete all as specified & directed.

S&F, in repair for factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S tubes for top and bottom rails. M.S frame shall be covered with heat channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as a gap insert for top rail and bottom rail; Paneling of plain colour PVC sheet to be fitted in the M.S frame welded / sealed to the stiles and nails with suitable PVC sheet beading, and joined together with solvent cement, supplying and fixing in the frame at side as per specification and drawings complete all as specified & directed.

M& L in repair for Solid PVC Door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S square tube, supplying and fixing in opening as per specification and drawing complete all as specified & directed.

S&F, in repair,100 mm butt hinges, meium weight cold rolled mild steel complete all as specified & directed.

S&F, in repair, aluminium handle cast type anodised 125 mm long complete all as specified & directed.

S&F, in repair, aluminium anodised barrel tower bolt 150 mm, extruded section complete all as specified & directed.

S&F, in repair, Mild steel springs for doors, 150 mm, ordinary rat tail rod pattern springs including roller and roller plate complete complete all as specified & directed.

S&F, in repair, aluminium anodised barrel tower bolt 200 mm, extruded section complete all as specified & directed.

S&F, in repair, aluminium anodised sliding door bolts with hasp and stapple extruded section or cast aluminium alloy 300 mm long complete all as specified & directed.

Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing) removing serviceable tiles to store andd rubbish off the premises complete all as specified & directed.

M&L, Non-skid coloured ceramic tiles 7 to 8 mm thick square/ rectangular), area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm, in loors etc. set & jointed in net cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed in CM 1:6 complete as specified and directed.

M&L for light shade, vitrified tiles, 7 to 8 mm thick (minimum), (square/ rectangular) polished, area of each tiles exceeding 0.36 Sqm (including 600mmx600mm size) but not exceeding 0.42 Sqm, in flooring set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles and over and including 15mm thick screed bedding in CM (1:6) complete all as specified and directed.

M&L for ULTRA charged vitrified tiles 10mm thick (or thickness as specified by manufacture), (square/ rectangular) polished, area of each tiles exceeding 0.36 Sqm (including 1600mmx800mm size) but not exceeding 2 Sqm in flooring set and jointed in premium epoxy grout (Kajaria KE-100 or equivalent) to match the colour of tiles and including bedding of average thickness 6mm thick premium tile adhesive kajaria CX-1 or equivalent for laying of tiles on brick/concrete surface complete all as specified and directed. (Note: Rates Inclusive of Premium epoxy grout, premium tile adhesive and shall not be paid separately).

M&L for ,Double charged vitrified tiles, 10mm thick (minimum), (square/ rectangular) polished, area of each tiles exceeding 0.36 Sqm (including 1600x800 size) but not exceeding 2 Sqm, in flooring set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles and over and including 15mm thick screed bedding in CM (1:6) complete all as specified and directed.

M&L for vitrified tiles, 10mm thick (minimum), (square/ rectangular) polished, area of each tiles exceeding 0.36 Sqm (including 600mmx600mm size) but not exceeding 0.42 Sqm, in skirting/dado, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles and over and including 10mm thick rendering in CM (1:4) complete all as specified and directed.

M&L for glazed ceramic coloured tiles of size 450mm x 350mm x 7mm/600mmx300mmx7 mm on vertical surface such as skirting, dados, risers to steps etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, over and including rendering 10mm thick in cement mortar (1:4) , complete all as specified and directed.

.M&L for heavy duty, exterior grade ceramic tiles (Durastone of Somany/Endura of jhonson or equivalent as approved by GE) of size 300 x300x 10mm thick, set, jointed and pointed in neat cement slurry in trades, landing with white cement and pigment over and including screed bed or bedding layer of 15 mm thick cement mortar (1:6) complete all as specified and directed.

M&L for 18 -20mm thick BLACK/RED(LAKHA) granite factory made bull nosed, polished (table rubbed and polished) as in jambs, wall,window cills, cooking platform and the like etc in cement mortar 1:4 including pointing in white cement (1:2) using marble dust and admixture of pigment to match with shade of stone including rubbing and polishing over and including 10 mm thick rendering in cement mortar 1:4 including rounding of edges, making hole for gas pipe complete all as specified and directed.

M&L for rounding to edges of stone slabs two edge full round, such as in steps,cooking platform and other similar situation complete all as specified and directed.

Dismantling wall and ceiling boards(fibre, pulp, insulation, etc) or insulation boards/slabs/blankets any thickness, including cover fillets complete all as specified & directed.

M&L, in repair, 18/19mm thick Block Board exterior grade, one side with decorative choice (vaneers face) laminations and other side balanceing white lamination, fixed with screws to timber frame work in cup boards, rebated or flat edged fancy handle , Magnite lock complete all as specified and directed.

S&F in repair , continuous (piano) hinges, mild steel bright finish or electrogalvanised, width of flap 40 mm complete all as specified and directed.

Dismantling water tank of capacity exc 500 ltrs but not exc. 1000 Ltrs complete all as specified & directed.

S&F White rotational moulded polyethene water storage tank ( cylinderical verticle with closed top) hoisted and fixed in position all as specified in SSR Part-I. (Cap 500 ltrs capacity) complete all as specified & directed.

S&F White rotational moulded polyethene water storage tank ( cylinderical verticle with closed top) hoisted and fixed in position complete all as specified & directed. in SSR Part-I. (Cap 1000 ltrs capacity).

S&F in repair 20mm dia ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 15mm-142 gms/ 20mm-210 gms/25mm-455gms/ 40mm- 690 gms) complete all as specified & directed.

S&F in repair gun-metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed 20mm bore complete all as specified & directed.

Taking up or down steel tubing and connections for 20mm bore of pipe complete all as specified and directed.

Supplying and laying of 20 mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches and wall complete all as specified and directed.

M & L cutting chases for concealed water tubing, pinning in, making good of facings where required and pointing in cement mortar 1:3 to ends or edges etc, cutting not exceeding 10 cm width or girth, complete complete all as specified & directed.

S&F in repair angle valve 15mm bore brass chromium plated with captan head screwed for iron pipe complete all as specified & directed.

S&F stop valves chromium plated , 15 dia bore fixed in repairs complete all as specified & directed.

S&F in repair 15 mm dia brass chromium plated central hole wash basin mixture, fancy type with or without lettered 'Hot' or 'Cold' ,with long screwed shanks and fly nut capstanhead complete all as specified & directed.

S&F in repairs 15mm brass chromium plated bib cock with wall flange complete all as specified and directed. Make - Jaquar (Cat No- 5041).

Supply & fix15mm dia chromium plated fancy type wall mixer with over head shower for mixing hot and cold water screwed , fixing and connection to pipes complete all as specified and directed. Make Cera Cat Part No F-1017401, Pearl Cat Part No ARI-015, Hindware Cat Part No. F740022

S&F in repairs 15mm dia brass chromium plated central hole wash basin mixture fancy type with or without lettered 'Hot' or 'Cold', for mixing hot & cold water with long screwd shanks and fly nut capstan head or unions and screwed to walls complete all as specified and as directed. Make:- Cera Cat Part No F-2002461, Pearl Cat Part No ARI-013, Hindware Cat Part No- F-74 0009

S&F 15mm dia chromium plated fancy type wall mixer with over head shower for mixing hot & cold water screwed, fixing and connection to pipes complete all as specified and as directed. Make:- Cera Cat Part No F-1017401, Pearl Cat Part No ARI-015, Hindware Cat Part No- F-74 0022

S&F 15mm dia chromium plated fancy type sink mixer with swinging spout (wall mounted model) fixing and connection to pipes complete all as specified and as directed. Make:- Cera Cat Part No F 2004501, Pearl Cat Part No ARI-011, Hindware Cat Part No- F 330023

S&F in repair PVC connection 15 mm size with PTMT nuts 450 mm long complete all as specified & directed.

S&F in repair PVC Bath cabinet with mirror 18"x22"x4.25". Make: commander or equivalent complete all as specified and directed.

S&F in repairs, chromium plated towel rack of size 24" complete all as specified and directed. Make - Jaquar (Cat No-1181)

S&F in repair vitreous china ware EWC combined pattern complete with internal fittings as specified and directed by Engineer-in-Charge. Make : Cera of Cat Part No S101314L

S&F in repair for CP Health Faucet brass body with wall hook and one meter SS braided rubber hose pipe complete all as specified & directed. Cat Part No.CERA F8030301.

S&F in repair super special colours vitrous china wash hand basin white flat back, size 580x430mm including waster pipe , chromium plated waste coupling 32mm dia , with pedestal / bracket etc complete all as specified & directed..Cat part No. 1019A & 1109A Padestal.

S&F in repair stainless steel fancy type curtain rod, 20mm dia fixed with braket, incl taking down of old curtain rods complete all as specified & directed.

S&F in repair Toilet paper holder of brass chromium plated conforming to the samples kept in the office of Engineer-in-Charge.

S&F in repair Towel ring 200 mm dia chromium plated fancy type conforming to the sample kept in the office of Engineer-in-Charge.

S&F in repair sinks with drainage board made of stainless steel 1mm thick for kitchen with plugs, CP waste coupling, waste pipe and including in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mmx460mm bowl size 410mmx330mmx160mm complete all as specified & directed.

S&F, in repair, 1mm thick, stainless steel plate rack of size 1200mm x 900mm x 180mm complete all as specified and directed.

S&F in repair Sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified & directed.

S&F in repairs, corner glass shelf with bracket complete all as specified and directed. Make- Jaquar (Cat No- 1173)

S&F in repairs brass chromium plated soap dish complete all as specified and directed. make- Jaquar (Cat No- ACN-1131N)

S&F in repair for over head Shower complete all as specified & directed. Make:- CERA.

Dismantling of cast iron, PVC or reinforced concrete drain pipes jointed in cement mortar and taking out of trenches if required for 110mm and 75mm bore of pipe complete all as specified and directed.

S&F in repair ,110mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls including stack clamp complete all as specified and directed.

S&F in repair ,75mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints laying as in floor and complete all as specified and directed.

S&F in repair ,PVC(SWR) junction single, (Single T) equal or unequal provided with access door 110mm bore complete all as specified & directed.

S&F in repair, PVC(SWR) bends 110mm bore any radius complete all as specified & directed.

S&F in repair ,PVC(SWR) floor trap, 110mm bore, plain with grating including jointing with solvent cement complete all as specified & directed.

.Dismantling wall and ceiling boads (fibre, pulp, insulation etc.) or insulation boards/ slab/ blankets, any thickness including aluminium snap grid complete all as specified and directed.

Material and Labour 4MM THICK Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws complete all as specified & directed.

S&F Anodised aluminium snap grid frame workframe work for false ceiling complete all as specified & directed.

Taking down aluminium ventilators (with frame & shutters) for servicing by tightening loose fittings & aluminium sactions by tightening existing screws or providing new screws/aluminium cleats of appropriate size, cleaning, greasing/oiling (where required), easing & making functional and refixing in same opening complete all as specified & directed.

.S&F in repairs 8mm dia, brass chromium plated health faucet with 1 meter long flexible hose and wall hook complete all as specified and directed .

.S&F in repairs brass chromium plated bathroom wall (wall mounted model) mixture with telephonic shower arrangement only but without crutch etc. complete all as specified and directed. Make : Jaquar (Cat No-5281).

.S&F, in repair, vitreous china wash down water closet pan (Pedestal pattern), white with 'p' or 's' trap (excluding flushing cistern and flush pipe), including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe etc. complete all as specified and directed.

S&F brass chromium plated tubular towel rail 20mm dia 300mm long for wash hand basin area with brackets complete all as specified and directed. Cat No. CAN-1101N of Jaquar

S&F pillar Tap cast coppeer alloy with captan head chromium plated screwed down high pressure with or without lettered Hot or cold with long screwed shank and fly nut fancy type 15mm bore fixed in repair complete all as specified & directed.

.S&F in repairs brass chromium plated soap dish complete all as specified and directed.make- Jaquar (Cat No- ACN-1131N).

Demolition of cement concrete (un-reinforced) in ground floors and pavings not exc. 15cm thickness (below or above ground level) complete all as specified & directed.

M&L cement concrete 1:4:8, type D2(40mm graded stone aggregate) as in 75mm thick sub base complete all as specified & directed.

M&L for chequered cement concrete colour tiles glossy finish size 300mm cmx300mmx25 mm thick, with colour pigment, set, jointed and pointed in neat cement slurry over and including 20 mm thick screed bed in cm (1:6) complete all as specified & directed.

M&L machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 grade, with grey cement and pigment over and including 50mm thick river sand cusion and packing the edges/sides of the blocks with PCC 1:2:4 complete all as specified & directed.

M&L For Providing and fixing 10mm thick plaster of paris sunk or raised mouldingceiling (Gypsum anhydrous) to flat surface over 2nd class soft wood fillets, or metal frame work and reinforced with G.I. wire mesh (Fillets, metal frame work and G.I. wire mesh paid separately complete all as specified and directed.

S&F for Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surroundingwall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55mm thickness having kurledweb of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre tocentre. complete all as specified and directed by engr -in charge.

M&L TOUCH SCREEN LED LOOKING MIRROR in wall mounted Anti Fog bathroom mirror with lights,lighted makeup mirror dimmable frameless smart touch mirror complete all as specified and directed.

M&L for exterior wall cladding tiles brick pattern of any colour approved by engr-in-charge of size 300x600x10 mm thick mat finishes over 10mm thick heavy duty chemical resistant adhensive for fixing tile on wall complete all as specified and directed.

S&F at site and on position floor mounted vanity counter made of Superior Material Quality with HDHMR (High Density High Moisture Resistant) of size 770x451x680mm/800x470x680mm having vitreous china basin on top with SS cabinet & side cabinet and soft close door & drawers of approved pattern and design with necessary fixing arrangment complete as per direction of Engr-in-charge. (Note: wash basin to be paid separately)

S & F in 12mm thick toughned glass as in fixed glass, hinged doors, partitions, automatic doors, windows and similar work including cutting to shape, drilling holes, including single leg spider, ceiling/bottom to glass connector and pivots, glass to glass connector, stabilizer rod, floor clamp, plastic parts, wall to glass hinge, knob, roller, floorspring (With S.S. Cover), C Shape Square SS Handle - 450mm etc. all fittings for doors/partitions (including SS fittings) required to make functional all as specified and directed

S&F Towel Rack 600mm Long with Lower Hangers, Stainless Steel complete all as specified and directed. Make: jaquar ACN-CHR-1181S

S&F in repair Soap Dispenser with Glass Bottle complete all as specified & directed.. Make : Jaquar Cat Part NoACN-CHR-1135N

S&F in repair Toilet Roll Holder complete all as specified & directed. Make : Jaquar Cat Part No ACN-CHR-1151N

S&f in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf chromium plated bracket guard and railing 60cm long complete all as specified & directed.. Make- Jaquar AKP-CHR-35771P

S&F in repair Wall hung modern ceramic EWC including seat cover hidden flush tank, inlet,outlet and complete internal fittings as per manufacturer instuctions complete all as specified & directed. by Engineer-in-Charge. Make : Cera /Parryware / Hindware/Jaquar

S&F Mortise lock with set with Pair of 8100 Mortise Lever Handles, 271a lock with 55mm backset and 60mm EPC with one side thumb turn and one side key, Fire resistance BSEN 1634:1:2000 Certified Satin Finish Mortise Lock body approximate size of back set 45 mm X 85 mm, with 52 mm Lock and 26 mm brass latch , Stainless steel main & Strike plate & including back to back fixing feature suitable for minimum door thickness 30 mm Single door shutter with necessary fixings, screw as required to complete the work complete all as specified & directed.

S&F powder coated approved colour anodised aluminium partition with sash bars, aluminium sections weighing 0.55 Kg/mtr (minimum) incl fixed with , clips, frame , necessary joining cleats, glazing clips, neoprene rubber gasket with aluminium beading screws suitable anodised fittings such as hinges, handles including powder coated anodised aluminium frame with one or more rebates including S&F 5.50 mm thick plain/tinted glass complete all as specified and directed.

M&L for Ceramic glazed wall tiles including designer/digital/HD/Polished tiles (thickness as specified by the manufacturer), area of each tiles exceeding 0.18 Sqm but not exceeding 0.72 Sqm in flooring set and jointed in premium epoxy grout (Kajaria KE-100 or equivalent) to match the colour of tiles and including laying over cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness bedding on brick/concrete surfaces complete all as specified and directed. (Note: Rates Inclusive of Premium epoxy grout, premium tile adhesive and shall not be paid separately).

S&F in repair 2 mm thick Fibre glass reinforced translucent corrugated sheeting with two corrugation side lap fixed with coach screw and washer in roof wall etc complete all as specified and directed.

S&F 15mm dia chromium plated fancy type Bath & Shower Mixer including Telephone Shower Crutch & Shower Kit (9537N & 571), Wall Mounted for mixing hot & cold water screwed, fixing and connection to pipes complete all as specified and as directed. Make:- Jaquar QQT-CHR-7267SHK or equivalent as approved

M&L injecting chemical emulsion for Post Constructional Anti-termite Treatment Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified & directed.

Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement :2 coarse sand) to match the existing floors soil complete all as specified & directed.

Treatment the soil under plinth protection at the rate of 5 litres of emultion per square meter of surfaces area complete all as specified & directed.

jitendra AND Co

VIRAT CONSTRUCTIONS

SA construction co.

Arun Construction Co.

AMBEY CONSTRUCTION

ATHARV CONSTRUCTION

Shri Kanchan Engineers